Tata Punch 2021 Driver Information System User Manual
|This indicates distance travelled by the vehicle. The odometer reading does not return to “0” when maximum value is reached; the display will freeze the maximum value.
Trip meter A & B
The trip meter can be used to measure the distance travelled on short trips or between fuel stops. It can be reset to “0”. The trip meter reading becomes “0.0” after it crosses 9999.9 km.
|Indicates current time in AM/PM mode. Clock time can be changed using steering wheel switches on the steering wheel.
Whenever the battery terminals or related fuses are connected, you must reset the clock time. This feature is available when ignition switch is in ‘ON’ position.
NOTE: Clock settings can also be changed through infotainment system. For more information, refer infotainment manual.
|This indicates how many days/kilometres are left till service is due. If service is overdue, it will display “0” km or “0” days and a spanner symbol will blink every time ignition is ON for a few seconds. Never reset the display between
|service intervals as it may give incorrect readings. The in- formation is retained in the service interval display even after the vehicle battery is disconnected.
NOTE: This option is for indicative purpose only. Keep track of your odometer reading and follow the maintenance schedule.
|Respective door open display pop up come for few sec and then telltale with respective door open shall be dis- played.
Current gear position (indicator)
Current gear engaged by the transmission shall be dis played on DIS.
NOTE: If “F” is displayed it means a defect in the system is detected Contact the nearest TATA MOTORS Authorized service centre immediately to rectify the problem.
In case of a manual transmission, the gear number will be displayed when the clutch is fully released.
|Up or down arrow will be displayed on DIS to shift a gear up or down.
No arrow shall be displayed when the selected gear is as per the Vehicle dynamics.
Night time Illumination control
Dashboard Illumination in Night time can be controlled in 5 steps as per user’s convenience using SET and MODE button.
Refer settings flow.
Drive Mode (AMT)
Applicable to AMT variant of the vehicle. “M” indicates Manual Drive mode. “A” indicated Automatic Drive mode.
Instantaneous Fuel Economy (IFE)
To reach the Instant Fuel Economy in the Instrument cluster. Press the button on the RHS of the steering wheel.
- IFE display does not show Fuel Economy of last drive.
- The display does not show actual value unless vehicle is moving.
- The indication on the display screen may be delayed if fuel consumption is affected by driving pattern.
IFE will vary frequently as per driving pattern.
Power And Torque
Indicates the value of Power and Torque delivered by engine in the particular driving condition.
Average Fuel Economy (AFE)
AFE value is an estimate of fuel economy. It may vary significantly based on driving conditions, driving habits, and the condition of the vehicle.
To see the average fuel economy in the instrument cluster, press the switch Trip time, Average speed and Trip distance will reset to ‘0’ when the respective Trip meter is reset. on the RHS of the steering wheel.
Average Fuel Economy, Trip time, and Average speed will get reset to ‘0’ when Battery is removed and refitted. Average Fuel Economy will be displayed as ‘—.—‘for the initial 0.5 km of the respective trip. Once 0.5 km distance is covered, Average Fuel Economy will be displayed. Even after 0.5 km distance covered for a particular trip, if Average Fuel Economy is displayed as ‘—.—‘, then take your vehicle to TATA MOTORS Authorized Dealer/Service Center.
View Full User Guide: Tata Punch User 2021 Manual
Download Manuals: https://cars.tatamotors.com/service/owners/owners-manual
Tata 2023 Top Accessories
[amalinkspro_table id=”32452″ new-window=”on” nofollow=”on” addtocart=”off” /]