BMW 8 Series Convertible 2022-2023 Trunk Emergency Unlocking User Manual

BMW-logo

BMW 8 Series Convertible 2022-2023 Trunk Emergency Unlocking User Manual

Trunk Emergency UnlockingBMW 3 Series 2020-2023 Trunk Emergency Unlocking User Manual 01

Pull the handle inside the cargo area.
The trunk lid unlocks.

Soft-close automatic function

Safety information
Warning
Body parts can be jammed while operating the doors. There is a risk of injury. Make sure that the area of movement of the doors is clear during opening and closing.

Closing
To close the doors, push lightly. Closing occurs automatically.

Valet parking mode

Principle
In the valet parking mode, the Control Display is disabled. The operation via iDrive is no longer possible.
E.g., this mode can be used when the vehicle is handed over for valet parking.

General information
In the valet parking mode, it is not possible to change vehicle settings via iDrive. Personal profiles cannot be changed. Personal data cannot be displayed.

Additionally, the following actions are carried out:

  1. The volume of the audio system is limited.
  2. The integrated Universal Remote Control is deactivated.
  3. DSC cannot be switched off.
  4. Depending on the vehicle, the trunk lid can be locked and disconnected from the central locking system.

Functional requirements

  1. At least one driver profile has been created.
  2. A driver profile or the guest profile is active.
  3. At least one driver profile has an assigned ConnectedDrive account.

Accessing the menu for the valet parking mode

Via the switch-off screen
After switching off the drive-ready state the switch-off screen will be displayed. Select the entry for the valet parking mode on the switch-off screen.

Via the display bar at the upper edge of the Control Display

  1. Tip the Controller up.
  2. “Valet parking mode”

Via the vehicle settings

  1. “CAR”
  2. “Settings”
  3. “General settings”
  4. “Valet parking mode”

Activating the valet parking mode

General information
Before activating the valet parking mode, a PIN must be set up to be able to deactivate the valet parking mode at a future time.
The procedure for entering the PIN varies depending on the active driver profile.

Driver profile with PIN
A PIN has been stored for the active driver profile.
It is not necessary to enter another PIN.

  1. “Lock tailgate as well”
    The trunk lid will be locked and disconnected from the central locking system.
  2. “Activate now”

Driver profile without PIN
A PIN must be assigned to the driver profile.

  1. “PIN”
  2. Enter PIN.
  3. “Lock tailgate as well”
  4. “Activate linkage”
  5. “Activate now”

Guest profile
The guest profile is the active driver profile. A PIN must be entered.

  1. “PIN”
  2. Enter PIN.
  3. “Lock tailgate as well”
    The trunk lid will be locked and disconnected from the central locking system.
  4. “Activate now”
    This PIN can be used once to deactivate the valet parking mode for the active guest profile.

Deactivating valet parking mode

General information
The lock screen of the valet parking mode is displayed on the Control Display.
The deactivation of the valet parking mode depends on which driver profile is selected on the lock screen.

Driver profile with PIN
Regardless of which driver activated the valet parking mode, a driver can deactivate the valet parking mode by entering his/her PIN.

  1. Select driver profile.
  2. Enter the assigned PIN for the driver profile.

If you forgot the PIN, the valet parking mode must be deactivated by entering the assigned ConnectedDrive access data.

Driver profile without PIN
The valet parking mode was activated by another person. To deactivate the valet parking mode, a driver without a PIN has to enter the access data for his ConnectedDrive account.

  1. Select driver profile.
  2. Enter the ConnectedDrive access data assigned to the driver profile.

Guest profile
In the guest profile, the valet parking mode can only be deactivated if the valet parking mode was activated in the guest profile.

  1. Select guest profile.
  2. Enter the PIN that was specified during activation.

If the PIN has been forgotten, the valet parking mode must be deactivated via a personal driver profile.

Settings

General information
Depending on the vehicle equipment and country version, various settings for opening and closing are possible.
These settings are stored for the driver profile currently used.

Reference Links

View Full User Guide: BMW 8 Series Convertible 2022-2023 User Manual

Download Manuals: : https://www.bmwusa.com/owners-manuals.htm

Leave a Reply

Your email address will not be published. Required fields are marked *