2020 Vauxhall Combo Lighting Information
In higher specification levels, the Combo comes standard with stylish and efficient LED headlights up front. Not only do LED headlights provide a bright and clear view of the road ahead, but they also utilize less energy than conventional halogen lights, which contributes to enhanced fuel economy. For added safety, the Combo is typically equipped with daytime running lights (DRLs) that increase visibility and make the vehicle more visible to other drivers, particularly during the day. The 2020 Vauxhall Combo’s rear illumination is designed for both functionality and safety. When halting, turning, or reversing, high-mounted brake lights, clear indicators, and bright reverse lights ensure that drivers can clearly communicate their intentions to those behind them.
In conclusion, the lighting system of the 2020 Vauxhall Combo integrates modern LED technology with practical design to improve safety, visibility, and the aesthetic appeal of this versatile commercial van. These lighting features make it a dependable option for companies and commuters seeking a well-lit and secure driving environment.
Exterior Lighting
Light Switch
Turn light switch:
AUTO : automatic light control switches automatically between daytime running light and headlight
sidelights
headlights
When switching on the ignition, automatic light control is active.
Tail lights
Tail lights are illuminated together with low/high beam and sidelights.
Automatic Light Control
When the automatic light control function is switched on and the engine is running, the system switches between daytime running lights and headlights automatically depending on the external lighting conditions and information given by the wiper system.
Make sure the sensor is not blocked .
Daytime running light .
Automatic headlight activation
During poor lighting conditions the headlights are switched on.
Additionally, headlights are switched on if the windscreen wipers have been activated for several wipes.
Tunnel Detection
When a tunnel is entered, headlights are switched on immediately.
High Beam
Push lever to switch from low to high beam.
Pull lever to deactivate high beam.
High Beam Assist
This feature automatically activates the high beam at night when vehicle is faster than 15 mph.
It switches automatically back to low beam when:
- A sensor detects the lights of oncoming or preceding vehicles.
- Driving in urban areas.
- The vehicle is slower than 9 mph.
It is foggy or snowy.
Front or rear fog lights are switched on.
If there are no restrictions detected, the system switches back to high beam.
Activation
Indicator lever with f button
Activate high beam assist by pressing 
once.
The green control indicator f illuminates continuously when the assist is activated, the blue one 
illuminates when high beam is on.
Deactivation
With high beam on, pull the indicator lever once to deactivate high beam assist. If a headlight flash is activated when the high beam is off, the high beam assist will remain activated.
Pushing the indicator lever to activate manual high beam will deactivate high beam assist. It is also deactivated when fog lights are switched on.
Press once to deactivate high beam assist.
The latest setting of the high beam assist is being stored and remains set when the ignition is switched on again.
Headlight Flash
To activate the headlight flash, pull lever.
Pulling lever deactivates high beam.
Headlight Range Adjustment
Manual headlight range adjustment
To adapt headlight range to the vehicle load to prevent dazzling: turn thumb wheel ? to required position.
0 : front seats occupied
1 : all seats occupied
2 : all seats occupied and load
compartment laden
3 : driver’s seat occupied and load compartment laden
Headlights When Driving Abroad
When driving in countries where traffic drives on the opposite side of the road, the headlights do not have to be adjusted.
Daytime Running Lights
Daytime running lights increase visibility of the vehicle during daylight.
They are switched on automatically when the engine is running.
The system switches between daytime running lights and low beam automatically, depending on the lighting conditions.
Hazard Warning Flashers
Hazard warning flashers are switched on automatically in the following situations:
- Braking in an emergency (depending on the force of deceleration).
- In the event of an accident.
They are switched off the first time you accelerate or if you press ¨.
Turn Lights
up : right turn lights
down : left turn lights
A resistance point can be felt when moving the indicator lever.
Constant flashing is activated when the indicator lever is being moved beyond the resistance point. It is deactivated when the steering wheel is moved in the opposite direction or indicator lever is manually moved back to its neutral position.
Activate temporary flashing by holding the indicator lever just before the resistance point. Turn lights will flash until indicator lever is being released.
To activate three flashes, tap the indicator lever briefly without passing the resistance point.
If you forget to cancel the turn lights for more than twenty seconds, the volume of the audible signal will increase if the speed is
above 40 mph.
Front Fog Lights
Operated by pressing >.
Light switch in position AUTO: switching on front fog lights will switch headlights on automatically.
Rear fog light
Operated by pressing 
.
Light switch in position AUTO: switching on rear fog light will switch headlights on automatically.
Light switch in position rear fog light can only be switched on with front fog lights.
The vehicle rear fog light is deactivated when towing a trailer or a plug is connected with the socket, e.g. when a bicycle carrier is used.
Parking Lights
When the vehicle is parked, the parking lights on one side can be activated:
- Switch off ignition.
- Move indicator lever all the way up (right parking lights) or down (left parking lights).
Confirmed by a signal and the corresponding turn lights control indicator.
Reversing lights
The reversing light comes on when the ignition is on and reverse gear is selected.
Misted light covers
The inside of the light housing may mist up briefly in poor, wet and cold weather conditions, in heavy rain or after washing. The mist disappears quickly by itself; to help switch on the headlights.
Interior Lighting
Instrument panel illumination control
Brightness of the following lights can be adjusted when the exterior lights are on:
- Instrument panel illumination
Info Display
Illuminated switches and operation elements
Turn thumb wheel A and hold until the desired brightness is obtained.
Interior Lights
During entry and exit of the vehicle, the front and rear courtesy lights automatically switch on and then off after a delay.
Notice
In the event of an accident with airbag deployment the courtesy lights are turned on automatically.
Front and rear courtesy light
Operate rocker switch:
: automatic switching on and off
Press 
: on
Press 
: off
Reading lights
Operated by pressing z and B in the courtesy lights.
Illustration shows rear courtesy lights.
Sunvisor lights
Illuminates when the cover is opened.
FAQs
Higher trim levels of the 2020 Vauxhall Combo feature energy-efficient LED headlights.
LED headlights are typically available on 2020 Vauxhall Combo models with higher specification levels.
LED headlights provide brighter illumination while consuming less energy, thereby improving fuel economy.
Yes, the Combo frequently includes DRLs to improve daytime visibility.
DRLs make the vehicle more conspicuous to other road users, increasing overall safety.
Some trim levels may offer fog lights as an optional feature to enhance visibility in inclement weather.
Typically, the indicator lamps use energy-efficient and durable LED bulbs.
Yes, the 2020 Vauxhall Combo is furnished with a high-mounted brake light to enhance rearward visibility.
Yes, the Combo’s bright reverse lights provide excellent visibility when reversing.
While it is possible to upgrade the lighting system aftermarket, compatibility and safety should be verified by a professional.
Adaptive headlights that adjust their intensity and direction based on the traffic conditions are typically not available on the Combo.
The lifespan of light bulbs varies, but it is advisable to inspect and replace them if they become dim or malfunction.
Some trim levels may offer an automatic headlamp feature that activates and deactivates the headlights in response to ambient light conditions.
Depending on the trim level and options, cargo area lighting may be available to facilitate the loading and offloading of cargo.
Headlight warranties can vary, so it is advisable to consult with your dealer regarding the lighting system’s specific warranty terms.
Useful Link
View Full PDF: Vauxhall Combo 2020 User Manual| Auto User Guide
to switch on the display.
to select a menu page.
to exit a menu without changing a setting.
to select system settings (units, language, time and date).
to select vehicle settings or driving functions.
Turn signal
Malfunction indicator light
Antilock brake system (ABS)
Deflation detection system
Front fog lights
Unlock lever, adjust steering wheel, then engage lever and ensure it is fully locked. Do not adjust steering wheel unless vehicle is stationary and steering wheel lock has been released.
Cruise control and speed limiter are operated via the controls on the left side of the steering wheel. Additionally, adaptive cruise control can be set by using the controls on the left side of the steering wheel. Infotainment system can be operated via the controls on the right side of the steering wheel. Further information is available in the Infotainment manual.
Activate the heating by pressing Z. Activation is indicated by the control indicator in the button. Activation via the Info Display The heating can be activated or deactivated by touching Z in the climate menu ;. Activation is indicated by Z in the status bar.
Press
Pedestrian safety alert The sound of the pedestrian safety alert is generated to indicate the vehicle presence to pedestrians. It is active up to 19 mph.
HI: fast 
Wiper lever in position INT, it is possible to select five frequency levels by turning the ring.
HI: fast 
Turn the adjuster wheel to adjust the sensitivity. Make sure the sensor is not blocked. Control indicator < .
Pull lever. Washer fluid is sprayed onto the windscreen and the wiper wipes a few times.
Push lever
Illustration shows an example. If outside temperature drops to 3 °C, a warning message is displayed in the Driver Information Centre.
A 12 V power outlet is located behind the storage cover. Push cover upwards to open. Depending on the version, the 12 V power outlet may be freely accessible. 
At the right side of the load compartment, another 12 V power outlet may be located. Do not exceed the maximum power consumption of 120 W. 
A 230 V power outlet may be located on the lower side of the centre console in the front passenger compartment. Do not exceed the maximum power consumption of 150 W. With ignition off, the power outlets are deactivated. Additionally the power outlets are deactivated in the event of low vehicle battery voltage. Electrical accessories that are connected must comply with the electromagnetic compatibility requirements laid down in DIN VDE . Do not connect any current-delivering accessories, e.g. electrical charging devices or batteries. Do not damage the outlet by using unsuitable plugs.
A USB port is located in the instrument panel next to the Info Display. 
A USB port may be located within the compartment located above the glovebox. 
A further USB port may be located in the rear console. The USB ports are prepared for charging external devices and provide a data connection to the Infotainment system. For further information, see Infotainment manual.
The portable device to be charged must be compatible with the Qi standard, either by design or by using a compatible holder or shell. The charging zone is identified by the Qi symbol. To charge a device, the ignition must be switched on. To charge a mobile device:
The cigarette lighter is freely accessible. Depending on version, the cigarette lighter may be located behind the storage cover. Press cover to open. Press in cigarette lighter. It switches off automatically once the element is glowing. Pull out cigarette lighter.
A portable ashtray can be placed in the cupholders.
The upper edge of the head restraint should be at upper head level. If this is not possible for extremely tall people, set to highest position, and set to lowest position for small people.
Height adjustment 
Height Adjustment Pull the head restraint upwards or push it downwards.
Backrest Inclination
Turn the handwheel to suit personal requirements.
Push lever, fold backrest fully forwards and release the lever. Then push the backrest down further until it is completely flat.
Fold down the centre backrest by pulling the loop. 
Fold down the outer backrest by pulling the loop. Swing the backrest forwards until the seat is lowered on the vehicle floor. When retracted, the maximum weight on the backrest is 50 kg. 
To lift the seat cushion pull the lever and raise the seat cushion against the backrest until it locks. Storage cargo management system . Storage load compartment grille.
To remove the armrest fold it up, push and turn it to the position shown in the picture. Then pull off the armrest from the backrest. To fit the armrest engage it in the backrest. Push and fold the armrest in the upright position. Pull the armrest out a bit and fold it downwards.
Activate seat heating by pressing ß for the respective front seat. The LED in the button illuminates to indicate activation. Pressing ß once more deactivates seat heating. Seat heating is operational when engine is running and during an Auto stop. Stop-start system .
The backrests are properly engaged when the red mark near the release lever is no longer visible.
Attach the seat assembly front supports to the front anchor points.
Pull the handle, slide the seat, then release the handle. Try to move the seat back and forth to ensure that the seat is locked in place.
The seat belts are locked during heavy acceleration or deceleration of the vehicle, holding the occupants in the seat position. Therefore the risk of injury is considerably reduced. Seat belts are The seat belts are locked during heavy acceleration or deceleration of the vehicle, holding the occupants in the seat position. Therefore the risk of injury is considerably reduced.
Withdraw the belt from the retractor, guide it untwisted across the body and insert the latch plate into the buckle. Make sure the belt fits tightly to the body while driving.
Loose or bulky clothing prevents the belt from fitting snugly. Do not place objects such as handbags or mobile phones between the belt and your body.
Pull latch plates with the seat belt out of seat belt holder in the roof.
Insert lower latch plate into left-hand buckle (1) at the centre seat. Guide the upper latch plate with the seat belt over the lap area and the shoulder (do not twist) and insert it into right-hand buckle (2) at centre seat. To unfasten the seat belt, first press the button on the right-hand buckle (2) and remove upper latch plate. Then press the button on the left-hand buckle (1) and remove lower latch plate. The seat belt retracts automatically.
Warning
.
within the next 10 seconds until the LED of the button illuminates constantly.
, by pressing on one of the front door handles at the markings with electronic key system. The LED of the 
Press button to extend. To fold the key, first press the button.
Depending on the version, the radio remote control enables a operation of the following functions:
Batteries do not belong in household waste. They must be disposed of at an appropriate recycling collection point. 
more than 2 seconds. An audible signal is given and a message is displayed in the Graphic Info Display. 
Press 
. Only the driver’s door and the passenger door will be unlocked by pressing 
Press 
. If the vehicle is not closed properly, the central locking system will not work.
The electronic key must be outside the vehicle, within a range of approx. one metre of the relevant door side.
Pass a hand behind the door handle of one of the front doors or the rear door to unlock the vehicle or press the middle tailgate button. Keep the hand behind the door handle or keep the tailgate button pressed to open the windows. Unlocking mode can be set in the vehicle personalisation menu in the Info Display. Two settings are selectable:
Press with a finger or thumb on one of the door handles (at the markings) or press the tailgate button. All doors, load compartment and fuel filler flap will be locked. If the vehicle is not closed properly, the electronic key remains in the vehicle or the ignition is not off, locking will not be permitted.
Press 
Manually unlock the left front door by inserting and turning the key in the lock cylinder. The other doors can be opened by pulling the interior handle. The load compartment and fuel filler flap will possibly not be unlocked. By switching on the ignition, the anti-theft locking system is deactivated.
Manually lock the front doors by inserting and turning the key in the lock cylinder.
Turn the child lock in the rear door to the vertical position. The door cannot be opened from the inside. To deactivate, turn the child lock to the horizontal position.
Depending on version, the R button may be located in the driver’s door or below the light switch. 
Remotely operated system to prevent opening of the rear doors via the interior door handles and the use of the rear power windows.
This vehicle is a plug-in hybrid vehicle. It has a combustion engine and an automatic transmission with integrated electrical engine which enables electrical driving and charging of the battery during the deceleration and the braking of the vehicle. Additionally, the battery can be charged using a cable, e.g., at domestic electric outlets or public charging stations.
To activate B, select D and press button B Do not accelerate while engaging a gear. Never depress the accelerator pedal and brake pedal at the same time. When a gear is engaged, the vehicle slowly begins to creep when the brake is released. To deactivate B, press button B. Regenerative braking .
Move the selector or press the respective buttons.
Press button M. Pull steering wheel paddles to select gears manually. Pull right paddle + to shift to a higher gear. Pull left paddle – to shift to a lower gear. Multiple pulls allow gears to be skipped.
illuminates a message is displayed in the Driver Information Centre. Electronic transmission control enables only third gear. The transmission no longer shifts automatically. Do not drive faster than 62 mph. Have the cause of the fault remedied by a workshop.
To engage reverse, with the vehicle stationary and engine at idle depress the clutch pedal, pull the ring under the selector lever and engage the gear. If the gear does not engage, set the selector lever to neutral, release the clutch pedal and depress again. Then repeat gear selection. Do not slip the clutch unnecessarily. When operating, depress the clutch pedal completely. Do not use the pedal as a foot rest. When clutch slip is detected for a specific time, the engine power will be reduced. A warning is displayed in the Driver Information Centre. Release the clutch.
Short press: switch the system on / off or mute the sound. Long press: switch to standby mode. 
Touch is used to open a menu or select an option.
Touch and hold can be used to save radio stations.
Swipe is used to scroll through a menu or to pan the map. Returning to the previous screen in a submenu To return to the previous screen, touch 5 in the upper part of the screen. Displaying and hiding the menu Within an app, the menu can be displayed and hidden by touching K.
To display a list of all availabe apps, touch . Alternatively, the apps overview will be displayed by a 3-finger touch on the screen.
and touch the menu for the system settings .
The following system settings can be adjusted:
open the settings app 
. Some widgets are available in different sizes. The bigger a widget is, the less widgets can be displayed on a page.
Switching the radio stations Touch 
briefly to perform an automatic search for the next radio station. Touch and hold 
briefly to perform an automatic search for the previous radio station. Touch and hold 
. The saved radio stations will be lined up in the lower part of the screen. Touch the desired radio station to tune in. To save the current radio station, touch and hold the desired button. Buttons which are already used for radio stations can be overwritten. Unused buttons for saving radio stations will be indicated by g. Alternatively, radio stations can be saved by touching the corresponding heart icon in the station list.
. 
Active route guidance
to view map downloads, to set the map colour, to set the points of interest shown on the map and other map settings, to set the arrival information, to set the side bar on the route guidance screen, to set the map orientation or to show the vehicle range on the map. Touch 
to set the options for rerouting, to set the preferred route types (fast, short, eco-friendly) or to avoid specific routes (toll roads, unpaved roads, etc.). Touch 
Different dipsticks are used depending on engine variant.
Pull out the dipstick, wipe it clean, reinsert it fully, pull out and read the engine oil level.
If the cooling system is cold, the coolant level should be above the MIN mark. Top up if the level is low.
Fill with clean water mixed with a suitable quantity of approved windscreen washer fluid which contains antifreeze.
The brake fluid level must be between the DANGER and MAX marks. If fluid level is below DANGER seek the assistance of a workshop. Brake and clutch fluid
Unless otherwise indicated in the service display.
Turn adjuster wheel:
: sidelights
: low beam / high beam Control indicator
When the automatic light control function is switched on, the system switches between daytime running lights and headlights automatically depending on the external lighting conditions and information given by the wiper system. Daytime running light .
To activate or deactivate the high beam, pull the lever beyond the resistance point.
illuminates continuously when the high beam assist is activated, the blue 
illuminates when high beam is on.
To adapt headlight range manually to the vehicle load to prevent dazzling, turn thumb wheel 
to required position. 0 : front seats occupied 1 : all seats occupied 2 : all seats occupied and load compartment laden 3 : driver’s seat occupied and load compartment laden
Activated automatically at a speed up to approx. 30 mph. The light is wide and symmetrical.
If bad weather conditions are detected, low beam is dimmed to avoid dazzling the oncoming traffic.
Particular LEDs, based on direction of travel, are additionally triggered to improve lighting. This function is activated at a speed up to 25 mph when turning off.
Particular LEDs, based on steering angle and speed, are additionally triggered to improve lighting in curves. This function is activated at speeds from 25 mph to 43 mph.
To assist driver’s orientation when parking, cornering lights and reversing light illuminate when headlights are activated and reverse gear is engaged. Cornering light and reversing light remain illuminated for a short time after disengaging the reverse gear, or when accelerating to a speed above approx. 6 mph.
Each LED on right or left side is triggered or faded out particularly according to the traffic situation. This gives the best light distribution without dazzling other road users. Glare-free high beam is switched on automatically at a speed above 22 mph. It is switched off at a speed below 22 mph, but the system remains active.
Activated automatically at a speed above 65 mph. Illumination is adapted to the higher speed driven on motorways. If there is oncoming traffic, following vehicles ahead or passing, the illumination on the side of the vehicle is reduced.
Operated by pressing . When braking in an emergency, the hazard warning flashers are switched on automatically, depending on the force of deceleration. They are switched off automatically, as soon as the vehicle is accelerated again.
Turn the adjuster wheel forwards /backwards to switch on / off. Light switch in position AUTO: switching on front fog lights will switch headlights on automatically.
When the vehicle is parked, the parking lights on one side can be activated:
Operated by pressing .
Operated by pressing .
In addition to warning lights, gauges and indicators, the following information is available:
Press the button to scroll through the pages or to close a pop-up message.
Several pages can be created by choosing widgets to be displayed. It is possible to memorise up to five pages with one or two widgets each.
The Info Display can indicate:
to display the menu for the driver assistance systems.
to display the home screen.
to display the climate menu. Touch required menu display icon or a function with the finger. Confirm a required function or selection by touching.
Several pages can be created by choosing widgets to be displayed.
.
One widget can be chosen for the head-up display.
Indicates vehicle speed.
The total recorded distance is displayed in miles.
Displays the engine speed. Drive in a low engine speed range for each gear as much as possible. A red marker indicates the beginning of the warning zone of excessive revolutions. For Diesel engines, the warning zone starts at 5000 revolutions per minute. For petrol engines, the warning zone starts at 6500 revolutions per minute.
Never run the fuel tank dry. The top-up quantity may be less than the specified fuel tank capacity, due to the remaining fuel in the tank.
Displays the high voltage battery state of charge.
The power indicator gauge informs about the current energy situation of the vehicle.
Unlock lever, adjust steering wheel, then engage lever and ensure it is fully locked. Do not adjust steering wheel unless vehicle is stationary and steering wheel lock has been released.
Infotainment system Cruise control Speed limiter Adaptive cruise control
Activate the heating by pressing Z. Activation is indicated by the control indicator in the button. Activation via the Info Display The heating can be activated or deactivated by touching Z in the climate menu ;. Activation is indicated by Z in the status bar.
Press
2 : fast 
Wiper lever in position INT, it is possible to select five frequency levels by turning the ring.
2 : fast 
Keep the sensor free from dust, dirt and ice.
Turn the adjuster wheel to adjust the sensitivity. The longest dash indicates the highest sensitivity and the shortest dash indicates the lowest sensitivity.
Pull lever. Washer fluid is sprayed onto the windscreen and the wiper wipes a few times.
Off Intermittent wiping Screen wash Do not use if the rear window is frozen. Switch off in car washes. The rear window wiper comes on automatically when the windscreen wiper is switched on and reverse gear is engaged.
A 12 V power outlet is located in the centre console. Depending on version, another 12 V power outlet is located in the load compartment. Do not exceed the maximum power consumption of 120 W. The 12 V power outlet is deactivated in the event of low vehicle battery voltage. Electrical accessories that are connected must comply with the electromagnetic compatibility requirements laid down in DIN VDE . Do not connect any current-delivering accessories, e.g. electrical charging devices or batteries. Do not damage the outlet by using unsuitable plugs.
The LED indicates the current charging status.
A portable ashtray can be placed in the cupholders.
The upper edge of the head restraint should be at upper head level. If this is not possible for extremely tall people, set to highest position, and set to lowest position for small people.
Pull the head restraint upwards or press the catch to release and push the head restraint downwards. 
Press the catch and move the head restraint upwards, downwards, forwards or backwards until the desired position is adjusted.
Pull the lever and slide the thigh support.
Move switch forwards / backwards.
Tilt switch forwards / backwards.
Adjust lumbar support using the four-way switch to suit personal requirements. Press and hold the front or rear of the switch to increase or decrease the lumbar support. Press and hold the top or bottom of the switch to raise or lower the lumbar support.
Press and hold the front or rear of the button to raise or lower the thigh support.
Storing Memory Position
The heating can be adjusted by turning the thumb wheels in the centre console. Prolonged use of the highest intensity for people with sensitive skin is not recommended. The settings are memorised when the ignition is switched off.
The seat belts are locked during heavy acceleration or deceleration of the vehicle, holding the occupants in the seat position. Therefore the risk of injury is considerably reduced. Seat belts are designed to be used by only one person at a time. Child restraint system Periodically check all parts of the belt system for damage, soiling and proper functionality. Have damaged components replaced. After an accident, have the seat belts and triggered belt pretensioners replaced by a workshop.
Withdraw the belt from the retractor, guide it untwisted across the body and insert the latch plate into the buckle. Make sure the belt fits tightly to the body while driving.
Loose or bulky clothing prevents the belt from fitting snugly. Do not place objects such as handbags or mobile phones between the belt and your body.
To release belt, press red button on belt buckle.
Press 
on the radio remote control or touch the sensor of the driver’s door handle twice within five seconds. 
Switch off the monitoring of passenger compartment and vehicle inclination when animals are being left in the vehicle, because of high volume ultrasonic signals or movements triggering the alarm. Also, switch off when the vehicle is on a ferry or train.
within ten seconds until the LED in the button 
Press button to extend. To fold the key, first press the button.
Push the latch to extract the integral key.
Unlocks the vehicle 
locks the vehicle 
Long press unlocks and Opens the tailgate Enables operation of the following functions via the use of the remote control buttons: Central locking system Anti-theft locking system Anti-theft alarm system Tailgate unlocking Power windows Mirrors folding Vehicle locator lighting The remote control has a range of up to 50 m, but may also be much less due to external influences. The hazard warning flashers confirm operation. Handle with care, protect from moisture and high temperatures and avoid unnecessary operation.
illuminates and a warning message is displayed in the Driver Information Centre. Batteries do not belong in household waste. They must be disposed of at an appropriate recycling collection point. 
Enables a keyless operation of the following functions:
Batteries do not belong in household waste. They must be disposed of at an appropriate recycling collection point. 
Press 
Press and hold 
The central locking system can also be operated with the buttons on the electronic key. Press 
The central locking system can also be operated by touching the sensor of the driver’s door handle. Touch the sensor of the driver’s door handle to unlock or to lock.
Press 
Manually unlock the left front door by inserting and turning the key in the lock cylinder. The other doors can be opened by pulling the interior handle. The load compartment and fuel filler flap will possibly not be unlocked. By switching on the ignition, the anti-theft locking system is deactivated.
Manually lock the front doors by inserting and turning the key in the lock cylinder. 
To lock the other doors, open the rear doors. Ensure that child lock is deactivated. Insert key carefully and turn it to the inner side of the doors. Then, remove key. Close the doors. The fuel filler flap and tailgate are possibly not locked.
This function can be activated or deactivated at any time. With the ignition on, press b until an audible signal starts and a corresponding message is displayed. The state of the system stays in memory when switching off the ignition.
Turn the child lock in the rear door outwards to the horizontal position by using a key. The door cannot be opened from the inside. To deactivate, turn the child lock in the opposite direction.
Short press: switch the system on / off or mute the sound.
Rotate: adjust the volume.
.
briefly to perform an automatic search for the next radio station.
briefly to perform an automatic search for the previous radio station.
. The saved radio stations will be lined up in the lower part of the screen. Touch the desired radio station to tune in.
.
to view map downloads, to set the map colour, to set the points of interest shown on the map and other map settings, to set the arrival information, to set the side bar on the route guidance screen, to set the map orientation or to show the vehicle range on the map.
to set the options for rerouting, to set the preferred route types (fast, short, eco-friendly) or to avoid specific routes (toll roads, unpaved roads, etc.).
: sidelights
: low beam / high beam
to required position.
