Cadillac XT6 2020

The 2020 Cadillac XT6 is a luxury crossover SUV that is stylish, flexible, and comfortable. The XT6 stands out on the road because of its striking design and refined details. It is the right blend of elegance and modernity. The cabin is big and well-designed, with three rows of seats and plenty of room for both people and things. The XT6 is made of high-quality materials and has high-tech features that make driving it a luxurious and linked experience. The XT6 gives a confident and exciting ride thanks to its smooth and powerful performance, which comes from its strong engine choices and responsive handling. The XT6 also puts safety first with its full set of driver-assistance features, which give you more peace of mind and make your life easier. Overall, the 2020 Cadillac XT6 is the best of both luxury and practicality in a crossover SUV. It has a great mix of style, comfort, and flexibility that makes it a great choice for both discerning drivers and families.

Memory Seats

If equipped, memory seats allow two drivers to save and recall their unique seat positions for driving the vehicle, and a shared exit position for getting out of the vehicle. Other feature positions may also be saved, such as power mirrors and power steering wheel, if equipped. Memory positions are linked to RKE transmitters 1 or 2 for automatic memory recalls. Before saving, adjust all available memory feature positions. Turn the vehicle on and then press and release SET; a beep will sound. Then immediately press and hold 1, 2, orB(Exit) until two beeps sound. To manually recall these positions, Press and hold 1, 2, or until the saved position is reached. Follow the instructions under “Saving Memory Positions.” The vehicle identifies the current driver’s RKE transmitter number (1– 8). See Remote Keyless Entry (RKE) System Operation 0 8. Only RKE transmitters 1 and 2 can be used for automatic memory recalls. A Driver Information Center (DIC) welcomes a message indicating the transmitter the number may display for the first few ignition cycles following a transmitter change. For Seat Entry Memory to work properly, save the positions to the memory button (1 or 2) matching the RKE transmitter number displayed in the DIC welcome message. Carry the linked RKE transmitter when entering the vehicle.

Vehicle Personalization Settings

• To have the Seat Entry Memory the movement begins when the vehicle is started, select the Settings menu, then Vehicle, then Seating Position, and then Seat Entry Memory. Select On or Off. See “Seat Entry Memory” later in this section.
• To begin Seat Exit Memory movement when the vehicle is turned off and the driver’s door is opened, or when the vehicle is turned off with the driver’s door already opened, select the Settings menu, then Vehicle, then Seating Position, and then Seat Exit Memory. Select On or Off. See “Seat Exit Memory” later in this section.
• See Vehicle Personalization 0 135 for additional setting information.

Identifying Driver Number
To identify the driver number:

1. Move your RKE transmitter away from the vehicle.
2. Start the vehicle with another key or RKE transmitter. The DIC should display the driver number for the other RKE transmitter. Turn the vehicle off and remove the key or RKE transmitter from the vehicle.
3. Start the vehicle with the initial key or RKE transmitter. The DIC should display the driver number of your RKE transmitter.

Saving Memory Positions
Read these instructions completely before saving memory positions.
To save preferred driving positions 1 and 2:

1. Turn the vehicle on or to ACC/ ACCESSORY. A DIC welcome message may indicate driver number 1 or 2.
2. Adjust all available memory features to the desired driving position.
3. Press and release SET; a beep will sound.
4. Immediately press and hold the 1 or 2 memory buttons matching the above DIC welcome message until two beeps sound. If too much time passes between releasing SET and pressing 1, the memory position will not be saved and two beeps will not sound. Repeat Steps 3 and 4. 1 or 2 corresponds to the driver number. See “Identifying Driver Number” previously in this section.
5. Repeat Steps 1–4 for a second driver using 1 or 2. To save the position for and Seat Exit Memory features, repeat Steps 1– 4 using. This saves the position for getting out of the vehicle. Save the preferred memory feature positions to both 1 and 2 if you are the only driver.

Manually Recalling Memory Positions
Press and hold 1, 2, or to recall the previously saved memory positions if you are driver 1 or 2 identified in the DIC welcome message.
To stop Manual Memory recall movement, release 1, 2, or press any of the following controls:

• Power seat
• Memory SET
• Power mirror, with the driver or passenger side mirror, selected
• Power steering wheel, if equipped

Seat Entry Memory
The vehicle identifies the number of the current driver’s RKE transmitter (1–8). See Remote Keyless Entry (RKE) System Operation 0 8. If the RKE transmitter is 1 or 2, and Seat Entry Memory is enabled in the vehicle personalization, the positions saved to the same memory button number 1 or 2 are automatically recalled when the vehicle is turned on or turned from off to ACC/ACCESSORY. RKE transmitters 3–8 will not provide automatic memory recalls. To turn the Seat Entry Memory on or off, see “Vehicle Personalization Settings” previously in this section and Vehicle Personalization 0 135. The shift lever must be in P (Park) to start Seat Entry Memory. Seat Entry Memory recall will be complete if the vehicle is shifted out of P (Park) prior to reaching the saved memory position.
To stop Seat Entry Memory recall movement, turn the vehicle off or press any of the following controls:

• Power seat
• Memory SET, 1, 2, orB
• Power mirror, with the driver or passenger side mirror, selected
• Power steering wheel, if equipped

If the saved memory seat position does not automatically recall or recall to the wrong positions, the driver’s RKE transmitter number (1 or 2) may not match the memory button number that the positions were saved to. Try storing the position to the other memory button or try the other RKE transmitter.

Seat Exit Memory
Seat Exit Memory is not linked to an RKE transmitter. The position saved to Bis is used for all drivers. To turn Seat Exit Memory on or off, see “Vehicle Personalization Settings” previously in this section and Vehicle Personalization 0 135.

If turned on, the position is saved to is automatically recalled when one of the following occurs:

• The vehicle is turned off and the driver door is opened within a short time.
• The vehicle is turned off with the driver’s door open.

To stop Seat Exit Memory movement, press any of the following memory controls:

• Power seat
• Memory SET, 1, 2, orB
• Power mirror, with the driver or passenger side mirror,
• Obstructions
  If something has blocked the driver seat and/or power steering wheel while recalling a memory position, the recall may stop. Remove the obstruction and try the recall again. If the memory position still does not recall, see your dealer.

Heated and Ventilated Front Seats

Warning
If the temperature changes or pain to the skin cannot be felt, the seat of the heater may cause burns. To reduce the risk of burns, use care when using the seat heater, especially for long periods of time. Do not place anything on the seat that insulates against heat, such as a blanket, cushion, cover, or similar item. This may cause the seat heater to overheat. An overheated seat heater may cause a burn or may damage the seat.

Useful Link

Download Link: https://www.cadillac.com/support/vehicle/manuals-guides