BMW 3 Series 2020-2023 Maximum cooling User Manual

BMW-logo

BMW 3 Series 2020-2023 Maximum cooling User Manual

Maximum cooling

Principle
The system is set to the lowest temperature, optimum airflow and recirculated air mode with the drive-ready state switched on.

Functional requirement

The system is available at outside temperatures above approx. 32 ℉/0 ℃ and with the drive-ready state switched on.

Switching maximum cooling on and off

BMW 3 Series 2020-2023 Maximum cooling User Manual 01Press the button.

The LED is illuminated when maximum cooling is switched on.
Air flows out of the air vents to the upper body region. The air vents need to be open for this.
The airflow can be adjusted with the program active.

AUTO program

Principle
The AUTO program cools, ventilates, or heats the car’s interior automatically. The airflow, air distribution, and temperature will be controlled automatically depending on the interior temperature and the setting for the desired temperature.

Switching the AUTO program on and off

Using the button:

BMW 3 Series 2020-2023 Maximum cooling User Manual 02Press the button.

The LED of the button is illuminated with the AUTO program switched on.
Via iDrive:

  1. “CAR”
  2. “Settings”
  3. “Climate control”
  4. “Heating/ventilation”
  5. “Automatic”

Depending on the selected temperature and outside influences, the air is directed to the windshield, side windows, upper body, and into the floor area.
Point the side air vents toward the side windows.
The cooling function is switched on with the AUTO program.
The AUTO program is switched off automatically when manual air distribution is set.

Air recirculation mode

Principle
You may react to unpleasant odors or pollutants in the immediate environment by temporarily suspending the supply of outside air. The system then recirculates the interior air.
When recirculated-air mode is switched off, fresh air is directed into the vehicle’s interior.

Switch air recirculation on and off
Using the button:

Press the button.
The LED of the button is illuminated when the air-recirculation mode is switched on.

Via  iDrive:

  1. “CAR”
  2. “Settings”
  3. “Climate control”
  4. “Air quality”
  5. Select the desired setting:
  6. “Air recirculation”
  7. “Fresh air”

To prevent window fogging, recirculated-air mode switches off automatically after a certain amount of time, depending on the environmental conditions. With constant air recirculation mode, the air quality in the car’s interior deteriorates, and window fogging increases. If there is window condensation, switch off recirculated-air mode or defog the windows.

Airflow, manual

Principle
The airflow for climate control can be adjusted manually.

Adjusting the airflow manually

BMW 3 Series 2020-2023 Maximum cooling User Manual 04Press the lower or upper side of the button: to decrease or increase airflow.

The selected airflow is shown on the climate control display.
The airflow may be reduced automatically to save battery power.

Manual air distribution

Principle
The air distribution for climate control can be adjusted manually.

Adjusting the air distribution manually

BMW 3 Series 2020-2023 Maximum cooling User Manual 05Press the button repeatedly. Select the desired setting:

  1. Windows, upper body region, and floor area.
  2. Upper body region and floor area.
  3. Floor area.
  4. Windows and floor area.
  5. Windows.
  6. Windows and upper body.
  7. Upper body region.

The selected air distribution is shown on the climate control display.

Defrost function

Principle
Ice and condensation are quickly removed from the windshield and the front side windows.

Switching the Defrost function on and off

BMW 3 Series 2020-2023 Maximum cooling User Manual 06Press the button.

The LED of the button is illuminated when the system is switched on.
The airflow can be adjusted manually with the system switched on.
If there is any window condensation, switch on the air conditioning. Make sure that air can flow to the windshield.

Rear window defroster

Principle
Ice and condensation are removed from the rear window quickly.

Functional requirement

The function is operational when the drive-ready state is switched on.

Switching the rear window defroster on and off

Press the button. The LED is illuminated with the rear window defroster switch on. The rear window defroster switches off automatically after a certain period of time. Microfilter The microfilter removes dust and pollen from the incoming air. Has this filter changed during vehicle maintenance?

Reference Links

View Full User Guide: BMW 3 Series 2020-2023 User Manual

Download Manuals: https://www.bmwusa.com/owners-manuals.html

Leave a Reply

Your email address will not be published. Required fields are marked *