Nissan FRONTIER 2023 Seats and Head restraints/headrests
A robust head restraint/headrest system that prioritizes occupant comfort and safety is installed on the 2023 Nissan Frontier. Both the front and rear head restraints on this system are movable, giving users the freedom to customize the height and angle to suit their own needs. These head restraints serve primarily as safety devices, though padded options do improve comfort during lengthy trips. Because they offer support and protection, they are essential in reducing the possibility of head and neck injuries sustained in rear-end collisions. For added whiplash injury prevention, certain models may have dynamic head restraints that advance during a crash. The 2023 Frontier’s headrest/restraint system exhibits a deliberate design and functionality that demonstrates Nissan’s dedication to occupant safety.
2023 Nissan Frontier Specs, Price, Features and Mileage (Brochure)
Seats
WARNING
- Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. You could also slide under the lap belt and receive serious internal injuries.
- For the most effective protection when the vehicle is in motion, the seat should be upright. Always sit well back and upright in the seat with both feet on the floor and adjust the seat properly.
- After adjustment, gently rock in the seat to make sure it is securely locked.
- Do not leave children unattended inside the vehicle. They could unknowingly activate switches or controls or make the vehicle move. Unattended children could become involved in serious accidents.
- To help avoid the risk of injury or death through the unintended operation of the vehicle and/or its systems, do not leave children, people who require the assistance of others, or pets unattended in your vehicle. Additionally, the temperature inside a closed vehicle on a warm day can quickly become high enough to cause a significant risk of injury or death to people and pets.
- Do not adjust the driver’s seat while driving so full attention may be given to vehicle operation. The seat may move suddenly and could cause a loss of control of the vehicle.
- The seatback should not be reclined any more than needed for comfort. Seat belts are most effective when the passenger sits well back and straight up in the seat. If the seatback is reclined, the risk of sliding under the lap belt and being injured is increased.
CAUTION
When adjusting the seat positions, be sure not to contact any moving parts to avoid possible injuries and/or damage.
Front manual seat adjustment (if so equipped)
Forward and backward
Pull the lever up and hold it while you slide the seat forward or backward to the desired position. Release the lever to lock the seat in position.
Reclining
To recline the seatback, pull the lever up and lean back. To bring the seatback forward, pull the lever up and lean your body forward. Release the lever to lock the seat back in position. The reclining feature allows adjustment of the seatback for occupants of different sizes for added comfort and to help obtain proper seat belt fit. Also, the seatback can be reclined to allow occupants to rest when the vehicle is parked.
Seat lifter (driver’s seat)
Pull up or push down the adjusting lever to adjust the height of the seat cushion to the desired position.
FRONT POWER SEAT ADJUSTMENT (if so equipped)
Operating tips
- The power seat motor has an auto-reset overload protection circuit. If the motor stops during operation, wait 30 seconds then reactivate the switch.
- Do not operate the power seat switch for a long period of time when the engine is off. This will discharge the battery.
Forward and backward
Moving the switch as shown will slide the seat forward or backward to the desired position.
Reclining
Move the recline switch as shown until the desired angle is obtained.
The reclining feature allows adjustment of the seatback for occupants of different sizes for added comfort and to help obtain proper seat belt fit. Also, the seatback can be reclined to allow occupants to rest when the vehicle is parked.
Seat lifter (driver’s seat)
Move the switch as shown to adjust the height of the seat cushion.
Lumbar support (driver’s seat)
The lumbar support feature provides adjustable lower back support to the driver. Move the lever forward or backward to adjust the seat lumbar area.
REAR BENCH SEAT (if so equipped)
The rear bench seat is non-adjustable. However, the seats can be folded up and folded to lay flat.
JUMP SEAT (if so equipped)
- Do not use a child restraint in the driver’s side jump seat. This seating position is not suitable for child restraint installation. A child restraint can be installed in the passenger’s side jump seat when the seat extension is unfolded from the seat base.
- When folding the jump seat, be careful not to squeeze your finger between the seat cushion and the body side.
ARMREST (if so equipped)
The rear bench seat comes equipped with an armrest. Pull the armrest down as shown.
FLEXIBLE SEATING
- Never allow anyone to ride in the cargo area or on the rear seats when they are in the fold-down position. In a collision, people riding in these areas without proper restraints are more likely to be seriously injured or killed.
- Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. Be sure everyone in your vehicle is in a seat and using a seat belt properly.
- Do not allow more than one person to use the same seat belt.
- Do not fold down the rear seats when occupants are in the rear seat area or any luggage is on the rear seats.
- Make sure that the seat path is clear before moving the seat.
- Be careful not to allow hands or feet to get caught or pinched in the seat.
- Head restraints/headrests should be adjusted properly as they may provide significant protection against injury in an accident. Always replace and adjust them properly if they have been removed for any reason.
- If the head restraints/headrests are removed for any reason, they should be securely stored to prevent them from causing injury to passengers or damage to the vehicle in case of sudden braking or an accident.
- When returning the seatbacks to the upright position, be certain they are completely secured in the latched position. If they are not completely secured, passengers may be injured in an accident or sudden stop.
- Properly secure all cargo to help prevent it from sliding or shifting. Do not place cargo higher than the seatbacks. In a sudden stop or collision, unsecured cargo could cause personal injury.
Folding the rear bench seat up (if so equipped)
To fold the rear bench seat up:
- Lift up on the lever, located on the side of the seat, while lifting the front of the seat cushion up.
- Fold the bottom of the seat cushion toward the back of the vehicle until it locks in place.
- Repeat this process to raise and secure the seat cushion on the other side of the vehicle for maximum storage capacity.
To return the rear bench seat to a seating position, reverse the process. Make sure to properly push the seat cushion down into place.
WARNING
- When the vehicle is being used to carry cargo, properly secure all cargo to help prevent it from sliding or shifting. Do not place cargo higher than the seatbacks. In a sudden stop or collision, unsecured cargo could cause personal injury.
- Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. Be sure everyone in your vehicle is in a seat and using a seat belt properly. Never ride in the rear seat unless the seat bottom cushions are in place and latched.
- When returning the seatbacks to the upright position, be certain they are completely secured in the latched position. If they are not completely secured, passengers may be injured in an accident or sudden stop.
- Pull strap
- Child restraint anchor points
Folding the rear bench seat down (if so equipped)
The rear bench seatback can be tilted forward to access the child restraint anchor point locations or the jacking equipment. To tilt the seatback forward, pull the pull strap up and tilt the seatback. The child restraint anchor points can be accessed behind the rear bench seatback. The jacking equipment can be accessed from behind the passenger’s side seatback..
WARNING
Never allow anyone to ride in the cargo area or on the rear seat when it is in the fold-down position. Use of these areas by passengers without proper restraints could result in serious injury or death in an accident or sudden stop.
HEAD RESTRAINTS/HEADRESTS
Head restraints/headrests supplement the other vehicle safety systems. They may provide additional protection against injury in certain rear-end collisions. Adjustable head restraints/headrests must be adjusted properly, as specified in this section. Check the adjustment after someone else uses the seat. Do not attach anything to the head restraint/headrest stalks or remove the head restraint/headrest. Do not use the seat if the head restraint/headrest has been removed. If the head restraint/headrest was removed, reinstall and properly adjust the head restraint/headrest before an occupant uses the seating position. Failure to follow these instructions can reduce the effectiveness of the head restraints/headrests. This may increase the risk of serious injury or death in a collision.
Crew Cab
King Cab®
The illustration shows the seating positions equipped with head restraints/headrests.
- Indicates the seating position is equipped with a head restraint.
- Indicates the seating position is equipped with a headrest.
+ Indicates the seating position is not equipped with a head restraint or headrest (if applicable). - Your vehicle is equipped with a head restraint/headrest that may be integrated, adjustable, or non-adjustable.
- Adjustable head restraints/headrests have multiple notches along the stalk(s) to lock them in the desired adjustment position.
- The non-adjustable head restraints/headrests have a single locking notch to secure them to the seat frame.
- Proper Adjustment:
- For the adjustable type, align the head restraint/headrest so the center of your ear is approximately level with the center of the head restraint/headrest.
- If your ear position is still higher than the recommended alignment, place the head restraint/headrest at the highest position.
- If the head restraint/headrest has been removed, ensure that it is reinstalled and locked in place before riding in that designated seating position.
ADJUSTABLE HEAD RESTRAINT/HEADREST COMPONENTS
- Removable head restraint/headrest
- Multiple notches
- Lock knob
- Stalks
NON-ADJUSTABLE HEAD RESTRAINT/HEADREST COMPONENTS
- Removable head restraint/headrest
- Single notch
- Lock knob
- Stalks
REMOVE
Use the following procedure to remove the head restraint/headrest:
- Pull the head restraint/headrest up to the highest position.
- Push and hold the lock knob.
- Remove the head restraint/headrest from the seat.
- Store the head restraint/headrest properly in a secure place so it is not loose in the vehicle.
- Reinstall and properly adjust the head restraint/headrest before an occupant uses the seating position.
INSTALL
- Align the head restraint/headrest stalks with the holes in the seat. Make sure that the head restraint/headrest is facing the correct direction. The stalk with the notch (notches) 1O must be installed in the hole with the lock knob 2O.
- Push and hold the lock knob and push the head restraint/headrest down.
- Properly adjust the head restraint/headrest before an occupant uses the seating position.
ADJUST
For adjustable head restraint/headrest Adjust the head restraint/headrest so the center is level with the center of your ears. If your ear position is still higher than the recommended alignment, place the head restraint/headrest at the highest position.
For non-adjustable head restraint/headrest
Make sure the head restraint/headrest is positioned so the lock knob is engaged in the notch before riding in that designated seating position.
Raise
To raise the head restraint/headrest, pull it up. Make sure the head restraint/headrest is positioned so the lock knob is engaged in the notch before riding in that designated seating position.
Lower
To lower, push and hold the lock knob and push the head restraint/headrest down. Make sure the head restraint/headrest is positioned so the lock knob is engaged in the notch before riding in that designated seating position.
FAQ
What is the purpose of head restraints/headrests in the 2023 Nissan Frontier?
Head restraints, also known as headrests, are designed to provide support and protect the occupants’ heads and necks during a collision.
How many head restraints are typically found in the Frontier?
The Frontier typically has head restraints for the front and rear seats.
Are the head restraints adjustable for height and angle in the Frontier?
Yes, most models include adjustable head restraints to accommodate different occupants’ heights and preferences.
Do the head restraints in the Frontier have any additional comfort features?
Some models may have padded or contoured head restraints for added comfort during long drives.
Can the head restraints be removed if needed in the Frontier?
In many cases, the head restraints can be removed for cleaning or storage.
Do the rear seats in the Frontier have adjustable head restraints as well?
Yes, the rear seats typically have adjustable head restraints for passenger comfort and safety.
Are there any head restraint-related safety features, such as active head restraints, in the Frontier?
Some models may include active head restraints that move forward during a rear-end collision to reduce the risk of whiplash injuries.
Can the head restraints be folded or lowered when not in use in the Frontier?
The head restraints can often be folded or lowered when not in use to improve rearward visibility.
How do the head restraints enhance safety in the Frontier?
Head restraints provide crucial protection by reducing the risk of neck and head injuries in the event of a rear-end collision.
Are there any maintenance requirements for the head restraints in the Frontier?
Head restraints generally require minimal maintenance and should be kept clean and in good condition.
Can the head restraints be customized or replaced with different designs in the Frontier?
Customizing or replacing head restraints with different designs may be possible through aftermarket options.
Are there any regulations or guidelines for the proper use of head restraints in the Frontier?
It’s important to ensure that head restraints are properly adjusted for each occupant’s comfort and safety.
Are the head restraints compatible with child safety seats in the Frontier?
The head restraints are designed to work with child safety seats, and they should not be removed when using such seats.
Do the head restraints have any built-in speakers or entertainment features in the Frontier?
Head restraints typically do not have built-in speakers or entertainment features.
Can the head restraints be retrofitted to older Frontier models?
Retrofitting head restraints to older models may be possible but can be complex and may require modifications.
Useful Link
View Full User Guide: Nissan FRONTIER 2023 User Guide
Download Manuals: https://www.nissanusa.com/owners/ownership/manuals-guides.htm
2023 Nissan Frontier Specs, Price, Features and Mileage (Brochure)
