Auto User Guide

Cadillac XT5 2022 User Guide

Cadillac XT5 2022-Featured

LOGO

Cadillac XT5 2022 User Guide

The Cadillac XT5 2022 is a luxury SUV that looks great and can be used in many ways. It pushes the limits of comfort and speed. The XT5 is elegant and draws attention on the road because of how it looks. This SUV is easy to drive because it has a responsive engine. It combines speed and efficiency in a seamless way. The XT5’s cabin is roomy and well-made, giving both the driver and passengers a high level of comfort and fine amenities. The XT5 has high-tech safety features and the latest technology to keep you safe and connected on the road. The Cadillac XT5 2022 has the perfect mix of style, flexibility, and sophistication, making it a top choice for people who want a luxurious and exciting driving experience whether they are driving in the city or on a road trip.

Instrument Panel Overview

  1. Air Vents 0 208.
  2. Exterior Lamp Controls 0 134. Turn Signal Lever. See Turn and Lane-Change Signals 0 137. IntelliBeam System Button (If Equipped). See Exterior Lamp Controls 0 134.
  3. Tap Shift Controls. See Manual Mode 0 237 (If Equipped).
  4. Instrument Cluster 0 104. Driver Information Center (DIC) Display. See Driver Information Center (DIC) 0 119.
  5. Windshield Wiper/Washer 0 97. Rear Window Wiper/Washer 0 99.
  6. ENGINE START/STOP Button. See Ignition Positions 0 225.
  7. Park Assist Button. See Park Assist 0 260. Automatic Parking Assist (APA) Button. See Park Assist 0 260. Auto Stop Disable Switch. See Stop/Start System 0 227.
  8. Light Sensor. See Automatic Headlamp System 0 136.
  9. Hazard Warning Flashers 0 137.
  10. Infotainment Controls. See Overview 0 142.
  11. Heated and Ventilated Front Seats 0 46 (If Equipped).
  12. MODE Switch. See Driver Mode Control 0 243. Traction Control/Electronic Stability Control 0 241.
    All-Wheel Drive 0 238 (If Equipped).
  13. Dual Automatic Climate Control System 0 201.
  14. Wireless Charging 0 101 (If Equipped).
  15. Infotainment Controls. See Overview 0 142.
  16. Shift Lever. See Automatic Transmission 0 233.
  17. Steering Wheel Controls 0 96. Driver Information Center (DIC) Controls. See Driver Information Center (DIC) 0 119.
  18. Steering Wheel Controls 0 96.
  19. Horn 0 97.
  20. Forward Collision Alert (FCA) System 0 267 (If Equipped). Lane Keep Assist (LKA) 0 277 (If Equipped).
    Heated Steering Wheel 0 96 (If Equipped).
  21. Cruise Control 0 244. Adaptive Cruise Control (Advanced) 0 246 (If Equipped). Phone Button. See Steering Wheel Controls 0 96.
  22. Steering Wheel Adjustment 0 96 (Out of View).
  23. Head-Up Display (HUD) 0 121 (If Equipped).
  24. Hood Release. See Hood 0 298. Data Link Connector (DLC) (Out of View). See Malfunction Indicator Lamp (Check Engine Light) 0 110.
  25. Instrument Panel Illumination Control 0 138.
  26. Electric Parking Brake 0 239.

Keys and Locks

WARNING:
Leaving children in a vehicle with a Remote Keyless Entry (RKE) transmitter is dangerous and children or others could be seriously injured or killed. They could operate the power windows or other controls or make the vehicle move. The windows will function with the RKE transmitter in the vehicle, and children or others could be caught in the path of a closing window. Do not leave children in a vehicle with an RKE transmitter.

Passive Locking

This vehicle will lock several seconds after all doors are closed if the vehicle is off and at least one RKE transmitter has been removed or none remain in the interior.
If equipped, the fuel door will lock. If other electronic devices interfere with the RKE transmitter signal, the vehicle may not detect the RKE transmitter inside the vehicle.
If passive locking is enabled, the doors may lock with the RKE transmitter inside the vehicle. Do not leave the RKE transmitter in an unattended vehicle.
To customize the doors to automatically lock when exiting the vehicle, see Vehicle Personalization 0 126.

Temporary Disable of Passive Locking
Temporarily disable passive locking by pressing and holding K on the interior door switch with a door open for at least four seconds, or until three chimes are heard. Passive locking will then remain disabled until Q on the interior door is pressed, or until the vehicle is turned on.

Remote Left in Vehicle Alert
When the vehicle is turned off and an RKE transmitter is left in the vehicle, the horn will chirp three times after all doors are closed. To turn on or off, see Vehicle Personalization 0 126.

Remote No Longer in Vehicle Alert
If the vehicle is on with a door open, and then all doors are closed, the vehicle will check for RKE transmitters inside. If an RKE transmitter is not detected, the Driver Information Center (DIC) will display NO REMOTE DETECTED and the horn will chirp three times. This occurs only once each time the vehicle is driven. To turn on or off, see Vehicle Personalization 0 126.

Programming with Recognized Transmitters

  1. Place the two recognized transmitters in the cupholder.
  2. Remove the key lock cylinder cap on the driver door handle. See Door Locks 0 16. Insert the vehicle key of the transmitter into the key lock cylinder on the driver door and turn the key counterclockwise, to the unlock position, five times within 10 seconds. The DIC displays READY FOR REMOTE #2, 3, 4, ETC.
  3. Place the new transmitter into the transmitter pocket. The transmitter pocket is inside the center console storage area between the driver and front passenger seats. The storage area will need to be opened and the storage tray lifted up to access the transmitter pocket.
  4. Press ENGINE START/STOP. When the transmitter is learned the DIC display will show that it is ready to program the next transmitter.
  5. Remove the transmitter from the transmitter pocket and press the transmitter K or Q button. To program additional transmitters, repeat Steps 3–5. When all additional transmitters are programmed, press and hold ENGINE START/STOP for 12 seconds to exit programming mode.
  6. Return the key back into the transmitter.
  7. Replace the key lock cylinder cap. See Door Locks 0 16.

Programming without Recognized Transmitters

  1. Remove the key lock cylinder cap on the driver door handle. See Door Locks 0 16. Insert the vehicle key of the transmitter into the key lock cylinder on the driver door handle and turn the key counterclockwise, to the unlock position, five times within 10 seconds.
    The DIC displays REMOTE LEARN PENDING, PLEASE WAIT.
  2. Wait for 10 minutes until the DIC displays PRESS ENGINE START BUTTON TO LEARN and then press ENGINE START/STOP.
    The DIC display will again show REMOTE LEARN PENDING, PLEASE WAIT.
  3. Repeat Step 2 two additional times. After the third time, all previously known transmitters will no longer work with the vehicle. The remaining transmitters can be relearned during the next steps. The DIC display should now show READY FOR REMOTE # 1.
  4. Place the new transmitter into the transmitter pocket. The transmitter pocket is inside the center console storage area between the driver and front passenger seats. The storage area will need to be opened and the storage tray lifted up to access the transmitter pocket.
  5. Press ENGINE START/STOP. When the transmitter is learned the DIC display will show that it is ready to program the next transmitter.
  6. Remove the transmitter from the transmitter pocket and press the transmitter K or Q button. To program additional transmitters, repeat Steps 4–6. When all additional transmitters are programmed, press and hold ENGINE START/STOP for 12 seconds to exit programming mode.
  7. Return the key back into the transmitter.
  8. Replace the key lock cylinder cap. See Door Locks 0 16.

Battery Replacement

WARNING:
Never allow children to play with the RKE transmitter. The transmitter contains a small battery, which can be a choking hazard. If swallowed, internal burns can occur, resulting in severe injury or death. Seek medical attention immediately if a battery is swallowed. To avoid personal injury, do not touch metal surfaces on the RKE transmitter when it has been exposed to extreme heat. These surfaces can be hot to the touch at temperatures above 59 °C (138 °F).

CAUTION:
When replacing the battery, do not touch any of the circuitry on the transmitter. Static from your body could damage the transmitter. Always replace the battery with the correct type. Replacing the battery with an incorrect type could potentially create a risk of battery explosion. Dispose of used batteries according to instructions and local laws. Do not attempt to burn, crush, or cut the used battery, and avoid exposing the battery to environments with extremely low air pressures or high temperatures.
If the RKE transmitter is not reassembled properly, liquids could enter the housing and damage the circuitry, resulting in an RKE transmitter malfunction and/or failure. To prevent damage, always follow the steps for RKE transmitter reassembly in this manual to ensure the transmitter is sealed properly whenever the RKE transmitter is opened.

Reference Links

Download Manuals: https://www.cadillac.com/support/vehicle/manuals-guides

Scroll to Top