Tag: Ducati XDiavel 2019

Categories
Ducati XDiavel

Ducati XDiavel 2019 User Manual

Ducati-Logo

Ducati XDiavel 2019

The 2019 Ducati XDiavel is a powerful and stylish cruiser motorbike that goes against the grain and pushes the limits of power and style. The XDiavel is a true feat of engineering and design. It is a mix of a powerful cruiser and a high-performance racing bike. It looks powerful and aggressive, and its sleek lines and high-quality finishes give it an air of grace. The XDiavel has a powerful 1262cc Testastretta DVT engine that puts out an exhilarating 152 horsepower. Its acceleration and speed are unmatched. With cutting-edge features like ride-by-wire throttle, multiple riding modes, and Ducati Power Launch, the XDiavel is easy to control and fun to ride. The 2019 Ducati XDiavel is a new era in the world of cruisers. It has a new and adjustable riding position, advanced electronics, and a lot of high-end features. It combines power, style, and sophistication in a way that captivates riders and takes them on an amazing trip.

Smartphone

To pair a Smartphone, the pairing procedure with the Bluetooth control unit requires user to enter a code (0000), which is only necessary the first time the device is paired with the Bluetooth control unit. In this case, during the pairing the display shows the PIN to be entered “INSERT PIN ON SMARTPHONE: 0000”.
As soon as the user enters the PIN on the Smartphone, the device is paired and indicated in the list on the left.
GPS navigation system
If you wish to pair a Bluetooth Navigator, the pairing procedure is completed on the navigator, by selecting on the latter the connection with the motorcycle Bluetooth control unit.
In this case, during the pairing the display shows the message “CONNECT ON NAVI” that disappears when the connection between the control unit and the navigator is completed, and the name of the navigator is indicated in the list on the left.

Note
If user does not complete the pairing procedure on the Navigator within 90 seconds, the pairing screen on the instrument panel will go out, and the display will go back to Bluetooth Setting Menu main screen.
If the navigator pairing is active for more than 90 seconds and so there have been errors in the procedure, it is not possible to select the detected devices. It is only possible to press on EXIT to abort the procedure if deemed necessary.
Once the pairing is completed, the name of the paired device is shown in the device list on the left: only the first characters of the device name are displayed.
Pairing deactivation takes place when quitting the Bluetooth Setting Menu or when no more Bluetooth devices are detected.

Attention
Ducati does not ensure a correct connection to the Ducati Multimedia System of Bluetooth navigators that are not provided in the following kits:

  • Kit of Ducati Zumo satellite navigator 350
  • Kit of Ducati Zumo satellite navigator 390
  • Kit of Ducati Zumo satellite navigator 395 Note
    The Ducati kits mentioned above can be purchased separately at a Ducati Dealer or Authorised Service Centre.

Deleting associated devices
From the Bluetooth setting menu, it is possible to access the list of the paired devices on the left. From the list of paired devices, user can select the device to be deleted by pressing button (1) or button (2). When the device is selected and the relevant DEL label is green, press button (4) for at least two seconds to eliminate the device from the paired device list.
Select EXIT by pressing button (1) or (2) and by pressing button (4) you quit the Bluetooth Setting Menu and go back to the main Setting Menu screen.

Information (INFO)
This function allows for displaying several useful details. To view the “INFO”, enter the Setting Menu, use button (1) or (2) to select “INFO” and press button (4). Available information:

  • BATTERY (battery voltage);
  • RPM (engine rpm indication);
  • BLUETOOTH version (with Bluetooth module)(X Diavel S).

Light control
Low/high beam (version without DRL)
At Key-On, the high beam and low beam lights are OFF: only the parking lights are turned on.
Once the engine is started, the low beam is automatically turned on; it is possible to switch from low beam to high beam and vice versa by pressing button (3) in positions (A) and (B). If the engine is not started upon key-on, it is anyway possible to switch high/low beams on by pushing a button (3) position (C) on LH switch.
If within 60 seconds from the “manual” switching on of the low/high beam the engine is not started, the lights are disabled again (off).

Low/high beam (version with DRL)
At Key-On, the high beam and low beam lights are OFF: only the parking lights and the DRL light are turned on.
After starting the engine the high beam is automatically turned on if the AUTO mode is set and the instrument panel detects poor ambient light
(NIGHT): if, on the other hand, the instrument panel detects good light conditions (DAY), the DRL light remains on and the low beam remains off; it is possible to switch the DRL light to low beam (and vice versa) with a button (9).
It the low beam is activated, it is possible to switch on the high beam with a button (3), and position (A). If the engine is not started upon key-on, it is anyway possible to switch high/low beams on by pushing a button (3) position (C) on LH switch.
If within 60 seconds from the “manual” switching on of the low/high beam the engine is not started, the lights are disabled again (off).

High/low beam switching off during vehicle start (version without DRL light).
To preserve the motorcycle battery, if when starting the engine the high/low beams are ON, the headlight is automatically switched off and then on again when the engine is started.
High/low beam switching off during vehicle start (version with DRL lights).
To preserve the motorcycle battery, if when starting the engine the high/low beams or the DRL lights are ON, the headlight is automatically switched off and then on again when the engine is started.

DRL (Daytime Running Light) — only for the version with DRL lights
Upon each Key-On, the DRL lights are turned on. It is possible to switch off the DRL lights by means of button (9) on the left-hand switch. By pressing button (9) again, the DRL lights are switched on again.

Note
Every time button (9) is pressed, the DRL light automatically switches to MANUAL mode. To go back to the AUTO mode, turn the Key Off and On or set the AUTO mode by means of the DRL CONTROL function in the Setting Menu.
By pressing button (3), the high and low beams are turned on whereas the DRL light is turned off. Upon releasing the light button (3), the DRL light is automatically switched on again.

DRL in AUTO mode

If the DRL is in this mode, when starting the engine it automatically switches off and the low beam is activated if the instrument panel detects poor light conditions (NIGHT). If the instrument panel detects good light conditions (DAY), the DRL remains on and the low beam off: in this mode, the instrument panel automatically switches from the DRL light to the low beam and vice versa, according to the detected ambient light conditions. The display shows the green logo with letter A.

Attention
Using the DRL light in AUTO (automatic) mode in case of poor light conditions, especially in case of fog or clouds, could impair safety: in this case DUCATI recommends to manually activating the low beam.
DRL in MANUAL mode
If the DRL light is in this mode, it does not change status when starting the engine. To switch on or off the DRL light it is necessary to press a button (9). The display shows the yellow logo with the letter M.
Using the DRL light in poor light conditions (dark) could compromise the riding visibility and dazzle who is coming on the opposite lane.

Note
Using the DRL light during the day improves visibility as it is easier to perceive by those coming on the opposite side compared with the low beam.

Turn indicators
To activate the left turn indicators, press button (10) in position (I); to activate the right turn indicators, press button (10) in position (L).
Turn indicators can be canceled by pressing button (10) on LH switch.

Automatic switch-off
The turn indicators switch off automatically after the turn, as calculated based on vehicle speed, lean angle, and in general according to the analysis of vehicle dynamic conditions.
This means that an automatic switch-off is triggered when the vehicle speed exceeds 20 km/h (12.4 mph) after the turn indicator button was pressed.
Turn indicators also switch off automatically if they remained on for a long mileage (which can range between 200 and 2000 meters (656-6562 feet), depending on vehicle speed when the turn indicator button was pressed).
If the turn indicator switch is again operated, while turn indicator is still on, the automatic switch-off feature is re-initialized.

Attention
The automatic deactivation systems assist systems helping the rider control the turn indicators in the most comfortable and easy way. Such systems have been designed to work in most riding maneuvers, nonetheless, the rider must pay attention to the turn indicator operation (disabling or enabling them by hand if needed).

Useful Link

Download link: https://www.ducati.com/ww/en/service-maintenance/owner-manuals