BMW 3 Series 2020-2023 Displaying Speed Limit Info User Manual

BMW-logo

BMW 3 Series 2020-2023 Displaying Speed Limit Info User Manual

Displaying Speed Limit Info

General information
Depending on the vehicle equipment, Speed Limit Info is displayed permanently in the instru‐ment cluster or via iDrive.

Activating

  1. “CAR”
  2. “Settings”
  3. “Driver Assistance”
  4. If necessary, “Driving”
  5. “Speed Limit Assistance”
  6. “Speed limits”
  7. “Show current limit”

Display Speed

Limit Info

Current speed limit.
Without a navigation system the traffic signals are grayed out after curves or longer stretches of roadway.BMW 3 Series 2020-2023 Displaying Speed Limit Info User Manual 01

BMW 3 Series 2020-2023 Displaying Speed Limit Info User Manual 02BMW 3 Series 2020-2023 Displaying Speed Limit Info User Manual 03Depending on the equipment, Speed Limit Info not available.
If the detected speed limit has been exceeded, the indicator light will flash.

Settings

  1. “CAR”
    “Settings”
  2. “Driver Assistance”
  3. If necessary, “Driving”
  4. “Speed Limit Assistance”
  5. Select the desired setting:
  •  “Warn when speeding”: activate/deactivate the flashing of the Speed Limit Info display in the instrument cluster and, where applicable, the Head-up Display when the currently valid speed limit is exceeded. The warning that is issued when a speed limit is exceeded may depend on the Speed Limit Assistant settings. “Excess speed display”: the speed limit that is detected by the Speed Limit Info is displayed with a marking in the speedometer in the instrument cluster.

System limits
System limits of the sensors

Additional information:
Cameras, refer to page 37.

  1. Functional limitations
    The system may not be fully functional and may provide incorrect information in the following situations:
  2. When traffic signs are fully or partially concealed by objects, stickers or paint.
  3. When driving very close to the vehicle in front of you.
  4. In the case of navigation data that is invalid, outdated or not available.
    In areas not covered by the navigation system.
  5. When roads differ from the navigation, such as due to changes in road layout.
  6. In case of electronic traffic signs.
    When passing buses or trucks with traffic signs applied to them.
    When the traffic signs do not correspond to the standard.
    When traffic signs that are valid for a parallel road are detected.
    In the presence of country-specific road signs or road layouts.

Selection lists

  1. Concept
    Lists can be displayed and, if necessary, used for certain functions in the instrument cluster or the Head-up Display.
  2. Entertainment source.
    Current audio source.
  3. List of most recent telephone calls.
  4. If necessary, the corresponding menu will open on the Control Display.

Display

Depending on the equipment version, the list in the instrument cluster may differ from the illustration.
Displaying and using the list
The lists can be displayed and operated using the buttons on the steering wheel.

Trip data

Principle
Values for the trip, such as the average consumption or trip kilometers, are displayed.

General information
The trip data can be displayed on the Control Display and in the instrument cluster.
The values can be displayed and reset depending on various intervals, such as after refueling.

Display on the Control Display

Overview
The following information is displayed depending on the equipment and the set interval and driving mode:BMW 3 Series 2020-2023 Displaying Speed Limit Info User Manual 01

  1. Configured interval for displaying trip data.
    Average fuel consumption depending on the configured interval.
    Average speed.
    Total time for shut off engine through the Auto Start/Stop function.
  2. Distance traveled in Coasting mode.
    Consumption history in form of a chart.

Displays

  1. “CAR”
  2. “Driving information”
  3. “Trip data”

Consumption history
The average consumption is shown in the consumption history in form of a chart based on the distance traveled and the driving mode.

Display in the instrument cluster

Depending on the equipment, information about the route can be displayed as widget in the instrument cluster.
The following information is displayed:

  • Total kilometers.
    The configured interval for displaying trip data.
  • Torque.
    Power.

Displays

  1. “CAR”
    “Driving information”
    “Sport displays”

Instrument cluster with enhanced features: Display in the instrument cluster
The Sport displays can be displayed in form of widgets in the instrument cluster.

The following widgets can be selected:

Leave a Reply

Your email address will not be published. Required fields are marked *