2025 Honda CR-V Displays User Guide
This Guide covers the 2025 Honda CR-V displays, including its modern infotainment system, user-friendly interface, and unique features to improve driving ease and connectivity.
2024 Honda CR-V Review, Specs, Price, Features, Mileage (Brochure)
Gauges and Driver Information Interface
Gauges
Gauges include the speedometer, fuel gauge, and other related indicators. They are displayed when the power mode is in ON.
Speedometer
Displays your driving speed in mph or km/h.
Tachometer
Shows the number of engine revolutions per minute.
Fuel Gauge
Displays the amount of fuel left in the fuel tank.
You can change the Speed/Distance units.
You can turn the tachometer display on or off.
NOTICE
You should refuel when the reading approaches E Running out of fuel can cause the engine to misfire, damaging the catalytic converter.
The actual amount of remaining fuel may differ from the fuel gauge reading.
Odometer
Shows the total number of miles or kilometers that your vehicle has accumulated.
Outside Temperature
Shows the outside temperature in Fahrenheit (U.S.) or Celsius (Canada).
Adjusting the outside temperature display
Adjust the temperature reading by up to ±5°F or ±3°C if the temperature reading seems incorrect.
Traffic Sign Recognition System
Shows certain detected traffic signs while driving.
The indicator blinks when the maximum speed of the traffic sign detected by the Traffic Sign Recognition System is exceeded.
The temperature sensor is in the front bumper. Road heat and exhaust from another vehicle can affect the temperature reading when your vehicle speed is less than 19 mph (30 km/h).
It may take several minutes for the display to be updated after the temperature reading has stabilized.
You can adjust the temperature reading.
Current Mode for ACC with Low Speed Follow, the LKAS, and Traffic Jam Assist
Shows the current mode for ACC with Low Speed Follow, LKAS, and Traffic Jam Assist.
Clock
Shows the clock.
You can adjust the time manually and change the clock display to show the 12 hour clock or 24 hour clock.
Driver Information Interface
The driver information interface shows information such as the estimated travelable distance and fuel economy of the vehicle. It also displays messages such as warnings and other helpful information.
When a warning message displays, please check the message and contact a dealer and have the vehicle inspected if necessary. Please refer to the pages below if the Engine oil pressure low or Engine temperature too hot message is displayed.
Switching the Display
Press the
(home) button, then roll the left selector wheel to scroll to the content you want to see. Press the left selector wheel to see detailed information.
You can add or delete the meter contents.
Range / Fuel / Trip Meter
Roll the left selector wheel to switch between trip meter A and trip meter B.
Trip meter
Shows the total number of miles or kilometers driven since the last reset. Meters A and B can be used to measure two separate trips.
Resetting a trip meter
To reset the trip meter, display it, press the left selector wheel and then select Reset.
Average Fuel Economy
Shows the estimated average fuel economy of each trip meter in mpg or l/100 km. The display is updated at set intervals. When a trip meter is reset, the average fuel economy is also reset.
Instant Fuel Economy
Shows the instant fuel economy as a bar graph in mpg or l/100 km.
Range
Shows the estimated distance you can travel on the remaining fuel. This estimated distance is based on the vehicle’s current fuel economy.
You can change when to reset the average fuel economy.
The driving range displayed is only an estimate and may differ to the actual distance the vehicle can travel.
Speed / Time / Trip Meter
Roll the left selector wheel to switch between trip meter A and trip meter B.
Trip meter
Elapsed time
Shows the time elapsed since Trip A or Trip B was reset.
Average speed
Shows the average speed in mph or km/h since Trip A or Trip B was reset.
Audio
Shows the current audio information.
Phone
Shows the current phone information.
You can change when to reset the elapsed time.
You can change when to reset the average speed.
Navigation
Compass
Shows the compass screen.
Turn-by-Turn Directions
When driving guidance is provided by the Android Auto or Apple CarPlay, turn-by-turn directions to your destination appear.
You can select whether to have the turn-by-turn display come on or not during the route guidance.
Turn-by-turn directions may not be available for all apps.
Driver Attention Monitor
The Driver Attention Monitor analyzes steering inputs to determine if the vehicle is being driven in a manner consistent with drowsy or inattentive driving. If it determines that the vehicle is being driven in such a manner, it will display the degree of the driver’s attention on the driver information interface.
When you select Driver attention on the driver information interface, bars on it light up in white to indicate the degree of the driver’s attention.
The Driver Attention Monitor cannot always detect if the driver is tired or inattentive.
Regardless of the system’s feedback, if you are feeling tired, stop in a safe location and rest for as long as needed. 
If two bars light up, the Driver attention level low message will appear.
If one bar lights up, the Driver attention level low. Time for a break. message will appear, a beep will sound, and the steering wheel will vibrate.
If this message appears, stop in a safe location and rest for as long as needed.
The message will disappear when the left selector wheel is pressed or when the system has determined that the driver is driving normally.
If the driver does not take a break and the monitor continues to detect that the driver is very tired, the message will appear again after approximately 15 minutes, accompanied by a beep and steering wheel vibrations.
The message does not appear when the traveling time is 30 minutes or less.
The Driver Attention Monitor resets when:
- The engine is turned off.
- The driver unfastens the seat belt and opens the door while the vehicle is stopped.
For the Driver Attention Monitor to function:
- The vehicle must be traveling above 25 mph (40 km/h).
- The electric power steering (EPS) system indicator must be off.
Depending on driving conditions or other factors, the Driver Attention Monitor may not function in the following circumstances:
- The steering assist function of the Lane Keeping Assist System (LKAS) is active.
- The condition of the road is poor, e.g., the surface is unpaved or bumpy.
- It is windy.
- The driver is frequently operating the vehicle in an assertive manner such as changing lanes or accelerating.
Customizing
You can change the Driver Attention Monitor settings. Select Tactile and audible alert*1/Tactile And Audible Alert*2, Tactile alert*1/Tactile Alert*2, or OFF.
- Models with 7-in. Color Touchscreen
- Models with 9-in. Color Touchscreen
The bars on the driver information interface remain grayed out unless the Driver Attention Monitor is functioning.
AWD Torque Distribution Monitor
The indicators on the display show the amount of torque being transferred to the right front, left front, right rear, and left rear wheels.
Seat Belts
Occurs, under specified conditions, when seat belts are latched or unlatched.
Maintenance
Shows the remaining oil life and Maintenance MinderTM.
Safety Support
Indicates the status of the Road Departure Mitigation system, CMBSTM, Low Speed Braking Control*, blind spot information system*, and Parking Sensor System*, such as On, Off, or Failure, by color and letters.
The following colors indicate the status of any of the above mentioned systems:
- Green: The system is on.
- Gray: The system is off.
- Amber: There is a problem with the system.
If a system is indicated by the color amber, have your vehicle checked by a dealer immediately.
To turn on or off each system, first rotate the left selector wheel to switch displays. From the next display, you can select which system to turn on or off.
You can also confirm the status of each function by the color of the safety support indicator.
Models with Low Speed Braking Control
Even when the Low Speed Braking Control icon is green, if the Rear Sensor Setting is turned off, the brake assist will not operate when reversing.
Models with Parking Sensor System
Even when the Parking Sensor System icon is green, if the Rear Sensor Setting is turned off, the rear parking sensor will not operate when reversing.
No Content
Speed/Distance Units
Enables you to show another unit on the driver information interface and audio/information screen and set the displayed measurements to read in either miles and mph or km and km/h.
Press and hold the left selector wheel when you select No content on the driver information interface. Each time you do this, the unit will change from miles and mph to km and km/h or vice versa. After this, a confirmation screen will appear for a few seconds.
The tachometer can be turned on and off using the driver information interface or audio/information screen.
Even if you have turned off the tachometer on the driver information interface or audio/information screen, if No content is selected on the driver information interface, it will change to a tachometer-only display.
Brightness
Display the adjustment for instrument panel brightness.
When the power mode is in ON, you can use the left selector wheel to adjust instrument panel brightness.
- Brighten: Roll the left selector wheel up.
- Dim: Roll the left selector wheel down.
Press the left selector wheel to exit.
The brightness of the gauge is automatically adjusted depending on the ambient brightness.
- The brightness dims when the ambient light is dark.
- The brightness brightens when the ambient light is bright.
You can change the setting even when the ambient lighting is bright, but the brightness of the gauge won’t change.
Gauge Display Settings
You can choose which icons to display on the home screen.
- Roll the left selector wheel to scroll to select Gauge display settings, then press the left selector wheel.
- Roll the left selector wheel.
- Roll the left selector wheel to scroll between icons, then press the left selector wheel to check or uncheck them.
Warnings
You can check if there are any active warning messages.
Icons that are gray cannot be removed from the home screen.
When you customize settings, shift to (P).
If there are multiple warnings, you can roll the left selector wheel to see other warnings.
Settings
How to customize
Press the (home) button, then select the 
To customize other features, roll the left selector wheel.
When you customize settings, shift to (P.
List of customizable options
Setup Group Customizable Features Description Selectable Settings
|
Meter setup |
Language selection | Changes the displayed language. | English*1/Français/ Español |
| Adjust outside temp. display | Adjusts the temperature reading by a few degrees. | -5°F ~ ±0°F*1 ~ +5°F
(U.S.) -3°C ~ ±0°C*1 ~ +3°C (Canada) |
|
| “Trip A” reset timing | Changes the setting of how to reset trip meter A, average fuel economy A, average speed A, and elapsed time A. | When fully refueled/
IGN OFF/Manually reset*1 |
|
| “Trip B” reset timing | Changes the setting of how to reset trip meter B, average fuel economy B, average speed B, and elapsed time B. | When fully refueled/
IGN OFF/Manually reset*1 |
|
| Adjust alarm volume | Changes the alarm volume, such as buzzers, warnings, turn signal sound, and so on. | High/Mid*1/Low | |
| Fuel efficiency backlight | Turns the ambient meter feature on and off. | ON*1/OFF | |
| Rear seat reminder | Turns the Rear Seat Reminder feature on and off. | ON*1/OFF | |
| Speed/distance units | Selects the trip meter units. | km/h∙km/mph∙miles*1 (U.S.) km/h∙km*1/mph∙miles (Canada) |
|
| Tachometer | Selects whether the tachometer is displayed on the instrument panel. | ON*1/OFF |
Example of customization settings
The steps for changing the “Trip A” reset timing setting to When fully refueled are shown below. The default setting for “Trip A” reset timing is Manually reset.
- Press the (home) button and roll the left selector wheel to select screen, then press the left selector wheel.
- Roll the left selector wheel until Meter setup appears on the display.
- Press the left selector wheel.
- Roll the left selector wheel until “Trip A” reset timing appears on the display, then press the left selector wheel.
- The display switches to the customization setup screen, where you can select When fully refueled, IGN OFF, Manually reset, or Back.
- Roll the left selector wheel and select When fully refueled, then press the left selector wheel.
- The display will return to the customization menu screen.
- The display will return to the customization menu screen.
- Press the left selector wheel after Back appears on the display.
Repeat Step 6 until you return to the normal screen.