Aston Martin DB11 2021 ISOFIX Anchors User Guide
ISOFIX Anchors
Warning: An unsecured child seat is dangerous. In a sudden stop or a collision it could move, causing serious injury or death to the child or other passengers. Make sure the child seat is correctly secured in place according to the manufacturer’s instructions.
Warning: When installing the child seat, make sure that there are no seat belts or foreign objects near or around the ISOFIX anchors. If seat belts or a foreign object prevents the child seat from being securely attached to the ISOFIX anchors, the child seat could move in a sudden stop or collision causing serious injury or death to the child or other passengers.
Warning: Make sure that the child seat tether strap is always used when installing a child seat with ISOFIX anchors.
Front Seats (Optional)
The passenger seat is equipped with ISOFIX (International Standards Organization FIX) anchors for the installation of child seats. The anchors (A) are located between the seat base and the seat back.
Front Passenger Seat Installation
To install a child seat to the front using ISOFIX, use the procedure that follows:
- The passenger airbag MUST be set to OFF (Refer to ’Passenger Airbag Deactivation’, page 3.20).
- Move the passenger seat to its fully rearward and lowest position. Fully lower the front of the seat cushion.
- Fully recline the back of the seat (the front of the seat will move forward until the seat back is fully reclined).
- Follow the child seat manufacturers instructions and install the child seat into the passenger seat.
- Move the passenger seat backwards. The back of the passenger seat will then rise. Continue to move the seat back until the child seat is supported by the back of the passenger seat.
Rear Seats
This vehicle is equipped with ISOFIX (International Standards Organization FIX) anchors for the installation of child seats on the rear passenger seats. The anchors are located between the seat base and the seat back. The position of the anchors is shown by two tags at the base of each rear seat.
Remove the lower seat back panel (A).
The seat back trim panels are left and right-handed. Secure the child seat using the ISOFIX anchors (B), following the child seat manufacturer’s instructions.
Rear Passenger Seat Installation
When a child seat is installed to the rear seat using ISOFIX, you must move the seat directly in front of the child seat depending on the size seat being installed.
For Size Class E (R1 Fixture) ISOFIX SEATS:
Coupe Only
- Move the base of the seat directly in front of the child seat to its fully forward and lowest position.
- Move the base of the seat to its highest position.
- Adjust the back of the seat to it’s fully forward position.
For Size Class B/B1 (F2/F2X Fixture) ISOFIX SEATS:
- Move the base of the seat directly in front of the child seat to its lowest position.
- Move the base of the seat as far forward as possible
- Adjust the back of the seat to a fully vertical position.
Tether Anchors
Warning: An infant or child that is not properly restrained can be seriously injured or killed in a crash. Seat belts are designed for adults and larger children; infants and smaller children must be restrained in an approved child safety seat.
Warning: Child restraint anchorages are designed to withstand only those loads imposed by correctly installed child restraints. Under no circumstances are they to be used for adult seatbelts, harnesses or for attaching other items or equipment to the vehicle.
Warning: Always follow the child seat manufacturer’s instructions. Not following the child seat manufacturer’s instructions when installing the child seat is dangerous.
Warning: Make sure the child seat tether strap is free from obstructions above and below. Do not place any items on the tether strap between the child seat and the tether anchor point. Do not place the tether strap over any items between the child seat and the tether anchor point.
Warning: An unsecured child seat is dangerous. In a sudden stop or a collision, it could move, causing serious injury or death to the child or other passengers. Make sure the child seat is correctly secured in place according to the manufacturer’s instructions.
Warning: When installing the child seat, make sure that there are no seat belts or foreign objects near or around the ISOFIX anchors. If seat belts or a foreign object prevents the child seat from being securely attached to the ISOFIX anchors, the child seat could move in a sudden stop or collision causing serious injury or death to the child or other passengers.
Warning: Make sure that the child seat tether strap is always used when installing a child seat with ISOFIX anchors.
A tether is a strap that connects the top of a child seat to a tether anchor point on the vehicle to reduce excessive movement of the child seat in the event of a collision. The purpose of a tether strap is to provide additional protection for the child seat occupant in the event of a serious impact. The tether strap is supplementary to the seat belts. Your vehicle has a tether anchor point for the front seat 1 and both rear passenger seats2.
Front Seats (Optional)
The tether anchor point for the passenger seat is located at the rear base of the passenger seat. Move the seat forward to access the tether anchor point. Route the tether strap through the opening in the seat back as shown. Engage the tether clip to the anchor point at the bottom of the passenger seat back (A) and make sure that the locking spring has fully closed to prevent accidental disengagement. Always make sure that the tether strap length is adjusted to remove any slack. The tether anchor adjuster (B) must go through the opening. Any adjustment must be made from the rear of the seat.
Rear Seats (Coupe Only)
The tether anchor point for the rear passenger seat is located behind the top of the rear seats. The covers for the anchors are embossed with the tether anchor symbol.
Push down on the front of the cover for the tether anchor to release the spring clip. Remove the cover for the tether anchor (B)
Engage the tether clip to the anchor point at the top of the parcel shelf (C) and make sure that the locking spring has fully closed to prevent accidental disengagement. Always make sure that the tether strap length is adjusted to remove any slack.
To refit the cover for the tether anchor, insert the two tabs into the slots. Push down on the front of the cover to lock.
Genesis 2023 Top Accessories
[amalinkspro_table id=”32446″ new-window=”on” nofollow=”on” addtocart=”off” /]
Reference Links
View Full User Guide: Aston Martin DB11 2021 User Guide
Download Manuals: https://www.astonmartin.com/en/owners/owners-guides
