Auto User Guide

BMW 8 Series Convertible 2022-2023 Lane departure warning User Manual

BMW-logo

BMW 8 Series Convertible 2022-2023 Lane departure warning User Manual

Lane Departure Warning

Principle
The lane departure warning alerts when the vehicle is about to run off the road or exit the lane.

General information
This camera-based system warns to start at a minimum speed. The minimum speed is country-specific and is displayed in the menu for the intelligent Safety systems. Warnings are issued by means of a steering wheel vibration. The severity of the steering wheel vibration can be adjusted. The system does not provide a warning if the turn signal is set in the respective direction be‐fore leaving the lane. Depending on the equipment version, if in the speed range up to 130 mph/210 km/h a lane marking is crossed, the system may intervene with a brief active steering intervention in addition to vibrating. The system thus helps keep the vehicle in the lane.

Safety information

Warning
The system cannot serve as a substitute for the driver’s personal judgment in assessing road and traffic situations. There is a risk of an accident. Adjust driving style to traffic conditions. Watch traffic closely and actively intervene where appropriate. Do not jerk the steering wheel in response to a warning.

Warning
Indicators and warnings cannot serve as a substitute for the driver’s personal judgment. Due to its limits, the system may not issue warnings or reactions, or these may be issued late or in a manner that is not consistent with their normal use. There is a risk of an accident. Adjust driving style to traffic conditions. Watch traffic closely and actively intervene where appropriate.

Functional requirement
The camera must detect the lane markings for the lane departure warning to be active.

Overview

Button in the vehicle

BMW 3 Series 2020-2023 Lane Departure Warning User Manual06

Intelligent Safety

Sensors
The system is controlled by the following sensors:

  • Cameras behind the windshield. Additional information:
    Sensors of the vehicle, refer to page 37.
  • Turning on/off

  • Turning on automatically
    The lane departure warning activates automatically after departure if the function was switched on at the completion of the last trip.
    Depending on the national-market version, the system is automatically active after every driving off. The base setting is thereby activated.
  • Switching on manually
  • BMW 3 Series 2020-2023 Lane Departure Warning User Manual01Press the button.
  • The menu for the Intelligent Safety system is displayed.
    If all Intelligent Safety systems were switched off, all systems are now switched on.
    “Configure INDIVIDUAL”: depending on the equipment version, the Intelligent Safety sys‐tems can be individually configured. The individ‐ual settings are activated and stored. As soon as a setting is changed on the menu, all settings of the menu are activated.
  • BMW 3 Series 2020-2023 Lane Departure Warning User Manual01
  • Press the button repeatedly.
  • The following settings are switched between:
  • “ALL ON”: all Intelligent Safety systems are switched on. Basic settings are activated for the subfunctions.
    “INDIVIDUAL”: the Intelligent Safety systems are switched on according to the individual settings.
    Some Intelligent Safety systems cannot be individually switched off.
  • Manual switching off
  • BMW 3 Series 2020-2023 Lane Departure Warning User Manual01
  • Press and hold this button.
  • All Intelligent Safety systems are switched off.BMW 3 Series 2020-2023 Lane Departure Warning User Manual4
  • Setting the warning time

  1. “CAR”
  2. “Settings”
  3. “Driver Assistance”
  4. “Safety and Warnings”
  5. “Lane Departure Warning”
  6. Select the desired setting:
    • “Early”
    • “Medium”
    • “Reduced”: some warnings are sup‐pressed depending on the situation, for instance when purposely driving over lane markings in curves or with dynamic passing without blinker.
    • “Off”: no warnings are issued.

Setting the intensity of the steering wheel vibration

  1. “CAR”
  2. “Settings”
  3. “Driver Assistance”
  4. “Steering Wheel Feedback”
  5. “Vibration intensity”
  6. Select the desired setting.

The setting is applied to all Intelligent Safety systems.

Switch steering intervention on/off

The steering intervention can be switched on and off separately for Active Blind Spot Detection and lane departure warning.

  1. “CAR”
  2. “Settings”
  3. “Driver Assistance”
  4. “Safety and Warnings
  5. “Lane Departure Warning”
  6. “Steering intervention”

Depending on the national-market version, the steering intervention is automatically active after every driving off.

Display in the instrument cluster

The icon illuminates green: at lane marking was detected on at least one side of the vehicle and warnings can be issued.

Warning function

If you leave the lane
If you leave the lane and if a lane marking has been detected, the steering wheel vibrates in accordance with the steering wheel vibration setting.
When the turn signal is switched on in the corresponding direction before changing the lane, a warning is not issued.

Reference Links

View Full User Guide : BMW 8 Series Convertible 2022-2023 User Manual

Download Manuals: : https://www.bmwusa.com/owners-manuals.html

Leave a Reply

Your email address will not be published. Required fields are marked *