Tata Punch User 2021 Seat Backrest Angle Adjustment Manual
Seat Backrest Angle Adjustment
To change the seat backrest angle, lean forward slightly and pull up the lever (1). Adjust the seat backrest until it reaches a de-sired comfortable position. Make sure that the lever returns to its original position and seat is securely latched.
Adjust the seat backrest until your arms are slightly angled when holding the steering wheel.
Do not travel in a moving vehicle with the seat backrest in an excessively reclined position as this can be dangerous.
Seat Height Adjustment (if available)
To raise the seat, pull and continue pumping the lever (2) in the upward direction until the seat is at the desired height.
To lower the seat, pump the lever downward until the seat is at the desired height.
Seat Forward/rearward Adjustment
Lift lever (3) and slide the seat forward or to the rear. Release the lever and make sure that seat is securely latched.
Adjust the driver seat position in such a way that the driver will be able to operate the control pedals comfortably.
Head Restraint (if available)
Adjust the head restraint so that it is as close to the head as possible and the center of the head restraint supports the back of the head at eye level. This will reduce the risk of injury to the head and neck in the event of an accident or similar situation.
Do not drive the vehicle without the seat head restraints. Head restraints are intended to help reduce injuries during an accident.
Front Passenger Seat Sensor
An occupant detection sensor is installed in the front passenger seat to detect whether the seat is occupied or not and if occupied, it will activate the seat belt re-minder warnings. The sensor does not have any control on the deployment of airbags.
Any modification in the seat material or addition of seat cover may damage or affect the performance of the sensor.
Rear seat folding
Rear Seat Folding (complete Seat 100%)
To fold the seat:
Press the backrest release knobs provided on both sides at the same time.
- Fold the backrest seat forward. Move the driver and front passenger seat for-ward if necessary.
If the rear bench seat and seat backrest are not latched properly, they could fold forwards during hard braking or in the event of a collision. The vehicle occupant would thereby be pushed into the seat belt by the rear bench seat or by the seat back-rest. The seat belt can no longer offer the intended level of protection and could even cause injuries. Objects or loads in the trunk cannot be restrained by the seat backrest. There is an increased risk of injury. Before every trip, make sure that the seat backrests and the rear bench seat/rear seat are engaged and securely latched.
Inside Rear View Mirror (IRVM)
To adjust the mirror move the mirror up, down or sideways manually to obtain the best rear view.
When you drive at night, set the selector tab to select anti-glare mode (if available) to reduce glare from the headlights of vehicles behind you.
Use antiglare position only when necessary, as it reduces rear view clarity.
Outer Rear View Mirrors (ORVM)
You can adjust the outer rear view mirrors manually (By hand) or remotely by knob. Adjust the outside rear view mirrors to de-sired position.
Objects visible in mirror are actually closer than they appear. Always make sure of the actual distance from the road users traveling behind by glancing over your shoulder.
View Full User Guide: Tata Punch User 2021 Manual
Download Manuals: https://cars.tatamotors.com/service/owners/owners-manual
Tata 2023 Top Accessories
[amalinkspro_table id=”32452″ new-window=”on” nofollow=”on” addtocart=”off” /]