Auto User Guide

Cadillac CT5 2023 Child Restraints and Storage User Guide

LOGO

Cadillac CT5 2023 Child Restraints and Storage User Guide

The Cadillac CT5 2023 is a luxury sedan that is specifically engineered to provide a comfortable and safe driving experience for all occupants, including children. To ensure the safety of children while on the road, the CT5 is equipped with a comprehensive system of child restraints. This system includes a LATCH (Lower Anchors and Tethers for Children) system that enables easy installation of child seats in the back seat, as well as front and side airbags that provide additional protection in the event of a collision. In terms of storage, the CT5 offers ample space throughout the vehicle for families to store their luggage or other items. The vehicle features a spacious trunk with 11.9 cubic feet of storage capacity, along with various storage compartments such as a center console with cup holders, glove compartment, and door pockets. Furthermore, the CT5 also offers optional storage solutions like a rear-seatback storage system, a trunk organizer, and a cargo net, providing further convenience and organization. Overall, the Cadillac CT5 2023 is a highly practical and secure choice for families that prioritize convenience and safety. Its child restraint system and various storage options make it an ideal option for families who are looking for a comfortable and safe driving experience.

Child Restraints

Older ChildrenChild Restraints

Older children who have outgrown booster seats should wear the vehicle’s seat belts. Refer to How to Wear Seat Belts Properly 0 45. The manufacturer instructions that come with the booster seat state the weight and height limitations for that booster.

Use a booster seat with a lap-shoulder belt until the child passes the fit test below:

  • Sit all the way back on the seat. Do the knees bend at the seat edge? If yes, continue. If no, return to the booster seat.
  • Buckle the lap-shoulder belt. Does the shoulder belt rest on the shoulder? If yes, continue. If no, try using the rear seat belt comfort guide, if available. See “Rear Seat Belt Comfort Guides” under Lap-Shoulder Belt 0 50. If a comfort guide is not available, or if the shoulder belt still does not rest on the shoulder, then return to the booster seat.
  • Does the lap belt fit low and snug on the hips, touching the thighs? If yes, continue.
    If no, return to the booster seat.
  • Can proper seat belt fit be maintained for the length of the trip? If yes, continue.
    If no, return to the booster seat.

Q: What is the proper way to wear seatbelts?
A: An older child should wear a lap-shoulder belt and get the additional restraint a shoulder belt can provide. The shoulder belt should not cross the face or neck.
The lap belt should fit snugly below the hips, just touching the top of the thighs.
This applies belt force to the child’s pelvic bones in a crash. It should never be worn over the abdomen, which could cause severe or even fatal internal injuries in a crash.
Also, see “Rear Seat Belt Comfort Guides” under Lap-Shoulder Belt 0 47.
According to accident statistics, children are safer when properly restrained in a rear seating position. In a crash, children who are not buckled up can strike other people who are buckled up, or can be thrown out of the vehicle. Older children need to use seat belts properly.

Warning
Never allow more than one child to wear the same seat belt. The seat belt cannot properly spread the impact forces. In a crash, they can be crushed together and seriously injured. A seat belt must be used by only one person at a time.Child Restraints32

Warning
Never allow a child to wear the seat belt shoulder belt under both arms or behind their back. A child can be seriously injured by not wearing the lap shoulder belt properly. In a crash, the child would not be restrained by the shoulder belt.
The child could move too far forward increasing the chance of head and neck injury. The child might also slide under the lap belt. The belt force would then be applied right on the abdomen. That could cause serious or fatal injuries. The shoulder belt should go over the shoulder and across the chest.Child Restraints

Infants and Young Children

Everyone in a vehicle needs protection! This includes infants and all other children. Neither the distance traveled nor the age and size of the traveler changes the need, for everyone, to use safety restraints. In fact, the law in every state in the United States and in every Canadian province says children up to some age must be restrained while in a vehicle.

Warning
Children can be seriously injured or killed the shoulder belt is worn behind their back, under their legs, or wrapped around their neck. The shoulder belt can tighten but cannot be loosened if it is locked. The shoulder belt locks when it is pulled all the way out of the retractor. It unlocks when the shoulder belt is allowed to go all the way back into the retractor, but it cannot do this if it is wrapped around the child. Never leave children unattended in a vehicle and never allow children to improperly wear, or play with, seat belts.

Every time infants and young children ride in vehicles, they should have the protection provided by appropriate child restraints.
Neither the vehicle’s seat belt system nor its airbag system is designed for them. Children who are not restrained properly can strike other people, or can be thrown out of the vehicle.

Warning
Never hold an infant or a child while riding in a vehicle. Due to crash forces, an infant or a child will become so heavy it is not possible to hold it during a crash.
For example, in a crash at only 40 km/h (25 mph), a 5.5 kg (12 lb) infant will suddenly become a 110 kg (240 lb) force on a person’s arms. An infant or child should be secured in an appropriate child restraint.Child Restraints

Warning
Children who are up against, or very close to, any airbag when it inflates can be seriously injured or killed. Never put a rear-facing child restraint in the front passenger seat. Secure a rear-facing child restraint in the rear seat.
It is also better to secure a forward-facing child restraint in a rear seat. If a forward-facing child restraint must be secured in the front passenger seat, always move the front passenger seat as far back as it will go.Child Restraints5

If a child restraint is installed in the second row center seat, move the second row seat to the rearward position, whenever possible, to minimize contact with the front center airbag. Child restraints are devices used to restrain, seat, or position children in the vehicle and are sometimes called child seats or car seats.

There are three basic types of child restraints:

  • Forward-facing child restraints
  • Rear-facing child restraints
  • Belt-positioning booster seats

The proper child restraint for your child depends on their size, weight, and age, and also on whether the child restraint is compatible with the vehicle in which it will be used. For each type of child restraint, there are many different models available. When purchasing a child restraint, be sure it is designed to be used in a motor vehicle and is designed by a genuine child restraint manufacturer. If it is, the child restraint will have a label saying that it meets federal motor vehicle safety standards.
The instruction manual that is provided with the child restraint states the weight and height limitations for that particular child restraint. In addition, there are many kinds of child restraints available for children with special needs.

Warning
To reduce the risk of neck and head injury in a crash, infants and toddlers should be secured in a rear-facing child restraint until age two, or until they reach the maximum height and weight limits of their child restraint.

Warning
A young child’s hip bones are still so small that the vehicle seat belt may not remain low on the hip bones, as it should. Instead, it may settle up around the child’s abdomen. In a crash, the belt would apply force on a body area that is unprotected by any bony structure. This alone could cause serious or fatal injuries.
To reduce the risk of serious or fatal injuries during a crash, young children should always be secured in an appropriate child restraint.

Child Restraint SystemsChild Restraints6

Rear-Facing Infant Restraint

A rear-facing child restraint provides restraint with the seating surface against the back of the infant. The harness system holds the infant in place and, in a crash, acts to keep the infant positioned in the restraint.Child Restraints7

Forward-Facing Child Restraint

Forward-Facing Child Restraint A forward-facing child restraint provides restraint for the child’s body with the harness.Child Restraints8 Booster Seats
A belt-positioning booster seat is used for children who have outgrown their forward-facing child restraint. Boosters are designed to improve the fit of the vehicle’s seat belt system until the child is large enough for the vehicle seat belts to fit properly without a booster seat. See the seat belt fit test in Older Children 0 61.

Securing an Add-On Child Restraint in the Vehicle
Warning
A child can be seriously injured or killed in a crash if the child restraint is not properly secured in the vehicle. Secure the child restraint properly in the vehicle using the vehicle seat belt or LATCH system, following the instructions that came with that child restraint and the instructions in this manual.

To help reduce the chance of injury, the child restraint must be secured in the vehicle. Child restraints must be secured in vehicle seats by lap belts or the lap belt portion of a lap-shoulder belt, or by the LATCH system. See Lower Anchors and Tethers for Children (LATCH System) 0 71 for V more information. Never use a seat belt extender when installing a child restraint. Never use non-regulated aftermarket anchors or attachments to secure a child restraint.
Children can be endangered in a crash if the child restraint is not properly secured in the vehicle.

When securing an add-on child restraint, refer to the following:

  1. Instruction labels provided on the child restraint
  2. Instruction manual provided with the child restraint
  3. This vehicle owner’s manual

The child restraint instructions are important, so if they are not available, obtain a replacement copy from the manufacturer. Keep in mind that an unsecured child restraint can move around in a collision or sudden stop and injure people in the vehicle. Be sure to properly secure any child restraint in the vehicle — even when no child is in it.
In some areas Certified Child Passenger Safety Technicians (CPSTs) are available to inspect and demonstrate how to correctly use and install child restraints. In the U.S., refer to the National Highway Traffic Safety Administration (NHTSA) website to locate the nearest child safety seat inspection station. For CPST availability in Canada, check with Transport Canada or the Provincial Ministry of Transportation office.

Securing the Child Within the Child Restraint

Warning
A child can be seriously injured or killed in a crash if the child is not properly secured in the child restraint. Secure the child properly following the instructions that came with that child restraint.

Where to Put the Restraint

According to accident statistics, children and infants are safer when properly restrained in an appropriate child restraint secured in a rear seating position.
Whenever possible, children aged 12 and under should be secured in a rear seating position. The vehicle is equipped with a front center airbag in the inboard side of the driver seat. Even with a front-center airbag, a child restraint can be installed in any second row seating position.
Never put a rear-facing child restraint in the front. This is because the risk to the rear-facing child is so great if the airbag deploys.

 Warning
A child in a rear-facing child restraint can be seriously injured or killed if the front passenger airbag inflates. This is because the back of the rear-facing child restraint would be very close to the inflating airbag. A child in a forward-facing child restraint can be seriously injured or killed if the front passenger airbag inflates and the passenger seat is in a forward position.

Even if the passenger sensing system has turned off the front passenger frontal airbag, no system is fail-safe. No one can guarantee that an airbag will not deploy under some unusual circumstance, even though it is turned off. Secure rear-facing child restraints in the rear seat, even if the airbag is off. If you secure a forward-facing child restraint in the front seat, always move the front passenger seat as far back as it will go. It is better to secure the child restraint in a rear seat.
See Passenger Sensing System 0 56 for additional information.
If a child restraint is installed in a second row center seat, move the second row seat to the rearward position, whenever possible, to minimize contact with the front center airbag.

When securing a child restraint with the seat belts in a rear seat position, study the instructions that came with the child restraint to make sure it is compatible with this vehicle. Child restraints and booster seats vary considerably in size, and some may fit in certain seating positions better than others. Do not install a child restraint in any rear seating position where it cannot be installed securely. Depending on where you place the child restraint and the size of the child restraint, you may not be able to access adjacent seat belts or LATCH anchors for additional passengers or child restraints. Adjacent seating positions should not be used if the child restraint prevents access to or interferes with the routing of the seat belt.

The seat in front of an installed child restraint should be adjusted to ensure proper installation according to the child restraint manual.
When installing a child restraint in an adjustable second row seating position, the seat should be adjusted fore or aft to ensure proper installation according to the child restraint manual. If the seat is able to recline, the seat back should be positioned to its full upright position before installing a child restraint.
Wherever a child restraint is installed, be sure to follow the instructions that came with the child restraint and secure the child restraint properly.
Keep in mind that an unsecured child restraint can move around in a collision or sudden stop and injure people in the vehicle. Be sure to properly secure any child restraint in the vehicle — even when no child is in it.

Lower Anchors and Tethers for Children (LATCH System)

The LATCH system secures a child restraint during driving or in a crash. LATCH attachments on the child restraint are used to attach the child restraint to the anchors in the vehicle. This system is designed to make the installation of a child restraint easier.
In order to use the LATCH system in your vehicle, you need a child restraint that has LATCH attachments. LATCH-compatible rear-facing and forward-facing child seats can be properly installed using either the LATCH anchors or the vehicle’s seat belts. Do not use both the seat belts and the LATCH anchorage system to secure a rear-facing or forward-facing child restraint.

Booster seats use the vehicle’s seat belts to secure the child and the booster seat. If the manufacturer recommends that the booster seat be secured with the LATCH system, this can be done as long as the booster seat can be positioned properly and there is no interference with the proper positioning of the lap-shoulder belt on the child. Make sure to follow the instructions that came with the child restraint, and also the instructions in this manual.
When installing a child restraint with a top tether, you must also use either the lower anchors or the seat belts to properly secure the child restraint. A child restraint must never be installed using only the top tether.

For a forward-facing 5-pt harness child restraint where the combined weight of the child and restraint are up to 29.5 kg (65 lb), use either the lower LATCH anchorages with the top tether anchorage or the seat belt with the top tether anchorage. Where the combined weight of the child and restraint are greater than 29.5 kg (65 lb), use the seat belt with the top tether anchorage only.

Restraint Type Combined Weight of the Child + Child Restraint Use Only Approved Attachment Methods Shown with an X
LATCH – Lower Anchors Only Seat Belt Only LATCH – Lower Anchors and Top Tether Anchor Seat Belt and Top Tether Anchor
Rear-Facing Child Restraint Up to 29.5 kg (65 lb) X X
Rear-Facing Child Restraint Greater than

29.5 kg (65 lb)

X
Forward-Facing Child Restraint Up to 29.5 kg (65 lb) X X
Forward-Facing Child Restraint Greater than

29.5 kg (65 lb)

X

See Securing Child Restraints (With the Seat Belt in the Rear Seat) 0 78 or Securing Child Restraints (With the Seat Belt in the Front Seat) 0 80.
Child restraints built after March 2014 are labeled with the maximum child weight, with which the LATCH system can be used for installing the child restraint.
The following explains how to attach a child restraint with these attachments in the vehicle.
Not all vehicle seating positions have lower anchors. In this case, the seat belt must be used (with top tether where available) to secure the child restraint. See Securing Child Restraints (With the Seat Belt in the Rear Seat) 0 74 or Securing Child Restraints (With the Seat Belt in the Front Seat) 0 76.

Lower AnchorsChild Restraints9

Lower anchors (1) are metal bars built into the vehicle. There are two lower anchors for each LATCH seating position that will accommodate a child restraint with lower attachments (2).

Top Tether AnchorChild Restraints10

A top tether (3, 4) is used to secure the top of the child restraint to the vehicle. A top tether anchor is built into the vehicle. The top tether attachment hook (2) on the child restraint connects to the top tether anchor in the vehicle in order to reduce the forward movement and rotation of the child restraint during driving or in the event of a crash.

The child restraint may have a single tether (3) or a dual tether (4). Either will have a single attachment hook (2) to secure the top tether to the anchor.
Some child restraints with a top tether are designed for use with or without the top tether being attached. Others require the top tether always to be attached. In Canada, the law requires that forward-facing child restraints have a top tether and that the tether be attached. Be sure to read and follow the instructions for your child’s restraint.

Lower Anchor and Top Tether Anchor LocationsChild Restraints11

Second Row — Bucket

  • Seating positions with top tether anchors.
  • Seating positions with two lower anchors.

Child Restraints12

Second Row — 60/40 Bench

  • Seating positions with top tether anchors.
  • Seating positions with two lower anchors.

Third RowChild Restraints12

  • Seating positions with top tether anchors.

Child Restraints15To assist in locating the lower anchors, each second row anchor position has a label, near the crease between the seatback and the seat cushion.Child Restraints16

To assist in locating the top tether anchors, the top tether anchor symbol is near the anchorChild Restraints17

Second Row — Bucket Shown, Bench Similar

The top tether anchors are at the bottom rear of the seatback for each seating position in the second row.
Be sure to use an anchor located directly behind the seating position where the child restraint will be placed.Child Restraints18

Third Row

The top tether anchors are on the rear of the seatback for each seating position in the third row. Be sure to use an anchor located directly behind the seating position where the child restraint will be placed. For models with a cargo cover, the top tether anchors are on the back of the rear seatbacks. Remove the cargo cover before installing the top tether. The cargo cover should remain off while the top tether is in use. Be sure to use an anchor directly behind the seating position where the child restraint will be placed.

Do not secure a child restraint in a position without a top tether anchor if a national or local law requires that the top tether be attached, or if the instructions that come with the child restraint say that the top tether must be attached. According to accident statistics, children and infants are safer when properly restrained in a child restraint system or infant restraint system secured in a rear seating position. See Where to Put the Restraint 0 69 for additional information.

Securing a Child Restraint Designed for the LATCH System

Warning
A child could be seriously injured or killed in a crash if the child restraint is not properly attached to the vehicle using either the LATCH anchors or the vehicle seat belt. Follow the instructions that came with the child restraint and the instructions in this manual.

Warning
To reduce the risk of serious or fatal injuries during a crash, do not attach more than one child restraint to a single anchor. Attaching more than one child restraint to a single anchor could cause the anchor or attachment to come loose or even break during a crash. A child or others could be injured.

Warning
Children can be seriously injured or strangled if a shoulder belt is wrapped around their neck. The shoulder belt can tighten but cannot be loosened if it is locked. The shoulder belt locks when it is pulled all the way out of the retractor. It unlocks when the shoulder belt is allowed to go all the way back into the retractor, but it cannot do this if it is wrapped around a child’s neck. If the shoulder belt is locked and tightened around a child’s neck, the only way to loosen the belt is to cut it.

Buckle any unused seat belts behind the child restraint so children cannot reach them. Pull the shoulder belt all the way out of the retractor to set the lock, and tighten the belt behind the child restraint after the child restraint has been installed.

Caution
Do not let the LATCH attachments rub against the vehicle’s seat belts. This may damage these parts. If necessary, move buckled seat belts to avoid rubbing the LATCH attachments.

Do not fold the rear seatback when the seat is occupied. Do not fold the empty rear seat with a seat belt buckled. This could damage the seat belt or the seat. Unbuckle and return the seat belt to its stowed position, before folding the seat. The vehicle is equipped with a front center airbag in the inboard side of the driver seat. Even with a front-center airbag, a child restraint can be installed in any second row seating position. If a child restraint is installed in a second row center seat, move the second row seat to the rearward position, whenever possible, to minimize contact with the front center airbag.
If you need to secure more than one child restraint in the rear seat, see Where to Put the Restraint 0 69.

  1. Attach and tighten the lower attachments to the lower anchors. If the child restraint does not have lower attachments or the desired seating position does not have lower anchors, secure the child restraint with the top tether and the seat belt. Refer to the child restraint manufacturer instructions and the instructions in this manual.
    1. Find the lower anchors for the desired seating position.
    2. To access the lower anchors in the second row, it may help to recline the seatback.
      Third row seatbacks must be upright before placing the child restraint on the seat.
    3. Put the child restraint on the seat. 1.4. Attach and tighten the lower attachments on the child restraint to the lower anchors.
      If necessary, adjust the angle of the second row seatback to achieve a tight installation. Make sure the second row bench seatbacks are aligned at the same angle.
  2. If the child restraint manufacturer recommends that the top tether be attached, adjust the top tether to its full length and attach it to the anchor. Refer to the child restraint instructions and the following steps:
    1. Find the top tether anchor.
    2. Route, attach, and tighten the top tether according to your child restraint instructions and the following instructions:

Child Restraints19

If the position you are using does not have a headrest or head restraint and you are using a single tether, route the tether over the seatback.Child Restraints20

If the position you are using does not have a headrest or head restraint and you are using a dual tether, route the tether over the seatback.Child Restraints21

If the position you are using has an adjustable headrest or head restraint, adjust it accordingly to allow proper fitment. If you are using a dual tether, route the tether around the headrest or head restraint posts. If the child restraint is installed next to a center seat, make sure the top tether does not interfere with the center seating position shoulder belt/retractor. If it does, find another suitable seating position to install the child restraint.Child Restraints22

If the position you are using has an adjustable headrest or head restraint, adjust it accordingly to allow proper fitment. If you are using a single tether, route the tether in between the headrest or head restraint posts.Child Restraints23

If the position you are using has a fixed headrest or head restraint and you are using a dual tether, route the tether around the headrest or head restraint.
If the child restraint is installed next to a center seat, make sure the top tether does not interfere with the center seating position shoulder belt/retractor. If it does, find another suitable seating position to install the child restraint.Child Restraints24

If the position you are using has a fixed headrest or head restraint and you are using a single tether, route the tether around the inboard or outboard side of the headrest or head restraint.

  • Before placing a child in the child restraint, make sure it is securely held in place. To check, grasp the child restraint at the LATCH path and attempt to move it side to side and back and forth. There should be no more than 2.5 cm (1 in) of movement, for proper installation.

Replacing LATCH System Parts After a Crash

Warning
A crash can damage the LATCH system in the vehicle. A damaged LATCH system may not properly secure the child restraint, resulting in serious injury or even death in a crash. To help make sure the LATCH system is working properly after a crash, see your dealer to have the system inspected and any necessary replacements made as soon as possible.

If the vehicle has the LATCH system and it was being used during a crash, new LATCH system parts may be needed. New parts and repairs may be necessary even if the LATCH system was not being used at the time of the crash.

Securing Child Restraints (With the Seat Belt in the Rear Seat)

The vehicle is equipped with a front center airbag in the inboard side of the driver seat.
Even with a front center airbag, a child restraint can be installed in any second row seating position. If you install a child restraint in a second row center seat, move the second row seat to the rearward position, whenever possible, to minimize contact with the front center airbag.
When securing a child restraint with the seat belts in a rear seat position, study the instructions that came with the child restraint to make sure it is compatible with this vehicle. If the child restraint has the LATCH system, see Lower Anchors and Tethers for Children (LATCH System) 0 64for how and where to install the child restraint using LATCH. If a child restraint is secured in the vehicle using a seat belt and it uses a top tether, see

Lower Anchors and Tethers for Children

(LATCH System) 0 71 for top tether anchor locations.
Do not secure a child seat in a position without a top tether anchor if a national or local law requires that the top tether be anchored, or if the instructions that come with the child restraint say that the top tether must be anchored. In Canada, the law requires that forward-facing child restraints have a top tether, and that the tether be attached.
If the child restraint or vehicle seat position does not have the LATCH system, you will be using the seat belt to secure the child restraint. Be sure to follow the instructions that came with the child restraint.
If more than one child restraint needs to be installed in the rear seat, be sure to read Where to Put the Restraint 0 66.

  1. Put the child restraint on the seat.
  2. Pick up the latch plate and run the lap and shoulder portions of the vehicle seat belt through, or around, the child restraint. Ensure the seat belt webbing is routed as directly as possible and is not caught on seat handles or plastic trim.
    The child restraint instructions will show you how.
    Child Restraints25
  3. Push the latch plate into the buckle until it clicks. Position the release button on the buckle, away from the child restraint, so that the seat belt could be quickly unbuckled if necessary.
    There must not be direct contact of the child restraint to the push button.
    Child Restraints26
  4. Pull the shoulder belt all the way out of the retractor to set the lock. When the retractor lock is set, the belt can be tightened but not pulled out of the retractor.
    Child Restraints31
  5. To tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt, and feed the shoulder belt back into the retractor. When installing a forward-facing child restraint, it may be helpful to use your knee to push down on the child restraint as you tighten the belt. Try to pull the belt out of the retractor to make sure the retractor is locked. If the retractor is not locked, repeat Steps 4 and 5.
  6. If the child restraint has a top tether, follow the child restraint manufacturer’s instructions regarding the use of the top tether. See Lower Anchors and Tethers for Children (LATCH System) 67.
  7. Before placing a child in the child restraint, make sure it is securely held in place. To check, grasp the child’s restraint at the seat belt path and attempt to move it side to side and back and forth. When the child restraint is properly installed, there should be no more than 2.5 cm (1 in) of movement.

To remove the child restraint, unbuckle the vehicle seat belt and let it return to the stowed position. If the top tether is attached to a top tether anchor, disconnect it.

Securing Child Restraints (With the Seat Belt in the Front Seat)

This vehicle has airbags. A rear seat is a safer place to secure a forward-facing child restraint. See Where to Put the Restraint 66. In addition, the vehicle has a passenger sensing system that is designed to turn off the front outboard passenger frontal airbag.
under certain conditions. See Passenger Sensing System 0 56 and Passenger Airbag Status Indicator 0 105 for more information, including important safety information. Never put a rear-facing child seat in the front. This is because the risk to the rear-facing child is so great if the airbag deploys.

Warning
A child in a rear-facing child restraint can be seriously injured or killed if the front outboard passenger frontal airbag inflates. This is because the back of the rear-facing child restraint would be very close to the inflating airbag. A child in a forward-facing child restraint can be seriously injured or killed if the front outboard passenger frontal airbag inflates and the passenger seat is in a forward position. Even if the passenger sensing system has turned off the front outboard passenger frontal airbag, no system is fail-safe. No one can guarantee that an airbag will not deploy under some unusual circumstance, even though it is turned off.
Secure rear-facing child restraints in the rear seat, even if the airbag is off. If you secure a forward-facing child restraint in the front outboard passenger seat, always move the seat as far back as it will go. It is better to secure the child restraint in a rear seat.
See Passenger Sensing System 0 56 for additional information.

If the child restraint uses a top tether, see Lower Anchors and Tethers for Children (LATCH System) 0 67 for top tether anchor locations.
Do not secure a child seat in a position without a top tether anchor if a national or local law requires that the top tether be anchored, or if the instructions that come with the child restraint say that the top tether must be anchored. In Canada, the law requires that forward-facing child restraints have a top tether and that the tether be attached. When using the lap-shoulder belt to secure the child restraint in this position, follow the instructions that came with the child restraint and the following instructions:

  1. Move the seat as far back as it will go before securing the forward-facing child restraint. Move the seat upward or the seatback to an upright position, if needed, to get a tight installation of the child restraint.
    There must be finger clearance between the push button and the child restraint. When the passenger sensing system has turned off the front outboard passenger frontal airbag, the OFF indicator on the passenger airbag status indicator should light and stay lit when you start the vehicle. See Passenger Airbag Status Indicator 0 99.
  2. Put the child restraint on the seat.
  3. Pick up the latch plate and run the lap and shoulder portions of the vehicle seat belt through or around the restraint. Ensure the seat belt webbing is routed as direct as possible and is not caught on seat handles or plastic trim. The child restraint instructions will show you how.
    Child Restraints25
  4. Push the latch plate into the buckle until it clicks.
    Position the release button on the buckle, away from the child restraint, so that the seat belt could be quickly unbuckled if necessary.
    Child Restraints30
  5. Pull the shoulder belt all the way out of the retractor to set the lock. When the retractor lock is set, the belt can be tightened but not pulled out of the retractor.
    It may be necessary to slide the adjustable stop along the webbing toward the outboard anchor to fully tighten the seat belt around the child restraint. While a child restraint is installed, the adjustable stop should be positioned on the portion of the webbing that does not interact with the child restraint.
    Child Restraints31
  6. To tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt, and feed the shoulder belt back into the retractor.
    There must be finger clearance between the push button and the child restraint. If there is no clearance between the buckle push button and the child restraint, move the seat upward and repeat the prior installation steps. Otherwise secure the child restraint in the rear seat. When installing a forward-facing child restraint, it may be helpful to use your knee to push down on the child restraint as you tighten the belt. Try to pull the belt out of the retractor to make sure the retractor is locked. If the retractor is not locked, repeat Steps 5 and 6. There must be finger clearance between the push button and the child restraint.
    If there is no clearance between the buckle push button and the child restraint, move the seat upward and repeat the prior installation steps. Otherwise secure the child restraint in the rear seat. When installing a forward-facing child restraint, it may be helpful to use your knee to push down on the child restraint as you tighten the belt Try to pull the belt out of the retractor to make sure the retractor is locked.
    If the retractor is not locked, repeat Steps 5 and 6.
  7. Before placing a child in the child restraint, make sure it is securely held in place. To check, grasp the child’s restraint at the seat belt path and attempt to move it side to side and back and forth.

When the child restraint is properly installed, there should be no more than 2.5 cm (1 in) of movement. If the airbags are off, the OFF indicator in the passenger airbag status indicator will come on and stay on when the vehicle is started. If a child restraint has been installed and the ON indicator is lit, see “If the On Indicator Is Lit for a Child Restraint” under Passenger Sensing System 0 56. To remove the child restraint, unbuckle the vehicle seat belt and let it return to the stowed position.

Storage

Storage Compartments

Warning
Do not store heavy or sharp objects in storage compartments. In a crash, these objects may cause the cover to open and could result in injury.

Glove BoxCadillac CT5 2023 Storage User Guide1

Pull the handle from the side to open the glove box. Close until it latches. Use the mechanical key in the remote key to lock or unlock. See Keys 0 6

Cupholders

Cupholders in the center console have a retractable cover. Do not place items on the cover.Cadillac CT5 2023 Storage User Guide2

Press the button to open the cover

Rear Seat Cupholders
Cadillac CT5 2023 Storage User Guide3

If equipped, pull down the rear seat armrest to use the cupholders.

Center Console Storage

If equipped, the SD card is used for navigation. Do not remove the card from the holder.Cadillac CT5 2023 Storage User Guide4

Automatic Transmission Shown, Manual Transmission Similar

Press the button and lift to access the storage area. There is an accessory power outlet, two USB ports, and an SD card slot inside. See Power Outlets 0 86 or USB Port 0 138. If equipped, there is a removable phone holder to store a phone and the cord while charging.

Umbrella StorageCadillac CT5 2023 Storage User Guide5

Slide a compact umbrella no larger than 6 cm (2.36 in) in diameter into the opening on the driver or passenger door.

Additional Storage Features

Cargo Tie-DownsCadillac CT5 2023 Storage User Guide6

The cargo tie-downs can be used to secure small loads inside the trunk.

Q&A

  1. What is the LATCH system in the Cadillac CT5 2023?
    The LATCH system stands for Lower Anchors and Tethers for Children. It allows for easy installation of child seats in the back seat of the Cadillac CT5 2023.
  2. How many child seats can the Cadillac CT5 2023 accommodate?
    The Cadillac CT5 2023 can accommodate up to two child seats in the back seat.
  3. Does the Cadillac CT5 2023 have airbags for children?
    The CT5 features a variety of airbags, including front and side airbags, that provide protection to all passengers in the event of a collision.
  4. Is the Cadillac CT5 2023 recommended for families with children?
    Yes, the Cadillac CT5 2023 is a safe and practical choice for families with children who prioritize comfort and convenience.
  5. What is the storage capacity of the trunk in the Cadillac CT5 2023?
    The Cadillac CT5 2023 has a spacious trunk with 11.9 cubic feet of storage space.
  6. What storage compartments are available in the Cadillac CT5 2023?
    The CT5 has several storage compartments, including a center console with a sliding armrest and cup holders, a glove compartment, and door pockets.
  7. Are there any optional storage solutions available in the Cadillac CT5 2023?
    Yes, the CT5 offers several optional storage solutions, including a rear-seatback storage system, a trunk organizer, and a cargo net.
  8. Can the rear seats in the Cadillac CT5 2023 be folded down for extra storage space?
    No, the rear seats in the CT5 cannot be folded down for additional storage space.
  9. Can the trunk in the Cadillac CT5 2023 be opened remotely?
    Yes, the CT5 features a power trunk lid that can be opened remotely using the key fob or a button inside the vehicle.
  10. Are there any safety features in the Cadillac CT5 2023 that are specifically designed for children?
    Yes, the CT5 features a comprehensive system of child restraints to ensure the safety of children while on the road.
  11. Are there any limitations to using child seats in the Cadillac CT5 2023?
    The use of child seats in the CT5 is subject to the manufacturer’s guidelines and applicable laws and regulations.
  12. Can child seats be installed in the front seat of the Cadillac CT5 2023?
    It is not recommended to install child seats in the front seat of any vehicle, including the Cadillac CT5 2023.
  13. Can the cup holders in the Cadillac CT5 2023 hold child cups?
    Yes, the cup holders in the CT5 are designed to hold various types of cups, including child cups.
  14. Is there a weight limit for the items that can be stored in the trunk of the Cadillac CT5 2023?
    The weight limit for the items that can be stored in the trunk of the CT5 is subject to the manufacturer’s guidelines and applicable laws and regulations.
  15. Can accessories such as strollers and car seats be stored in the trunk of the Cadillac CT5 2023?
    Yes, the spacious trunk of the CT5 can easily accommodate accessories such as strollers and car seats.

Useful Links

View Full User Guide: Cadillac CT5 2023 User Guide

Download Manuals: https://www.cadillac.com/support/vehicle/manuals-guides

Leave a Reply

Your email address will not be published. Required fields are marked *