2022 Kia Telluride User Guide

Kia-Logo

Table of Contents

Kia Telluride 2022 User Guide

The Kia Telluride 2022 is a mid-size SUV with a roomy, high-quality interior, modern safety features, and a good driving experience. The Telluride stands out with its bold design, cosy cabin, and wide range of features. It was made for both families and people who like to go on adventures. The Telluride 2022 is built with a rugged and eye-catching appearance. It looks strong and confident on the road, with a bold front grille, sleek LED headlights, and strong lines that give it a powerful look. There are different trim levels of the SUV, and each one has its own style and features to suit different tastes. The Telluride’s bedroom is roomy and well-equipped. It has plenty of space and headroom in all three rows, so up to eight people can sit in comfort. The seats are supportive and comfortable, so going on both short and long trips will be a pleasure. The Telluride also has a lot of cargo room, and you can make it even bigger by folding down the back seats. The engine in the Telluride 2022 is powerful and efficient. It usually has a 3.8-liter V6 engine that gives it enough power for daily driving and going on the highway. The engine is paired with an automatic gearbox with eight speeds that makes shifting smooth and quick. All-wheel drive is also an option for the Telluride, which improves traction and stability in different driving situations.

Fuel requirements

For the optimal engine performance, we recommend you use unleaded gasoline which has an octane rating of RON (Research Octane Number) 95/AKI (Anti Knock Index) 91 or higher.
Using Unleaded gasoline with an octane rating lower than RON 95 could result in loss of engine power and increase in fuel consumption.
Your new vehicle is designed to obtain maximum performance with UNLEADED FUEL, as well as minimize exhaust emissions and spark plug fouling.
Never add any fuel system cleaning agents to the fuel tank other than what has been specified. (Consult an authorized Kia dealer for details.)

  • Tighten the cap until it clicks onetime, otherwise the Check Engine light will illuminate.

WARNING
Refueling

  • Do not “top off” after the nozzle automatically shuts off. Attempts to force more fuel into the tank can cause fuel overflow onto you and the ground causing a risk of fire.
  • Always check that the fuel cap is installed securely to prevent fuel spillage, especially in the event of an accident.

Gasoline containing alcohol and methanol

Gasohol, a mixture of gasoline and ethanol (also known as grain alcohol), and gasoline or gasohol containing methanol (also known as wood alcohol) are being marketed along with or instead of leaded or unleaded gasoline.
Pursuant to EPA regulations, ethanol may be used in your vehicle.
Do not use gasohol containing more than 15% ethanol, and do not use gasoline or gasohol containing any methanol. Ethanol provides less energy than gasoline and it attracts water, and it is thus likely to reduce your fuel efficiency and could lower your MPG results.

Methanol may cause drivability problems and damage to the fuel system, engine control system and emission control system.
Discontinue using gasohol of any kind if drivability problems occur. Vehicle damage or drivability problems may not be covered by the manufacturer’s warranty if they result from the use of:

  1. Gasoline or gasohol containing methanol.
  2. Leaded fuel or leaded gasohol.
  3. Gasohol containing more than 15% ethanol.

“E85” fuel is an alternative fuel comprised of 85 percent ethanol and 15 percent gasoline, and is manufactured exclusively for use in Flexible Fuel Vehicles. E85 is not compatible with your vehicle. Use of E85may result in poor engine performance and damage to your vehicle’s engine and fuel system. Kia recommends that customers do not use fuel with an ethanol content exceeding 15%.

NOTICE
Your New Vehicle Limited Warranty does not cover damage to the fuel system or any performance problems caused by the use of E85fuel.

NOTICE
Never use any fuel containing methanol. Discontinue use of any methanol containing product which may inhibit proper drivability.

Other fuels
Using fuels that contain Silicone (Si), MMT (Manganese, Mn), Ferrocene (Fe), and Other metallic additives, may cause vehicle and engine dam-age or cause misfiring, poor acceleration, engine stalling, catalyst melting, clogging, abnormal corrosion, life cycle reduction, etc.
Also, the Malfunction Indicator Lamp (MIL) may illuminate.

NOTICE
Damage to the fuel system or performance problem caused by the use of these fuels may not be covered by your New Vehicle Limited Warranty.

Gasoline containing MMT
Some gasoline contains harmful manganese- based fuel additives Such as MMT(Methylcyclopentadienyl Manganese Tricarbonyl). Kia does not recommend the use of gasoline containing MMT. This type of fuel can reduce vehicle performance and affect your emission control system. The Malfunction Indicator Lamp on the cluster may come on.

Do not use methanol
Fuels containing methanol (wood alcohol) should not be used in your vehicle. This type of fuel can reduce vehicle performance and damage components of the fuel system, engine control system and emission control system.

Fuel Additives
Kia recommends that you use good quality gasolines treated with detergent additives such as TOP TIER Detergent Gasoline, which help prevent deposit formation in the engine. These gasolines will help the engine run cleaner and enhance performance of the Emission Control System. For more information on TOP TIER Detergent Gasoline, please go to the website (www.top-tiergas.com)
For customers who do not use TOP TIER Detergent Gasoline regularly, and have problems starting or the engine does not run smoothly, additives that you can buy separately may be added to the gasoline.
If TOP TIER Detergent Gasoline is not available, one bottle of additive should be added to the fuel tank at every 8,000 miles (13,000 km) (for Smartstream G2.5 T-GDi), 6,000 miles (10,000 km) (for (Gasoline) 3.3 T-GDi) or every engine oil change is recommended. Additives are available from your authorized Kia dealer along with information on how to use them. Do not mix other additives.

Operation in foreign countries
If you are going to drive your vehicle in another country, be sure to:

  • Observe all regulations regarding registration and insurance.
  • Determine that acceptable fuel is available.

Vehicle modifications

This vehicle should not be modified. Modification of your vehicle could affect its performance, safety or durability and may even violate governmental safety and emissions regulations.
In addition, damage or performance problems resulting from any modification may not be covered under warranty.

  • This vehicle should not be modified. Modification of your vehicle could affect its performance, safety or durability and may even violate governmental safety and emissions regulations.
    In addition, damage or performance problems resulting from any modification may not be covered under warranty.
  •  If you use unauthorized electronic devices, it may cause the vehicle to operate abnormally, wire damage, battery discharge and fire. For your safety, do not use unauthorized electronic devices.

Read all Instructions for Introduction User Guide

Kia Telluride 2022 Important Safety Precautions and Seat Belts User Guide

2022 Kia Telluride Safety Precautions and Seat Belts Instructions

Important Safety Precautions

You will find many safety precautions and recommendations throughout this section, and throughout this manual. The safety precautions in this section are among the most important.

Always Wear Your Seat Belt

A seat belt is your best protection in all types of accidents. Air bags are designed to supplement seat belts, not replace them. So even though your vehicle is equipped with air bags, ALWAYS make sure you and your passengers wear your seat belts, and wear them properly.

Restrain All Children

All children under age 13 should ride in your vehicle properly restrained in a rear seat, not the front seat. Infants and small children should be restrained in an appropriate child restraint. Larger children should use a booster seat with the lap/shoulder belt until they can use the seat belt properly without a booster seat.

Air Bag Hazards

While air bags can save lives, they can also cause serious or fatal injuries to occupants who sit too close to them, or who are not properly restrained. Infants, young children, and shorter adults are at the greatest risk of being injured by an inflating air bag. Follow all instructions and warnings in this manual.

Driver Distraction

Driver distraction presents a serious and potentially deadly danger, especially for inexperienced drivers. Safety should be the first concern when behind the wheel and drivers need to be aware of the wide array of potential distractions, such as drowsiness, reaching for objects, eating, personal grooming, other passengers, and using cellular phones.
Drivers can become distracted when they take their eyes and attention off the road or their hands off the wheel to focus on activities other than driving. To reduce your risk of distraction or getting into an accident:

  •  ALWAYS set up your mobile devices (i.e., MP3 players, phones, navigation units, etc.) when your vehicle is parked or safely stopped.
  • ONLY use your mobile device when allowed by laws and when conditions permit safe use. NEVER text or email while driving. Most states have laws prohibiting drivers from texting. Some states and cities also prohibit drivers from using handheld phones.
  •  NEVER let the use of a mobile device distract you from driving. You have a responsibility to your passengers and others on the road to always drive safely, with your hands on the wheel as well as your eyes and attention on the road.

Control Your Speed

Excessive speed is a major factor in crash injuries and deaths. Generally, the higher the speed, the greater the risk, but serious injuries can also occur at lower speeds. Never drive faster than is safe for current conditions, regardless of the maximum speed posted.

Kia Telluride 2022 Seat Belts User Guide

Seat belts

Seat belts are designed to bear upon the bony structure of the body, and should be worn low across the front of the pelvis, chest and shoulders.

Seat belt restraint system

For maximum restraint system protection, the seat belts must always be used whenever the vehicle is moving.

  • A properly positioned shoulder belt should be positioned midway over your shoulder across your collarbone.
  •  Never allow children to ride in the front passenger seat. See “Child Restraint System (CRS)”

WARNING
Twisted seat belt
Make sure your seat belt is not twisted when worn. A twisted seat belt may not properly protect you in an accident and could even cut into your body.

Read all Instructions for Important Safety Precautions and Seat Belts User Guide

Kia Telluride 2022 Child Restraint System (CRS) User Guide

2022 Kia Telluride Child Restraint System (CRS) Guidelines

Child Restraint System (CRS)

Infants and younger children must be restrained in an appropriate rear-facing or forward-facing Child Restraint System (CRS) that has first been properly secured to the rear seat of the vehicle. Please refer to your state or federal laws for child seating requirements in the operation of a motor vehicle.

Children always in the rear

Children under age 13 must always ride in the rear seats and must always be properly restrained to minimize the risk of injury in an accident, sudden stop or sudden maneuver.

WARNING
Restraint Location
Never install a child or infant seat on the front passenger’s seat. A child riding in the front passenger seat can be forcefully struck by an inflating airbag and seriously injured.

WARNING
Hot Child Restraint
A Child Restraint System can become very hot if it is left in a closed vehicle on a sunny day. Be sure to check the seat cover, buckles and latches before placing a child in the restraint system.

According to accident statistics, children are safer when properly restrained in the rear seats than in the front seat. Even with air bags, children can be seriously injured or killed. Children too large for a child restraint must use the seat belts provided.
All 50 states have child restraint laws which require children to travel in approved child restraint devices. The laws governing the age or height/weight restrictions at which seat belts can be used instead of child restraints differs among states, so you should be aware of the specific requirements in your state, and where you are travelling.
The CRS must be properly placed and installed in the rear seat. You must use a commercially available CRS that meets the requirements of the Federal Motor Vehicle Safety Standards (FMVSS).
A CRS is generally designed to be secured in a vehicle seat by lap belt portion of a lap/shoulder belt, or by a LATCH system in the rear seats of the vehicle.

Child Restraint System (CRS)
Infants and younger children must be restrained in an appropriate rear-facing or forward-facing CRS that has first been properly secured to the rear seat of the vehicle. Read and comply with the instructions for installation and use provided by the manufacturer of the CRS.

WARNING
Child Restraint Installation
An improperly secured child restraint can increase the risk of serious injury or death in an accident. Always take the following precautions when using a Child Restraint System:

  • Always follow the Child Restraint System manufacturer’s instructions for installation and use. 􀀁 Always properly restrain your child in the child restraint.
  • If the vehicle head restraint prevents proper installation of a child seat (as described in the Child Restraint System manual), the head restraint of the respective seating position shall be readjusted or entirely removed.
  • Do not use an infant carrier or a child safety seat that “hooks” over a seatback as it may not provide adequate protection in an accident.
  • Be especially careful when installing a child restraint on the center seating position in the second row as it is narrow- er than the outboard positions. A wide child restraint installed on the center seat may cover the safety belt buckles for the other seating positions. Do not allow someone to ride in a seating position where the safety belt buckle is covered by a child restraint.
  • A child restraint in the center seating position may also contact or push up against the safety belt buckles, which can damage the buckles and make them unusable or unsafe. Always check that the child restraint does not contact any of the safety belt buckles. Check the placement of the child restraint regularly to make sure that it has not shifted and come into contact with any of the safety belt buckles.

NOTICE
After an accident, have a Kia dealer check the Child Restraint System, seat belts, tether anchors and lower anchors.

Selecting a CRS

When selecting a CRS for your child, always:

  • Make sure the CRS has a label certifying that it meets applicable Federal Motor Vehicle Safety Standards (FMVSS 213).
  • Select a child restraint based on your child’s height and weight. The required label or the instructions for use typically provide this information.
  • Select a child restraint that fits the vehicle seating position where it will be used.
  • Read and comply with the warnings and instructions for installation and use provided with the CRS.

WARNING
Holding Children
Never hold a child in your arms or lap when riding in a vehicle. The violent forces created during a crash will tear the child from your arms and throw the child against the car’s interior. Always use a Child Restraint System that is appropriate for your child’s height and weight.

WARNING
Unattended Children
Never leave children unattended in a vehicle. The car can heat up very quickly, resulting in injuries to the child in the vehicle.

WARNING
Seat Belt Use
Do not use one seat belt for two occupants at the same time. This will eliminate any safety benefits provided by the seat belt to the occupants.

CRS types
There are three main types of CRS: rear-facing seats, forward-facing seats, and booster seats. They are classified according to the child’s age, height, and weight.

Read all Instructions for Child Restraint System (CRS) User Guide

Kia Telluride 2022 Air Bag – Advanced Supplemental Restraint System User Guide

2022 Kia Telluride Air Bag Supplemental Restraint System

Air Bag – Advanced Supplemental Restraint System

Kia-Telluride-2022 Air-Bag - Advanced-Supplemental-Restraint-System-User Guide-01

* The actual air bags in the vehicle may differ from the illustration.

  1. Driver’s front airbag
  2. Passenger’s front airbag
  3. Side airbag
  4. Curtain airbag
  5. Driver’s knee airbag

Even in vehicles with air bags, you and your passengers must always wear the safety belts provided in order to minimize the risk and severity of injury in the event of a collision or rollover.

How does the air bag system operate?

  • Air bags are activated (able to inflate if necessary) only when the ENGINE START/STOP button has been turned to the ON position.
  • The appropriate airbags inflate instantly in the event of a serious frontal collision or side collision in order to help protect the occupants from serious physical injury.
  • There is no single speed at which the airbags will inflate. Generally, airbags are designed to inflate based upon the severity of a collision and its direction, etc. Several factors determine whether the sensors produce an electronic deployment/inflation signal.
  • Airbags will not deploy in every crash or collision situation. Air bag deployment depends on a number of factors including vehicle speed, angles of impact, and, the density and stiffness of the vehicles or objects which your vehicle hits in the collision. The determining factors are not limited to those mentioned above.
  • The front airbags will completely inflate and deflate in an instant. It is virtually impossible for you to see air bags inflate during an accident. It is much more likely that you will simply see the deflated airbags hanging out of their storage compartments after the collision.
  • In addition to inflating in serious side collisions, side and/or curtain airbags will inflate if the sensing system detects a rollover.
  • When a rollover is detected, side and/or curtain airbags will remain inflated longer. This helps provide protection from ejection, especially when used in conjunction with the seat belts.
  • In order to help provide protection, the air bags must inflate rapidly. The airbag inflates extremely fast between the occupant and the vehicle structures before the occupant impacts the vehicle structures. This speed of inflation reduces the risk of serious or life-threatening injuries and is thus a necessary part of the air bag design. However, airbag inflation can also cause injuries which can include fascial abrasions, bruises and bro-ken bones. This is because the rapid inflation also causes the air-bags to expand with a great deal of force.
  • There are even circumstances under which contact with the steering wheel or passenger air bag can cause fatal injuries, especially if the occupant is positioned excessively close to the steering wheel or passenger air bag.

WARNING
Airbag Inflation
Sit as far back as possible from the steering wheel while still maintaining comfortable control of the vehicle. A distance of at least 10 inches (25 cm) from your chest to the steering wheel is recommended. Failure to do so can result in airbag inflation injuries to the driver.

Noise and Smoke
When inflated, the air bags make a loud noise and leave smoke and powder in the air inside the vehicle. This is normal and is a result of the ignition of the air bag inflator. After the air bag inflates, you may feel substantial discomfort in breathing due to the contact of your chest with both the seat belt and the air bag, as well as from breathing the smoke and powder. Open your doors and/or windows as soon as possible after impact in order to reduce dis-comfort and prevent prolonged exposure to the smoke and powder.
Though smoke and powder are non-toxic, it may cause irritation to the skin (eyes, nose and throat, etc.). If this is the case, wash and rinse with cold water immediately and consult a doctor if the symptom persists.

WARNING
Hot Components
Do not touch the air bag storage area’s internal components immediately after airbag inflation. The air bag related parts in the steering wheel, instrument panel and the roof rails above the front and rear doors are very hot. Hot components can result in burn injuries.

WARNING

Do not install or place any accessories near air bag deployment areas, such as the instrument panel, windows, pillars, and roof rails.

Do not install a child restraint on the front passenger’s seat

Never place a rear-facing child restraint in the front passenger’s seat.

Kia-Telluride-2022 Air-Bag - Advanced-Supplemental-Restraint-System-User Guide-02

Read all Instructions for Air Bag – Advanced Supplemental Restraint System User Guide

Kia Telluride 2022 Smart Key and Theft-Alarm System User Guide

2022 Kia Telluride Using Smart Key and Theft-Alarm System

Smart key

The mechanical key and various remote functions are integrated into the smart key for convenience to the driver.
Record your key number

Kia-Telluride 2022-Smart-Key-and-Theft-Alarm-System-User-Guide-01

attached to the key set. Should you lose your keys, this number will enable an authorized Kia dealer to duplicate the keys easily. Remove the bar code tag and store it in a safe place. Also, record the code number and keep it in a safe and handy place, but not in the vehicle.

Smart key function
To remove the mechanical key, press and hold the release button (1) and remove the mechanical key (2).

Kia-Telluride 2022-Smart-Key-and-Theft-Alarm-System-User-Guide-02

To reinstall the mechanical key, put the key into the hole and push it until a click sound is heard.
With a smart key, you can lock or unlock a door (and liftgate). Refer to the following for more details.

WARNING
Smart key
Never leave the keys in your vehicle with unsupervised children. Leaving children unattended in a vehicle with the smart key is dangerous even if the ENGINE START/STOP button is not in the ACC or ON position. Children copy adults and they could press the ENGINE START/STOP button. The key would enable children to operate power windows or other controls, or even make the vehicle move, which could result in serious bodily injury or death.

Locking

Kia-Telluride 2022-Smart-Key-and-Theft-Alarm-System-User-Guide-02

Pressing the button of the front outside door handles with all doors (and liftgate) closed and any door unlocked, locks all the doors (and liftgate).
The hazard warning lights will blink once to indicate that all doors (and liftgate) are locked. The button will only operate when the smart key is within 28~40 inches (0.7~1 m) from the outside door handle. If you want to make sure that a door has locked or not, you should check the door lock button inside the vehicle or pull the outside door handle.
In some instances, when the outside door button is pressed the doors will not lock and an audible chime will sound if any of the following occurs:

  • The smart key is in the vehicle.
  •  The ENGINE START/STOP button is in the ACC or ON position.
  •  Any door except the liftgate is opened.

Unlocking
Pressing the button of the front outside door handles, with all doors (and liftgate) closed and locked, unlocks all the doors (and liftgate). The hazard warning lights will blink twice to indicate that all doors (and liftgate) are unlocked. The button will only operate when the smart key is within 28~40 inches (0.7~1 m) from the outside door handle. When the 2-press unlock function is activated:

  •  If you press the Door Unlock button (2) on the smart key, the driver’s door will unlock.
  •  If you press the Door Unlock button (2) on the smart key within four seconds again, then all the doors will unlock.
  •  If you press the driver’s outside
    door handle button, the driver’s door will unlock.
  •  If you press the driver’s outside door handle button within four seconds again, then all the doors will unlock.

NOTICE
You can activate or deactivate the 2-press unlock function. Refer to “User Settings mode” 

Liftgate unlocking
If you are within 28~40 inches (0.7~1 m) from the outside liftgate handle, with your smart key in possession, the liftgate will unlock and open when you press the liftgate handle switch.
The hazard warning lights will blink twice to indicate that the liftgate is unlocked.
Also, once the liftgate is opened and then closed, the liftgate will lock automatically.

Kia-Telluride 2022-Smart-Key-and-Theft-Alarm-System-User-Guide-04

Lock (1)
All doors are locked if the lock button is pressed. If all doors are closed, the hazard warning lights will blink and the chime will sound once to indicate that all doors are locked. Also, if the lock button is pressed once more within 4 seconds, the hazard warning lights will blink and the chime will sound once to confirm that the door is locked.
However, if any door remains open, the hazard warning lights (and/or the chime) will not operate. But if all doors are closed after the lock button is pressed, the hazard warning lights will blink once.

Unlock (2)
The driver’s door is unlocked if the unlock button is pressed once. The hazard warning lights will blink twice and the chime will sound twice to indicate that the driver’s door is unlocked.
All doors are unlocked if the unlock button is pressed once more within 4 seconds. The hazard warning lights will blink (for the smart key, the chime also sounds) twice again to indicate that all doors are unlocked. After pressing this button, the doors will lock automatically unless you open any door within 30 seconds. If you attempt to lock or unlock the door by pressing the door lock/unlock button in any of the following situations, the door will not be locked or unlocked.

  • When you want to lock or unlock the door in the ACC or ON state.
  • When you want to lock a door in a car with one or more doors open. Depending on the vehicle, the driver can turn off or set the 2-press unlock setting function.

NOTICE
If the keyless entry system is inoperative due to exposure to water or liquids, it will not be covered by your manufacturer’s vehicle warranty.

Read all Instructions for Smart Key and Theft-Alarm System User Guide

Kia Telluride 2022 Door Locks User Guide

2022 Kia Telluride Door Locks | How To Use

Door locks

Get to know how to use the door lock so that you can lock or unlock the door if necessary.

Operating door locks from outside the vehicle

Kia-Telluride-2022-Door-Locks-User-Guide-01

  1. Pull out the door handle.
  2. Press the lever (1) located inside the bottom part of the cover with a key or flat-head screwdriver.
  3. Push out the cover (2) while pressing the lever.
  4. Turn the key toward the rear of the vehicle to unlock (A) and toward the front of the vehicle to lock (B).
  • If you lock the driver’s door with a key, only the driver’s door will lock/unlock.
  • From the driver’s door, turn the key toward the rear of the vehicle once to unlock the driver’s door and once more within 4 seconds to unlock all doors.
  • Doors can also be locked and unlocked with the smart key.
  • Once the doors are unlocked, they may be opened by pulling the door handle.
  •  When closing the door, push the door by hand. Make sure the doors are closed securely.
  •  Before pulling the outside door handle, remove the key to avoid damaging the paintwork.

NOTICE

  •  In cold and wet climates, door lock and door mechanisms may not work properly due to freezing conditions.
  •  If the door is locked/unlocked multiple times in rapid succession with either the vehicle key or door lock switch, the system may stop operating temporarily in order to protect the circuit and prevent damage to system components.

WARNING

  • Securely close your door before you begin driving. Failure to fully close your door may cause it to open during vehicle operation.
  • Keep your body out of the way of the closing door to prevent injuries.

WARNING
If adult passengers must remain in the vehicle while it is very hot or cold outside, there is risk of injuries or danger to life. Do not lock the vehicle from the outside when there are adult passengers in the vehicle.

CAUTION
Do not unnecessarily open and close the door repeatedly or with excessive force. Such action can damage the vehicle door.

NOTICE
Always place the ENGINE START/STOP button in the OFF position, engage the parking brake, close all windows, and lock all doors when leaving your vehicle unattended.

Operating door locks from inside the vehicle

You can operate door locks with the door lock button or central door lock switch.

With the door lock button

Kia-Telluride-2022-Door-Locks-User-Guide-02

 

  • To unlock a door, push the door  lock button (1) to the “Unlock” position. The red mark on the door lock button will be visible.
  •  To lock a door, push the door lock button (1) to the “Lock” position. If the door is locked properly, the red mark on the door lock button will not be visible.
  •  To open a door, pull the door handle (2) outward.
  •  If the inner door handle of the driver’s (or front passenger’s) door is pulled when the door lock button is in the lock position, the button will unlock and the door will open.
  •  Doors cannot be locked if the smart key is in the vehicle and/or door is open.

Read all Instructions for Door Locks User Guide

Kia Telluride 2022 Manual Liftgate and Power Liftgate User Guide

2022 Kia Telluride Manual Liftgate and Power Liftgate Instruction

Manual liftgate

When you open the liftgate, you will see a space where you can load the cargo.

Opening the manual liftgate

The liftgate is locked or unlocked when all doors are locked or unlocked with the key, smart key or central door lock/unlock switch.

CAUTION
Liftgate lift
Make certain that you close the lift-gate before driving your vehicle. Possible damage may occur to the liftgate gas lifters and attached hardware if the liftgate is not closed prior to driving.

Kia-Telluride-2022-Manual-Liftgate-and-Power-Liftgate-User-Guide-01

  •  Only the liftgate is unlocked if the liftgate unlock button on the transmitter or smart key is pressed for approximately 1 second.
  •  If unlocked, the liftgate can be opened by pressing the handle and pulling it up.
  • Once the liftgate is opened and then closed, the liftgate locks automatically. (All doors must be locked.)

NOTICE
In cold and wet climates, door lock and door mechanisms may not work properly due to freezing conditions.

WARNING
The liftgate swings upward. Make sure no objects or people are near the rear of the vehicle when opening the liftgate.

Closing the manual liftgate

Lower and push down the liftgate firmly. Make sure that the liftgate is securely latched.

Kia-Telluride-2022-Manual-Liftgate-and-Power-Liftgate-User-Guide-02

Make sure your hands, feet and other parts of your body are safely out of the way before closing the liftgate.

WARNING
Exhaust Fumes
The liftgate should always be kept completely closed while the vehicle is in motion. If it is left open or ajar, poisonous exhaust gases may enter the car and serious illness or death may result.

Opening the manual liftgate in emergency

Your vehicle is equipped with the emergency liftgate safety release lever located on the bottom of the liftgate. When someone is inadvertently locked in the luggage compartment.

Kia-Telluride-2022-Manual-Liftgate-and-Power-Liftgate-User-Guide-03

The liftgate can be opened by doing as follows:

  1.  Input the mechanical key into the hole.
  2. Push the mechanical key to the right (1).
  3. Push the liftgate upwards.

 WARNING

  • No one should be allowed to  occupy the cargo area of the vehicle at any time. The cargo area is a very dangerous location in the event of a crash.
  •  Use the release lever for emergencies only. Use with extreme caution, especially while the vehicle is in motion.

CAUTION
Make sure there are no people or objects around the liftgate before opening or closing the liftgate. Wait until the liftgate is open fully and stopped before loading or unloading cargo from the vehicle.

WARNING
Do not grasp the part supporting the liftgate (gas lifter), as this may cause serious injury.

Kia-Telluride-2022-Manual-Liftgate-and-Power-Liftgate-User-Guide-04

Power liftgate

When you open the liftgate, you will see a space where you can load the cargo.

Kia-Telluride-2022-Manual-Liftgate-and-Power-Liftgate-User-Guide-05 Kia-Telluride-2022-Manual-Liftgate-and-Power-Liftgate-User-Guide-06 Kia-Telluride-2022-Manual-Liftgate-and-Power-Liftgate-User-Guide-07

Kia-Telluride-2022-Manual-Liftgate-and-Power-Liftgate-User-Guide-08

  1. Power liftgate open/close button
  2. Power liftgate handle switch
  3. Power liftgate close button
  4. Power liftgate open/close button

NOTICE
If ENGINE START/STOP button is in the ON position, the power liftgate can operate when the shift lever is in P (Park).

Read all Instructions for Manual Liftgate and Power Liftgate User Guide

Kia Telluride 2022 Smart Power Liftgate, Windows and Hood User Guide

2022 Kia Telluride Smart Power Liftgate, Windows and Hood Guidelines

Smart Power Liftgate

On a vehicle equipped with a smart key, the liftgate can be opened using the Smart Power Liftgate system.

Using the smart power liftgate

The liftgate can be opened with no-touch activation when all of the below conditions have been satisfied.

  • 15 seconds have passed after all doors have been closed and locked.
  • The smart key is positioned  within the detecting area for more than 3 seconds.

NOTICE

  •  The Smart Power Liftgate does  not operate when:
    • The smart key is detected within 15 seconds after the doors are closed and locked, and is continuously detected.
    •  The smart key is detected within 15 seconds after the doors are closed and locked, and within 60 inches (1.5 m) from the front door handles.(for vehicles equipped with Welcome Light)
    • A door is not locked or closed.
    • The smart key is in the vehicle.

To activate the Smart Power Lift-gate

  1. Press the MODE button ( ) several times on the steering wheel until ‘User Settings’ menu appears on the LCD.
  2. Select ‘Door → Smart Power Lift-gate’ with the MOVE switch ( / ) and the OK button on the steering wheel.
    For more information, refer to “LCD display”

smart-power-02

Detect and Alert
If you are in the detecting area (20~39 inches (50~100 cm) behind the vehicle) carrying a smart key, the hazard warning lights will blink and the chime will sound for about 3 seconds. This alerts you that the smart key has been detected and the liftgate will open.

NOTICE
Do not approach the detecting area if you do not want the liftgate to open. If you have unintentionally entered the detecting area and the hazard warning lights and chime starts to operate, leave the detect-ing area with the smart key. The liftgate will stay closed.

Automatic opening

smart-power-03

The hazard warning lights will blink and chime will sound 2 times and then the liftgate will open.
Make sure you close the liftgate before driving your vehicle.

Make sure there are no people or objects around the liftgate before opening or closing the liftgate. Make sure objects in the liftgate do not come out when opening the liftgate on a slope. It may cause serious injury. Make sure to deactivate the Smart Power Liftgate when wash-ing your vehicle. Otherwise, the lift-gate may open inadvertently. The key should be kept out of reach of children. Children may inadvertently open the Smart Power Liftgate while playing around the rear area of the vehicle.

CAUTION
Liftgate lift
Make certain that you close the lift-gate before driving your vehicle. Possible damage may occur to the liftgate gas lifters and attached hardware if the liftgate is not closed prior to driving.

Deactivating the smart power lift-gate with the smart key

smart-power-04

Read all Instructions for Smart Power Liftgate, Windows and Hood User Guide

Kia Telluride 2022 Fuel Filler Door and Dual Wide Sunroof User Guide

Kia Telluride 2022 Fuel Filler Door and Dual Wide Sunroof User Guide

Fuel filler door

The vehicle’s fuel filler door must be opened and closed by hand from outside the vehicle.

Opening the fuel filler door

fuel-01

If the fuel filler door does not open because ice has formed around it, tap lightly or push on the lid to break the ice and release the lid. Do not apply excessive force to open the lid. If necessary, spray around the lid with an approved de-fluid (do not use radiator anti-freeze) or move the vehicle to a warm place and allow the ice to melt.

  • Stop the engine.
  • To open the fuel filler door, press the 3 o’clock position edge of the fuel filler door.

NOTICE
The fuel filler door will unlock when driver’s door is unlocked.
To unlock fuel filler door:

  •  Press the unlock button on your smart key.
  • Press the Central Door unlock button on armrest trim of drivers door.
  •  Pull the drivers inside door handle outward.
    The fuel filler door will lock when all doors are locked.
    To lock fuel filler door:
  • Press the lock button on your smart key.
  • Press the Central Door lock but

All doors will automatically lock after the vehicle speed exceeds 9.3 mph (15 km/h). Fuel door is also locked when vehicle speed exceeds 9.3 mph (15 km/h).3.

  • Pull the fuel filler door (1) out to fully open.
    fuel-01
  • To remove the fuel tank cap (2),turn it counterclockwise. You may hear a hissing noise as the pressure inside the tank equalizes.5. Place the cap on the fuel filler door.

Closing the fuel filler door

  1.  To install the cap, turn it clockwise until it “clicks” one time. This indicates that the cap is securely tightened.
  2.  Close the fuel filler door and push on the 3 o’clock position edge of the fuel filler door lightly gently to make sure that it is securely closed.

WARNING
Refueling
Always remove the fuel cap carefully and slowly. If the cap is venting fuel or if you hear a hissing sound, wait until the condition stops before completely removing the cap.
If pressurized fuel sprays out, it can cover your clothes or skin and subject you to the risk of fire and burns.

NOTICE
When refueling on unlevel ground, the fuel gauge may not point to the F position. It is not a malfunction. If you move your vehicle to a level ground, the fuel gauge will move to the full position.

NOTICE
Tighten the cap until it clicks one time, otherwise, the engine warning indicator light will illuminate.

Always check that the fuel cap is installed securely to prevent fuel spillage in the event of an accident.

WARNING
Fire/explosion risk
Read and follow all warnings posted at the gas station facility. Failure to follow all warnings will result in severe personal injury, severe burns or death due to fire or explosion.

Read all Instructions for Fuel Filler Door and Dual Wide Sunroof User Guide

Kia Telluride 2022 Sunroof User Guide

2022 Kia Telluride Sunroof | Detailed Setting

Sunroof

If your vehicle is equipped with a sunroof, you can slide or tilt your sunroof with the sunroof switch located on the overhead console.

Kia-Telluride-2022-Sunroof-User-Guide-01

The sunroof can only be operated when the ENGINE START/STOP but-ton is in the ON or START position.
The sunroof can be operated for approximately 30 seconds after the ENGINE START/STOP button is in the ACC or OFF position. However, if the front door is open, the sunroof cannot be operated even within the 30 seconds period.

WARNING

  • Never adjust the sunroof or sunshade while driving. This could result in loss of control and an accident that may cause injury, or property damage.
  •  Do not leave the engine running and the key in your vehicle with unsupervised children. Unattended children could operate the sunroof, which could result in serious injury.
  • Do not sit on the top of the vehicle. It may cause injury or vehicle damage.

NOTICE
Do not operate the sunroof when roof bars are installed on the vehicle or when there is luggage on the roof.

Sunshade

Use the power sunshade to block direct sunlight coming through the sunroof glass.

Kia-Telluride-2022-Sunroof-User-Guide-02

Open or close the sunshade by hand.

Kia-Telluride-2022-Sunroof-User-Guide-03

The sunshade opens automatically when the sunroof glass is opened by pushing the sunroof switch rear-ward, but the sunshade does not close automatically when the sun-roof glass is closed. Also, only the sunshade cannot be closed when the sunroof glass is opened.

NOTICE
Do not pull the sunshade up or down, or apply excessive force as such action may damage the sun-shade or cause it to malfunction.

Tilt open/close

Kia-Telluride-2022-Sunroof-User-Guide-04

  •  Push the sunroof switch upward, the sunroof glass tilts open.
  • Push the sunroof switch forward, the sunroof glass automatically closes.

Read all Instructions for Sunroof User Guide

Kia Telluride 2022 Steering Wheel User Guide

2022 Kia Telluride Adjust Steering Wheel User Guide

Steering wheel

The steering wheel of this vehicle is equipped with the Electric Power Steering (EPS) system.

Electric Power Steering (EPS) system

Electric power steering is a device that uses an electric motor to help the driver provide less effort in steering the vehicle.
If the vehicle is off or if the Electric Power Steering (EPS) becomes inoperative, the vehicle may still be steered, but it will require increased steering effort.
The EPS is controlled by the power steering control unit which senses the steering wheel torque and vehicle speed to command the motor.
The steering effort becomes heavier as the vehicle’s speed increases and becomes lighter as the vehicle’s speed decreases for better control of the steering wheel.
Should you notice any change in the effort required to steer during normal vehicle operation, have the power steering checked by an authorized Kia dealer.

NOTICE

The following symptoms may occur during normal vehicle operation:

  • When the ENGINE START/STOP button is the ON position, the steering wheel enters normal operation mode after diagnosing the Electric Power Steering system (for about 3 seconds).
  •  A click noise may be heard from  the EPS relay after turning the ENGINE START/STOP button is turned to the ON or OFF position.
  •  If the steering wheel is operated when the vehicle is not in motion or driven at a low speed, you may hear some noise.
  •  If the Electric Power Steering system does not operate normally, the warning light will illuminate or blink on the instrument cluster. If the power assistance of steering fails, you will need to use more force to steer.
  •  Operating the steering wheel at lower temperatures may require more force and accompany noise. However, when the temperature increases, it returns to normal.
  •  Take your vehicle to an authorized Kia dealer and have the vehicle checked as soon as possible.
  •  When the charging system warning light comes on due to the low voltage (when the alternator or battery does not operate normally or malfunctions), the steering wheel may require increased steering effort.

NOTICE
When you continuously operate the steering wheel, the overcurrent protection device is activated and it requires more force to operate the steering wheel. However, this doesn’t indicate a malfunction, and it works for your safety and will return to normal after some time.

NOTICE
If the Electric Power Steering (EPS) system does not work or an error occurs, the warning light on the instrument panel may be turned on or blink and it may require more force to operate the steering wheel. In this case, please hold the steering wheel more tightly than usual and operate with greater force. And then immediately pull your vehicle over to a safe place and have your vehicle inspected by an authorized Kia dealer.

If the EPS does not operate normally, the warning light will illuminate on the instrument cluster. The steering wheel may become difficult to control or operate abnormally. In this case, have the system inspected by an authorized Kia dealer.
When you operate the steering wheel in low temperatures, the steering effort may be high and abnormal noise could occur. If the temperature rises, the noise will disappear. This is a normal condition.
When the vehicle is stationary, and the steering wheel is turned all the way to the left or right continuously, the steering wheel becomes harder to turn. The power assist is limited to protect the motor from overheating.
As time passes, the steering wheel will return to its normal condition.

Tilt & telescopic steering wheel

A tilt and telescopic steering wheel allows you to adjust the steering wheel before you drive
You can also raise it to give your legs more room when you exit and enter the vehicle.
The steering wheel should be positioned so that it is comfortable for you to drive, while permitting you to see the instrument panel warning lights and gauges.

WARNING
Steering wheel adjustment
Never adjust the angle and height of the steering wheel while driving. You may lose steering control.

Read all Instructions for Steering Wheel User Guide

Kia Telluride 2022 Mirrors User Guide

2022 Kia Telluride Adjust The Mirrors Instructions

Mirrors

This vehicle is equipped with inside and outside rearview mirrors to provide views of objects behind the vehicle.

Inside rearview mirror

Adjust the rearview mirror so that the center view through the rear window is seen. Make this adjustment before you start driving.
Do not place objects in the rear seat or cargo area which would interfere with your vision through the rear window.

WARNING
Mirror adjustment
Do not adjust the rearview mirror while the vehicle is moving. This could result in loss of control.

NOTICE
Do not modify the inside mirror in any manner, including installing a wide mirror. Doing so could result in injury during an accident or deployment of the air bag.

CAUTION
Cleaning mirror
When cleaning the mirror, use a paper towel or similar material dampened with glass cleaner. Do not spray glass cleaner directly on the mirror. It may cause the liquid cleaner to enter the mirror housing.

Day/night rearview mirror (if equipped)
Make this adjustment before you start driving and while the day/night lever is in the day position (1).

Kia-Telluride-2022-Mirrors-User-Guide-01

* (1): Day, (2): Night
Pull the day/night lever toward you (2) to reduce the glare from the headlights of the vehicles behind you when driving at night.
Remember that you lose some rearview clarity in the night position.

Electric Chromic Mirror (ECM) (if equipped)
The electric rearview mirror automatically controls the glare from the headlights of the vehicles behind you at night or in low-light driving conditions.
The sensor (3) mounted in the mirror senses the light level around the vehicle, and automatically controls the headlight glare from the vehicles behind you.
When the engine is running, the glare is automatically controlled by the sensor mounted in the rearview mirror. Whenever the shift lever is shifted into reverse (R), the mirror will automatically go to the brightest setting in order to improve the drivers view behind the vehicle.

CAUTION
Cleaning mirror
When cleaning the mirror, use a paper towel or similar material dampened with glass cleaner. Do not spray glass cleaner directly on the mirror. It may cause the liquid cleaner to enter the mirror housing.

Operating the electric rearview mirror
The mirror defaults to the ON position whenever the ENGINE START/STOP button is turned on.

Kia-Telluride-2022-Mirrors-User-Guide-02

  •  Press the ON/OFF button (1) to turn the automatic dimming function off. The mirror indicator light will turn off.
  •  Press the ON/OFF button (1) to turn the automatic dimming function on. The mirror indicator light (2) will illuminate.

Electric chromic mirror with Home-Link system (if equipped)
Operating the electric rearview mirror
Kia-Telluride-2022-Mirrors-User-Guide-03

Read all Instructions for Mirrors User Guide

Kia Telluride 2022 Instrument Cluster and LCD Display User Guide

2022 Kia Telluride Instrument Cluster and LCD Display Guidance

Instrument Cluster

Type A

Kia-Telluride-2022-Instrument-Cluster-and-LCD-Display-User-Guide-02

Type B

Kia-TellurideKia-Telluride

* The actual cluster and contents of the LCD display in the vehicle may differ from the illustration.

  1.  Tachometer
  2. Speedometer
  3.  Engine coolant temperature gauge
  4. Fuel gauge
  5. Warning and indicator lights
  6.  LCD display

Instrument cluster control

The brightness of the instrument panel illumination is changed by pressing the illumination control button (“+” or “-“) when the ENGINE START/STOP button is ON, or the taillights are turned on.

  • If you hold the illumination control button (“+” or “-“), the brightness will continuously change.

Kia-Telluride-2022-Instrument-Cluster-and-LCD-Display-User-Guide-03

  • If the brightness reaches to the maximum or minimum level, an alarm will sound.
    Kia-Telluride-2022-Instrument-Cluster-and-LCD-Display-User-Guide-04

Gauges

The gauges display various information such as the speed of the vehicle, the amount of charge of the battery, and so on.

Speedometer

Kia-Telluride-2022-Instrument-Cluster-and-LCD-Display-User-Guide-05

The speedometer indicates the speed of the vehicle and is calibrated in miles per hour (mph) and/or kilometers per hour (km/h).

Tachometer

Kia-Telluride-2022-Instrument-Cluster-and-LCD-Display-User-Guide-06

The tachometer indicates the approximate number of engine revolutions per minute (rpm).
Use the tachometer to select the correct shift points and to prevent lugging and/or over-revving the engine.

CAUTION
Do not operate the engine within the tachometer’s RED ZONE. This may cause severe engine damage.

Engine Coolant Temperature Gauge

Kia-Telluride-2022-Instrument-Cluster-and-LCD-Display-User-Guide-07

Read all Instructions for Instrument Cluster and LCD Display User Guide

Kia Telluride 2022 LCD Displays User Guide

2022 Kia Telluride LCD Displays User Guide

LCD displays

LCD displays show the following information to drivers.

  • Trip information
  •  LCD modes
  •  Warning messages

Trip information (trip computer)

The trip computer is a microcomputer-controlled driver information system that displays information related to driving.

NOTICE
Some driving information stored in the trip computer resets if the battery is disconnected.

Trip modes
To change the trip mode, scroll the toggle the switch ( / ) on the steering wheel.

Kia-Telluride-2022-LCD-Displays-User-Guide-01

Fuel Economy

Kia-Telluride-2022-LCD-Displays-User-Guide-01

Average Fuel Economy (1)

  • The average fuel economy is calculated by the total driving distance and fuel consumption since the last average fuel economy reset.
    • Fuel economy range: 0~99.9mpg or L/100 km
  • The average fuel economy can be reset both manually and automatically.
    Manual reset
    To clear the average fuel economy manually, press the OK button on the steering wheel for more than 1 second when the average fuel economy is displayed.

Automatic reset
To automatically reset the average fuel economy select menu from the ‘Fuel economy auto reset’ in the User Settings mode on the LCD dis-play.

  • OFF  You may set to default manually by using the trip switch reset button.
  • After ignition – The vehicle will automatically set to default once 4 hours pass after the Ignition is in OFF.
  •  After refueling – After refueling more than 1.6 gallons (6 liters) and driving over 1 mph (1 km/h), the vehicle will reset to default automatically.

Instant Fuel Economy (2)

  • This mode displays the instant Instant Fuel Economy (2)
  •  This mode displays the instant fuel economy.

Accumulated Info display
This display shows the accumulated trip distance (1), the average fuel efficiency (2), and the total driving time (3).

Kia-Telluride-2022-LCD-Displays-User-Guide-03

  •  The accumulated information is calculated after the vehicle has run for more than 0.19 miles (300 meters).
  •  If you press “OK” button for more than 1 second after the Cumulative Information is displayed, the information will be reset.
  •  If the engine is running, even when the vehicle is not in motion, the information will be accumulated.

NOTICE
The vehicle must be driven for a minimum of 0.19 miles (300 meters) since the last ignition cycle before the average accumulated driving information is recalculated.

Drive Info display
This display shows the trip distance (1), the average fuel efficiency (2), and the total driving time (3) information once per one ignition cycle.

Read all Instructions for LCD Displays User Guide

Kia Telluride 2022 Warning and Indicator Lights User Guide

2022 Kia Telluride Warning and Indicator Lights Instructions

Warning and indicator lights

The warning light and indicator light indicate a situation where the driver should be careful and whether the various functions are activated.

Warning lights

The warning light indicates situations that require the driver to pay attention.

NOTICE
Warning lights
Make sure that all warning lights are OFF after starting the vehicle. If any light is still ON, this indicates a situ-ation that needs attention.

Air bag warning light
This warning light illuminates:

  •  Once you set the ENGINE START/STOP button to the ON position
    • It illuminates for approximately 6 seconds and then goes off.
  •  When there is a malfunction with the Supplemental Restraint System (SRS).
    In this case, have the vehicle inspected by an authorized Kia dealer.

Seat belt warning light
This warning light informs the driver that the seat belt is not fastened.

* For more details, refer to “Seat belts

Parking brake & brake fluid warning light
This warning light illuminates:

  • Once you set the ENGINE START/ STOP button to the ON position.
    • It illuminates for approximately 3 seconds
    •  It remains on if the parking brake is applied.
  • When the parking brake is applied
  • When the brake fluid level in the reservoir is low.
    •  If the warning light illuminates with the parking brake released, it indicates the brake fluid level in reservoir is low.

If the brake fluid level in the reservoir is low:

  1. Drive carefully to the nearest safe location and stop your vehicle.
  2. With the vehicle stopped, check the brake fluid level immediately and add fluid as required (For more details, refer to “Brake fluid” on page 7-24). Then check all brake components for fluid leaks. If any leak on the brake system is still found, the warning light

remains on, or the brakes do not operate properly, do not drive the vehicle.
In this case, have your vehicle towed to an authorized Kia dealer and inspected.

Dual-diagonal braking system
Your vehicle is equipped with dual-diagonal braking systems. This means that braking still works for two wheels even if one of the dual systems should fail.
With only one of the dual systems working, greater pedal pressure is required to stop the vehicle.
Also, the vehicle will require increased stopping distance with only a portion of the brake system working.

WARNING
Parking Brake & Brake Fluid Warning Light
Driving the vehicle with a warning light ON is dangerous. If the Parking Brake & Brake Fluid Warning Light illuminates with the parking brake released, it indicates that the brake fluid level is low.
In this case, have your vehicle inspected by an authorized Kia dealer.

Read all Instructions for Warning and Indicator Lights User Guide

Kia Telluride 2022 Head-Up Display (HUD), Rear View Monitor (RVM) and Surround View Monitor (SVM) User Guide

2022 Kia Telluride Head-Up Display, Rear View and Surround View Monitor Guidelines

Head-Up Display (HUD)

The Head-Up Display (HUD) is a transparent display that projects an image of certain information from the instrument cluster and navigation system on the windshield glass.

HEAD-UP-01

  •  The HUD image on the HUD  screen may not be visible when:
    • Sitting posture prevents visibility.
    • Wearing a polarized sunglasses.
    • There is an object on the cover of the Head-Up Display.
    • Driving on a wet road.
    • Lighting is turned on inside the vehicle.
    • Light is entering the vehicle from the outside.
    • Wearing inadequate glasses for your eyesight.
  •  If the HUD image is not displayed well, adjust the height, rotation or illumination of the HUD in the cluster.
  • When the HUD needs inspection or repair, have your vehicle inspected or repaired by an authorized Kia dealer.

HUD ON/OFF

HEAD-UP-02

The HUD display can be activated or deactivated in user setting mode while engine is ON.

WARNING
Head-Up Display
The Head-Up Display is a supple-mental system. Do not solely rely on the system, always drive safely, and pay attention to the driving conditions on the road.

HUD Information.

  1. Turn By Turn navigation information (if equipped)
  2.  Road signs (if equipped)
  3. Speedometer
  4.  SCC setting speed (if equipped)
  5. SCC Vehicle Distance information (if equipped)
  6. Lane Safety information (if equipped)
  7. Blind-Spot Safety information (if equipped)
  8. Highway Driving Assist information (if equipped)
  9. Lane Following Assist information (if equipped)
  10. Highway Auto Speed Change information (if equipped)
  11. Warning lights (low fuel)
  12. AV mode information

Road signs and Turn By Turn navigation information are available depending on the region.

HUD Setting
On the LCD display, you can change the HUD settings as follows.

  1. Display height
  2. Rotation
  3. Brightness
  4. Content selection
  5. Speedometer size
  6. Speedometer color

For more details, refer to “LCD Display Modes

Rear View Monitor (RVM) (if equipped)

Rear View Monitor is a supplemental function that shows the area behind the vehicle on the multimedia system screen to assist you when parking or backing up.
For detailed information, refer to a separately supplied manual.

REAR-01

  • Rear View Monitor with parking  guidance will activate when the engine is running and the shift lever is in the R (Reverse) position.
  • To assist in parking, the rear view is shown (the parking guide line disappears) on the screen when the shift lever is moved from R (Reverse) to D (Drive) with vehicle speed below 10 mph (15 km/h).

Rear View Monitor Top view

REAR-02

When you touch the icon (1), the top view is displayed on the screen and shows the distance from the vehicle in the back of your vehicle. Touch the icon (1) again, to switch back to the previous screen.

WARNING
Backing & using camera
Never rely solely on the rear view camera. You must always use methods of viewing the area behind you including looking over both shoulders as well as continuously checking all three rear view mirrors. Due to the difficulty of ensuring that the area behind you remains clear, always back up slowly and stop immediately if you suspect that a person, and especially a child, might be behind you.

NOTICE

  •  Do not spray the camera or its  surrounding area directly with a high pressure washer. Shock applied from high pressure water may cause the device to not operate normally.
  • Do not use any cleanser containing acid or alkaline detergents when cleaning the lens. Use only a mild soap or neutral detergent, and rinse thoroughly with water.
  • If the camera lens is covered with foreign material, Rear View Moni-tor may not operate normally. Always keep the camera lens clean.
    However, do not use chemical sol-vents such as strong detergents containing high alkaline or volatile organic solvents (gasoline, acetone etc.). This may damage the camera lens.
  • When your vehicle has not been operated for a long time or has been parked in indoor parking space in winter, the image may be temporarily blurred due to exhaust fumes.

Read all Instructions for Head-Up Display (HUD), Rear View Monitor (RVM) and Surround View Monitor (SVM) User Guide

Kia Telluride 2022 Reverse Parking Distance Warning (PDW) and Forward/Reverse Parking Distance Warning (PDW) User Guide

2022 Kia Telluride Reverse And Forward/Reverse Parking Distance Warning

Reverse Parking Distance Warning (PDW)

reverse-01

This function is a supplemental function and it is not intended to nor does it replace the need for extreme care and attention of the driver. The sensing range and objects detect-able by the back sensors (1) are limited. Whenever backing-up, pay as much attention to what is behind you as you would in a vehicle with-out Reverse Parking Distance Warn-ing.

WARNING
Reverse Parking Distance Warning
Never rely solely on Reverse Parking Distance Warning. Always perform a visual inspection to make sure the vehicle is clear of all obstructions before moving the vehicle in any direction. Stop immediately if you are aware of a child anywhere near your vehicle. Some objects may not be detected by the sensors, due to the object’s size or material.

Reverse Parking Distance Warning operation
Operating condition

  •  This function will activate when the indicator on the Parking Safety button is not illuminated. If you desire to deactivate Reverse Parking Distance Warning, press the Parking Safety button again. (The indicator on the button will illuminate.) To turn the function on, press the button again. (The indicator on the button will go off.)
  • This function will activate when backing up with the ENGINE START/STOP button ON.
    If the vehicle is moving at a speed over 3 mph (5 km/h), the function may not be activated correctly.
  • The sensing distance while the back-up warning system is in operation is approximately 48 inches (120 cm) from the central area of the rear bumper and 24 inches (60 cm) from the side area of the rear bumper.
  • When more than two objects are sensed at the same time, the  closest one will be recognized first.

Types of warning sound

  • When an object is 48 inches to 24 inches (120 cm to 60 cm) from the rear bumper: Buzzer beeps intermittently.
  • When an object is 24 inches to 12 inches (60 cm to 30 cm) from the rear bumper: Buzzer beeps more frequently.
  • When an object is within 12 inches (30 cm) of the rear bumper: Buzzer sounds continuously.

Reverse Parking Distance Warning not operation
Reverse Parking Distance Warning may not operate properly when:

  • Moisture is frozen to the sensor.
    (It will operate normally once the moisture clears.)
  • The sensor is covered with foreign matter, such as snow or water, or the sensor cover is blocked. (It will operate normally when the material is removed or the sensor is no longer blocked.)
  • Driving on uneven road surfaces (unpaved roads, gravel, bumps, gradient).
  • Objects generating excessive noise (vehicle horns, loud motor-cycle engines, or truck air brakes) are within range of the sensor.
  • There is rain or water spraying nearby.
  • Wireless transmitters or mobile phones are within range of the sensor.
  • The sensor is covered with snow.
  • Trailer towing The detecting range may decrease when:
  • The sensor is covered with foreign matter such as snow or water. (The sensing range will return to normal when removed.)
  • Outside air temperature is extremely hot or cold.

The following objects may not be recognized by the sensor:

  • Sharp or slim objects such as ropes, chains or small poles.
  • Objects which tend to absorb the frequency emitted by the sensor such as clothes, sound absorbent material or snow.
  •  There are undetectable objects smaller than 40 inches (100 cm) in height and narrower than 6 inches (15 cm) in diameter.

Reverse Parking Distance Warning precautions

  •  The sound of Reverse Parking Distance Warning may change depending on the speed and shape of the objects detected.
  • Reverse Parking Distance Warning may malfunction if the vehicle  bumper height or sensor installation has been modified or dam-aged. Any non-factory installed equipment or accessories may also interfere with the sensor performance.
  • The sensor may not recognize objects less than 12 inches (30 cm) from the sensor, or it may sense an incorrect distance. Use caution.
  • When the sensor is frozen or covered with snow, dirt, or water, the sensor may be inoperative until the material is removed using a soft cloth.
  • To prevent damage, do not push, scratch or strike the sensor.

NOTICE
This function can only sense objects within the range and location of the sensors. It cannot detect objects in other areas where sensors are not installed. Also, small or slim objects, such as poles or objects located between sensors may not be detected by the sensors. Pay close attention when the vehicle is driven close to objects on the road, particularly pedestrians, and especially children. Always visually check behind the vehicle when backing up. Be sure to inform any drivers of the vehicle that may be unfamiliar with the function regarding the functions capabilities and limitations.

Read all Instructions for Reverse Parking Distance Warning (PDW) and Forward/Reverse Parking Distance Warning (PDW) User Guide

Kia Telluride 2022 Blind-Spot View Monitor (BVM) and Lighting User Guide

2022 Kia Telluride Blind-Spot View Monitor and Lighting Guidelines

Blind-Spot View Monitor (BVM)

Blind-Spot View Monitor displays the passenger-side rear areas in the cluster when the function is activated.

bild-

To turn on Blind-Spot View Monitor

When Blind-Spot View Monitor is enabled in the settings.

  1.  ENGINE START/STOP button is in the ON position.
  2.  The turn signal is activated.

To turn off Blind-Spot View Moni-tor

  1.  ENGINE START/STOP button is in the OFF position.
  2.  The turn signal is deactivated.
  3. Other warning screen pops up and takes priority over Blind-Spot View Monitor.

WARNING
Like all assistance function, Blind-Spot View Monitor has limitations.

Sole-reliance on the function may result in a collision.
NOTICE

  •  This function is a supplemental  function only. It is the responsibility of the driver to always check the area around the vehicle before and while making turns or changing lanes.
  • Always look around your vehicle to make sure there are no objects or obstacles before moving the vehicle in any direction to prevent a collision.
  • Objects are closer than they appear. Failure to visually confirm that is safe to change the lane before doing so may result in crash and serious injury or death.
  • If the camera lens is covered with foreign material, Blind-Spot View Monitor may not operate normally. Always keep the camera lens clean. However, do not use chemical solvents such as strong detergents containing high alkaline or volatile organic solvents (gasoline, acetone etc.). This may damage the camera lens.

Lighting

This vehicle is equipped with a variety of lights to illuminate the interior and exterior of the vehicle.

CAUTION
To prevent the battery from being discharged, do not leave the head-light and interior light on for a pro-longed time while the engine is not running.

Battery saver function

The purpose of this feature is to prevent the battery from being dis-charged if the lights are left in the ON position. The system automatically shuts off the parking lights after the engine is off and the driver’s door is opened.
However, the position lamps stay ON even when the driver-side door is opened if the light switch is operated after the engine is turned off.
If necessary, to keep the lamps on turn the position lamps OFF and ON again using the headlamp switch on the steering column after the engine is turned off.

Daytime Running Light (DRL)

The Daytime Running Light (DRL) can make it easier for others to see the front of your vehicle during the day.
The DRL can be helpful in many different driving conditions, and it is especially helpful after dawn and before sunset.
The DRL will turn the dedicated lamp OFF when:

  • The headlight switch is on.
  • The vehicle is off.
  •  The front fog light is on.
  • Engaging the Parking Brake.

Lighting control

The light switch has a headlight and a position lamp position.

light-01

To operate the lights, turn the knob at the end of the control lever to one of the following positions:

  1. OFF position / DRL off position.
  2. Auto light position
  3.  Position & Tail lamp
  4. Headlight position

Position & Tail lamp

light-02

Read all Instructions for Blind-Spot View Monitor (BVM) and Lighting User Guide

Kia Telluride 2022 Wipers and Washers and Interior Lights User Guide

2022 Kia Telluride Wipers and Washers and Interior Lights Instructions

Wipers and washers

The wipers and washers remove foreign substances from the wind-shield and rear window, helping to maintain visibility.

Front windshield wiper/washer

Kia-Telluride-2022-Wipers-and-Washers-and-Interior-Lights-User Guide-01

Rear windshield wiper/washer

Kia-Telluride-2022-Wipers-and-Washers-and-Interior-Lights-User Guide-02

A: Wiper speed control (front)

  • MIST  Single wipe
  •  OFF  Off
  •  INT  Intermittent wipe
  • AUTO*  Auto control wipe
  • LO Low wiper speed
  •  HI  High wiper speed

B: Intermittent control wipe time adjustment
C: Wash with brief wipes (front)
D: Rear wiper/washer control

  • HI  Continuous wipe
  •  LO  Intermittent wipe
  •  OFF  Off

E: Wash with brief wipes (rear)
*: if equipped

Windshield washers
Operates as follows when the ENGINE START/STOP button is turned ON.

Read all Instructions for Wipers and Washers and Interior Lights User Guide

Kia Telluride 2022 Welcome System, Defroster and Climate Control System User Guide

2022 Kia Telluride Welcome System, Defroster and Climate Control System

Welcome system (if equipped)

The welcome system is a function that illuminates the surroundings or the interior when the driver approaches or exits the vehicle.
Headlight (headlamp) escort function
The headlights (and/or taillights) remain on for approximately 5 minutes after the vehicle is turned off. However, if the driver’s door is opened and closed, the headlights are turned off after 15 seconds.
The headlights can be turned off by pressing the lock button on the smart key twice or turning off the light switch from the headlight or Auto light position.
Interior light
When the interior light switch is in the DOOR position and all doors (and liftgate) are locked and closed, the room lamp will come on for 30 seconds if any of the following occurs:

  • With the smart key system – When the door unlock button is pressed on the smart key.
    • When the button of the outside door handle is pressed.

At this time, if you press the door lock button, the lamps will turn off immediately.

Pocket lamp (if equipped)
When all doors are locked and closed, the pocket lamp will come on for 15 seconds if any of the following occurs:

  • With the smart key system
    • When the door unlock button is pressed on the smart key.
    • When the button of the outside door handle is pressed.

At this time, if you press the door lock button, the lamps will turn off immediately.

Defroster

The vehicle is equipped with a defroster for removing frost or fog from the rear window.

CAUTION
Conductors
To prevent damage to the conductors bonded to the inside surface of the rear window, never use sharp instruments or window cleaners containing abrasives to clean the window.

If you want to defrost and defog the front windshield, refer to “Wind-shield defrosting and defogging”

Operating rear window defroster

The defroster heats the window to remove frost, fog and thin ice from the rear window, while the vehicle is on.
If there is heavy accumulation of snow on the rear window, brush it off before operating the rear defroster.

Read all Instructions for Welcome System, Defroster and Climate Control System User Guide

Kia Telluride 2022 Automatic Climate Control System User Guide

2022 Kia Telluride Automatic Climate Control System Guidelines

Automatic climate control system

The automatic climate control system uses cooling and heating to help maintain a pleasant environment inside the vehicle.

AUTOMATIC-01

  1. Driver’s temperature control knob
  2.  AUTO (automatic control) button
  3. OFF button
  4.  Front windshield defroster button
  5. Fan speed control button
  6. Rear control button
  7. Mode selection button
  8. Air conditioning (A/C) button
  9. Rear window defroster button
  10.  Air intake control button
  11. Passenger’s temperature control knob
  12. SYNC button
  13. Air conditioning display

NOTICE
Operating the blower when the ENGINE START/STOP button is in the ON position could cause the battery to discharge. Operate the blower when the vehicle is ON.

Heating and air conditioning automatically

  1. Press the AUTO button.
    The modes, fan speeds, air intake and air-conditioning will be con-trolled automatically by setting the temperature.
  2. Turn the temperature control switch to the desired temperature.

Driver’s side Passenger’s side

AUTOMATIC-03

  • To turn the automatic operation off, select any of the following buttons or switches:
    • Mode selection button
    • Air conditioning (A/C) button- Front windshield defroster button (Press the button one more time to deselect the front windshield defroster function. The ‘AUTO’ sign will illuminate on the information display once again.)
    • Fan speed control switch
    • The selected function will be controlled manually while other functions operate automatically.
  •  For your convenience and to improve the effectiveness of climate control, use the AUTO button and set the temperature to 72 /F (22 /C).

NOTICE
Do not place anything over the sensor located on the instrument panel to ensure better control of the heating and cooling system.

AUTOMATIC-04

Heating and air conditioning manually

The heating and cooling system can be controlled manually by pressing but-tons or turning knob(s) other than the AUTO button.

AUTOMATIC-05

In this case, the system works sequentially according to the order of but-tons or knob(s) selected.

  1. Start the vehicle.
  2. Set the mode to the desired position.
    For improving the effectiveness of heating and cooling;
    • Heating:
    • Cooling:
  3.  Set the temperature control to the desired position.
  4. Set the air intake control to the outside (fresh) air position.
  5. Set the fan speed control to the desired speed.
    If air conditioning is desired, turn the air conditioning system on.

Press the AUTO button in order to convert to fully automatic control of the system.
Mode selection
The mode selection button controls the direction of the air flow through the ventilation system.

Read all Instructions for Automatic Climate Control System User Guide

Kia Telluride 2022 Windshield Defrosting and Defogging And Additional Features of Climate Control and Storage Compartment User Guide

2022 Kia Telluride Additional Features of Climate Control and Storage Compartment

Windshield defrosting and defogging

When the windshield is covered with frost or moisture, the front view is blurred, you should remove the frost and moisture.

WARNING
Windshield heating
Do not use the or position
during cooling operation in extremely humid weather. The difference between the temperature of the outside air and the windshield could cause the outer surface of the windshield to fog up, causing loss of visibility. In this case, set the mode selection to the position and  fan speed control to the lower speed.

  • To speed up the defrosting process, turn the temperature control all the way to the right and set the fan speed to the highest.
  • If you want warm air to flow towards the floor while defrosting or defogging, set the mode to the floor-defrost position.
  •  Before driving, clear all snow and ice from the windshield, rear window, outside rear view mirrors, and all side windows.
  • Clear all snow and ice from the hood and air inlet in the cowl grill to improve heater and defroster efficiency and to reduce the probability of fogging up the inside of the windshield.

CAUTION
Do not place anything on the instrument panel which may cover the air outlets. Otherwise, air flow may be obstructed, preventing the windshield defoggers from defogging.

WINDSHEID-01

Defogging inside windshield with manual climate control system

WINDSHEID-02

  1. Select any fan speed except “0” position.
  2. Select desired temperature.
  3. Select the or position. The outside (fresh) air and air conditioning will be selected automatically.

If the air conditioning and outside (fresh) air position are not selected automatically, press the corresponding button manually.

Defrosting outside windshield with manual climate control system

WINDSHEID-03

  1. Set the fan speed to the highest (extreme right) position.
  2.  Set the temperature to the extreme hot position.
  3. Select the position.
    The outside (fresh) air and air conditioning will be selected automatically.

Defogging inside windshield with the automatic climate control

WINDSHEID-04

  1.  Set the fan speed to the desired position.
  2. Select desired temperature.
  3. Press the defroster button (The outside (fresh) air position will be selected automatically and the air conditioning will turn on according to the detected ambient temperature.

If the air conditioning and outside (fresh) air position are not selected automatically, adjust the corresponding button manually. If the
position is selected, lower fan speed is adjusted to a higher fan speed.

Defrosting outside windshield with automatic climate control

WINDSHEID-05

  1.  Set the fan speed to the highest position.
  2. Set the temperature to the extreme hot (HI) position.
  3. Press the defroster button ( The outside (fresh) air position will be selected automatically and the air conditioning will turn on according to the detected ambient temperature.

Read all Instructions for Windshield Defrosting and Defogging And Additional Features of Climate Control and Storage Compartment User Guide

Kia Telluride 2022 Interior Features User Guide

2022 Kia Telluride Interior Features Guidelines

Interior Features

There are various features inside the vehicle for the convenience of the occupants.

Cup holder

The front and rear seats of the vehicle have cup holders to accommodate cups.

WARNING
Hot liquids

Do not place uncovered cups with hot liquid in the cup holder while the vehicle is in motion. If the hot liquid spills, you may burn yourself. Such a burn to the driver could lead to loss of control of the vehicle.

CAUTION

  •  Keep your drinks sealed while driving to prevent spilling your drink. If liquid spills, it may get into the vehicle’s electrical/electronic system and damage electrical/electronic parts.
  •  When cleaning spilled liquids, do not use heat to dry the cup holders. This may damage the cup holder.
  •  Use shatter-proof and light containers. Otherwise, there is an increased danger of injury in an accident.
  • Do not forcefully push unsuitable containers into the cup holders. This may result in damage.

Front

Kia-Telluride-2022-Interior-Features-User-Guide-01

2nd row

Kia-Telluride-2022-Interior-Features-User-Guide-02

2nd row – center (if equipped)

Kia-Telluride-2022-Interior-Features-User-Guide-03

3rd row

Kia-Telluride-2022-Interior-Features-User-Guide-04

Cups or small beverage cans may be placed in the cup holders.

2nd-row center (if equipped)
Pull the armrest down to use the cup holders.

Seat warmer (if equipped)

The seat warmer is provided to warm the front seats during cold weather.

Read all Instructions for Interior Features User Guide

Kia Telluride 2022 Exterior Features, Audio System and Declaration of Conformity User Guide

2022 Kia Telluride Exterior Features And Audio System Guidelines

Exterior features

If the vehicle has a roof rack, you can load cargo on top of your vehicle.

Roof rack (if equipped)

Crossbars and fixing components needed to install the roof rack on your vehicle may be obtained from an authorized Kia dealer.

NOTICE

  • The crossbars (if equipped) should be placed in the proper load-carrying positions prior to placing items onto the roof rack.
  • If the vehicle is equipped with a sunroof, be sure not to position cargo onto the roof rack in such a way that it could interfere with sunroof operation.
  • When the roof rack is not being used to carry cargo, the crossbars may need to be repositioned if wind noise is detected.

CAUTION
Loading Roof Rack

  • When carrying cargo on the roof rack, take the necessary precautions to make sure the cargo does not damage the roof of the vehicle.
  • When carrying large objects on the roof rack, make sure they do not exceed the overall roof length or width.
  • When you are carrying cargo on the roof rack, do not operate the sunroof (if equipped). This can damage the sunroof.

The following specification is the maximum weight that can be loaded onto the roof rack. Distribute the load as evenly as possible across the crossbars (if equipped) and roof rack and secure the load firmly.enterior-02

Loading cargo or luggage in excess of the specified weight limit on the roof rack may damage your vehicle.

WARNING

  • The vehicle center of gravity will be higher when items are loaded onto the roof rack. Avoid sudden starts, braking, sharp turns, abrupt maneuvers or high speeds that may result in loss of vehicle

Audio system

NOTICE
If you install an aftermarket HID head lamp, your vehicle’s audio and electronic device may malfunction.

If your vehicle is equipped with multimedia system, refer to a separately supplied manual for detailed information.

Antenna

audio-system2

The roof antenna transmits and receives wireless signals such as AM/FM, Sirius XM, GNSS, etc. The signals which antenna can transmit and receive vary by vehicle option.

USB port

You can use a USB port to plug in a USB.

audio-system-08

Read all Instructions for Exterior Features, Audio System, and Declaration of Conformity User Guide

Kia Telluride 2022 Be Sure the Exhaust System Does Not Leak, Before Driving and ENGINE START/STOP Button User Guide

2022 Kia Telluride Exhaust System, Driving and ENGINE Instructions

Be sure the exhaust system does not leak

The exhaust system should be checked whenever the vehicle is raised to change the oil or for any other purpose.
If you hear a change in the sound of the exhaust or if you drive over something that strikes the underneath side of the vehicle, have the exhaust system checked as soon as possible by an authorized Kia dealer.

WARNING
Engine exhaust
Do not inhale exhaust fumes or leave your engine running in an enclosed area for a prolonged time. Exhaust fumes contain carbon monoxide, a colorless, odorless gas that can cause unconsciousness and death by asphyxiation.

WARNING
Open liftgate

Do not drive with the liftgate open. Poisonous exhaust gases can enter the passenger compartment. If you must drive with the liftgate open proceed as follows:

  1. Close all windows.
  2.  Open side vents.
  3. Set the air intake control at “Fresh”, the airflow control at “Floor” or “Face” and the fan at the highest speed.

Before driving

Before getting into the vehicle, you should examine the car and its surroundings. After getting into the vehicle, you should check a number of things before driving.

Before entering vehicle

  • Be sure that all windows, outside mirror(s), and outside lights are clean.
  •  Check the condition of the tires.
  • Check under the vehicle for any sign of leaks.
  • Be sure there are no obstacles behind you if you intend to back up.

Necessary inspections
Fluid levels, such as engine oil, engine coolant, brake fluid, and washer fluid should be checked on a regular basis, at the exact interval depending on the fluid. Further details are provided in chapter 7,
“Maintenance”.

WARNING
Distracted driving
Focus on the road while driving. The driver’s primary responsibility is in the safe and legal operation of the vehicle. Any use of handled devices, other equipment or vehicle systems that distract the driver should not be used during vehicle operation.

Before starting

  • Close and lock all doors.
  •  Position the seat so that all controls are easily reached.
  •  Buckle your seat belt.
  • Adjust the inside and outside rearview mirrors.
  •  Be sure that all lights work.
  •  Check all gauges.
  • Check the operation of warning lights when the ENGINE START/STOP button is turned to the ON position.
  •  Release the parking brake and make sure the brake warning light is not on.

For safe operation, be sure you are familiar with your vehicle and its equipment.

WARNING
Fire risk
When you intend to park or stop the vehicle with the engine on, be care-ful not to depress the accelerator pedal for a long period of time. It may overheat the engine or exhaust system and cause fire.

WARNING
Check surroundings

Always check the surrounding areas near your vehicle for people, especially children, before putting a vehicle into D (Drive) or R (Reverse).

WARNING
Loose objects
Securely store items in your vehicle. When you make a sudden stop or turn the steering wheel rapidly, loose objects may drop on the floor and it could interfere with the operation of the foot pedals, possibly causing an accident.

WARNING
Driving while intoxicated
Do not drive while intoxicated. Drinking and driving is dangerous. Even a small amount of alcohol will affect your reflexes, perceptions and judgment.
Driving while under the influence of drugs is as dangerous as or more dangerous than driving drunk.

WARNING
Proper footwear
Always wear appropriate shoes when operating your vehicle. Unsuitable shoes (high heels, ski boots, sandals, etc.) may interfere with your ability to use the brake and accelerator pedals.

ENGINE START/STOP button

 Illuminated ENGINE START/STOP button

Kia-Telluride-2022 Be-Sure the-Exhaust-System-Does-Not-Leak,-Before-Driving-and-ENGINE-START-STOP-Button-User Guide-01

Read all Instructions for Be Sure the Exhaust System Does Not Leak, Before Driving and ENGINE START/STOP Button User Guide

Kia Telluride 2022 Automatic Transmission and All Wheel Drive (AWD) System User Guide

2022 Kia Telluride Transmission And All Wheel Drive (AWD) System

Automatic transmission

The automatic transmission has 8 forward speeds and one reverse speed.

Kia-Telluride-2022-Automatic-Transmission-and-All-Wheel-Drive-(AWD)-System-User-Guide-01

  • Press the brake pedal and the lock release button when shifting.
  • Press the lock release button when shifting.
  • The shift lever can be shifted freely.
  • The individual speeds are selected automatically, depending on the position of the shift lever.

NOTICE
The first few shifts on a new vehicle, if the battery has been disconnected, may be somewhat abrupt. This is a normal condition, and the shifting sequence will adjust after shifts are cycled a few times by the TCM (Transmission Control Module) or PCM (Powertrain Control Module).For smooth operation, press the brake pedal when shifting from N (Neutral) to a forward or reverse gear.

WARNING
Automatic transmission

  • Always check the surrounding areas near your vehicle for people, especially children, before shifting a vehicle into D (Drive) or R (Reverse).
  •  Before leaving the driver’s seat, always make sure the shift lever is in the P (Park) position; then set the parking brake fully and shut the engine off. Unexpected and sudden vehicle movement can occur if these precautions are not followed in the order identified.
  • Do not use the engine brake (shifting from a high gear to lower gear) rapidly on slippery roads. The vehicle may slip causing an accident.

CAUTION

  •  To avoid damage to your transmission, do not accelerate the engine in R (Reverse) or any for-ward gear position with the brakes on.
  •  When stopped on an incline, do not hold the vehicle stationary with engine power. Use the service brake or the parking brake.
  • Do not shift from N (Neutral) or P 􀀁 Do not shift from N (Neutral) or P

Transmission ranges

The indicator in the instrument cluster displays the shift lever position when the ENGINE START/STOP button is in the ON position.

P (Park)
Always come to a complete stop before shifting into P (Park). This position locks the transmission and prevents the front wheels from rotating.

WARNING

  •  Shifting into P (Park) while the  vehicle is in motion will cause the drive wheels to lock which will cause you to lose control of the vehicle and possibly damage the transmission.
  • Do not use the P (Park) position in place of the parking brake. Always make sure the shift lever is latched in the P (Park) position and set the parking brake fully.
  • Never leave a child unattended in a vehicle.

CAUTION
The transmission may be damaged if you shift into P (Park) while the vehicle is in motion.

R (Reverse)
Use this position to drive the vehicle backward.

CAUTION
Always come to a complete stop before shifting into or out of R
(Reverse); you may damage the transmission if you shift into R while the vehicle is in motion, except as explained in “Rocking the vehicle” in this section.

N (Neutral)
When in Neutral, wheels and trans-mission are not engaged. The vehicle will roll freely even on the slightest incline unless the parking brake or service brakes are applied.

WARNING
Do not drive with the shift lever in N (Neutral). The engine brake will not work and could lead to an accident.

CAUTION
Always park the vehicle in “P” (Park) for safety and engage the parking brake.

D (Drive)
This is the normal forward driving position. The transmission will automatically shift through a 8-gear sequence, providing the best fuel economy and power.

NOTICE
Always come to a complete stop before shifting into D (Drive).

Manual mode
Whether the vehicle is stationary or in motion, Manual mode is selected by pushing the shift lever from the D (Drive) position into the manual gate. To return to D (Drive) range operation, push the shift lever back into the main gate.

Read all Instructions for Automatic Transmission and All Wheel Drive (AWD) System User Guide

Kia Telluride 2022 Brake System User Guide

Kia Telluride 2022 Brake System Guidelines

Brake system

Your vehicle has power-assisted brakes, a parking brakes, and various braking systems for safe driving.

Power brakes

Your vehicle has power-assisted brakes that adjust automatically through normal usage.
In the event that the power-assisted brakes lose power because of a stalled engine or some other reason, you can still stop your vehicle by applying greater force to the brake pedal than you normally would. The stopping distance, however, will be longer.
When the engine is not running, the reserve brake power is partially depleted each time the brake pedal is applied. Do not pump the brake pedal when the power assist has been interrupted. Pump the brake pedal only when necessary to maintain steering control on slippery surfaces.

NOTICE

  • When stepping on the brake pedal under a certain driving or weather condition you may witness your car make a sound of squealing or some other noises. This is not a brake malfunction but a normal phenomenon.
  •  When driving on the road to which deicing chemicals are applied, the vehicle may witness noises from the brake or abnormal abrasion of tires because of such deicing chemicals. You should operate brake additionally so that you would be able to remove the deicing chemicals on the brake disk and pad under a safe traffic condition.

CAUTION
Brake Pedal

Do not drive with your foot resting on the brake pedal. This will create abnormally high brake temperatures which can cause excessive brake lining and pad wear.

WARNING
Steep hill braking
Avoid continuous application of the brakes when descending a long or steep hill by shifting to a lower gear. Continuous brake application will cause the brakes to overheat and could result in a temporary loss of braking performance. Wet brakes may impair the vehicle’s ability to safely slow down; the vehicle may also pull to one side when the brakes are applied. Applying the brakes lightly will indicate whether they have been affected in this way. Always test your brakes in this fashion after driving through deep water. To dry the brakes, apply them lightly while maintaining a safe forward speed until brake performance returns to normal.
In the event of brake failure
If service brakes fail to operate while the vehicle is in motion, you can make an emergency stop with the parking brake. The stopping distance, however, will be much greater than normal.

WARNING
Parking brake

Avoid applying the parking brake to stop the vehicle while it is moving except in an emergency situation. Applying the parking brake while the vehicle is moving at normal speeds can cause a sudden loss of control of the vehicle. If you must use the parking brake to stop the vehicle, use great caution in applying the brake.

Brake Over Accelerator
In the event the accelerator pedal becomes stuck or entrapped, apply steady and firm pressure to the brake pedal to slow the vehicle and reduce engine power.

If you experience this condition, take the following steps:

  1. Apply the brakes and bring your vehicle to a safe stop.
  2. Move the transmission to P (Park), switch the engine off and apply the parking brake.
  3. Inspect the accelerator pedal for any interference.

If none are found and the condition persists, have your vehicle towed to an authorized Kia dealer and inspected.

Disc brakes wear indicator
When your brake pads are worn and new pads are required, you will hear a high-pitched warning sound from your front brakes or rear brakes. You may hear this sound come and go or it may occur whenever you press the brake pedal.

CAUTION
Replace brake pads
Do not continue to drive with worn brake pads. Continuing to drive with worn brake pads can damage the braking system and result in costly brake repairs.

WARNING
Brake wear
Do not ignore high pitched wear sounds from your brakes. If you ignore this audible warning, you will eventually lose braking performance, which could lead to a serious accident.

NOTICE

Brake dust may accumulate on the wheels, even under normal driving conditions. Some dust is inevitable as the brakes wear and does con-tribute to brake noise.

Check the brake warning light by turning the ENGINE START/STOP button ON (do not start the engine). This light will be illuminated when the parking brake is applied with the ENGINE START/STOP button in the START or ON position.
Before driving, be sure the parking brake is fully released and the brake warning light is off.
If the brake warning light remains on after the parking brake is released while engine is running, there may be a malfunction in the brake system. Immediate attention is necessary.
If at all possible, cease driving the vehicle immediately. If that is not possible, use extreme caution while operating the vehicle and only continue to drive the vehicle until you can reach a safe location or repair shop.

Electronic Parking Brake (EPB)

Applying the parking brake

Kia-Telluride-2022-Brake-System-User-Guide-01

Read all Instructions for Brake System User Guide

Kia Telluride 2022 Idle Stop and Go (ISG) System And Drive Mode Integrated Control System (FWD) and Drive Mode Integrated Control System (AWD) User Guide

2022 Kia Telluride Idle Stop Go System And Drive Mode System

Idle Stop and Go (ISG) system

The Idle Stop and Go (ISG) system reduces fuel consumption by automatically shutting down the engine when the vehicle is at a standstill. (For example: red light, stop sign and traffic jam)
The engine starts automatically as soon as the starting conditions are met.
The ISG is ON whenever the engine is running.

NOTICE
When the engine automatically starts by the ISG system, some warning lights (ABS, ESC, ESC OFF, EPS or Parking brake warning light) may turn on for a few seconds.
This happens because of low battery voltage. It does not mean the system has malfunctioned.

Auto stop

If you depress the brake pedal and the vehicle comes to a stop with the ISG ON, the engine will stop automatically.
Stop the vehicle completely by pressing the brake pedal when the shift lever is in the D (Drive) or N
(Neutral) position.

The engine will stop and the green AUTO STOP ( ) indicator on the instrument cluster will illuminate.
IDLE-02

NOTICE
If you open the engine hood in auto stop mode, the following will hap-pen:

  •  The ISG system will deactivate (the light on the ISG OFF button will illuminate).
  • A message will appear on the LCD display.
  • If you move the transmission lever from N to D (Manual mode) or R without depressing the brake pedal after stopping engine automatically, the engine does not restart automatically and a warn-ing chime alarms. When this hap-pens, press the brake pedal for auto start.
  • IDLE-03The drivers seatbelt is fastened.
  • The driver􀀂s door and hood are closed.
  •  The brake vacuum pressure is adequate.
  • The battery sensor is activated and the battery is sufficiently charged.
  • Outside temperature is not too low or too high.
  •  The vehicle is driven over a constant speed and stops.
  • The climate control system satisfies the conditions.
  • The vehicle is sufficiently warmed up.
  • The incline is gradual.
  • The steering wheel is turned less than 180 degrees and then the vehicle stops.

NOTICE

  • If the ISG system does not meet  the operation condition, the ISG system is deactivated. The light on the ISG OFF button and yellow
    AUTO STOP ( ) indicator on the instrument cluster will illuminate.
  •  If the light comes on continuously, please check the operation condition.

Deactivating the ISG

IDLE-05

  • If you wish to deactivate the ISG, press the ISG OFF button. The light on the ISG OFF button will illuminate.
  • If you press the ISG OFF button again, the ISG will be activated and the light on the ISG OFF but-ton will turn off.

ISG malfunction.

The ISG may not operate when:

IDLE-06

Read all Instructions for Idle Stop and Go (ISG) System And Drive Mode Integrated Control System (FWD) and Drive Mode Integrated Control System (AWD) User Guide

Kia Telluride 2022 Forward Collision-Avoidance Assist (FCA) (Sensor Fusion) and Lane Keeping Assist (LKA) User Guide

2022 Kia Telluride Forward Collision-Avoidance Assist and Lane Keeping Assist

Forward Collision-Avoidance Assist (FCA) (Sensor fusion)

Forward Collision-Avoidance Assist is designed to help detect and monitor the vehicle ahead or help detect a pedestrian or cyclist in the road-way and warn the driver that a collision is imminent with a warning message and an audible warning, and if necessary, apply emergency braking.

forward-01

NOTICE
FCA stands for Forward Collision-Avoidance Assist.

Detecting sensor

forward-02

[1]: Front view camera, [2]: Front radar
Refer to the picture above for the detailed location of the detecting sensors.

CAUTION
Take the following precautions to maintain optimal performance of the detecting sensor:

  • Never disassemble the detecting sensor or sensor assembly, or apply any impact on it.
  • If the detecting sensors have been replaced or repaired, have your vehicle inspected by an authorized Kia dealer.
  • Never install any accessories or stickers on the front windshield, or tint the front windscreen.
  • Pay extreme caution to keep the front view camera dry.
  •  Never place any reflective objects (i.e. white paper, mirror) over the dashboard. Any light reflection may prevent the function from functioning properly.
  • Do not apply license plate frame or objects, such as a bumper sticker, film or a bumper guard, near the front radar cover.
  • Always keep the front radar and cover clean and free of dirt and debris. Use only a soft cloth to wash the vehicle. Do not spray pressurized water directly on the sensor or sensor cover.
  • If unnecessary force has been applied to the radar or around the radar, Forward Collision-Avoidance Assist may not properly operate even though a warning message does not appear on the cluster. In this case, have your vehicle inspected by an authorized Kia dealer.
  • Use only genuine parts to repair or replace a damaged front radar cover. Do not apply paint to the front radar cover.

Forward Collision-Avoidance Assist Settings

Setting features Forward Safety

forward-03

With the ENGINE START/STOP but-ton in the ON position, press MODE button ( ) several times on the
steering wheel until User Settings menu appears on the LCD display. Select Driver Assistance → Forward Safety from the setting menu to set whether or not to use each function.

  • If Active Assist is selected, the function will warn the driver with a warning message, an audible warning and steering wheel vibration depending on the collision risk levels. Braking assist will be applied depending on the collision risk.
  •  If Warning Only is selected, the function will warn the driver with a warning message, an audible warning depending on the collision risk levels. Braking will not be assisted. The driver must apply the brake pedal or steer the vehicle if necessary.
  • If Off is selected, the function will off. The warning light will illuminate on the cluster.

The driver can monitor Forward Collision-Avoidance Assist ON/OFF status from the settings menu. If the warning light remains ON when  the function is ON, have the function checked by an authorized Kia dealer.

WARNING

  •  When the engine is restarted, Forward Collision-Avoidance Assist will always turn on.
  • If ‘Off’ is selected from the settings menu, the Forward Collision Assist will not operate so the driver should always be aware of the surroundings and drive safely.

CAUTION
If ‘Warning Only’ is selected, braking is not assisted.

NOTICE
Forward Collision-Avoidance Assist will turn off when ESC is turned off by pressing and holding the ESC OFF button and the will illuminate.

Read all Instructions for forwarding Collision-Avoidance Assist (FCA) (Sensor Fusion) and Lane Keeping Assist (LKA) User Guide

Kia Telluride 2022 Blind-Spot Collision-Avoidance Assist (BCA) User Guide

2022 Kia Telluride Blind-Spot Collision-Avoidance Assist Instructions

Blind-Spot Collision-Avoidance Assist (BCA)

Blind-Spot Collision-Avoidance Assist is designed to help detect and monitor approaching vehicles in the drivers blind spot area and warn the driver of a possible collision with a warning message and audible warning.
In addition, if there is a risk of collision when changing lanes or driving forward out of a parking space, Blind-Spot Collision-Avoidance Assist will help avoid collision by applying the brake.

Kia-Telluride-2022-Blind-Spot-Collision-Avoidance-Assist-(BCA)-User-Guide-01

Blind-Spot Collision-Avoidance Assist help detects and informs the driver that a vehicle is in the blind spot.

CAUTION
The detecting range may vary depending on the speed of your vehicle. However, even if there is a vehicle in the blind spot, Blind-Spot Collision-Avoidance Assist may not warn you when you pass by at high speeds.

Kia-Telluride-2022-Blind-Spot-Collision-Avoidance-Assist-(BCA)-User-Guide-02

Blind-Spot Collision-Avoidance Assist helps detect and inform the driver that a vehicle is approaching at high speed from the blind spot area.

CAUTION
Warning timing may vary depending on the speed of the vehicle approaching at high speed.

Kia-Telluride-2022-Blind-Spot-Collision-Avoidance-Assist-(BCA)-User-Guide-03

When changing lanes by detecting the lane ahead, if Blind-Spot Collision-Avoidance Assist judges that there is a collision risk with an approaching vehicle in the blind spot, it will help avoid collision by applying the differential brake.

NOTICE
BCA stands for Blind-Spot Collision-Avoidance Assist.

Detecting sensor

Kia-Telluride-2022-Blind-Spot-Collision-Avoidance-Assist-(BCA)-User-Guide-04

Kia-Telluride-2022-Blind-Spot-Collision-Avoidance-Assist-(BCA)-User-Guide-05

[1] : Front view camera, [2] : Rear corner radar Refer to the picture above for the detailed location of the detecting sensors.

CAUTION
Take the following precautions to maintain optimal performance of the detecting sensor:

  • Never disassemble the rear corner radar or radar assembly, or apply any impact on it.
  •  If there is impact on the rear corner radar or near the radar, even though the warning message does not appear on the cluster, Blind-Spot Collision-Avoidance Assist may not operate properly. In this case, have your vehicle inspected by an authorized Kia dealer.
  •  If the rear corner radars have been replaced or repaired, have your vehicle inspected by an authorized Kia dealer.
  •  Use only genuine parts to repair the rear bumper where the rear corner radar is located.
  •  Do not apply license plate frame or objects, such as a bumper sticker, film or a bumper guard near the rear corner radar.
  •  The function may not work properly if the bumper has been replaced, or the surroundings of the rear corner radar has been damaged or paint has been applied.
  • If a trailer, carrier, etc. is installed, V

For more details on the precautions of the front view camera, refer to “Forward Collision-Avoidance Assist (FCA) (Sensor fusion)” 

Blind-Spot Collision-Avoidance Assist Settings

Setting features
Blind-Spot Safety

Kia-Telluride-2022-Blind-Spot-Collision-Avoidance-Assist-(BCA)-User-Guide-06

With the ENGINE START/STOP but-ton in the ON position, press MODE
button ( ) several times on the
steering wheel until User Settings menu appears on the LCD display. Select Driver Assistance → Blind-Spot Safety from the setting menu to set whether or not to use each function.

  •  If Active Assist is selected, Blind- Spot Collision-Avoidance Assist will warn the driver with a warning message, an audible warning and braking assist will be applied depending on the collision risk levels.
  •  If Warning Only is selected, Blind-Spot Collision-Avoidance Assist will warn the driver with a warning message, an audible warning depending on the collision risk levels. Braking will not be assisted.
  • If Off is selected, Blind-Spot Collision-Avoidance Assist will turn off.

If you change the setting from Off to Active Assist or Warning Only, the warning light on the side view mirror (outside mirror) will blink for approximately 3 seconds.
In addition, if the engine is turned on, when the function is set to Active Assist or Warning Only, the warning light on the side view mirror (outside mirror) will blink for approximately 3 seconds.

Read all Instructions for Blind-Spot Collision-Avoidance Assist (BCA) User Guide

Kia Telluride 2022 Driver Attention Warning (DAW) User Guide

2022 Kia Telluride Driver Attention Warning (DAW) Guidelines

Driver Attention Warning (DAW)

Driver Attention Warning will deter-mine the driver’s attention level by analyzing driving pattern, driving time, etc. while driving. Driver Attention Warning will recommend a break when the driver’s attention level falls below a certain level to help drive safely.

Leading vehicle departure alert
Leading vehicle departure alert will inform the driver when the front vehicle departs from a stop.

NOTICE
DAW stands for Driver Attention Warning.

Detecting sensor

Kia-Telluride-2022-Driver-Attention-Warning-(DAW)-User-Guide-01

[1]: Front view camera
The front view camera is used as a detecting sensor to detect driving patterns and front vehicle departure while vehicle is being driven.
Refer to the picture above for the detailed location of the detecting sensor.

CAUTION
Always keep the front view camera in good condition to maintain opti-mal performance of Driver Attention Warning.
For more details on the precautions of the front view camera, refer to “Forward Collision-Avoidance Assist (FCA) (Sensor fusion)”

 Driver Attention Warning Settings

Setting features
Driver Attention Warning

Kia-Telluride-2022-Driver-Attention-Warning-(DAW)-User-Guide-02

  •  With the ENGINE START/STOP  button in the ON position, press MODE button  several times on the steering wheel until User Settings menu appears on the LCD display. Select Driver Assistance → Driver Attention Warning from the setting menu to set whether or not to use each function.
  •  If Low Activity Warning is selected, the function will inform the driver the driver’s attention level and will recommend taking a break when the level falls below a certain level.

Leading vehicle departure alert

Kia-Telluride-2022-Driver-Attention-Warning-(DAW)-User-Guide-03

If Leading vehicle departure alert is selected from Driver Assistance → Driving Assist, the function will inform the driver when the front vehicle departs from a stop.

Warning Timing

Kia-Telluride-2022-Driver-Attention-Warning-(DAW)-User-Guide-04

With the ENGINE START/STOP but-ton in the ON position, press MODE button several times on the steering wheel until User Settings menu appears on the LCD display. Select Driver Assistance → Warning Timing to change the initial warning activation time for Driver Attention Warning.
When the vehicle is first delivered, warning timing is set to ‘Normal’. If you change the warning timing, the warning time of other Driver Assis-tance system may change.

NOTICE
If the engine is restarted, Driver Attention Warning will maintain the last setting.

Driver Attention Warning Operation

Basic function
Display and warning
The basic function of Driver Attention Warning is to inform the driver the ‘Attention Level’ and to warn the driver ‘Consider taking a break’.

Read all Instructions for Driver Attention Warning (DAW) User Guide

Kia Telluride 2022 Smart Cruise Control (SCC) User Guide

2022 Kia Telluride Smart Cruise Control (SCC) Guidelines

Smart Cruise Control (SCC)

Smart Cruise Control allows you to program the vehicle to maintain constant speed and distance detecting the vehicle ahead without depressing the accelerator or brake pedal

Detecting sensor

smart cruise-01

[1]: Front view camera, [2]: Front radar
The front view camera and front radar are used as a detecting sensor to detect front vehicles.
Refer to the picture above for the detailed location of the detecting sensor.

CAUTION
Always keep the front view camera and front radar in good condition to maintain optimal performance of Smart Cruise Control.
For more details on the precautions of the front view camera and front radar, refer to “Forward Collision-Avoidance Assist (FCA) (Sensor fusion)” 

Smart Cruise Control Settings Setting features

To turn on Smart Cruise Control

smart cruise-02

  1. Press the Driving Assist button, to turn the function on. The CRUISE indicator in the instrument cluster will illuminate.
  2. Accelerate to the desired speed. The set speed can be set as follows:
    •  20 mph (30 km/h) ~ 100 mp
  3. Push the SET- switch down, and release it at the desired speed. The set speed and vehicle to vehicle distance on the LCD screen will illuminate.
    smart cruise-03
  4. Release the accelerator pedal. The desired speed will automatically be maintained. If there is a vehicle in front of you, the speed may decrease to maintain the distance to the vehicle ahead. On a steep grade, the vehicle may slow down or speed up slightly while going uphill or downhill.

NOTICE
Vehicle speed may decrease on an upward slope and increase on a downward slope.

To set vehicle distance

smart cruise-04

Each time the vehicle distance but-ton is pressed, the vehicle distance changes as follows:

NOTICE

  • If you drive at 56 mph (90 km/h),  the distance is maintained as follows:
    • Distance 4 – approximately 172 ft. (52.5 m)
    • Distance 3 – approximately 130 ft. (40 m)
    • Distance 2 – approximately 106 ft. (32.5 m)
    • Distance 1 – approximately 82 ft. (25 m)
  •  The distance is set to the last set distance when the engine is restarted, or when Smart Cruise Control was temporarily canceled.

To increase speed

smart cruise-05

  •  Push the RES+ switch up, and release it immediately. The cruising speed will increase by 1 mph (1 km/h) each time the switch is operated in this manner.
  • Push the RES+ switch up, and hold it while monitoring the set speed on the cluster. The cruising speed will increase by 5 mph or 10 km/h each time act the switch is operated in this manner. Release the switch when the desired speed is shown, and the vehicle will accelerate to that speed. You can set the speed to 100 mph (160 km/h).

WARNING
Check the driving condition before using the RES+ switch. Driving speed may sharply increase when you push up and hold the RES+ switch.

Read all Instructions for Smart Cruise Control (SCC) User Guide

Kia Telluride 2022 Navigation-Based Smart Cruise Control (NSCC) and Lane Following Assist (LFA) User Guide

2022 Kia Telluride Navigation-Based Smart Cruise Control and Lane Following Assist

Navigation-based Smart Cruise Control (NSCC)

Navigation-based Smart Cruise Control will help automatically adjust vehicle speed when driving on highways (or motorways) with speed limits by using road information from the navigation system while Smart Cruise Control is operating.

NOTICE

  • Navigation-based Smart Cruise  Control is available only on con-trolled access road of certain highways.
  • * Controlled access road indicates roads with limited entrances and exits that allow uninterrupted high speed traffic flow. Only passenger cars and motor-cycles are allowed on controlled access roads.
  •  Additional highways may be expanded by future navigation updates.

NOTICE
Navigation-based Smart Cruise Control operates on main roads of highways (or motorways), and does not operate on interchanges or junctions.

Highway Auto Curve Slowdown
If vehicle speed is high, Highway Auto Curve Slowdown function will temporarily decelerate your vehicle to help you drive safely on a curve, based on the curve information from the navigation.

Navigation-based Smart Cruise Control Settings

Setting features

Kia-Telluride-2022-Navigation-Based-Smart-Cruise-Control-(NSCC)-and-Lane-Following-Assist-(LFA)-User Guide-01

 

Highway Auto Curve Slowdown

  • With the ENGINE START/STOP button in the ON position, press MODE button ( ) several times on the steering wheel until User Settings menu appears on the
    LCD display. Select Driver Assistance → Driving Assist → Highway Auto Curve Slowdown from the setting menu to set whether or not to use each function.

NOTICE
When there is a problem with Navigation-based Smart Cruise Control, the function cannot be set from the settings menu.

Navigation-based Smart Cruise Control Operation

Operating conditions
Navigation-based Smart Cruise Control is ready to operate if all of the following conditions are satisfied:

  • Smart Cruise Control is operating
  • Driving on main roads of highways (or motorways)

NOTICE
For more details on how to operate Smart Cruise Control, refer to “Smart Cruise Control (SCC)”

Display and control
When Navigation-based Smart Cruise Control operates, it will be displayed on the cluster as follows:

Navigation-based Smart Cruise Control standby

Kia-Telluride-2022-Navigation-Based-Smart-Cruise-Control-(NSCC)-and-Lane-Following-Assist-(LFA)-User Guide-13

If the operating conditions are satisfied, the white ( ) symbol will illuminate.

Navigation-based Smart Cruise Control operating

Kia-Telluride-2022-Navigation-Based-Smart-Cruise-Control-(NSCC)-and-Lane-Following-Assist-(LFA)-User Guide-02

If temporary deceleration is required in the standby state and Navigation-based Smart Cruise Control is operating, the green ) symbol will illuminate on the  cluster.

WARNING
‘Drive carefully’ warning message will appear in the following circumstances:

  • Navigation-based Smart Cruise Control is not able to slow down your vehicle to a safe speed.

NOTICE
Highway Auto Curve Slowdown uses the same ( ) symbol.

Highway Auto Curve Slowdown

  • Depending on the curve ahead on the highway (or motorway), the vehicle will decelerate, and after passing the curve, the vehicle will accelerate to Smart Cruise Control set speed.
  •  Vehicle deceleration time may differ depending on the vehicle speed and the degree of the curve on the road. The higher the driving speed, the faster the vehicle will decelerate.

Limitations of Navigation-based Smart Cruise Control
Navigation-based Smart Cruise Control may not operate normally under the following circumstances:

  • The navigation is not working properly.
  •  The navigation is not updated to include the latest information about road curvature and changes.
  •  Speed limit and road information in the navigation is not updated
  • The map information and the actual road is different because of real-time GPS data or map information error
  •  The navigation searches for a route while driving
  • GPS signals are blocked in areas such as a tunnel
  • A road that divides into two or more roads and joins again
  • The driver goes off course the route set in the navigation
  •  The route to the destination is changed or canceled by resetting the navigation (including TPEG change)
  •  The navigation cannot detect the current vehicle position (ex: elevated roads including overpass adjacent to general roads or nearby roads exist in a parallel way)
  •  The vehicle enters a service station or rest area
  •  The speed limit of some sections changes depending on the road situations
  •  Android Auto or Car Play is operating
  •  The navigation is being updated v
  •  The navigation is being restarted while driving

Kia-Telluride-2022-Navigation-Based-Smart-Cruise-Control-(NSCC)-and-Lane-Following-Assist-(LFA)-User Guide-04

[1]: Driving route, [2]: Set route, [3]: Main road, [4]: Branch line

  • between the navigation set route (branch line) and the driving route (main road), Highway Auto Curve Slowdown function may not operate until the driving route is recognized as the main road.
  • When there is a difference recognized as the main road by maintaining the main road instead of the navigation set route, High-way Auto Curve Slowdown func-tion will operate. Depending on the distance to the curve and the current vehicle speed, vehicle deceleration may not be sufficient or may decelerate rapidly.

Kia-Telluride-2022-Navigation-Based-Smart-Cruise-Control-(NSCC)-and-Lane-Following-Assist-(LFA)-User Guide-05

[1]: Driving route, [2]: Main road, [3]: Set route, [4]: Branch line

Read all Instructions for Navigation-Based Smart Cruise Control (NSCC) and Lane Following Assist (LFA) User Guide

Kia Telluride 2022 Highway Driving Assist (HDA) User Guide

2022 Kia Telluride Highway Driving Assist (HDA) Guidelines

Highway Driving Assist (HDA)

Highway Driving Assist is designed to control the vehicle distance and speed when driving on the highway. The function assists drivers by receiving information about speed limit of the highway that the vehicle is on and automatically changing the set speed of Smart Cruise Control when it is needed.

WARNING

  •  Highway Driving Assist is not a  substitute for safe driving practices, but a convenience function. It is the responsibility of the driver to always be aware of the surroundings and drive safely.
  •  Highway Driving Assist relies entirely on the road information provided by the Infotainment System. It is the responsibility of the driver to follow traffic laws and avoid accidents.
  •  For your safety, please read the owner’s manual before using the function.

Detecting sensor

Kia-Telluride-2022-Highway-Driving-Assist-(HDA)-User-Guide-01

Kia-Telluride-2022-Highway-Driving-Assist-(HDA)-User-Guide-01

[1] : Front view camera, [2]: Front radar
Refer to the picture above for the detailed location of the detecting sensors.

CAUTION
For more details on the precautions of the detecting sensors, refer to “Forward Collision-Avoidance Assist (FCA) (Sensor fusion)”

NOTICE

  • Highway Driving Assist is available only on controlled access road of certain highways.
  • * Controlled access road indicates roads with limited entrances and exits that allow uninterrupted high speed traffic flow. Only passenger cars, truck and motorcycles are allowed on con-trolled access roads.

Available highway 

USA, CANADA Controlled access road

  • Additional highways may be  expanded by future navigation updates.

Highway Driving Assist Settings

Setting features

Kia-Telluride-2022-Highway-Driving-Assist-(HDA)-User-Guide-03

With the ENGINE START/STOP but-ton in the ON position, press MODE
button ( ) several times on the steering wheel until User Settings menu appears on the LCD display. Select Driver Assistance → Driving Assist → Highway Driving Assist􀀂 from the setting menu to set whether or not to use each function.
The set-up of Highway Driving Assist will be maintained, as selected, when the engine is re-started.

Operating conditions

If you activate Highway Driving Assist in the instrument cluster and the following conditions are met, Highway Driving Assist will be ready to operate, and the indicator light
will come on green in the cluster.

  • When driving on the highway main line.
  •  When Smart Cruise Control is in  operation (Vehicle deceleration and acceleration control)
    • Refer to “Smart Cruise Control (SCC)”
    • If Smart Cruise Control is in standby mode (Smart Cruise Control is on but speed is not set), Highway Driving Assist will be in the same mode. The white indicator light will be turned on.
  •  When the vehicle speed is below 95 mph (153 km/h)

Highway Driving Assist Operation

The speed is automatically set in accordance with the steering control and the highway speed limit when all the operating conditions are met.

Read all Instructions for Highway Driving Assist (HDA) User Guide

Kia Telluride 2022 Rear Cross-Traffic Collision-Avoidance Assist (RCCA) User Guide

2022 Kia Telluride Rear Cross-Traffic Collision-Avoidance Assist Instructions

Rear Cross-Traffic Collision-Avoidance Assist (RCCA)

Rear Cross-Traffic Collision-Avoidance Assist is designed to detect vehicles approaching from the left and right side while your vehicle is reversing, and warning the driver that a collision is imminent with a warning message and an audible warning. Also, to help prevent collision braking assist is applied.
rear-01

[A]: Rear Cross-Traffic Collision Warning operating range
[B]: Rear Cross-Traffic Collision-Avoidance Assist operating range

CAUTION
The time of warning may vary depending on vehicle speed of the approaching vehicle.

Detecting sensor

rear-02

[1]: Rear corner radar
Refer to the picture above for the detailed location of the detecting sensor.

CAUTION
For more details on the precautions of the rear corner radar, refer to “Blind-Spot Collision-Avoidance Assist (BCA)” 

Rear Cross-Traffic Collision-Avoid-ance Assist Settings

Setting features
Rear Cross-Traffic Safety

rear-03

With the ENGINE START/STOP but-ton in the ON position, press MODE
button ( ) several times on the
steering wheel until User Settings menu appears on the LCD display. Select Driver Assistance → Parking Safety → Rear Cross-Traffic Safety from the setting menu to set whether or not to use each function.

WARNING
When the engine is restarted, Rear Cross-Traffic Collision-Avoidance Assist will always turn on. However, if ‘Off’ is selected after the engine is restarted, the driver should always be aware of the surroundings and drive safely.

NOTICE
Settings for Rear Cross-Traffic Safety system include Rear Cross-Traffic Collision Warning and Rear Cross-Traffic Collision-Avoidance Assist.

NOTICE
If the engine is restarted, Warning Timing and Warning Volume will maintain the last setting.

Warning Timing

rear-04

With the ENGINE START/STOP but-ton in the ON position, press MODE
button ( ) several times on the
steering wheel until User Settings menu appears on the LCD display. Select Driver Assistance → Warning Timing to change the initial warning activation time for Rear Cross-Traffic Collision-Avoidance Assist.

When the vehicle is first delivered, warning timing is set to Normal. If you change the warning timing, the warning time of other Driver Assisance system may change.
Always be aware before changing the warning timing.
Warning Volume

rear-05

With the ENGINE START/STOP but-ton in the ON position, press MODE
button ( ) several times on the steering wheel until User Settings menu appears on the LCD display. Select Driver Assistance → Warning Volume to change the warning volume to High, Medium, Low or Offord Rear Cross-Traffic Collision-Avoidance Assist.
If you change the Warning Volume, the Warning Volume of other Driver Assistance system may change.

CAUTION

  • The setting of the Warning Timing and Warning Volume applies to all functions of Rear Cross-Traffic Collision-Avoidance Assist.
  •  Even though Normal is selected for Warning Timing, if the vehicles from the left and right side approaches at high speed, the initial warning activation time may seem late.
  • Select Late for Warning Timing when traffic is light and when driving speed is slow.

Rear Cross-Traffic Collision-Avoidance Assist Operation

Warning and control
Rear Cross-Traffic Collision-Avoidance Assist will warning and control the vehicle depending on collision level: ‘Collision Warning’, ‘Emergency Braking’.

Collision Warning

Left

rear-06

Right

Read all Instructions for Rear Cross-Traffic Collision-Avoidance Assist (RCCA) User Guide

Kia Telluride 2022 Declaration of Conformity and Economical Operation User Guide

2022 Kia Telluride Declaration of Conformity and Economical Operation

Declaration of conformity

 The radio frequency components (Front radar) complies:

For Korea
Kia-Telluride-2022-Declaration-of-Conformity-and-Economical-Operation-User-Guide-01

For United States and American terri-tories, Micronesia, Dominican Republic, Honduras

Kia-Telluride-2022-Declaration-of-Conformity-and-Economical-Operation-User-Guide-02

Kia-Telluride-2022-Declaration-of-Conformity-and-Economical-Operation-User-Guide-03

Europe and countries subject to CE certification Kia-Telluride-2022-Declaration-of-Conformity-and-Economical-Operation-User-Guide-04 Kia-Telluride-2022-Declaration-of-Conformity-and-Economical-Operation-User-Guide-05

For Canada

Kia-Telluride-2022-Declaration-of-Conformity-and-Economical-Operation-User-Guide-05

For Taiwan Kia-Telluride-2022-Declaration-of-Conformity-and-Economical-Operation-User-Guide-06 Kia-Telluride-2022-Declaration-of-Conformity-and-Economical-Operation-User-Guide-07

For Australia

Kia-Telluride-2022-Declaration-of-Conformity-and-Economical-Operation-User-Guide-08

For Serbia Kia-Telluride-2022-Declaration-of-Conformity-and-Economical-Operation-User-Guide-09

Read all Instructions for Declaration of Conformity and Economical Operation User Guide

Kia Telluride 2022 Special Driving Conditions, Winter Driving and Trailer Towing User Guide

2022 Kia Telluride Driving Conditions, Winter Driving and Trailer Towing Guidelines

Special driving conditions

If driving conditions deteriorate due to poor weather or road conditions, you should pay even more attention than usual to your driving.
Hazardous driving conditions
When hazardous driving conditions are encountered such as water, snow, ice, mud, sand, or similar hazards, follow these suggestions:

  • Drive cautiously and allow extra distance for braking.
  • Avoid sudden braking or steering.
  • When braking with non-ABS brakes pump the brake pedal with a light up-and-down motion until the vehicle is stopped.
  •  Do not pump the brake pedal on a vehicle equipped with ABS.
  • If stalled in snow, mud, or sand, use the second gear. Accelerate slowly to avoid spinning the drive wheels.
  • Use sand, rock salt, or other nonslip material under the drive wheels to provide traction when stalled in ice, snow, or mud.

Reducing the risk of a rollover
This multi-purpose passenger vehicle is defined as a Sports Utility Vehicle (SUV). Utility vehicles have a significantly higher rollover rate than other types of vehicles. SUV’s have higher ground clearance and a narrower track to make them capable of performing in a wide variety of off-road applications.
Specific design characteristics give them a higher center of gravity than ordinary vehicles. An advantage of the higher ground clearance is a better view of the road, which allows you to anticipate problems.
They are not designed for cornering at the same speeds as conventional passenger vehicles, any more than low-slung sports vehicles are designed to perform satisfactorily in off-road conditions. Due to this risk, driver and passengers are strongly recommended to buckle their seat belts.
In a rollover crash, an unbelted per-son is significantly more likely to die than a person wearing a seat belt. There are steps that a driver can make to reduce the risk of a rollover.
If at all possible, avoid sharp turns or abrupt maneuvers, do not load your roof rack with heavy cargo, and never modify your vehicle in any way.

WARNING
Rollover
As with other Sports Utility Vehicle (SUV), failure to operate this vehicle correctly may result in loss of con-trol, an accident or vehicle rollover.

  • Utility vehicles have a significantly higher rollover rate than other types of vehicles.
  • Specific design characteristics  (higher ground clearance, narrower track, etc.) give this vehicle a higher center of gravity than ordinary vehicles.
  • A SUV is not designed for cornering at the same speeds as conventional vehicles.
  • Avoid sharp turns or abrupt maneuvers.
  • In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a seat belt. Make sure everyone in the vehicle is properly buckled up.

WARNING
Your vehicle is equipped with tires designed to provide safe ride and handling capability. Do not use tires and wheels that are different in size and type from the originally installed ones. It can affect the safety and performance of your vehicle, which could lead to steering failure or rollover and serious injury. When replacing the tires, be sure to equip all four tires with the tire and wheel of the same size, type, tread, brand and load-carrying capacity.

Rocking the vehicle
If it is necessary to rock the vehicle to free it from snow, sand, or mud, first turn the steering wheel right and left to clear the area around your front wheels. Then, shift back and forth between R (Reverse) and any forward gear.
Do not race the vehicle, and spin the wheels as little as possible. If you are still stuck after a few tries, have the vehicle pulled out by a tow vehicle to avoid vehicle overheating and possible damage to the reduction gear.

WARNING
Sudden Vehicle Movement
Do not attempt to rock the vehicle if people or objects are nearby. The vehicle may suddenly move forward or backwards as it becomes unstuck.

CAUTION
Vehicle rocking
Prolonged rocking may cause vehicle overheating, reduction gear dam-age or failure, and tire damage.

CAUTION
Spinning tires
Do not spin the wheels, especially at speeds more than 35 mph (56 km/ h). Spinning the wheels at high speeds when the vehicle is stationary could overheat and damage tires, and the rotating wheels may fly away and injure bystanders.

The Electronic Stability Control
(ESC) should be turned OFF prior to rocking the vehicle.
Smooth cornering
Avoid braking or gear changing in corners, especially when roads are wet. Ideally, corners should always be taken under gentle acceleration. If you follow these suggestions, tire wear will be held to a minimum.

Read all Instructions for Special Driving Conditions, Winter Driving and Trailer Towing User Guide

Kia Telluride 2022 Vehicle Load Limit and Vehicle Weight User Guide

2022 Kia Telluride Vehicle Load Limit and Weight Guidelines

Kia Telluride 2022 If You Have a Flat Tire (with Spare Tire) and Towing User Guide

 

2022 Kia Telluride Engine Compartment And Maintenance Services Instructions

Engine compartment

Open the hood to see the engine compartment.

(Gasoline) 3.8 GDi

ENGINE-01

The actual engine cover in the vehicle may differ from the illustration.

  1. Engine coolant reservoir
  2. Engine oil filler cap
  3. Brake fluid reservoir
  4. Air cleaner
  5. Fuse box
  6. Negative battery terminal
  7. Positive battery terminal
  8. Engine oil dipstick
  9. Radiator cap.
  10.  Windshield washer fluid reservoir

Maintenance services

You should exercise the utmost care to prevent damage to your vehicle and injury to yourself whenever performing any maintenance or inspection procedures.
Should you have any doubts concerning the inspection or servicing of your vehicle, we strongly recom-mend that you have an authorized Kia dealer perform this work.
An authorized Kia dealer has factory-trained technicians and genuine Kia parts to service your vehicle properly. For expert advice and quality service, see an authorized Kia dealer.
Inadequate, incomplete or insufficient servicing may result in operational problems with your vehicle that could lead to vehicle damage, an accident, or personal injury.

Owner’s responsibility.

NOTICE
Maintenance Service and Record Retention are the owner’s responsibility.
You should retain documents that show proper maintenance has been performed on your vehicle in accordance with the scheduled maintenance service charts shown on the following pages. You need this information to establish your compliance with the servicing and maintenance requirements of your vehicle warranties.
Detailed warranty information is provided in your Warranty & Consumer Information manual.

Repairs and adjustments required as a result of improper maintenance or a lack of required maintenance are not covered.
We recommend you have your vehicle maintained and repaired by an authorized Kia dealer. Authorized Kia dealers meet Kia’s high service quality standards and receive technical support from Kia in order to provide you with a high level of service satisfaction.

NOTICE
NHTSA Safety Corrosion Alert
The National Highway Traffic Safety Administration (NHTSA) has issued a general warning to all vehicle owners of all brands regarding the risks associated with vehicle underbody corrosion. From your initial purchase, take the following steps to prevent unsafe corrosion damage to your vehicle:

  • Wash the undercarriage of your vehicle regularly during the winter and whenever your vehicle has  been exposed to such salts or chemicals.
  • Do a thorough washing of the  undercarriage at the end of the winter.
  • Use professional service technicians or governmental inspection stations to annually inspect for corrosion.
  • Immediately seek an inspection of your vehicle if you become visually aware of corrosion flaking or scaling or if you become aware of a change in vehicle performance, such as soft or spongy brakes, fluids leaking, impairment of directional control, suspension noises or rattling metal straps.
  • NHTSA further advises that after a vehicle is 7 years old, it is essential that you take these indicated maintenance steps to ensure that you protect yourself from unsafe corrosion conditions.

Owner maintenance precautions

Improper or incomplete service may result in problems. This section gives instructions only for the maintenance items that are easy to per-form.
As explained earlier in this section, several procedures can be done only by an authorized Kia dealer with special tools.

Read all Instructions for Engine Compartment, Maintenance Services, Owner Maintenance and Scheduled Maintenance Service User Guide

Kia Telluride 2022 Washer Fluid, Air Cleaner Filter and Climate Control Air Filter And Wiper Blades, Battery and Tires and Wheels User Guide

2022 Kia Telluride Washer Fluid, Air Filters, Tires And Wheels Guidelines

Washer Fluid, Air Cleaner Filter and Climate Control Air Filter

Washer fluid

Washer fluid is used when wiping the windshield of the vehicle with a windshield wiper. You should check and refill washer fluid periodically to make sure that it doesn’t run out.

Checking the washer fluid level

washer-01

The reservoir is translucent so that you can check the level with a quick visual inspection.

  • Check the fluid level in the washer fluid reservoir and add fluid if necessary. Plain water may be used if washer fluid is not avail-able. However, use washer solvent with antifreeze characteristics in cold climates to prevent freezing.

WARNING
Flammable Fluid
Do not allow the washer fluid to come in contact with open flames or sparks. The windshield washer fluid reservoir is flammable under certain circumstances. This can result in a fire.

WARNING
Coolant

  • Do not use radiator coolant or antifreeze in the washer fluid reservoir.
  • Radiator coolant can severely obscure visibility when sprayed on the windshield and may cause loss of vehicle control.
    obscure visibility when sprayed on the windshield and may cause loss of vehicle control.

WARNING
Windshield fluid
Do not drink the windshield washer fluid. The windshield washer fluid is poisonous to humans and animals.

Air cleaner filter

A Genuine Kia air cleaner filter is recommended when the filter is replaced.

Replacing air cleaner filter

Air cleaner filter must be replaced when necessary, and should not be washed.

air-conditional-01

You can clean the filter when inspecting the air cleaner compart-ment. Clean the filter by using com-pressed air.

  1. Pull out the air cleaner cover.
    air-conditional-02
  2. Unlock by turning the locking lever downward.
    air-conditional-03
  3. Pull the air cleaner filter to replace.
  4.  Lock the cover with the reverse order.

Replace the filter according to the Maintenance Schedule.
If the vehicle is operated in extremely dusty or sandy areas, replace the element more often than the usual recommended intervals. (Refer to “Maintenance Under Severe Usage Conditions – Non Turbo Models”

CAUTION
Air filter maintenance

  • Do not drive with the air cleaner removed; this will result in excessive engine wear.
  • When removing the air cleaner filter, be careful that dust or dirt does not enter the air intake, or damage may result.
  • Use a Kia genuine part. Use of a non-genuine part could damage the air flow sensor.

Read all Instructions for Washer Fluid, Air Cleaner Filter and Climate Control Air Filter And Wiper Blades, Battery and Tires and Wheels User Guide

Kia Telluride 2022 Fuses User Guide

2022 Kia Telluride Fuses And Fuse Box Guidelines

Fuses

A vehicle’s electrical system is protected from electrical overload damage by fuses.

Blade type

fuses-01

Cartridge type

fuses-02

Multi fuse

fuses-03

BFT

fuses-04

* Left side: Normal, Right side:
Blown

This vehicle has 2 (or 3) fuse panels, one located in the driver’s side panel bolster, the other in the engine compartment near the battery.
If any of your vehicle’s lights, accessories, or controls do not work, check the appropriate circuit fuse. If a fuse has blown, the element inside the fuse will melt.
If the electrical system does not work, first check the driver’s side fuse panel.
If the replacement fuse blows, this indicates an electrical problem. Avoid using the system involved and immediately consult an authorized Kia dealer.
Three kinds of fuses are used: blade type for lower amperage rating, cartridge type, and multi fuse for higher amperage ratings.

WARNING
Fuse replacement

  • Never replace a fuse with anything but another fuse of the same rating.
  • A higher capacity fuse could cause damage and possibly a fire.
  • Never install a wire or aluminum foil instead of the proper fuse – even as a temporary repair. It may cause extensive wiring dam-age and a possible fire.
  • Do not arbitrarily modify or add-on electric wiring to the vehicle.

NOTICE

  • When replacing a fuse, Turn  ENGINE START/STOP button to the OFF position and turn off switches of all electrical devices then remove battery (-) terminal.
  • The actual fuse/relay panel label may differ from equipped items.

WARNING 
Electrical Fire
Always ensure replacements fuses and relays are securely fastened when installed. Failure to do so can result in a vehicle fire.
Do not remove fuses, relays and terminals fastened with bolts or nuts. The fuses, relays and terminals may be fastened incompletely, and it may cause a possible fire. If fuses, relays and terminals fastened with bolts or nuts are blown, we recommend that you consult with an authorized Kia dealer.

CAUTION
When replacing a blown fuse or relay, make sure the new fuse or relay fits tightly into the clips. Failure to tightly install the fuse or relay may cause damage to the wiring and electric systems.

CAUTION

  •  Do not input any other objects  except fuses or relays into fuse/relay terminals such as a screw-driver or wiring. It may cause con-tact failure and system malfunction.
  • 􀀁 Do not plug in screwdrivers or aftermarket wiring into the terminal originally designed for fuse and relays only. The electrical system and wiring of the vehicle interior may be damaged or burned due to contact failure.
  • If you directly connect the wire on the taillight or replace the bulb which is over the regulated capacity to install trailers etc., the inner junction block can get burned.

WARNING
Electrical wiring repairs
All electrical repairs should be per-formed by authorized Kia dealer-ships using approved Kia parts. Using other wiring components, especially when retrofitting multi-media or theft alarm system, car phone or radio may cause vehicle damage and increase the risk of a vehicle fire.

Read all Instructions for Fuses User Guide

Kia Telluride 2022 Light Bulbs User Guide

2022 Kia Telluride Washer Fluid, Air Filters, Tires And Wheels Guidelines

FAQ

What is the 2022 Kia Telluride?

The 2022 Kia Telluride is a midsize SUV known for its spacious interior, comfortable ride, and numerous standard features.

How many trim levels are available for the 2022 Telluride?

The 2022 Telluride typically offers multiple trim levels, including LX, S, EX, and SX, each with various features and options.

What is the seating capacity of the 2022 Telluride?

The 2022 Telluride typically seats up to eight passengers with its standard second-row bench seat or seven passengers with available second-row captain’s chairs.

What is the cargo capacity of the 2022 Telluride?

The Telluride typically offers a generous cargo capacity, with around 21 cubic feet of space behind the third row and up to 87 cubic feet with the rear seats folded down.

What engine options are available for the 2022 Telluride?

The 2022 Telluride typically comes with a 3.8-liter V6 engine that produces around 291 horsepower and 262 lb-ft of torque.

Is the 2022 Telluride available with all-wheel drive (AWD)?

Yes, the 2022 Telluride typically offers an optional all-wheel-drive (AWD) system for enhanced traction and control

What is the towing capacity of the 2022 Telluride?

The 2022 Telluride typically has a towing capacity of up to 5,000 pounds when properly equipped, making it suitable for towing trailers and boats.

What is the fuel efficiency of the 2022 Telluride?

The fuel efficiency can vary depending on the trim level and whether you choose front-wheel drive (FWD) or all-wheel drive (AWD), but it typically ranges from 19 to 21 miles per gallon in the city and 24 to 29 miles per gallon on the highway.

What advanced safety features are included in the 2022 Telluride?

The 2022 Telluride often includes advanced safety features like forward collision warning, automatic emergency braking, adaptive cruise control, blind-spot monitoring, and more.

Is there a panoramic sunroof available for the 2022 Telluride?

Yes, the 2022 Telluride typically offers an available panoramic sunroof, which adds to the spacious and airy feel of the cabin.

What type of infotainment system does the 2022 Telluride have?

The 2022 Telluride typically features an infotainment system with a touchscreen display, smartphone integration, and available navigation.

Does the 2022 Telluride have a hands-free power liftgate?

Some trim levels of the 2022 Telluride offer a hands-free power liftgate, making it convenient to access the rear cargo area.

What is the starting price of the 2022 Kia Telluride?

The starting price of the 2022 Telluride varies depending on the trim level and options chosen but typically falls in the midsize SUV price range.

Is the 2022 Telluride known for its reliability?

The Kia Telluride has earned a reputation for reliability and has received high marks in various automotive reviews and reliability studies.

Useful Link

2022 Kia Stinger User Guide
Kia Optima 2019 User Manual
Download Manuals: https://owners.kia.com/content/owners/en/manuals.html

Leave a Reply

Your email address will not be published. Required fields are marked *