Chevrolet Bolt EUV 2023 General Information User Guide
For service and parts needs, visit your dealer. You will receive genuine GM parts and GM-trained and supported service people. Genuine GM parts have one of these marks:
California Perchlorate Materials Requirements
Certain types of automotive applications, such as airbag initiators, seat belt pre-tensioners, and lithium batteries contained in electronic keys, may contain perchlorate materials. Perchlorate Material – special handling may apply. See www.dtsc.ca.gov/hazardouswaste/ perchlorate.
Accessories and Modifications
Adding non-dealer accessories or making modifications to the vehicle can affect vehicle performance and safety, including such things as airbags, braking, stability,
ride and handling, emissions systems, aerodynamics, durability, Driver Assistance Systems, and electronic systems like antilock brakes, traction control, and stability control. These accessories or modifications could even cause malfunction or damage not covered by the vehicle warranty. Damage to suspension components caused by modifying vehicle height outside of factory settings will not be covered by the vehicle warranty. Damage to vehicle components resulting from modifications or the installation or use of non-GM-certified parts, including control module or software modifications, is not covered under the terms of the vehicle warranty and may affect the remaining warranty coverage for affected parts. GM Accessories are designed to complement and function with other systems on the vehicle. See your dealer to accessorize the vehicle using genuine GM Accessories installed by a dealer technician. Also, see Adding Equipment to the Airbag-Equipped Vehicle 0 52.
Doing Your Own Service Work
Never try to do your own service on high-voltage battery components. You can be injured and the vehicle can be damaged if you try to do your own service work. Service and repair of these high-voltage battery components should only be performed by a trained dealer technician with the proper knowledge and tools. Exposure to high voltage can cause shock, burns, and even death. The high-voltage components in the vehicle can only be serviced by technicians with special training. High-voltage components are identified by labels. Do not remove, open, take apart, or modify these components. High voltage cable or wiring has an orange covering. Do not probe, tamper with, cut, or modify high-voltage cables or wiring. It can be dangerous to work on your vehicle if you do not have the proper knowledge, service manual, tools, or parts. Always follow the owner’s manual procedures and consult the service manual for your vehicle before doing any service work.
If doing some of your own service work, use the proper service manual. It tells you much more about how to service the vehicle than this manual can. To order the proper service manual, see Publication Ordering Information 0 309. This vehicle has an airbag system. Before attempting to do your own service work, see Servicing the Airbag-Equipped Vehicle 0 52. Keep a record with all parts receipts and list the mileage and the date of any service work performed. See Maintenance Records 0 297.
Components under the hood can get hot during vehicle operation. To help avoid the risk of burning unprotected skin, never touch these components until they have cooled, and always use a glove or towel to avoid direct skin contact. Clear any snow from the hood before opening.
To open the hood:
- Pull the hood release lever with the is symbol. It is on the lower left side of the instrument panel.
- Go to the front of the vehicle and locate the secondary release lever under the front center of the hood. Push the secondary hood release lever to the right to release.
- Lift the hood and release the hood prop rod from its retainer, in the front of the engine compartment. Securely insert the rod end into the slot marked with an
arrow, on the underside of the hood.
To close the hood:
- Before closing the hood, be sure all filler caps are on properly, and all tools are removed.
- Lift the hood and remove the hood prop rod from the underside of the hood. Return the prop rod to its retainer. The prop rod must click into place when returning it to the retainer to prevent hood damage.
- Lower the hood 20 cm (8 in) above the vehicle and release it. Check to make sure the hood is latched completely. Repeat this process with additional force if necessary.
Do not drive the vehicle if the hood is not latched completely. The hood could open fully, block your vision, and cause a crash. You or others could be injured. Always close the hood completely before driving.
Underhood Compartment Overview
- Windshield Washer Fluid Reservoir. See Washer Fluid 0 241.
- Cabin Heating Coolant Reservoir. See Cooling System 0 240.
- High Voltage Battery Coolant Reservoir. See Cooling System 0 240.
- HPDM (High Power Distribution Module). Negative (–) Battery Terminal. See Jump Starting
- North America 0 278.
- APM (Accessory Power Module), OBCM (On-Board Charging Module).
- Brake Fluid Reservoir. See Brake Fluid 0 242.
- SPIM, APM, and Charger Module Coolant Reservoir. See Cooling System 0 240.
- Battery. See Battery – North America 0 243.
- Positive (+) Battery Terminal. See Jump Starting
- North America 0 278.
- Underhood Compartment Fuse Block.
- Underhood Compartment Fuse Block 0 251.
Chevrolet Bolt EUV 2023 Top Accessories
[amalinkspro_table id=”32452″ new-window=”on” nofollow=”on” addtocart=”off” /]
View Full User Guide: Chevrolet Bolt EUV 2023 User
Download Manuals: https://www.chevrolet.com/support/vehicle/manuals-guides