Auto User Guide

BMW 3 Series 2020-2023 With Mild-Hybrid Technology User Manual

BMW-logo

BMW 3 Series 2020-2023 With Mild-Hybrid Technology User Manual

With Mild-Hybrid Technology

Engage selector lever position N

  1. Press and hold down brake pedal.
  2. Press and hold the Start/Stop button.
  3. With your free hand, press the button on the selector lever, arrow 1, and press the selector lever into selector lever position N and hold, arrow N, until selector lever position N is dis‐played in the instrument cluster.BMW 3 Series 2020-2023 With Mild-Hybrid Technology User Manual 01
  4. Release Start/Stop button and selector lever.
  5. Release the brake.
  6. Maneuver the vehicle from the danger area and secure it against moving on its own.

Additional information:
Tow-starting/towing, refer to page 368.

Launch Control

Principle
Launch Control enables optimum acceleration on roads with good traction under dry surrounding conditions.

General information
The use of Launch Control causes premature component wear since this function represents a very heavy load for the vehicle.
Do not use Launch Control during the break-in.
Do not steer the steering wheel when driving off with Launch Control.

Additional information:
Breaking-in period, refer to page 302.

Functional requirement
Launch Control is available when the engine is at operating temperature. The engine is at operating temperature after an uninterrupted trip of at least 6 miles/10 km.

Start with launch control

  1. Turn on drive readiness.
  2. BMW 3 Series 2020-2023 With Mild-Hybrid Technology User Manual 02Press the button.
    TRACTION is displayed in the instrument cluster and the indicator light for DSC OFF lights up.
  3. Engage selector lever position S.
  4. With the left foot, forcefully press down on the brake.
  5. Press and hold down the accelerator pedal beyond the resistance point at the full throttle position, kickdown.
    A destination flag is displayed in the instrument cluster.
  6. The starting engine speed adjusts. Wait briefly until the engine speed is constant. Keep the accelerator pedal in this position.
  7. Release the brake within 3 seconds after the destination flag illuminates.
    The vehicle accelerates.
    Upshifting occurs automatically as long as the destination flag is displayed and the accelerator pedal is not released.

Repeated use during a trip
After Launch Control has been used, the transmission must cool down for approx. 5 minutes before Launch Control can be used again. Launch Control adjusts to the surrounding conditions, when used again.

After using Launch Control

To increase driving stability, activate DSC Dynamic Stability Control again as soon as possible.
System limits
An experienced driver may be able to achieve better acceleration values in DSC OFF mode.

Displays

Vehicle features and options

This chapter describes all standard, country-specific and optional features offered with the series. It also describes features and functions that are not necessarily available in your vehicle, e.g., due to the selected options or country versions. This also applies to safety-related functions and systems. When using these functions and systems, the applicable laws and regulations must be observed.

Instrument cluster

General information
Depending on the vehicle equipment, it may be possible to deactivate the display change in the instrument cluster via iDrive.
Some of the displays in the instrument cluster may differ from the illustrations in the Owner’s Manual.

Instrument cluster with enhanced features: OverviewBMW 3 Series 2020-2023 With Mild-Hybrid Technology User Manual 03

  1. Fuel gauge  159
    Range  162
  2. Speedometer
  3. Central display area  149
    Navigation display
  4. Depending on the equipment: Driver Attention Camera
  5. Tachometer  159
    Selection lists  165
    Widgets  150
    Trip odometer, see Trip data  166 ECO PRO displays  308
    Power gauge  160
    Status, Driving Dynamics Control  133 Transmission display  142
  6. Engine temperature  161
  7. Outside temperature  162
  8. Check Control  153
  9. Speed Limit Assistant  228
    Speed Limit Info  164 Time  63.

Instrument cluster without enhanced features: OverviewBMW 3 Series 2020-2023 With Mild-Hybrid Technology User Manual 05

  1. Fuel gauge  159
  2. Speedometer
  3. Check Control  153
    Widgets  151
    Service notifications  163 Navigation display
    Shift lights  160 Range  162
  4. Tachometer  159
    Power gauge  160
  5. Engine temperature  161
  6. Outside temperature  162
    Transmission display
    Status, Driving Dynamics Control  133 Time  63
  7. Speed Limit Info  164

This chapter describes all standard, country-specific and optional features offered with the series. It also describes features and functions that are not necessarily available in your vehicle, e.g., due to the selected options or country versions. This also applies to safety-related functions and systems. When using these functions and systems, the applicable laws and regulations must be observed.

[amalinkspro_table id=”32452″ new-window=”on” no follow=”on” addtocart=”off” /]

Reference Links

View Full User Guide : BMW 3 Series 2020-2023 User Manual

Download Manuals: https://www.bmwusa.com/owners-manuals.html

Leave a Reply

Your email address will not be published. Required fields are marked *