2025 Lexus ES350 LCD Display User Guide
We will examine the characteristics and capabilities of the 2025 Lexus ES350 LCD display in this tutorial. Discover how the smooth navigation, simple controls, and enhanced clarity of this state-of-the-art technology improve your driving experience.
2023 – 2024 Lexus RX Review, Specs, Pricing and Mileage (Brochure)
Video: 2025 Lexus ES350 Display Warning Lights
Lexus Meter Display Guide
Locations of gauges and meters
When the main meter is moved to the right, some of the meter displays and the gauge layout will change.
Main meter in center position
The units of measure may differ depending on the intended destination of the vehicle.
- Odometer and trip meter display
- Engine coolant temperature gauge Displays the engine coolant temperature
- Outside temperature
Displays the outside temperature within the range of -40°F (-40°C) to 122°F (50°C) Low outside temperature indicator comes on when the ambient temperature is 37°F (3°C) or lower - Tachometer
Displays the engine speed in revolutions per minute When sport mode is selected for the driving mode, the periphery of the tachometer will change color and the scale of the tachometer will be emphasized.- Rev indicator
- Rev peak Speedometer
- Shift position/shift range/gear position
- ClockTime displayed is linked to the analog clock on the center panel.
- H Fuel gauge
Displays the quantity of fuel remaining in the tank In the following situations, the actual quantity of fuel remaining in the tank may not be dis-played correctly. Refer to P.73if the actual quantity of fuel remaining in the tank is not dis-played correctly.
- A small amount of fuel is added.
- Fuel is added with the fuel gauge near or at “F”.
- The vehicle is stopped on an uneven surface, such as a slope.
- The vehicle is driven on a slope or around a curve. Multi
information display
Presents the driver with a variety of vehicle data Displays warning messages if a malfunction occurs
Main meter moved to the right
- Outside temperature
Displays the outside temperature within the range of -40°F (-40°C) to 122°F (50°C) Low outside temperature indicator comes on when the ambient temperature is 37°F (3°C) or lower - Clock
Time displayed is linked to the analog clock on the center panel. - Tachometer
Displays the engine speed in revolutions per minute When sport mode is selected for the driving mode, the periphery of the tachometer will change color and the scale of the tachometer will be emphasized.- Rev indicator
- Rev peak
- Speedometer
- Shift position and shift range
- Odometer and trip meter display
- Fuel gauge
Displays the quantity of fuel remaining in the tank In the following situations, the actual quantity of fuel remaining in the tank may not be dis-played correctly. Refer to P.73if the actual quantity of fuel remaining in the tank is not dis-played correctly.- A small amount of fuel is added.
- Fuel is added with the fuel gauge near or at “F”.
- The vehicle is stopped on an uneven surface, such as a slope.
- The vehicle is driven on a slope or around a curve. Enginecoolant temperature gauge
Displays the engine coolant temperature
- Multi-information display
Presents the driver with a variety of vehicle data Displays warning messages if a malfunction occurs
Rev indicator
When the engine speed reaches a set speed or the red zone, a ring-shaped indicator ( A ) will be displayed on the tachometer. The indicators will be displayed in amber when the engine speed reaches a set speed, and in red when the engine speed reaches the red zone. The engine speed at which the rev indica-tor will begin to be displayed can be set on of the multi-information display. 
Rev peak
When the engine speed reaches or exceeds 5000 rpm, an afterimage of the tachometer will be displayed at the highest engine speed for approxi-mately 1 second.
Manually updating the fuel gauge and possible driving range
The fuel gauge and the possible driving range are linked. If the displays of the fuel gauge and possible driving range do not update after adding a small amount of fuel, the displays can be updated by performing the following procedure.
- Stop the vehicle on a level surface.
- Press the “ODO TRIP” switch to change the odometer and trip meter display to odometer.
- Turn the engine switch off.
- While pressing and holding the “ODO TRIP” switch, turn the engine switch to IGNITION ON mode.
- Continue to hold the “ODO TRIP” switch for approximately 5 seconds, and then release it once the odometer begins flashing.
Updating is complete once the odometer flashes for approximately 5 seconds and then the display returns to normal.
Outside temperature display
In the following situations, the correct outside temperature may not be dis-played, or the display may take longer than normal to change:
- When stopped, or driving at low speeds (less than 12 mph [20 km/h])
- When the outside temperature has changed suddenly (at the entrance/exit of a garage, tunnel, etc.)
When “–” or “E” is displayed, the system may be malfunctioning. Take your vehicle to your Lexus dealer.
Liquid crystal display
Customization
The gauges and meters can be customized on of the multi-information display.
WARNING
The information display at low tem- peratures
Allow the interior of the vehicle to warm up before using the liquid crystal infor-mation display. At extremely low tem-peratures, the information display monitor may respond slowly, and display changes may be delayed.
For example, there is a lag between the driver’s shifting and the new gear number appearing on the display. This lag could cause the driver to downshift again, causing rapid and excessive engine brak-ing and possibly an accident resulting in death or injury.
NOTICE
To prevent damage to the engine and its components
- Do not let the indicator needle of the tachometer enter the red zone, which indicates the maximum engine speed.
- The engine may be overheating if the engine coolant temperature gauge is in the red zone (H). In this case, immediately stop the vehicle in a safe place, and check the engine after it has cooled completely.
Odometer and trip meter dis-play
Display items
- Odometer
Displays the total distance the vehicle has been driven. - Trip meter A/trip meter B
Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B can be used to record and display different distances independently. - Distance until next engine oil change
Displays the distance the vehicle can be driven until an oil change is necessary.
Changing the display
Each time the “ODO TRIP” switch is pressed, the displayed item will be changed. When the trip meter is displayed, pressing and holding the switch will reset the trip meter.
Distance until the next engine oil change will be displayed when a warn-ing message indicating that oil mainte-nance should be performed soon or is required is displayed.
Changing the instrument panel light brightness
The brightness of the instrument panel lights can be adjusted.
- Darker
- Brighter
Brightness of the meter lights (day mode and night mode)
The brightness of the meter lights can be adjusted individually.
In the following situations, the meters changes between day mode and night mode.
- Day mode: When the tail lights are off or when the tail lights are on but the surrounding area is bright
- light mode: When the tail lights are on and the surrounding area is dark
Changing the main meter loca-tion
The display can be switched between the center and side positions.
Useful Links:
2023 – 2024 Lexus RX Review, Specs, Pricing and Mileage (Brochure)
2025 Lexus ES350 Theft-Alarm System User Guide
2025 Lexus ES350 Keys and Smart Key User Guide