Meet the 2023 Chevrolet Blazer, a rugged and stylish SUV that blends toughness and elegance. The Blazer stands out on the road because it has a bold design with sharp lines and a strong front grille. When you step inside the roomy and elegant cabin, you’ll find a comfy and well-equipped cabin with modern technology and high-quality materials. The Blazer comes with a variety of powerful engines that give it amazing performance and a fun ride. The Blazer gives you trust and peace of mind behind the wheel thanks to its high-tech safety features and driver-assistance technologies. The Blazer’s strong handling and available all-wheel drive system give you control and flexibility, whether you’re driving on city streets or going off the beaten path. The 2023 Chevrolet Blazer is a great choice for people who want a unique SUV that stands out from the crowd. It has a great mix of style, speed, and usefulness.
The names, logos, emblems, slogans, vehicle model names, and vehicle body designs appearing in this manual including, but not limited to, GM, the GM logo, CHEVROLET, the CHEVROLET Emblem, and BLAZER are trademarks and/or service marks of General Motors LLC, its subsidiaries, affiliates, or licensors. For vehicles first sold in Canada, substitute the name “General Motors of Canada Company” for Chevrolet Motor Division wherever it appears in this manual. This manual describes features that may or may not be on the vehicle because of optional equipment that was not purchased on the vehicle, model variants, country specifications, features/applications that may not be available in your region, or changes subsequent to the printing of this owner’s manual, including changes in standard or optional content. Refer to the purchase documentation relating to your specific vehicle to confirm the features. Keep this manual in the vehicle for quick reference.
Canadian Vehicle Owners
A French language manual can be obtained from your dealer, at www.helminc.com, or from: Proprietaries Canadiens On peat oftener un exempla ire dece guide a François après du concessionaire out à l’adresse salivate: Helm, Incorporated Attention: Customer Service 47911 Halyard Drive Plymouth, MI 48170 USA
Using this Manual
To quickly locate information about the vehicle, use the Index in the back of the manual. It is an alphabetical list of what is in the manual and the page number where it can be found.
Danger, Warning, and Caution
Warning messages found on vehicle labels and in this manual describe hazards and what to do to avoid or reduce them Danger Danger indicates a hazard with a high level of risk that will result in serious injury or death. Warning Warning indicates a hazard that could result in injury or death. Caution indicates a hazard that could result in property or vehicle damage. A circle with a slash through it is a safety symbol which means “Do not,” “Do not do this,” or “Do not let this happen.”
The vehicle has components and labels that use symbols instead of text. Symbols are shown along with the text describing the operation or information relating to a specific component, control, message, gauge, or indicator. Shown when the owner’s manual has additional instructions or information. Shown when the service manual has additional instructions or information. Shown when there is more information on another page Vehicle Symbol Chart Here are some additional symbols that may be found on the vehicle and what they mean. See the features in this manual for information. Air Conditioning System Air Conditioning Refrigerant Oil Airbag Readiness Light Antilock Brake System (ABS) Brake System Warning Light Dispose of Used Components Properly Do Not Apply High Pressure Water Engine Coolant Temperature Flame/Fire Prohibited Flammable Collision Alert Fuse Block Cover Lock Location Fuses ISOFIX/LATCH System Child Restraints Keep Fuse Block Covers Properly Installed
If there is a decrease in the remote key operating range:
- Check the distance. The remote key may be too far from the vehicle.
- Check the location. Other vehicles or objects may be blocking the signal.
- Check the remote key’s battery. See “Battery Replacement” later in this section.
- If the remote key is still not working correctly, see your dealer or a qualified technician for service.
Remote Key Operation The Keyless Access system allows for vehicle entry when the remote key is within 1 m (3 ft). See “Keyless Access Operation” later in this section. The remote key may work up to 60 m (197 f t) away from the vehicle. Other conditions can affect the performance of the remote key.
With Remote Start and Power Liftgate
Press to lock all doors. The turn signal indicators may flash and/or the horn may sound on the second press to indicate locking. To view available settings for this feature, touch the Settings icon on the infotainment home page. Select “Vehicle” to display the list of available options and select “Remote Lock, Unlock, Start”. If the driver door is open when is pressed, and Open Door Anti-Lockout is enabled, all doors will lock and then the driver door will immediately unlock. To view available settings for this feature, touch the Settings icon on the infotainment home page. Select “Vehicle” to display the list of available options and select “Power Door Locks”. If a passenger door is open when Q is pressed, all doors lock. Pressing may also arm the theft-deterrent system. Press to unlock the driver door. Press unlock again within five seconds to unlock all doors. The remote key can be programmed to unlock all doors on the first button press. To view available settings for this feature, touch the Settings icon on the infotainment home page. Select “Vehicle” to display the list of available options and select “Remote Lock, Unlock, Start”. The turn signal indicators may flash to indicate unlocking has occurred. Pressing may also disarm the theft-deterrent system. If equipped with remote windows, press and hold K to remotely open the windows, if enabled. To view available settings for this feature, touch the Settings icon on the infotainment home page. Select “Vehicle” to display the list of available options and select “Remote Lock, Unlock, Start”. If equipped, press twice quickly to open or close the liftgate. Press again to stop the power liftgate. Press and release one time to initiate the vehicle locator. The exterior lamps flash and the horn chirps three times. Press and hold for at least three seconds to sound the panic alarm. The horn sounds and the turn signals flash for 30 seconds, or until is pressed again or the vehicle is started. If equipped, first press and release then immediately press and hold for at least four seconds to start the engine from outside the vehicle using the remote key.
Keyless Access Operation
The Keyless Access system allows the doors to be locked and unlocked and the liftgate to be accessed without removing the remote key from a pocket, purse, briefcase, etc. The remote key should be within 1 m (3 ft) of the liftgate or door being opened. There will be buttons on the outside door handles. Keyless Access can be programmed to unlock all doors on the first lock/unlock press from the driver door. Keyless Access can also be turned off. To view available settings for this feature, touch the Settings icon on the infotainment home page. Select “Vehicle” to display the list of available options and select “Remote Lock, Unlock, Start”. If equipped with memory seats, remote keys 1 and 2 are linked to seating positions of memory 1 or 2.
Keyless Unlocking/Locking from the Driver Door
When the doors are locked and the remote key is within 1 m (3 ft) of the driver door handle, pressing the lock/unlock button on the driver door handle will unlock the driver door. If the lock/unlock button is pressed again within five seconds, all passenger doors will unlock.
Driver Shown, Passenger Similar
Pressing the lock/unlock button will cause all doors to lock if any of the following occur:
- It has been no more than five seconds since the first lock/unlocks button press.
- Two lock/unlock button presses were used to unlock all doors.
- Any vehicle door has opened and all doors are now closed.
Temporary Disable of Passive Locking
Temporarily disable passive locking by pressing and holding on the interior door switch with a door open for at least four seconds, or until three chimes are heard. Passive locking will then remain disabled until on the interior door is pressed, or until the vehicle is turned on. Remote Left in Vehicle Alert When the vehicle is turned off and an remote key is left in the vehicle, the horn will chirp three times after all doors are closed. To view available settings for this feature, touch the Settings icon on the infotainment home page. Select “Vehicle” to display the list of available options and select “Remote Lock, Unlock, Start”. Remote No Longer in Vehicle Alert If the vehicle is on with a door open, and then all doors are closed, the vehicle will check for remote keys inside. If an remote key is not detected, the Driver Information. Center (DIC) will display NO REMOTE DETECTED and the horn will chirp three times. This occurs only once each time the vehicle is driven. To view available settings for this feature, touch the Settings icon on the infotainment home page. Select “Vehicle” to display the list of available options and select “Remote Lock, Unlock, Start”. Keyless Liftgate Opening Press the touchpad in the liftgate handle to open the liftgate if the remote key is within 1 m (3 ft). Key Access To access a vehicle with a weak remote key battery,
Programming Remote Keys to the Vehicle
Only remote keys programmed to the vehicle will work. If a remote key is lost or stolen, a replacement can be purchased and programmed through your dealer. The vehicle can be reprogrammed so that lost or stolen remote keys no longer work. Each vehicle can have up to eight remote keys matched to it. Programming with Recognized Remote Keys A new remote key can be programmed to the vehicle when there are two recognized remote keys. To program, the vehicle must be off and all of the remote keys, both currently recognized and new, must be with you.
- Remove the key lock cylinder cap on the driver door handle. Place the two recognized remote keys in the cupholder.
- Insert the vehicle key of the remote key into the key lock cylinder on the driver door handle and turn the key, counterclockwise, to the unlock position five times within 10 seconds. The DIC displays READY FOR REMOTE 3, 4, 5, ETC.
- Remove the remote key from the front cupholder and press the remote key or button. To program additional remote keys, repeat Steps 4–6.
- When all additional remote keys are programmed, press and hold ENGINE START/STOP for 12 seconds to exit programming mode.
- Put the key back into the remote key.
- Replace the key lock cylinder cap.
Starting the Vehicle with a Low Remote Key Battery When the vehicle is started, if the transmitter battery is weak, the DIC may display NO REMOTE DETECTED or NO REMOTE KEY WAS DETECTED PLACE KEY IN THE TRANSMITTER POCKET THEN START YOUR VEHICLE. The DIC may then display REPLACE BATTERY IN REMOTE KEY.
To start the vehicle:
- Place the transmitter in the front cupholder.
- With the vehicle in P (Park) or N (Neutral), press the brake pedal and ENGINE START/STOP. Replace the transmitter battery as soon as possible.
Remote Vehicle Start
If equipped, this feature allows the engine to be started from outside of the vehicle. This button will be on the remote key the vehicle has remote start. The climate control system will use the previous settings during a remote start. The rear defog may come on during a remote start based on cold ambient conditions. The rear fog indicator light does not come on during a remote start. If the vehicle has auto-heated or ventilated seats, they may come on during a remote start. If equipped with a remote start heated steering wheel, it may come on during a remote start when it is cold outside, if enabled. To view available settings for this feature, touch the Settings icon on the infotainment home page. Select “Vehicle” to display the list of available options and select “Comfort and Convenience”. Laws in some local communities may restrict the use of remote starters. For example, some laws may require a person using remote start to have the vehicle in view. Check local regulations for any requirements. Do not use the remote start feature if the vehicle is low on fuel. The vehicle could run out of fuel. Other conditions can affect the performance of the remote key.
Starting the Engine Using Remote Start
- Press and release Q on the remote key.
- Immediately press and hold for at least four seconds or until the turn signal lamps flash. The turn signal lamps flashing confirms the request to remote start the vehicle has been received. During the remote start the doors will be locked and the parking lamps will remain on as long as the engine is running. The engine will shut off after 15 minutes unless a time extension is done or the vehicle is started.
- With the remote key in the vehicle, press the brake pedal and start the vehicle to drive.
Extending Engine Run Time The engine run time can also be extended by another 15 minutes if during the first 15 minutes Steps 1 and 2 are repeated while the engine is still running. An extension can be requested 30 seconds after starting. This provides a total of 30 minutes. The remote start can only be extended once. When the remote start is extended, the second 15-minute period is added on to the first 15 minutes for a total of 30 minutes. A maximum of two remote starts, or a remote start with an extension, are allowed between ignition cycles. The vehicle must be started normally before the remote start procedure can be used again.
Canceling a Remote Start
To cancel a remote start, do any of the following:
- Press and hold until the parking lamps turn off.
- Turn on the hazard warning flashers.
- Turn the vehicle on and then off..
Conditions in Which Remote Start Will Not Work The remote start will not operate if any of the following occur:
- A remote key is in the vehicle.
- The hood is not closed.
- The ignition is in any mode other than off.
- The hazard warning flashers are on.
- There is an emission control system malfunction.
- The engine coolant temperature is too high.
- The oil pressure is low.
- Two remote vehicle starts or a start with an extension have already been used.
- The vehicle is not in P (Park).
Warning Unlocked doors can be dangerous.
- Passengers, especially children, can easily open the doors and fall out of a moving vehicle. The doors can be unlocked and opened while the vehicle is moving. The chance of being thrown out of the vehicle in a crash is increased if the doors are not locked. So, all passengers should wear seat belts properly and the doors should be locked whenever the vehicle is driven.
- Young children who get into unlocked vehicles may be unable to get out. A child can be overcome by extreme heat and can suffer permanent injuries or even death from heat stroke. Always lock the vehicle whenever leaving it.
- Outsiders can easily enter through an unlocked door when you slow down or stop the vehicle. Locking the doors can help prevent this from happening.
Driver Door Key
Lock Cylinder Access (In Case of Dead Battery) To access the driver door key lock cylinder:
- Pull the door handle (1) to the open position and hold it open until cap removal is complete.
- Insert the key into the slot (3) on the bottom of the cap (2) and lift the key upward.
- Move the cap (2) rearward and remove.
- Use the key in the cylinder.
To access the driver door key lock cylinder:
- Pull the door handle (1) to the open position and hold it open until cap installation is complete.
- Insert the two tabs (6) at the back of the cap between the seal (5) and the metal base (4).
- Slide the cap forward and press the forward edge to install the cap in place.
- Release the door handle.
- Check that the cap is secure.
Free-Turning Locks The door key lock cylinder turns freely when either the wrong key is used, or the correct key is not fully inserted. The free-turning door lock feature prevents the lock cylinder from being forced open. To reset the lock cylinder, ensure the correct key is fully inserted into the lock cylinder. Rotate the key until you feel the lock cylinder click back into place. Remove the key and reinsert fully, rotate the key to unlock the vehicle.
Power Door Locks
Press to lock the doors. The indicator light in the switch will illuminate when locked. Press to unlock the doors. Delayed Locking This feature delays the locking of the doors until five seconds after all doors are closed. Delayed locking can only be turned on when the Open Door Anti-Lockout feature has been turned off. When is pressed on the power door lock switch while the door is open, a chime will sound three times indicating delayed locking is active. The doors will lock automatically five seconds after all doors are closed. If a door is reopened before that time, the five-second timer will reset when all doors are closed again. Press on the door lock switch again or press on the RKE transmitter to lock the doors immediately. This feature can also be programmed. To view available settings for this feature, touch the Settings icon on the infotainment home page. Select “Vehicle” to display the list of available options and select “Power Door Locks”.
Automatic Door Locks
The doors will lock automatically when all doors are closed, the ignition is on, and the vehicle is shifted out of P (Park). If a vehicle door is unlocked and then opened and closed, the doors will lock either when your foot is removed from the brake or the vehicle speed becomes faster than 13 km/h (8 mph). To unlock the doors:
- Press on a door.
- Shift the transmission into P (Park).
Automatic door locking cannot be disabled. Automatic door unlocking can be programmed. To view available settings for this feature, touch the Settings icon on the infotainment home page. Select “Vehicle” to display the list of available options and select “Power Door Locks”.
Warning Exhaust gases can enter the vehicle if it is driven with the liftgate or trunk/hatch open, or with any objects that pass through the seal between the body and the trunk/hatch or liftgate. Engine exhaust contains carbon monoxide (CO) which cannot be seen or smelled. It can cause unconsciousness and even death. If the vehicle must be driven with the liftgate or trunk/hatch open:
- Close all of the windows.
- Fully open the air outlets on or under the instrument panel.
- Adjust the climate control system to a setting that brings in only outside air and set the fan speed to the highest setting. See “Climate Control Systems” in the Index.
- If the vehicle is equipped with a power liftgate, disable the power liftgate function.
Caution To avoid damage to the liftgate or liftgate glass, make sure the area above and behind the liftgate is clear before opening it.
To open the liftgate, press the touch pad in the liftgate handle and lift up. Unlocking all doors will also unlock the liftgate. Use the pull cup to lower and close the liftgate. Do not press the touch pad while closing the liftgate. This will cause the liftgate to be unlatched The liftgate can be opened when locked if the remote key is within 1 m (3 ft) of the touch pad. The liftgate has an electric latch. If the battery is disconnected or has low voltage, the liftgate will not open. The liftgate will resume operation when the battery is reconnected and charged.
Power Liftgate Operation
Warning You or others could be injured if caught in the path of the power liftgate. Make sure there is no one in the way of the liftgate as it is opening and closing. Caution Driving with an open and unsecured liftgate may result in damage to the power liftgate components. If equipped with a power liftgate, the switch is on the driver’s door. The vehicle must be in P (Park). The modes are:
- MAX: Opens to maximum height.
- 3/4: Opens to a reduced height that can be set from 3/4 to fully open. Use to prevent the liftgate from opening into overhead obstructions such as a garage door or roof-mounted cargo. The liftgate can be manually opened all the way.
- OFF: Opens manually only. To power open or close the liftgate, select MAX or 3/4 mode.
- Press b twice quickly on the remote key until the liftgate moves.
- Press 8 on the driver door. The driver door must either be unlocked or locked without the security armed.
- Press the touch pad in the liftgate handle after unlocking all doors. The remote key must be within 1 m (3 ft).
- Press l on the bottom of the liftgate.
Press any liftgate button or the touch pad while the liftgate is moving to stop it. reverse direction. The touchpad in the liftgate handle cannot be used to close the liftgate. Caution Manually forcing the liftgate to open or close during a power cycle can damage the vehicle. Allow the power cycle to complete. The power liftgate may be temporarily disabled under extreme low temperatures, or after repeated power cycling over a short period of time. If this occurs, the liftgate can still be operated manually. If the vehicle is shifted out of P (Park) while the power function is in progress, the liftgate will continue to completion. If the vehicle is accelerated before the liftgate has completed moving, the liftgate may stop or reverse direction. Check for Driver Information Center (DIC) messages and make sure the liftgate is closed and latched before driving.
If equipped, the liftgate may be operated with a kicking motion under the left side of the rear bumper at the location of the projected logo. See “Projected Logo” later in this section. The remote key must be within 1 m (3 ft). The hands-free feature will not work while the liftgate is moving. To stop the liftgate while in motion use one of the liftgate witches. The hands-free feature can be customized. To view available settings for this feature, touch the Settings icon on the infotainment home page. Select “Vehicle” to display the list of available options and select “Comfort and Convenience”. Choose from the following: On-Open and Close: The kicking motion is activated to both open and close the liftgate On-Open Only: The kicking motion is activated to only open the liftgate. Off: The feature is disabled
- Do not sweep your foot side to side.
- Do not keep your foot under the bumper; the liftgate will not activate.
- Do not touch the liftgate until it has
To operate, move your foot in a forward kicking motion under the left side of the rear bumper, at the location of the projected logo, then pull it back. Then step back. The kick must come within 14 cm (6 in) of the rear bumper to activate. Caution Splashing water may cause the liftgate to open. Keep the RKE transmitter away from the rear bumper detection area or turn the liftgate mode to OFF when cleaning or working near the rear bumper to avoid accidental opening.
- Do not sweep your foot side to side.
- Do not keep your foot under the bumper; the liftgate will not activate.
- Do not touch the liftgate until it has stopped moving.
This feature may be temporarily disabled under some conditions. If the liftgate does not respond to the kick, open or close the liftgate by another method or start the vehicle. The feature will be re-enabled. When closing the liftgate using this feature, there will be a short delay. The taillamps will flash and a chime will sound. Step away from the liftgate before it starts moving.
If equipped with this feature, a vehicle logo will be projected for one minute onto the ground near the rear bumper when an remote key is detected within approximately 2 m (6 ft). The projected logo may not be visible under brighter daytime conditions
- 1 m (3 ft) Hands-Free Operation Detection Zone
- 2 m (6 ft) Projected Logo Detection Zone
This vehicle has a passive theft-deterrent system. The system does not have to be manually armed or disarmed. The vehicle is automatically immobilized when the remote key leaves the vehicle. The immobilization system is disarmed when the ignition is turned on or in ACC/ ACCESSORY and a valid remote key is in the vehicle. The security light, in the instrument cluster, comes on if there is a problem with arming or disarming the theft-deterrent system. The system has one or more remote keys matched to an immobilizer control unit in the vehicle. Only a correctly matched remote key will start the vehicle. If the remote key is ever damaged, you may not be able to start the vehicle. When trying to start the vehicle, the security light may come on briefly when the ignition is turned on. If the engine does not start and the security light stays on, there is a problem with the system. Turn the ignition off and try again. If the ignition will not change from off to on or ACC/ACCESSORY, and the remote key appears to be undamaged, try another remote key. Or, you may try placing the remote key in the cupholder in the centre console. If the vehicle will not start with the other remote key, or with the remote key in the cupholder, the vehicle needs service. If the vehicle does start, the first remote key may be faulty. See your dealer who can service the theft-deterrent system and have a new remote key programmed to the vehicle. learn new or replacement remote keys. Up to eight remote keys can be programmed to the vehicle. Do not leave the remote key or device that disarms or deactivates the theft-deterrent system in the vehicle.
Warning A convex mirror can make things, like other vehicles, look farther away than they are. If you cut too sharply into the right lane, you could hit a vehicle on the right. Check the inside mirror or glance over your shoulder before changing lanes. The passenger side mirror is convex-shaped. A convex mirror surface is curved so more can be seen from the driver seat.
To adjust each mirror:
- Press j or | to select the driver or passenger side mirror. The indicator light will illuminate.
- Press the arrows on the control pad to move the mirror in the desired direction.
- Adjust each outside mirror so that a little of the vehicle and the area behind it can be seen.
- Press j or | again to deselect the mirror.
Memory Mirrors The vehicle may have memory mirrors. Lane Change Alert (LCA) The vehicle may have LCA.
Warning Never leave a child, a helpless adult, or a pet alone in a vehicle, especially with the windows closed in warm or hot weather. They can be overcome by the extreme heat and suffer permanent injuries or even death from heat stroke. The vehicle aerodynamics are designed to improve fuel economy performance. Wind buffeting is normal when driving above 65 km/h (40 mph). If driving with one or both rear windows down, open the front window. If driving with one front window open, open the other front window, or vent/ open the sunroof, if equipped, to the comfort stop position.
Warning Children could be seriously injured or killed if caught in the path of a closing window. Never leave the remote key in a vehicle with children. When there are children in the rear seat, use the window lockout switch to prevent the operation of the windows. The power windows work when the ignition is on, in ACC/ACCESSORY, or when Retained Accessory Power (RAP) is active. Using the window switch, press to open or pull to close the window. The windows may be temporarily disabled if they are used repeatedly within a time.
This feature stops the rear passenger window switches from working:
- Press 2 to engage the rear window lockout feature. The indicator light is on when engaged.
- Press 2 again to disengage.
Window Express Movement All windows can be opened without holding the window switch. Press the switch down fully and quickly release it to open the window. If equipped, pull the window switch up fully and quickly release it to close the window. Briefly press or pull the window switch in the same direction to stop that window’s express movement.
Window Automatic Reversal System
The express-close feature will reverse window movement if it comes in contact with an object. Extreme cold or ice could cause the window to auto-reverse. The window will operate normally after the object or condition is removed.
Automatic Reversal System Override
Warning If the automatic reversal system override is active, the window will not reverse automatically. You or others could be injured and the window could be damaged. Before using the automatic reversal system override, make sure that all people and obstructions are clear of the window path. When the engine is on, override the automatic reversal system by pulling and holding the window switch if conditions prevent it from closing
The vehicle’s front seats have adjustable head restraints in the outboard seating positions. Warning With head restraints that are not installed and adjusted properly, there is a greater chance that occupants will suffer a neck/spinal injury in a crash. Do not drive until the head restraints for all occupants are installed and adjusted properly. If your vehicle has rear head restraints that fold down, always return them to the full upright position whenever an occupant is seated in the seat. Adjust the head restraint so that the top of the restraint is at the same height as the top of the occupant’s head. This position reduces the chance of a neck injury in a crash. Front Seats The vehicle’s front seats have adjustable head restraints in the outboard seating positions. The height of the head restraint can be adjusted. To raise or lower the head restraint, press the button located on the side of the head restraint and pull up or push the head restraint down, and release the button. Pull and push on the head restraint after the button is released to make sure that it is locked in place. The front seat outboard head restraints are not removable.
Rear Head Restraint Adjustment The vehicle’s rear seats have adjustable head restraints in the outboard seating positions. The height of the head restraint can be adjusted. Pull the head restraint up to raise it. Try to move the head restraint to make sure that it is locked in place. To lower the head restraint, press the button, located on the top of the seatback, and push the head restraint down. Try to move the head restraint after the button is released to make sure that it is locked in place.
Folding the Rear Head Restraint
If equipped, the head restraint can be folded rearward to allow for better visibility when the rear seat is unoccupied. To fold the head restraint, press the button on the side of the head restraint. The head restraint will fold rearward automatically. When an occupant or child restraint is in the seat, always return the head restraint to the full upright position. Pull the head restraint up and forward until it locks into place. Push and pull on the head restraint to make sure that it is locked. Always adjust the head restraint so that the top of the restraint is at the same height as the top of the occupant’s head. Rear outboard head restraints are not removable.
Read all instructions for the Head Restraints User Guide
If equipped, the memory seat feature allows drivers to save their unique driving positions and a shared exit position. The saved positions can be recalled manually by all drivers, see “Manually Recalling Seating Positions” later in this section, and drivers with remote keys 1 and 2 can also recall them automatically. See “Auto Seat Entry Memory Recall” or “Auto Seat Exit Memory Recall” later in this section. To enable automatic recalls, turn on Seat Entry Memory and/or Seat Exit Memory. See “Enabling Automatic Recalls” later in this section. The memory recalls may be cancelled at any time during the recall. See “Cancel Memory Seating Recalls” later in this section. Identifying Driver Number The vehicle identifies the current driver by their remote key number 1–8. The current remote key number may be identified by the Driver Information Center (DIC) welcome message, “You are driver x for memory recalls.” This message is displayed the first few times the vehicle is turned on when a different remote key is used. For Seat Entry Memory to work properly, save positions to the 1 or 2 memory buttons matching the driver number of this welcome message. To aid in identifying remote key IDs, it is recommended to only carry one remote key when entering the vehicle. Perform the following if the welcome message is not displayed:
- Move all keys and remote keys away from the vehicle.
- Start the vehicle with another remote key. A DIC welcome message should be displayed indicating the driver number of the other remote key.
- Turn the vehicle off and remove the other key or remote key from the vehicle.
- Start the vehicle with the initial key or remote key. The DIC welcome message should display the driver number of the initial remote key.
Saving Seating Positions Read these instructions completely before saving memory positions. To save preferred driving positions to 1 and 2:
- Turn the vehicle on or to accessory mode. A DIC welcome message may indicate the driver number of the current remote key. See “Identifying Driver Number” previously in this section.
- Adjust all available memory features to the desired driving position.
- Press and release SET; a beep will sound.
- Immediately upon releasing SET, press and hold the memory button 1 or 2 matching the current Driver’s remote key number until two beeps sound. If too much time passes between releasing SET and pressing 1 or 2, the two beeps will not sound indicating memory position was not saved. Repeat Steps 3 and 4 to try again.
- Repeat Steps 1–4 for the other remote key 1 or 2 using the other 1 or 2 memory button.
- It is recommended to save the preferred driving positions to both 1 and 2 if you are the only driver. To save the common exit seating position to B that is used by all drivers for Manually Recalling Seating Positions and Auto Seat Exit Memory Recall features, repeat Steps 1–4 using B, the exit button.
Manually Recalling Seating Positions Press and hold 1, 2, or B buttons until the recall is complete, to recall the positions previously saved to that button. Manual Memory recall movement for 1, 2 or B buttons may be initiated and will complete to the saved memory position if the vehicle is in or out of P (Park). Enabling Automatic Recalls. Seat Entry Memory moves the driver seat to the selected 1 or 2 position when the vehicle is started. Select Settings > VehicleSeating Position > Seat Entry Memory >ON or OFF. See “Auto Seat Entry Memory Recall” later in this section. Seat Exit Memory moves the driver seat. Seat Exit Memory moves the driver seat. Seat Exit Memory moves the driver seat. Seat Exit Memory moves the driver seat. Seat Exit Memory moves the driver to the preferred exit position of the B button when the vehicle is turned off and the door is opened. Select Settings > Vehicle > Seating Position > Seat Exit Memory > ON or OFF. See “Auto Seat Exit Memory Recall” later in this section. Auto Seat Entry Memory Recall Seat Entry Memory will automatically begin a movement to the seating positions of the 1 or 2 button corresponding to the driver’s remote key number 1 or 2 detected by the vehicle when:
- The vehicle is turned ON.
- Seating positions have been previously saved to the same 1 or 2 button. See “Saving Seating Positions” previously in this section.
- Seat Entry Memory is enabled. See “Enabling Automatic Recalls” previously in this section.
- The shift lever is in P (Park).
- Seat Entry Memory Recall will continue if the vehicle is shifted out of P (Park) before reaching the saved memory position.
Rear Seat Reminder
If equipped, the message REAR SEAT REMINDER LOOK IN REAR SEAT displays under certain conditions indicating there may be an item or passenger in the rear seat. Check before exiting the vehicle. This feature will activate when a second-row door is opened while the vehicle is on or up to 10 minutes before the vehicle is turned on. There will be an alert when the vehicle is turned off. The alert does not directly detect objects in the rear seat; instead, under certain conditions, it detects when a rear door is opened and closed, indicating that there may be something in the rear seat. The feature is active only once each time the vehicle is turned on and off and will require reactivation by opening and closing the second-row doors. There may be an alert even when there is nothing in the rear seat; for example, if a child entered the vehicle through the rear door and left the vehicle without the vehicle being shut off. The feature can be turned on or off. Select Settings > Vehicle > Rear Seat Reminder > ON or OFF.
Rear Seat Adjustment
The second-row seats slide forward for more room. To adjust the seat position, lift the lever below the seat cushion and slide the seat forward or backward
Reclining the Seatback
To recline the seatback
- Pull the reclining seatback handle.
- Move the seatback to the desired position, and then release the handle to lock the seatback in place.
- Push and pull on the seatback to make sure it is locked.
Folding the Seatback
Either side of the seatback can be folded for more cargo space. Fold a seatback only when the vehicle is not moving. Caution Folding a rear seat with the seat belts still fastened may cause damage to the seat or the seat belts. Always unbuckle the seat belts and return them to their normal stowed position before folding a rear seat. To fold the seatback:
- Fold the head restraint, if equipped.
- Pull the handle on the side of the seat cushion to unlock it.
- Fold the seatback forward. Repeat the steps to fold the other seatback, if desired.
Driver Side Shown, Passenger Side Similar The rear seatbacks can also be folded forward by pulling the levers on either side of the rear cargo area.
The 2023 Chevrolet Blazer is characterized by its bold and sculpted exterior, blending athleticism with a distinctive urban edge.
The Blazer seeks to provide a compelling driving experience, combining performance and versatility for both city streets and off-road adventures.
The interior of the 2023 Blazer features a tech-forward cockpit, offering the latest in connectivity and infotainment options for a modern driving experience.
The Blazer’s distinctive aesthetic lies in its unique combination of modern design elements, capturing attention with a sense of adventure.
The 2023 Blazer emphasizes performance with features tailored to provide a dynamic and responsive driving experience.
The Blazer is designed to seamlessly transition between urban environments and off-road adventures, making it a versatile choice for various lifestyles.
The 2023 Blazer stands out in the competitive SUV landscape due to its unique blend of style, performance, and versatility.
Yes, the Blazer is equipped with advanced safety features to enhance driver and passenger safety during every journey.
The Blazer is engineered to handle diverse road conditions, providing a reliable and stable performance.
Yes, the Blazer is available in multiple trim levels, allowing customers to choose features and options that align with their preferences.
The Blazer caters to a diverse audience, appealing to those seeking a stylish, performance-oriented SUV for both daily commuting and weekend adventures.
The Blazer successfully merges athleticism with refined comfort, creating a harmonious balance that enhances the overall driving experience.
The Blazer contributes to Chevrolet’s lineup by offering a distinctive SUV option that combines modern design, technology, and performance.
Standout features of the Blazer’s exterior design include its bold lines, sculpted contours, and attention-grabbing aesthetics.
The 2023 Blazer incorporates the latest trends in automotive design by seamlessly blending contemporary styling with functional features and technology.