Auto User Guide

2023 BMW X5 PLUG-IN HYBRID Operating Condition Guidelines

BMW-Logo

BMW X5 PLUG-IN HYBRID 2023 Operating condition of the vehicle

The 2023 BMW X5 Plug-in Hybrid is the result of a lot of hard work by engineers and new ideas about how to make cars more environmentally friendly. It is intended to give drivers a good mix of electric efficiency and dynamic performance. The different ways it can be used show how flexible it is. The X5 is a great example of how adaptable a car can be, from the best temperature ranges for its hybrid engine to the fact that it can move around on electric power alone. When you consider how complicated it is to handle different terrains and weather conditions—whether it’s the cold of winter, the heat of summer, or the challenges of high altitudes—it’s clear that this vehicle is made not just for the ordinary but for the special. Also, BMW makes sure that drivers can enjoy performance, efficiency, and safety in almost any situation with features like regenerative braking and safety features for wet conditions. This car was made for the modern world and was designed to be flexible in settings that are always changing.

2023 toyota BZ4x Specs, Price, Features and Mileage (Brochure)

Vehicle features and options

This chapter describes all standard, country-specific and optional features offered with the series. It also describes features and functions that are not necessarily available in your vehicle, e.g., due to the selected options or country versions. This also applies to safety-related functions and systems. When using these functions and systems, the applicable laws and regulations must be observed.

General information
Depending on the situation, the vehicle is in one of the three states:

  • Idle state.
  • Standby state.
  • Drive-ready state.

Idle state

Principle
When the vehicle is in idle state, it is switched off.

General information
The vehicle is in idle state prior to opening from the outside and after exiting and locking.

Safety information 

Warning
An unsecured vehicle can begin to move and possibly roll away. There is a risk of accident. Before leaving the vehicle, secure the vehicle against rolling away. In order to ensure that the vehicle is secured against rolling away, follow the following:

  • Set the parking brake.
  • On uphill grades or on downhill slopes, turn the front wheels in the direction of the curb.
  • On uphill grades or on downhill slopes, also secure the vehicle, for instance with a wheel chock.

Warning
Unattended children or animals in the vehicle can cause the vehicle to move and endanger themselves and traffic, for instance due to the following actions:

  • Pressing the Start/Stop button.
  • Releasing the parking brake.
  • Opening and closing the doors or windows.
  • Engaging selector lever position N.
  • Using vehicle equipment.

There is a risk of accidents or injuries. Do not leave children or animals unattended in the vehicle. Take the vehicle key with you when exiting and lock the vehicle.

Automatic idle state
For instance, the idle state is automatically es-tablished under the following conditions:

  • After several minutes, if no operation takes place on the vehicle.
  • If the charge state of the vehicle battery is low.
  • Depending on the configuration via iDrive: one or both front doors will be opened after driving when exiting the vehicle. In some situations, the idle state is not set automatically, for instance during a phone call or when the low beams are switched on.

Establishing idle state when opening the front doors
After a trip, the sleep mode can be established by opening the front doors. For this purpose, the driver and front passenger must exit the vehicle.

  1. “CAR”
  2. “Settings”
  3. “Doors/ vehicle access”
  4. “Turn off vehicle after opening door”

Manual idle state
To establish idle state in the vehicle after com-pletion of trip:

BMW-X5-PLUG-IN-HYBRID-2023-Operating-condition-of-the-vehicle-fig-1Press and hold the button on the radio until the OFF indicator on the instrument cluster goes out.

Standby state

Principle

When standby state is switched on, most func-tions can be used while the vehicle is station-ary. Desired settings can be adjusted.
General information
The vehicle is in the standby state after the front doors are opened from the outside.

Standby, manual

General information
Standby can be switched back on after the ve-hicle is automatically set to idle state.

Via button on the radio 

  • BMW-X5-PLUG-IN-HYBRID-2023-Operating-condition-of-the-vehicle-fig-1Press the button on the radio. The control display and the instrument cluster illuminate.
    Via start/stop button
  • BMW-X5-PLUG-IN-HYBRID-2023-Operating-condition-of-the-vehicle-fig-2Press the Start/Stop button. The control display and the instrument cluster illuminate.
    Display in the instrument cluster
  • BMW-X5-PLUG-IN-HYBRID-2023-Operating-condition-of-the-vehicle-fig-3OFF is displayed in the instrument cluster. The drivetrain is switched off and standby state switched on.

Drive-ready state

Principle
The following are the different drive-ready state variants:

  • Electric drive-ready state.
    The vehicle is powered by an electric mo-tor.
  • Starting of combustion engine.
    The vehicle is powered by a combustion engine.

Safety information

DANGER
If the exhaust pipe is blocked or ventilation is insufficient, harmful exhaust gases can penetrate the vehicle. The exhaust gases contain pollutants which are colorless and odorless. In enclosed areas, exhaust gases can also accumulate outside of the vehicle. There is a danger to life. Keep the exhaust pipe free and ensure sufficient ventilation.

Warning
When driving in electric mode, pedestrians and other road users might pay less attention to the vehicle due to the lack of engine noise. There is a risk of accident. Adjust driving style to traffic conditions. Watch surrounding traffic closely and actively intervene where appropriate.

Warning
An unsecured vehicle can begin to move and possibly roll away. There is a risk of accident. Before leaving the vehicle, secure the vehicle against rolling away.
In order to ensure that the vehicle is secured against rolling away, follow the following:

  • Set the parking brake.
  • On uphill grades or on downhill slopes, turn the front wheels in the direction of the curb.
  • On uphill grades or on downhill slopes, also secure the vehicle, for instance with a wheel chock.

Warning
Unattended children or animals in the vehicle can cause the vehicle to move and endanger themselves and traffic, for instance due to the following actions:

  • Pressing the Start/Stop button.
  • Releasing the parking brake.
  •  Opening and closing the doors or win-dows.
  • Engaging selector lever position N.
  • Using vehicle equipment.

There is a risk of accidents or injuries. Do not leave children or animals unattended in the vehicle. Take the vehicle key with you when exiting and lock the vehicle.

Turning on the drive-ready state

  1.  Close the driver’s door.
  2. Depress the brake pedal.
  3. Press the Start/Stop button.
    Most of the indicator/warning lights in the instrument cluster illuminate for a varied length of time depending on the duration of the system check.

Depending on the prerequisite, the electric drive-ready state or a combustion engine start is possible.

2023 toyota BZ4x Specs, Price, Features and Mileage (Brochure)

Electric drive-ready state

General information
The vehicle is ready for driving without starting the combustion engine.

Functional requirements
Electric drive-ready state is possible, if the pre-requisites for electric driving are fulfilled.

Additional information:
BMW eDRIVE

Display in the instrument cluster

BMW-X5-PLUG-IN-HYBRID-2023-Operating-condition-of-the-vehicle-fig-4When the drive-ready state
is switched on, READY is dis-played in the instrument cluster.

Combustion engine start

Functional requirements
The combustion engine is started under the following conditions when the drive-ready state is switched on:

  • The temperature of the hybrid system is too high or too low.
  • The charge state of the high-voltage battery is insufficient.

Turning off drive-ready state

  1. Engage selector lever position P with the vehicle stopped.
  2. Set the parking brake.
  3. Press the Start/Stop button.

After parking the vehicle, you may hear noises due to operation of the hybrid system, such as for cooling of the high-voltage battery.

FAQ

What is the optimal operating temperature for the engine?

The BMW X5 Plug-in Hybrid is designed to operate efficiently at coolant temperatures of around 90°C to 110°C.

How long does it take for the hybrid battery to fully charge?

Depending on the charger and power source, it can vary, but a typical home charging unit might take a few hours for a complete charge.

Is it safe to operate the vehicle in extremely cold temperatures?

While the vehicle is designed for various climates, extremely cold temperatures may impact battery performance and range. Preconditioning the cabin and battery can help optimize performance.

Can the BMW X5 Plug-in Hybrid operate in electric-only mode?

Yes, there is an eDrive mode that allows for purely electric driving, given the battery has sufficient charge.

How does high altitude affect the vehicle’s performance?

While turbocharged engines, like those in many BMWs, are less affected by altitude than naturally aspirated ones, there may still be slight changes in performance at higher altitudes.

What is the maximum towing capacity?

The exact capacity can vary by configuration, but one should always refer to the vehicle’s user manual for specific figures.

Is the vehicle equipped with a regenerative braking system?

Yes, the BMW X5 Plug-in Hybrid features regenerative braking, which captures energy during braking to help recharge the battery.

How often should I check the tire pressure to ensure optimal operating conditions?

Monthly checks are typically recommended, but one should also check before long trips or when there’s a noticeable change in driving performance.

Can the vehicle operate efficiently in extremely hot climates?

Yes, but very high temperatures can influence battery range. The vehicle is designed to manage heat effectively, though it’s wise to park in shaded areas and precondition the cabin when possible.

How does the vehicle handle in off-road conditions?

While the BMW X5 Plug-in Hybrid offers advanced driving dynamics and can handle various terrains, it’s primarily designed for on-road driving.

Is it safe to operate the hybrid system in wet conditions?

Yes, the hybrid system is sealed and designed to be safe in typical wet conditions like rain. However, driving through deep standing water is discouraged.

Does the fuel type used affect the vehicle’s operating condition?

Always use the recommended fuel grade specified in the owner’s manual to ensure optimal performance and longevity.

How does driving in Sport mode affect the hybrid battery’s range?

Sport mode may prioritize performance over efficiency, which could result in faster battery depletion.

What happens if the vehicle runs out of fuel with a charged battery?

The vehicle can still operate in electric mode until the battery is depleted.

Are there any specific maintenance requirements for operating in harsh conditions (like salted roads in winter)?

After driving on salted roads, it’s advisable to wash the vehicle’s undercarriage to prevent corrosion. Regular maintenance checks should also be more frequent if consistently operating in harsh conditions.

Useful Link

BMW X5 PLUG-IN HYBRID 2023 User Guide

https://www.bmwusa.com/owners-manuals.html

2023 toyota BZ4x Specs, Price, Features and Mileage (Brochure)

Leave a Reply

Your email address will not be published. Required fields are marked *