Tata Punch 2021 Rear Windshield User Manual

Tata logo

Tata Punch User 2021 Rear Windshield Manual

Rear Windshield

Turn the rotary knob counter Electronic Steering Column Lock (ESCL) Chime 13 clockwise such that it aligns its positions with the arrow mark and hold it to operate rear windshield wash and wipe function. It will return to ‘Rear wipe’ position as soon as it is released and continues to wipe.

NOTE
When you reverse the car with front wipers in ‘ON’ condition, the rear wiper will also be ‘ON’ (if provided).

WARNING
If you operate wash and wipe function for more than 15 seconds the controller cuts off the supply to the washer motors to avoid overheating.

Rain light Sensor (if available)

The integrated rain and light sensor is mounted on front windshield glass to sense rain and light. As per the input from sensor, the wipe and light functions will work automatically.

DASHBOARD CONTROLS

Fascia switches are provided on driver side dashboard.Tata Punch User 2021 Rear Windshield Manual 01

  1. Front Fog lamp switch
  2. ECO mode
  3. Idle stop start switch (ISS)

Front Fog Lamps (if available)Tata Punch User 2021 Rear Windshield Manual 02

The front fog lamps are located on the front bumper. In poor visibility conditions due to fog, snow or rain, the fog lamps make visibility better and make it easier for other road users to see you. It turns to ‘ON’ when the fog lamp switch is turned on when the ignition is ‘ON’ and when the po-sition and parking/ head lamp is ‘ON’. An indicator on the instrument cluster will come on when the front fog light is ‘ON’.

Fog Lamp As Cornering Lamp

The front fog lamps also function as cornering lamps to light up the area to the side of the vehicle, making night-time parking and turning safer.

Eco Mode(if available)

Refer Starting and Driving section.

Idle Stop Start Switch (ISS) (if available)

Your car is equipped with push Button on right side of the dashboard to Enable OR Disable ISS function. For more details refer ‘starting & driving” section.

STEERING MOUNTED CONTROLS (LHS) (if available)Tata Punch User 2021 Rear Windshield Manual 03

  • Volume
    Press above switch to increase or decrease Tata Punch User 2021 Rear Windshield Manual 04volume of music system  radio.
  • Seek Forward backwardTata Punch User 2021 Rear Windshield Manual 05
    Press above switches to change radio channels.
  • Receive Calls/PTT (Push to Talk)Tata Punch User 2021 Rear Windshield Manual 06
    Press the above switches to accept incoming call when a cell phone is connected via Bluetooth.
  • Voice Recognition
    To start, press the voice activation button provided on the steering wheel. The system mutes/ pauses the currently played audio and you will hear a beep sound to indicate the activation of the voice recognition feature. The system displays the Voice Recognition screen on Infotainment to indicate activation of the feature.
  • NOTE
  • The system will start recognizing your voice command only after the beep. So, speak your command only after you hear the voice activation beep.
    For more information related to steering-mounted controls, refer the infotainment manual. ((Refer link –http://service.tatamotors.com/content/owners-manual )if applicable)
  • Mute phone RejectTata Punch User 2021 Rear Windshield Manual 07
    Press above switch to reject or hang up a phone call. It is also used to mute the volume of the music system/radio.
  • SourceTata Punch User 2021 Rear Windshield Manual 08
    Press above switches to select the required source in the infotainment system i.e. USB, AM, FM and Bluetooth.

STEERING MOUNTED CONTROLS (RHS) (if available)Tata Punch User 2021 Rear Windshield Manual 09

Instrumentation Controls(IC)

  1. Instrumentation Controls Scroll LH1. Instrumentation Controls Scroll LH
    Press above switch to scroll LH on Instrument Cluster display
  2. Instrumentation Controls Scroll RH
    Press above switch to scroll RH on Instrument Cluster display.
  3. OK / Select & Long Press for Settings Press the above switch to select the option and long press it (approx. three seconds) to go directly to the instrument cluster settings.
  4. Cruise Set (reset)Tata Punch User 2021 Rear Windshield Manual 07 Using Speed Increase (decrease) Switch Press the cruise control master switch on steering wheel. Accelerate the vehicle to the desired speed.
    Make sure that the Clutch and Brake pedals are not pressed.

    • Press the ‘SET’Tata Punch User 2021 Rear Windshield Manual 08 button on steering wheel switch to set the desired cruise speed. The cruise control indicator on instrument cluster will turn ‘ON’.
      Remove your foot from the accelerator pedal.
    • Once Cruise control is activated the vehicle automatically maintains the stored speed.

NOTE
Minimum gear and speed requirements for setting the cruise.

Changing the Set Cruise Speed

The set cruise speed can be adjusted using the buttons ‘+’ (to increase) or ‘-’ (to decrease) on the steering wheel. The speed increases and decreases on a single press.
The changed speed will be shown on the speedometer. Keeping the switch pressed increases or decreases the speed continuously till the switch is released or the maximum minimum speed limit for a particular gear is reached. The set speed can also be increased by pressing the accelerator pedal till the desired speed is achieved and then pressing the ‘SET’ button.
The set speed can also be decreased by pressing the brake pedal (The cruise indicator will turn OFF) and slowing down to desired speed and then pressing the ‘SET’ button (The cruise control indicator will turn ‘ON’ again).

Cruise Control Master Switch

Cruise speed can be resumed only if cruise control is deactivated by applying the brake. To resume the previously set cruise speed, accelerate the vehicle to a speed is as per gear selected as below:
3rd gear approx. 30Kmph to 80Kmph
4th gear approx. 40kmph to 120Kmph
5th gear approx. 50kmph to 140Kmph

Cruise Control Deactivating Switch
There are two ways to deactivate cruise control:

Applying brake clutch.
Press the deactivation switch on Steering Wheel.

NOTE
Minimum gear and speed requirements for setting the cruise.

NOTE
When the vehicle will come out of cruise automatically- when the threshold required.ment of required power and torque is not met, the vehicle might come out of cruise control and manual intervention might be required. It normally happens when the vehicle runs at a gradient and sharp turning with a slope.

NOTE
For more information related to steering-mounted controls, refer to the infotainment manual. ((Refer link –http://service.tatamotors.com/content/ownersmanual )if applicable)

Reference Links

View Full User Guide: Tata Punch User 2021 Manual

Download Manuals: https://cars.tatamotors.com/service/owners/owners-manual

Tata 2023 Top Accessories

[amalinkspro_table id=”32452″ new-window=”on” nofollow=”on” addtocart=”off” /]

Leave a Reply

Your email address will not be published. Required fields are marked *