Staff Answer
Jun 22, 2026 - 02:05 PM
-
The 2016 Dodge Charger utilizes a dual-location electrical system to manage its electronic components. Accessing these panels is straightforward once you know where to look:
-
Power Distribution Center (Engine Bay): This is the primary fuse box. Open the hood and locate the large black plastic housing on the passenger side of the engine compartment, near the cowl. Lift the release tabs on the cover to access the fuses and relays. A map of the circuits is printed on the underside of the cover for easy identification.
-
Rear Power Distribution Center (Trunk): The secondary fuse panel is located in the trunk. To access it, open the trunk, lift the floor carpet/cover, and locate the power distribution center cover near the battery.
-
Troubleshooting Tips: When a component fails, inspect the fuse for an interrupted metal filament inside the clear housing. Always replace a blown fuse with one of the identical amperage rating. Using a higher-rated fuse can cause wires to melt or components to short out, creating a significant fire risk.
Safety Note: Always use a plastic fuse puller tool to remove and install fuses to avoid accidental shorting of the terminals. If a fuse continues to blow repeatedly, it indicates a deeper electrical short that requires professional inspection.
👉 https://www.autouserguide.com/dodge/d...
Watch My Tutorial
Add New Comment