Staff Answer
Jul 20, 2026 - 08:43 PM
-
The P0011 code in a Nissan indicates that the Intake Valve Timing (IVT) control solenoid has advanced the intake camshaft timing beyond the position commanded by the Engine Control Module (ECM).
Method 1: Perform Oil and Filter Service
-
Action: Nissan's IVT system is highly dependent on clean, correct-viscosity engine oil pressure. Check your oil level and quality; if the oil is dirty or low, perform a full change. A clogged oil passage or filter is a primary cause of timing control faults in these engines.
Method 2: Inspect the Intake Valve Timing (IVT) Solenoid
-
Action: Locate the IVT control solenoid for Bank 1. Inspect the connector for oil leaks or corrosion. Remove the solenoid and check the fine mesh screen for sludge or metal debris; clean the screen or replace the solenoid if it fails to actuate smoothly during testing.
Method 3: Test Camshaft Position Sensor
-
Action: Verify the integrity of the Bank 1 Intake Camshaft Position Sensor. Use a multimeter to check for stable voltage output and inspect the wiring harness for heat damage or loose pins that could lead to an incorrect "over-advanced" reading by the ECM.
Warning: Prolonged operation with a P0011 code can lead to reduced engine power, poor fuel economy, and potential premature wear on the timing chain and tensioner assembly.
Watch My Tutorial
VIDEO HERE]
Add New Comment