Honda Civic Hatchback 2022 Seat Belts User Manual

Honda Civic Hatchback 2022 Seat Belts User Manual

Seat Belts

Appears when any of the seat belts are latched or unlatched.

Maintenance

Shows the remaining oil life and Maintenance Minder TM.
Maintenance Minder TM P. 635

Safety Support

Indicates the state of the Road Departure Mitigation system, CMBSTM, and blind spot information system* such as On, Off, or Failure, by color and letters.
The following colors indicate the state of any of the above-mentioned systems:

• Green: The system is on.
• Gray: The system is off.
• Amber: There is a problem with the system.

If a system is indicated by the color amber, have your vehicle checked by a dealer immediately.
To turn on or off each system, first rotate the left selector wheel to switch displays. From the next display you can select which system to turn on or off.

Road Departure Mitigation system On and Off P. 587
Blind Spot Information System On and Off P. 493
CMBSTM On and Off P. 503

You can also confirm the state of each function by the color of the safety support indicator. Safety Support Indicator (Amber) P. 109 2 Safety Support Indicator (Green/Gray) P. 111

Customize Display

Change the settings to your liking.

• Arrange content
  You can choose which icons to display on the home screen.

1. Roll the left selector wheel to scroll to select Customize display, then press the left selector wheel.
2. Roll the left selector wheel.
3. Roll the left selector wheel to scroll between icons, then press the left selector wheel to check or uncheck them.

Icons that are gray cannot be removed from the home screen.

Continuously variable transmission models
When you customize settings, shift to (P.

Manual transmission models
When you customize settings, set the parking brake.

Speed/Distance Units

Enables you to show another unit on the driver information interface and set the displayed measurements to read in either miles and km, mph and km/h.
Press and hold the left selector wheel when you select No content on the driver information interface. Each time you do this, the unit will change from miles and mph to km and km/h or vice versa. After this, a confirmation screen will appear for a few seconds.

Warnings
You can check if there are any active warning messages.

If there are multiple warnings, you can roll the left selector wheel to see other warnings.

Settings
Use the driver information interface to customize certain features.

How to customize
Press the  (home) button, then select the Settings screen by rolling the left selector wheel while the power mode is in ON, the vehicle is at a complete stop, and the shift position is in (P (continuously variable transmission) or the parking brake is set (manual transmission). Then, press the left selector wheel.

To customize other features, roll the left selector wheel.
List of customizable options P. 130
Example of customization settings P. 136

Continuously variable transmission models
When you customize settings,

Manual transmission models
When you customize settings, set the parking brake.

List of customizable options

Meter setup	Language selection	Changes the displayed language.	English*1/Français/ Español
	Adjust outside temp. display	Adjusts the temperature reading by a few degrees.	-5°F ~ ±0°F*1 ~ +5°F (U.S.) -3°C ~ ±0°C*1 ~ +3°C (Canada)
	“Trip A” reset timing	Changes the setting of how to reset trip meter A, average fuel economy A, average speed A, and elapsed time A.	When fully refueled/ IGN OFF/Manually reset*1
	“Trip B” reset timing	Changes the setting of how to reset trip meter B, average fuel economy B, average speed B, and elapsed time B.	When fully refueled/ IGN OFF/Manually reset*1
	Adjust alarm volume	Changes the alarm volume, such as buzzers, warnings, turn signal sound, and so on.	High/Mid*1/Low
	Fuel efficiency backlight	Turns the ambient meter feature on and off.	ON*1/OFF
	Rear seat reminder	Turns the Rear Seat Reminder feature on and off.	ON*1/OFF
	Speed/distance units	Selects the trip meter units.	km/h∙km/mph∙miles*1 (U.S.) km/h∙km*1/mph∙miles (Canada)
	Tachometer	Selects whether the tachometer is displayed on the instrument panel.	ON*1/OFF

Lighting setup	Auto high-beam	Turns the auto high-beam on and off.	ON*1/OFF
	Interior light dimming time	Changes the length of time the interior lights stay on after you close the doors.	60sec/30sec*1/15sec
	Headlight auto off timer	Changes the length of time the exterior lights stay on after you close the driver’s door.	60sec/30sec/15sec*1/0sec
	Auto light sensitivity*	Changes the timing for the headlights to come on.	Max/High/Mid*1/Low/Min
	Auto headlight ON with wiper ON	Changes the settings for the wiper operation when the headlights automatically come on while the headlight switch is in the AUTO position.	ON*1/OFF

 

Example of customization settings
The steps for changing the “Trip A” reset timing setting to When fully refueled are shown below. The default setting for “Trip A” reset timing is Manually reset.

1. Press the(home) button to select Settings, then press the left selector wheel.
2. Roll the left selector wheel until Meter setup appears on the display.
3. Press the left selector wheel.
   • Language selection appears first in the display.
4. Roll the left selector wheel until “Trip A” reset timing appears on the display, then press the left selector wheel.
   • The display switches to the customization setup screen, where you can select When fully refueled, IGN OFF, Manually reset, or Back.
5. Roll the left selector wheel and select When fully refueled, then press the left selector wheel.
   • The Selected appears, then the display returns to the customization menu screen.
6. Press the left selector wheel after Back appears on the display.
7. Repeat Step 6 until you return to the normal screen.

Honda Civic 2023 Top Accessories

[amalinkspro_table id=”32452″ new-window=”on” nofollow=”on” addtocart=”off” /]

Reference Links

View Full User Guide: Honda Civic Hatchback 2022 User Manual

Download Manuals: https://owners.honda.com/vehicle-information/manuals