Staff Answer
Jun 22, 2026 - 02:51 PM
-
The 2012 Dodge Journey utilizes a Totally Integrated Power Module (TIPM), which serves as the central hub for most electrical circuits.
-
Totally Integrated Power Module (Engine Bay): This is the primary electrical center.
-
Location: Open the hood and locate the module on the driver’s side, positioned near the air cleaner assembly.
-
Access: Release the cover latches and lift the housing. A detailed map of the fuse and relay positions, along with their respective amperage ratings, is printed on the inside of the cover.
-
-
Interior Fuse Panel (Dashboard/Footwell):
-
Location: This panel is located behind the glove box assembly.
-
Access: Open the glove box, remove any items, and disengage the retaining clips (typically found on the sides or top) to lower the glove box completely. The fuse panel will be accessible behind it.
-
-
Identification & Replacement:
-
Inspection: Use the fuse puller tool (found in the engine bay module) to remove a suspect fuse. Check the metal filament; if it is broken or charred, the fuse is blown.
-
Replacement: Only replace a blown fuse with one of the exact same amperage rating. Never use a higher-rated fuse, as it can cause significant electrical damage or fire hazards.
-
Safety Note: Always ensure the ignition is in the OFF position before removing any fuses. If a replacement fuse fails immediately, do not attempt to use a higher-capacity fuse; this indicates an underlying short circuit that requires professional diagnostic service.
👉 https://www.autouserguide.com/dodge/d...
Watch My Tutorial
Add New Comment