Suzuki New CARRY 2019 MIXTRAX Settings User Manual

BMW-logo

Suzuki New CARRY 2019 MIXTRAX Settings User Manual

MIXTRAX Settings

Menu Item Description
“SHORT PLAYBCK”

“1.0 MIN”, “1.5 MIN”, “2.0 MIN”,

“2.5 MIN”, “3.0 MIN”, “OFF”

 

Select the length of the playback time.

“MIX PATTERN”

“SOUND LEVEL”

 

Change the MIXTRAX special effects according to the audio level. The mix pattern changes according to the sound level.

“LOW PASS” The mix pattern changes according to the bass level.
“RANDOM” The mix pattern changes randomly according to the sound level mode and low pass mode.
“DISPLAY FX”

“ON”, “OFF”

 

Set the MIXTRAX special effects on/off.

“CUT IN FX”

“ON”, “OFF”

 

Turn the MIXTRAX sound effects on/off while manually changing the tracks.

Additional Information

Troubleshooting

Problem Possible cause Possible solution
The display automatically returns to the normal display. No operations have been made for about 30 seconds. Perform an operation.
 

The repeat play range changes unexpectedly.

Depending on the repeat play range, the selected range may change when another folder or track is being selected or during fast forwarding/reversing.  

Select the repeat play range again.

A subfolder is not played back. Subfolders cannot be played when “FLD” (folder repeat) is selected. Select another repeat play range.
 

The sound is intermittent.

You are using a device, such as a cellular phone, that may cause audible interference. Move electrical devices that may be causing the interference away from the unit.

Error messages

Display Possible cause Possible solution

Common

 

“AMP ERROR”

•   This unit fails to operate or the speaker connection is incorrect.

•   The protective circuit is activated.

Turn the ignition switch “OFF” and back to “ON” again.
“NO XXXX” (“NO TITLE”, for example) There is no embedded text information. Switch the display or play another track/ file.

USB device/iPod

 

“FORMAT READ”

Sometimes there is a delay between the start of playback and when you start to hear any sound. Wait until the message disappears and you hear sound.
 

“NO AUDIO”

There are no songs. Transfer the audio files to the USB device and connect.
The connected USB device has security enabled. Follow the USB device instructions to dis- able the security.
“SKIPPED” The connected USB device contains DRM protected files. The protected files are skipped.
“PROTECT” All the files on the connected USB device are embedded with DRM. Replace the USB device.
“N/A USB” The connected USB device is not sup- ported by this unit. Disconnect your device and replace it with a compatible USB device.
“HUB ERROR” The USB device connected via a USB hub is not supported by this unit. Connect the USB device directly to this unit using a USB cable.
Display Possible cause Possible solution
 

 

 

 

 

“CHECK USB”

The USB connector or USB cable has short-circuited. Check that the USB connector or USB cable is not caught in something or dam- aged.
 

The connected USB device consumes more than maximum allowable current.

Disconnect the USB device and do not use it. Turn the ignition switch “OFF” and back to “ACC” or “ON”. Connect only compliant USB devices.
 

The iPod operates correctly but does not charge.

Make sure the connection cable for the iPod has not shorted out (e.g., not caught in metal objects). After checking, turn the ignition switch “OFF” and back to “ON”, or disconnect the iPod and reconnect.
 

 

 

 

“ERROR-19”

 

 

Communication failed.

Perform one of the following operations, then return to the USB source.

•   Turn the ignition switch “OFF” and back to “ON”.

•   Disconnect the USB device.

•   Change to a different source.

 

iPod failure.

Disconnect the cable from the iPod. Once the iPod main menu is displayed, reconnect the iPod and reset it.
“ERROR-23” USB device was not formatted properly. Format the USB device with FAT12, FAT16 or FAT32.
Display Possible cause Possible solution
 

 

“ERROR-16”

The iPod firmware version is old. Update the iPod version.
 

iPod failure.

Disconnect the cable from the iPod. Once the iPod main menu is displayed, recon- nect the iPod and reset it.
“STOP” There are no songs in the current list. Select a list that contains songs.
“NOT FOUND” No related songs. Transfer songs to the iPod.

APP

“START UP APP” The application has not started running yet. Operate the mobile device to start up the application.

Spotify

“CHECK APP” Connection failed. to the Spotify application Follow the instructions that appear on the screen.

Handling guidelines for USB storage device

  • Connections via USB hubs are not supported.
    Firmly secure the USB storage device before driving. Do not let the USB stor-age device fall onto the floor, where it may become jammed under the brake or accelerator pedal.
    Depending on the USB storage device, the following problems may occur.

    • Operations may vary.
    • The storage device may not be recognized.
    • Files may not be played back properly. The device may cause audible interference when you are listening to the radio.
  • iPod
  • Do not leave the iPod in places with high temperatures.
  • Firmly secure the iPod when driving. Do not let the iPod fall onto the floor, where it may become jammed under the brake or accelerator pedal.
    The settings of the iPod such as the equalizer and repeat play are changed automatically when the iPod is connected to the unit. Once the iPod is disconnected, those settings will return to the original settings.
  • Incompatible text saved on the iPod will not be displayed by the unit.

Reference Links

View Full User Guide: Suzuki New CARRY 2019 User Manual

Download Manuals: https://suzuki-aftersales.net/manuals

Leave a Reply

Your email address will not be published. Required fields are marked *