Tag: Exit Warning

2023 Mercedes-Benz E-CLASS SEDAN Blind Spot and Exit Warning User Manual

2023 Mercedes-Benz E-CLASS SEDAN Blind Spot Assist and Exit Warning User Manual

The Mercedes-Benz E-Class Sedan 2023 is a luxurious and technologically advanced vehicle that prioritizes safety to ensure a secure and comfortable driving experience. One of the most noteworthy safety features of the car is the Blind Spot and Exit Warning system, which is designed to prevent accidents caused by blind spots and opening doors into traffic. This system uses radar sensors to detect any objects in the driver’s blind spot and sends alerts to the driver via both visual and audible signals. It also warns the driver and passengers if there is a risk of opening a door into the path of an oncoming vehicle or cyclist. By incorporating this advanced technology, the Mercedes-Benz E-Class Sedan 2023 offers exceptional safety and reassurance for both the driver and passengers.

Blind Spot Assist and Active Blind Spot Assist with Exit Warning

Blind Spot Assist and Active Blind Spot Assist use two lateral, rear-facing radar sensors to monitor the area up to 130 ft. (40 m) behind and 10 ft. (3 m) next to your vehicle.
If a vehicle is detected at speeds above approximately 8 mph (12 km/h) and this vehicle subsequently enters the monitoring range directly next to your vehicle, the warning lamp in the outside mirror lights up red.

Permanent status display in the instrument cluster:

(gray): the system is activated but inoperative
(green): the system is activated and operational

If a vehicle is detected close to your vehicle and you switch on the turn signal indicator in the corresponding direction, a double warning tone sounds and the red warning lamp in the outside mirror flashes. If the turn signal indicator remains switched on, all other detected vehicles are indicated only by the flashing of the red warning lamp. If you overtake a vehicle quickly, no warning is given.

WARNING

Risk of the accident despite Active Blind Spot Assist Active Blind Spot Assist does not react to the following:

If you overtake a vehicle too closely so that it is in the blind spot area
If vehicles traveling at a much faster speed approach and then overtake
Active Blind Spot Assist may not give warnings or intervene in such situations.
Always pay careful attention to the traffic situation and maintain a safe distance at the side of the vehicle.
Observe the notes on driving systems and your responsibility; you may otherwise fail to recognize dangers (/ page 170).
Exit warning The exit warning is an additional function of Blind Spot Assist and can warn vehicle occupants about approaching vehicles when leaving the vehicle when stationary.

WARNING
Risk of accident despite exit warning The exit warning neither reacts to stationary objects nor to persons or road users approaching you at a greatly differing speed. The exit warning cannot warn drivers in these situations.

Always pay particular attention to the traffic situation when opening the doors and make sure there is sufficient clearance.
If there is a vehicle in the monitoring range, this is indicated in the outside mirror.
If a vehicle occupant opens the door on the side with the warning, a warning tone sounds and the warning lamp in the outside mirror starts to flash. This additional function is only available when Blind Spot Assist is active. When the exit warning is activated, it can warn vehicle occupants for up to three minutes after switching the vehicle off. The exit warning is no longer available once the warning lamp in the outside mirror flashes three times.
The exit warning is only an aid and not a substitute for the attention of vehicle occupants. The responsibility for opening and closing the doors and for leaving the vehicle remains with the vehicle occupants.

System limits
Blind Spot Assist and Active Blind Spot Assist may be limited in the following situations, in particular:

if there is dirt on the sensors or the sensors are obscured
in poor visibility, e.g. due to fog, heavy rain or snow
if there are narrow vehicles, e.g. bicycles or motorbikes
if the road has very wide or narrow lanes
if vehicles are not driving in the middle of their lane
Warnings may be issued in error when driving close to crash barriers or similar continuous lane borders. Always make sure that there is sufficient distance to the side for other traffic or obstacles.
Warnings may be interrupted when driving alongside long vehicles, for example, trucks, for a prolonged time.
Blind Spot Assist is not operational when the reverse gear is engaged.
The exit warning may be limited in the following situations:
when the sensors are covered by adjacent vehicles in narrow parking spaces
when people approach the vehicle
in the event of stationary or slowly moving

The function of brake application (Active Blind Spot Assist)
If Active Blind Spot Assist detects a risk of a side impact in the monitoring range, a course-correcting brake application is carried out. This is designed to help you avoid a collision.
The course-correcting brake application is available in the speed range between approximately 20 mph (30 km/h) and 125 mph (200 km/h).

WARNING
Risk of accident despite brake application of Active Blind Spot Assist A course correcting brake application cannot always prevent a collision.

Always steer, brake or accelerate yourself, especially if Active Blind Spot Assist warns you or makes a course correcting brake application.
Always maintain a safe distance at the sides.

If a course-correcting brake application occurs, the red warning lamp flashes in the outside mirror, and a warning tone sounds. In addition, display 1 indicating the danger of a side collision appears in the Instrument Display. In rare cases, the system may make an inappropriate brake application. This brake application may be interrupted at any time if you steer slightly in the opposite direction or accelerate.

System limits
Note the system limitations of Active Blind Spot Assist; you may otherwise not recognize the dangers (/ page 200). Either a course-correcting brake application appropriate to the driving situation or none at all, may occur in the following situations:

Vehicles or obstacles, e.g. crash barriers, are located on both sides of your vehicle.
A vehicle approaches too closely on the side.
You have adopted a sporty driving style with high cornering speeds.
You brake or accelerate significantly.
A driving safety system intervenes, e.g. ESP® or Active Brake Assist.
ESP® is deactivated.
A loss of tire pressure or a defective tire is detected.

Activating/deactivating Blind Spot Assist or Active Blind Spot Assist
Multimedia system: 4© 5 Settings 5 Assistance

Activate or deactivate Blind Spot Assist.
Activate or deactivate Act. Blind Spot Assist.

Active Lane Keeping Assist

The function of Parking Assist PARKTRONIC Parking Assist PARKTRONIC is an electronic parking assistance system that monitors the area surrounding your vehicle and shows you the distance between the vehicle and a detected obstacle visually and audibly.
Parking Assist PARKTRONIC is only an aid. It is not a substitute for your attention to the surroundings. The responsibility for safe maneuvering and parking remains with you. Make sure that there are no persons, animals or objects in the maneuvering area while maneuvering and parking in/exiting parking spaces.
The passive side impact protection also warns you of obstacles to the side. During the parking procedure or maneuvering, objects are detected as the vehicle drives past. If you steer in the direction of a detected obstacle and there is a risk of a lateral collision, a warning is issued. In order for an object on the side to be detected, the sensors in the front and rear bumper must first detect the object while you are driving past it. In order for front or rear obstacles to the side to be displayed, the vehicle must first travel a distance of at least half a vehicle length. Once the vehicle has traveled one vehicle length, obstacles on all sides can be shown.

Displays on the media display

Vehicles with 360° camera

Vehicles without 360° camera

Vehicles without 360° camera
As soon as Parking Assist PARKTRONIC is operational, the respective areas of the display are shown in blue.

Operational, front and rear
Operational, all around
Obstacles detected at the front left and on the right-hand side
The color of the display changes depending on the distance to the detected obstacle:
Blue: > 3.3 f t (1 m) (no obstacles detected) R Yellow: approximately 3.3 f t (1 m) – 2.3 f t

Orange: approximately 2.3 f t (0.7 m) – 1.2 f t(0.4 m)

Red: <1.2 f t (0.4 m)
Vehicles with 360° camera: the boundary line shifts dynamically depending on the position and distance of the obstacles detected.
Depending on the distance to the obstacle detected, an intermittent warning tone also sounds. You can set the timing of the warnings in the multimedia system(/ page 217).
Standard setting:
Front and sides: < 1.2 f t (0.4 m)
Rear: < 3.3 f t (1 m)
Warn Early All Around:
Front: < 3.3 f t (1 m)
Sides: < 2.3 f t (0.7 m)
Rear: < 3.3 f t (1 m)
A continuous warning tone sounds from a distance of approximately 0.7 f t (0.2 m), regardless of the selected setting.

Vehicles with 360° camera

Vehicles without 360° camera

If an obstacle in the vehicle path is detected and the Camera & Parking menu is not open on the media display, pop-up window 1appears:
vehicles without Active Parking Assist: at speeds below 8 mph (12 km/h)
vehicles with Active Parking Assist: at speeds below 11 mph (18 km/h)

Optionally, obstacles detected by Parking Assist PARKTRONIC from a distance of approximately 3.3 ft (1.0 m) in front 2 and 2.3 f t (0.7 m) on the side 3 can also be displayed on the head-up display.

System limits
Parking Assist PARKTRONIC does not necessarily take into account the following obstacles:

Obstacles below the detection range, e.g. persons, animals or objects.
Obstacles above the detection range, e.g. overhanging loads, overhangs or loading ramps of trucks.
Pedestrians or animals approaching the vehicle from the side.
Objects placed next to the vehicle
Obstacles on the sides are not shown in the following situations, for example:
You park the vehicle and switch it off.
You open the doors.
After an engine start, obstacles must be detected again by driving past them before a warning can be issued.
Observe the information on vehicle sensors and cameras; the system otherwise cannot function properly (/ page 171).

Problems with Parking Assist PARKTRONIC

Vehicles with 360° camera
Vehicles without 360° camera
If the Parking Assist PARKTRONIC display lights up red for approximately three seconds before going out, and the é symbol appears on the instrument cluster, the system may have been deactivated due to signal interference.
Start the vehicle again and check if Parking Assist PARKTRONIC is working at a different location.
If the é symbol appears on the instrument cluster and a warning tone sounds, it may be due to one of the following causes:
The sensors are dirty: clean the sensors and observe the notes on care of vehicle parts (/ page 290).
Parking Assist PARKTRONIC has been deactivated due to a malfunction: restart the vehicle. If the problem persists, consult a qualified specialist workshop.

Activating/deactivating Parking Assist PARKTRONIC

NOTE
Risk of an accident from objects at close range Parking Assist PARKTRONIC may not detect certain objects at close range.

When parking or maneuvering the vehicle, pay particular attention to any objects which are above or below the sensors, e.g. flower pots or drawbars. The vehicle or other objects could otherwise be damaged.# Vehicles without AIR BODY CONTROL: press the é button in the center console.
Vehicles with AIR BODY CONTROL: you can activate or deactivate Parking Assist PARKTRONIC in the multimedia system (/ page 216).
If the indicator lamp in the é button is not lit, Parking Assist PARKTRONIC is active.
If the indicator lamp is lit or the é symbol appears in the Instrument Display, Parking Assist PARKTRONIC is not active.
Parking Assist PARKTRONIC is automatically activated when the vehicle is started.

Activating/deactivating Parking Assist PARKTRONIC using the multimedia system

NOTE
Risk of an accident from objects at close range Parking Assist PARKTRONIC may not detect certain objects at close range.

When parking or maneuvering the vehicle, pay particular attention to any objects which are above or below the sensors, e.g. flower pots or drawbars. The vehicle or other objects could otherwise be damaged.

Requirements

The camera menu is open.
Or: Active Parking Assist is active.
Or: the PARKTRONIC pop-up window appears.
Tap = on the media display.
If the indicator lamp in the é button is not lit, Parking Assist PARKTRONIC is active. If the indicator lamp is lit or the é symbol appears on the instrument cluster, Parking Assist PARKTRONIC is not active.
Parking Assist PARKTRONIC is automatically activated when the vehicle is started.
Alternatively, Parking Assist PARKTRONIC can be activated or deactivated in the quick access menu.

Setting the warning tones of Parking Assist PARKTRONIC

Multimedia system:

4© 5 Settings 5 Assistance 5 Camera & Parking

Adjusting the volume of the warning tones

Select Warning Tone Volume.
Set a value.
Adjusting the pitch of the warning tones
Select Warning Tone Pitch.
Set a value.
Specifying the starting point for the warning tones You can specify whether the Parking Assist PARKTRONIC warning tones should commence when the vehicle is further away from an obstacle.
Select Warn Early All Around.
Activate or deactivate the function.
Activating/deactivating audio fadeout
You can specify whether the volume of a media source in the multimedia system is to be reduced. when Parking Assist PARKTRONIC sounds a warning tone.
Select Audio Fadeout During Warning Tones.
Activate or deactivate the function.

FAQ

Q1: What is the Blind Spot Assist feature in the 2023 Mercedes-Benz E-Class Sedan?

A1: The Blind Spot Assist is a safety feature that helps drivers be aware of vehicles in their blind spots. It uses sensors to monitor adjacent lanes and provides visual or audible alerts if a vehicle is detected in the blind spot.

Q2: How does Blind Spot Assist work?

A2: When a vehicle enters your blind spot area, the Blind Spot Assist system detects it and triggers a warning light in your side mirrors or the side pillars. If you attempt to change lanes with a vehicle in the blind spot, the system might also provide steering wheel vibrations or mild steering intervention to prevent an unsafe maneuver.

Q3: Can Blind Spot Assist detect vehicles approaching from behind at high speeds?

A3: Yes, Blind Spot Assist is designed to detect vehicles in adjacent lanes, including those approaching from behind at varying speeds.

Q4: Is Blind Spot Assist active all the time?

A4: Yes, once enabled, Blind Spot Assist remains active while you’re driving. It continuously monitors your blind spots and provides alerts as needed.

Q5: Does the 2023 Mercedes-Benz E-Class Sedan also have an Exit Warning feature?

A5: Yes, many modern vehicles, including the 2023 E-Class Sedan, are equipped with an Exit Warning feature.

Q6: What is the Exit Warning feature in the 2023 Mercedes-Benz E-Class Sedan?

A6: The Exit Warning feature alerts occupants when it’s not safe to exit the vehicle, such as when a vehicle, cyclist, or pedestrian is approaching from behind.

Q7: How does the Exit Warning feature work?

A7: The Exit Warning feature uses sensors to monitor the area around the vehicle. If it detects a potential hazard approaching from behind while the vehicle is stationary, it will warn occupants not to open the doors.

Q8: Does the Exit Warning feature activate automatically when the vehicle is parked?

A8: Yes, the Exit Warning feature is typically active when the vehicle is parked or stationary and can warn occupants before they open the doors.

Q9: Can I adjust the sensitivity of the Exit Warning feature?

A9: The sensitivity of the Exit Warning feature might be adjustable through the vehicle’s settings menu. This allows you to customize the alerts according to your preference.

Q10: Can I temporarily disable the Blind Spot Assist or Exit Warning features?

A10: Yes, many vehicles offer the option to enable or disable safety features like Blind Spot Assist and Exit Warning through the settings menu.

Q11: Does the Blind Spot Assist replace the need for manually checking blind spots before changing lanes?

A11: No, while Blind Spot Assist is a valuable aid, it’s important to always check your blind spots manually before changing lanes. The system is designed to complement your driving awareness, not replace it.

Q12: Can the Exit Warning feature prevent accidents when opening the doors in crowded areas?

A12: Yes, the Exit Warning feature can help prevent accidents by alerting occupants to potential hazards in their path before they open the doors, especially in congested or busy environments.

Q13: Can the Blind Spot Assist and Exit Warning features detect objects other than vehicles?

A13: While the primary focus of these features is on detecting vehicles, they might also be capable of detecting certain objects, such as pedestrians, cyclists, and larger obstacles.

Q14: Are these features available on all trim levels of the 2023 Mercedes-Benz E-Class Sedan?

A14: The availability of the Blind Spot Assist and Exit Warning features may vary based on the trim level and optional packages of the 2023 E-Class Sedan.

Q15: Do these features require any regular maintenance or calibration?

A15: These features generally don’t require regular maintenance or calibration. However, it’s important to keep the sensors and related components clean and free from obstructions for optimal performance.

Useful Links

View Full User Guide: Mercedes-Benz E-CLASS SEDAN 2023 User Manual | Autouser Guide
Mercedes-Benz E-CLASS SEDAN 2023 Active Brake User Manual

Hyundai Kona-N

2023 Hyundai Kona-N Safe Exit Warning Guidelines

Hyundai Kona-EV 2023 Safe Exit Warning (SEW)

The 2023 Hyundai Kona-N features a novel feature called Safe Exit Warning (SEW), which protects passengers from possible dangers when getting out of the car. SEW deploys modern sensors to vigilantly monitor the Kona-N’s surroundings, assessing the safety of passengers opening their doors to escape. The technology ensures that passengers are aware of any possible hazards outside the car by instantly issuing visual and auditory alerts when it detects impediments or oncoming traffic. A crucial addition to the 2023 Hyundai Kona-N’s array of safety features, SEW can be adjusted to suit different sensitivity preferences and is adaptable, providing protection in confined spaces, urban and highway environments, and both. Its use promotes the safety of both road users and passengers.

2023 Hyundai KONA Specs, Price, Features, Milage (Brochure)

Safe Exit Warning (SEW)

After the vehicle stops, when an approaching vehicle from the rear area is detected after a passenger opens the door, Safe Exit Warning will warn the driver with a warning message and an audible warning to help prevent a collision.

CAUTION
Warning timing may vary depending on the speed of the approaching vehicle.

Detecting sensor

CAUTION For more details on the precautions of the rear corner radars, refer to “Blind-Spot Collision Warning (BCA)” section in this chapter.

Safe Exit Warning Settings Setting features

Safe Exit Warning
With the vehicle on, select ‘Driver on Safe Exit Warning and deselect to turn off the function.

Warning
The driver should always be aware of the surroundings. If ‘Safe Exit Warning’ is deselected, Safe Exit Warning cannot assist you.

Information
If the vehicle is restarted, Safe Exit Warning will maintain the last setting.

Warning Timing
With the vehicle on, select ‘Driver Settings menu to change the initial warning activation time for Safe Exit Warning. When the vehicle is first delivered, change the Warning Timing, the warning time of other Driver Assistance systems may change.

Warning Volume
With the vehicle on, select ‘Driver Warning. If you change the Warning Volume, the warning volume of other Driver Assistance systems may change.

CAUTION

The setting of the Warning Timing and Warning Volume applies to all functions of Safe Exit Warning.
Even though ‘Normal’ is selected for Warning Timing, if a vehicle approaches at high speed from the rear, the warning may seem late.
Select ‘Late’ for Warning Timing when traffic is light and when driving speed is slow

Collision warning when exiting the vehicle

When an approaching vehicle from the rear is detected at a moment a warning message will appear on the cluster, and an audible warning will sound.
Safe Exit Warning will warn the driver when your vehicle’s speed is below 2 mph (3 km/h), and the speed of the approaching vehicle from the rear is above 3 mph (6 km/h).

Warning
Take the following precautions when using Safe Exit Warning:

For your safety, only change the Settings after parking the vehicle at a safe location.
If any other system’s warning message is displayed or an audible warning is generated, a Safe Exit Warning warning message may not be displayed and an audible warning may not be generated.
You may not hear the warning sound of Safe Exit Warning if the surrounding is noisy.
Safe Exit Warning does not operate in all situations and cannot prevent all collisions.
Safe Exit Warning may warn the driver late or may not warn the driver depending on the road and driving conditions. Always check vehicle surroundings.
The driver and passengers are responsible for accidents that occur while exiting the vehicle. Always check the surroundings before you exit the vehicle.
Never deliberately operate Safe Exit Warning. Doing so may lead to serious injury or death.
Safe Exit Warning does not operate if there is a problem with Blind-Spot Collision-Avoidance Assist.
The warning message of Blind-Spot Collision-Avoidance Assist will appear when:
- Blind-Spot Collision-Avoidance Assist sensor or the sensor surrounding is polluted or covered
- Blind-Spot Collision-Avoidance Assist fails to warn passengers or falsely warns passengers

Information
After the vehicle is turned off, Safe Exit Warning operates approximately for 3 minutes but turns off immediately if the doors are locked.

Safe Exit Warning malfunction

When the Safe Exit Warning is not working properly, the ‘Check Blind-Spot Safety cluster for several seconds, and the master ( ) warning light will illuminate on the cluster. If the master warning light illuminates, have the vehicle inspected by an authorized HYUNDAI dealer.

When the outside rearview mirror warning light is not working properly, the ‘Check side view mirror warns the cluster for several seconds, and the master ( ) warning light will illuminate on the cluster. If the master warning light illuminates, have the vehicle inspected by an authorized HYUNDAI dealer.

Safe Exit Warning disabled

When the rear bumper around the rear corner radar or sensor is covered with foreign material, such as snow or rain, or installing a trailer or carrier, it can reduce the detecting performance and temporarily limit or disable Safe Exit Warning. If this occurs, the ‘Blind-Spot Safety message will appear on the cluster. Safe Exit Warning will operate normally when such foreign material or trailer, etc., is removed, and then the vehicle is restarted. If the Safe Exit Warning does not operate normally after it is removed, have the vehicle inspected by an authorized HYUNDAI dealer.

Warning

Even though the warning message does not appear on the cluster, Safe Exit Warning may not properly operate.
Safe Exit Warning may not properly operate in an area (for example, open terrain) where any objects are not detected right after the vehicle is turned on, or when the detecting sensor is blocked with foreign material right after the vehicle is turned on.

CAUTION
Turn off the Safe Exit Warning to install a trailer, carrier, or another attachment. Turn on Safe Exit Warning when finished.

Limitations of Safe Exit Warning
Safe Exit Warning may not operate properly, or it may operate unexpectedly under the following circumstances:

Getting out of the vehicle where trees or grass are overgrown
Getting out of the vehicle where the road is wet
The approaching vehicle is very fast or very slow

Information
For more details on the limitations of the rear corner radar, refer to the “Blind-Spot Collision-Avoidance Assist (BCA)” section in this chapter.

Warning

Safe Exit Warning may not operate properly if interfered by strong electromagnetic waves.
Safe Exit Warning may not operate started, or the rear corner radars are initialized.

Information
This device complies with Part 15 of the FCC rules.

Operation is subject to the following three conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the device.

FAQ

What is Safe Exit Warning (SEW) in the 2023 Hyundai Kona-N?
Safe Exit Warning (SEW) is a safety feature designed to alert passengers when it detects oncoming traffic or obstacles as they attempt to exit the vehicle.

How does SEW work in the Kona-N?
SEW uses sensors, such as radar or cameras, to monitor the vehicle’s surroundings and assess whether it is safe for passengers to open their doors and exit.

Can SEW actively prevent passengers from opening the doors in unsafe conditions in the Kona-N?
SEW provides warnings to passengers but does not physically prevent them from opening the doors; it is primarily an alert system.

What type of alerts does SEW provide in the Kona-N?
SEW typically provides visual and audible alerts to passengers when it detects potential dangers outside the vehicle.

Are there customizable settings for SEW sensitivity in the Kona-N?
Many Kona-N models allow users to adjust the sensitivity of SEW through the vehicle’s settings menu.

Can SEW differentiate between traffic approaching from behind and in front of the vehicle in the Kona-N?
SEW is primarily designed to detect oncoming traffic or obstacles, regardless of whether they are approaching from the front or rear of the vehicle.

Does SEW work at all speeds and in all driving conditions in the Kona-N?
SEW is designed to work at various speeds and in various driving conditions, including urban and highway driving.

Can SEW be turned on and off in the Kona-N?
In most Kona-N models, SEW can be turned on or off by the driver or passengers through the vehicle’s settings.

Is SEW a standard feature in the 2023 Hyundai Kona-N?
SEW may be available as a standard feature or as part of an optional package, depending on the trim level and options chosen for the Kona-N.

Can SEW be affected by factors like dirty sensors or obstructions in the Kona-N?
Yes, like many sensor-based systems, SEW can be affected by factors like dirty sensors or obstructions in its field of view. Keeping sensors clean is advisable for optimal performance.

Does SEW consider factors like weather conditions or road surfaces in the Kona-N?
SEW primarily focuses on detecting obstacles and oncoming traffic, regardless of weather conditions or road surfaces.

Are there any specific recommendations for responding to SEW alerts in the Kona-N?
When SEW alerts are activated, passengers should refrain from opening the doors until the system determines it is safe to do so, helping to prevent potential accidents.

Can SEW be used in conjunction with other safety features in the Kona-N?
Yes, SEW can typically be used alongside other safety features, enhancing overall safety and passenger protection.

Is SEW designed only for the driver’s side doors, or does it also cover the passenger side in the Kona-N?
SEW typically covers both the driver’s and passenger’s side doors, offering protection to all vehicle occupants.

Does SEW have a maximum range for detecting oncoming traffic in the Kona-N?
The range of SEW’s detection capabilities may vary depending on the specific sensors and system design but is generally designed to provide ample warning.

Useful Link

View Full User Guide: Hyundai Kona-N 2023 User Guide
Download Manuals: https://owners.hyundaiusa.com/us/en/resources/manuals-warranties.html
2023 Hyundai KONA Specs, Price, Features, Milage (Brochure)

Hyundai Kona

2023 Hyundai Kona Safe Exit Warning (SEW) Guidelines

Hyundai Kona 2023 Safe Exit Warning (SEW)

The Safe Exit Warning (SEW) system on the 2023 Hyundai Kona is an essential safety feature meant to avert collisions and safeguard occupants, especially during vehicle exits. When the Kona is parked, this clever technology employs sensors to detect oncoming cars or bicycles from the back. It then alerts the occupants—both visually and audibly—if it is unsafe to open the doors. The 2023 Hyundai Kona’s SEW system is a useful addition to the car’s safety suite and demonstrates Hyundai’s dedication to situational awareness and passenger safety by guaranteeing a safe vehicle exit and preventing possible crashes.

2023 Hyundai KONA Specs, Price, Features, Milage (Brochure)

After the vehicle stops, when an approaching vehicle from the rear area is detected as soon as a passenger opens a door, a Safe Exit Warning will warn the driver with a warning message and an audible warning to help prevent a collision.

CAUTION
Warning timing may vary depending on the speed of the approaching vehicle.

Detecting sensor

Rear corner radar
Refer to the picture above for the detailed location of the detecting sensors.

CAUTION
For more details on the precautions of the rear corner radars, refer to the “Blind-Spot Collision-Avoidance Assist (BCA)” section in chapter 7.

Safe Exit Warning Settings Setting features

Safe Exit Warning
With the engine on, select ‘Driver to turn on Safe Exit Warning and deselect to turn off the function.

WARNING
The driver should always be aware of unexpected and sudden situations occurring. If ‘Safe Exit Warning’ is deselected, Safe Exit Warning cannot assist you.

Information
If the engine is restarted, Safe Exit Warning will maintain the last setting.

Warning Volume
With the engine on, select ‘Driver Settings menu to change the Warning Safe Exit Warning. If you change the warning volume, the Warning Volume of other Driver Assistance systems may change.

CAUTION
The setting of the Warning Timing and Warning Volume applies to all functions of the Safe Exit Warning. Even though ‘Normal’ is selected for Warning Timing, if the vehicle approaches at high speed from the rear, the initial warning activation time may seem late. Select ‘Late’ for Warning Timing when traffic is light.

Safe Exit Warning Operation Safe Exit warning

Collision warning when exiting the vehicle
When an approaching vehicle from the rear is detected, the ‘Watch for on the cluster, and an audible warning will sound. Safe Exit Warning will warn the driver when your vehicle’s speed is below 2 mph (3 km/h), and the speed of the approaching vehicle from the rear is above 3 mph (6 km/h).

WARNING
Take the following precautions when using Safe Exit Warning:

For your safety, change the Settings after parking the vehicle at a safe location.
If any other function’s warning message is displayed or an audible warning is generated, Safe Exit Warning’s warning message may not be displayed and an audible warning may not be generated.
You may not hear the warning sound of Safe Exit Warning if the surroundings are noisy.
Safe Exit Warning does not operate in all situations and cannot prevent all collisions.
Safe Exit Warning may warn the driver late or may not warn the driver depending on the road and driving conditions. Always check vehicle surroundings.
The driver and passengers are responsible for accidents that occur while exiting the vehicle. Always check the surroundings before you exit the vehicle.
Never deliberately operate Safe Exit Warning. Doing so may lead to serious injury or death.
Safe Exit Warning does not operate if there is a problem with the Blind-Spot Safety system.
The warning message of the Blind-Spot Safety system will appear when:
- if there is a problem with the Blind-Spot Safety system. The warning message of the Blind-Spot Safety system will appear when:
- Blind-Spot Safety system sensor or the sensor surrounding is polluted or covered
- Blind-Spot Safety system fails to warn passengers or falsely warn passengers

Information
After the engine is turned off, Safe Exit Warning operates approximately for 10 minutes but turns off immediately if the doors are locked.

Safe Exit Warning Malfunction and Limitations
Safe Exit Warning malfunction

When Safe Exit Warning is not working properly, the ‘Check Blind-Spot Safety on the cluster, and the function will turn off automatically or the function will be limited. Have the vehicle be inspected by an authorized HYUNDAI dealer.

Safe Exit Warning disabled

When the rear bumper around the rear corner radar or sensor is covered with foreign material, such as snow or rain, or installing a trailer or carrier, it can reduce the detecting performance and temporarily limit or disable Safe Exit Warning.
If this occurs, the ‘Blind-Spot Safety warning message will appear on the cluster.
Safe Exit Warning will operate normally when such foreign material or trailer, etc., is removed, and then the engine is restarted.
If the Safe Exit Warning does not operate normally after it is removed, have the vehicle be inspected by an authorized HYUNDAI dealer.

WARNING
Even though the warning message does not appear on the cluster, Safe Exit Warning may not properly operate. Safe Exit Warning may not properly operate in an area (for example, open terrain) where any substance are not detected right after the engine is turned on, or when the detecting sensor is blocked with foreign material right after the engine is turned on.

CAUTION
Turn off Safe Exit Warning to install a trailer, carrier, etc., or remove the trailer, carrier, etc., to use Safe Exit Warning.

Limitation of Safe Exit Warning
Safe Exit Warning may not operate normally, or it may operate unexpectedly under the following circumstances:

Getting off the vehicle where trees or grass are overgrown
Getting off the vehicle where the road is wet
The approaching vehicle is very fast or very slow.

Information
For more details on the limitations of the rear corner radar, refer to the “Blind-Spot Collision-Avoidance Assist (BCA)” section in this chapter.

WARNING
Safe Exit Warning may not operate normally if interfered by strong electromagnetic waves. Safe Exit Warning may not operate for 3 seconds after the vehicle is started, or rear corner radars are initialized.

FAQ

What is the 2023 Hyundai Kona Safe Exit Warning feature?

The 2023 Hyundai Kona Safe Exit Warning is a safety feature designed to alert occupants when it is unsafe to open the vehicle’s doors.

How does the Safe Exit Warning system work?

The system uses sensors to detect approaching vehicles from the rear. If a vehicle is detected, it will provide a warning to the occupants not to open the doors.

Is the Safe Exit Warning feature standard on all 2023 Hyundai Kona models?

The availability of the Safe Exit Warning feature may vary depending on the trim level and options chosen. It may be included in certain trim packages or as an optional feature.

What is the purpose of the Safe Exit Warning system?

The main purpose of this system is to prevent accidents or collisions that could occur when occupants open their doors into the path of an oncoming vehicle.

Can you disable the Safe Exit Warning feature?

Hyundai typically allows you to enable or disable safety features like Safe Exit Warning through the vehicle’s settings menu.

Does Safe Exit Warning work only when the vehicle is stationary?

Yes, Safe Exit Warning typically activates when the vehicle is stationary or moving at low speeds, such as when parked or stopped in traffic.

Does the Safe Exit Warning system use cameras or sensors?

It primarily uses sensors, such as radar or ultrasonic sensors, to detect approaching vehicles from the rear.

Does Safe Exit Warning work at night?

Yes, the system is designed to work in various lighting conditions, including nighttime.

Is Safe Exit Warning a standard safety feature, or is it part of an optional package?

The availability of Safe Exit Warning can vary by trim level and package options. It may be standard on some trims and optional on others.

Can the Safe Exit Warning system be customized or adjusted?

Many modern vehicles allow you to adjust the sensitivity or volume of safety warnings, including Safe Exit Warning, through the vehicle’s settings menu.

Does Safe Exit Warning work on both sides of the vehicle?

Typically, Safe Exit Warning systems provide warnings for both the driver and passenger sides of the vehicle.

What type of warning does the system provide to occupants?

The system typically provides audible and visual warnings, such as beeping sounds and warning lights on the side mirrors or interior door panels.

Does Safe Exit Warning replace the need for checking mirrors and blind spots?

No, Safe Exit Warning is a supplementary safety feature. It’s essential to continue checking mirrors and blind spots before opening vehicle doors.

Is Safe Exit Warning a common feature in vehicles today?

Safe Exit Warning and similar safety features are becoming more common in modern vehicles, especially those equipped with advanced driver assistance systems (ADAS).

Does Safe Exit Warning work when parallel parked on a street?

Yes, Safe Exit Warning is particularly useful when parallel parked on a street, as it can warn you of approaching vehicles from behind.

Useful Link

View Full User Guide: Hyundai Kona 2023 User Guide
Download Manuals: https://owners.hyundaiusa.com/us/en/resources/manuals-warranties.html
2023 Hyundai KONA Specs, Price, Features, Milage (Brochure)

Kia Sportage

2023 Kia Sportage Safe Exit Warning and Manual Speed Limit Assist

Kia Sportage 2023 Safe Exit Warning (SEW) and Manual Speed Limit Assist (MSLA)

As safety and driving assistance in cars are always changing, the 2023 Kia Sportage adds two new features that completely change the way passengers and drivers are protected: Safe Exit Warning (SEW) and Manual Speed Limit Assist (MSLA). SEW acts as a silent guardian, using high-tech sensors and cameras to keep an eye on everything around it and make sure that passengers can get off safely, away from oncoming cars or cyclists. On the other hand, MSLA is a big change in how aware drivers are. It does this by combining camera and GPS data in a way that doesn’t affect the data’s integrity. This gives drivers real-time information about speed limits, which lets them keep their cars within the law and leads to safer, more responsible driving. The SEW and MSLA in the 2023 Kia Sportage are more than just features; they show how committed Kia is to driver and passenger safety. They usher in a new era where every trip is not only thrilling but also deeply safe, forever changing the future of automotive innovation.

2023 KIA SPORTAGE Specs, Price, Features and Mileage (Brochure)

Safe Exit Warning (SEW)

After the vehicle stops, when an approaching vehicle from the rear area is detected as soon as a passenger opens a door, Safe Exit Warning will warn the driver with a warning message and an audible warning to help prevent a collision.

CAUTION
Warning Timing may vary depending on the speed of the approaching vehicle.

Detecting sensor

Rear corner radar

Refer to the picture above for the detailed location of the detecting sensors.

Safe Exit Warning settings Setting features

Safe Exit Warning

A: Driver Assistance

Blind-Spot Safety
Safe Exit Warning

With the vehicle on, select Settings→ Driver Assistance → Blind-Spot Safety → Safe Exit Warning from the User Set-tings menu or select Settings→ Vehicle
→ Driver Assistance → Blind-Spot Safety→ Safe Exit Warning from the infotainment system to turn on Safe Exit Warning and deselect to turn off the function.

WARNING
The driver should always be aware of unexpected and sudden situations from occurring. If Safe Exit Warning is deselected, Safe Exit Warning cannot warn you.

NOTICE
If the vehicle is restarted, Safe Exit Warning will maintain the last setting.

Warning Volume

A: Driver Assistance

Warning Volume
High
Medium
Low
With the vehicle on, select Settings→ Driver Assistance → Warning Volume from the User Settings menu or select Settings→ Vehicle → Driver Assis-tance → Warning Volume from the infotainment system to change the warning volume to High, Medium, or Low for Safe Exit Warning.
If you change the warning volume, the warning volume of other Driver Assistance systems may change.

CAUTION
The setting of the Warning Volume applies to all functions of Safe Exit Warning.

Safe Exit Warning operation

Warning
Safe Exit Warning warns the following actions.

Collision warning when exiting vehicle

A: Watch for traffic

The warning light on the side view mirror will blink and the warning message will appear on the cluster, and an audible warning will sound.
Safe Exit Warning will warn under the following circumstances:
- Your vehicle speed: below 2 mph (3 km/h)
- The speed of the approaching vehicle from the rear: above 4 mph (6 km/h)

WARNING
Take the following precautions when using Safe Exit Warning:

For your safety, change the Settings after parking the vehicle at a safe location.
If any other function’s warning message is displayed or audible warning is generated, Safe Exit Warning warn-ing message may not be displayed and audible warning may not be generated.
You may not hear the warning sound of Safe Exit Warning if the surroundings are noisy.
Safe Exit Warning does not operate in all situations or cannot prevent all collisions.
Safe Exit Warning may warn the driver late or may not warn the driver depending on driving conditions. Always check vehicle surroundings.
The driver and passengers are responsible for accidents that occurs while exiting the vehicle. Always check the surroundings before you exit the vehicle.
Safe Exit Warning does not operate if there is a problem with Blind-Spot Collision Warning or Blind-Spot Collision-Avoidance Assist:
- The warning message of Bind Spot Collision Warning or Blind Spot Collision-Avoidance Assist appears.
- Blind-Spot Collision Warning or Blind-Spot Collision-Avoidance Assist sensor or the sensor surroundings are polluted or covered
- Blind-Spot Collision Warning or Blind-Spot Collision-Avoidance Assist fails to warn passengers or falsely warn passengers

NOTICE

After the vehicle is turned off, Safe Exit Warning operates for 3 minutes but turns off immediately if the doors are locked.
Images or colors may be displayed differently depending on the instrument cluster specifications or theme.

Safe Exit Warning malfunction and limitations

Safe Exit Warning malfunction

A: Check the Blind-Spot Safety system
When Safe Exit Warning is not working properly, the warning message will appear on the cluster, and the master warning light ( ) will appear on the cluster. Have Safe Exit Warning inspected by an authorized Kia dealer.

A: Check side view mirror warning light
When the side view mirror warning light is not working properly, the warning message will appear on the cluster for several seconds, and the master warning light ( ) will appear on the cluster. Have Safe Exit Warning inspected by an authorized Kia dealer.

Safe Exit Warning disabled

A: Blind-Spot Safety system disabled. Radar blocked
When the rear bumper around the rear corner radar or sensor is covered with foreign material, such as snow or rain, or installing a trailer or carrier, it can reduce the detecting performance and temporarily limit or disable Safe Exit Warning. If this occurs, the Blind-Spot Safety system disabled. Radar blocked warning message will appear on the cluster. Safe Exit Warning will operate normally when such foreign material or trailer, etc. is removed, and then the vehicle is restarted. If Safe Exit Warning does not operate normally after it is removed, have Safe Exit Warning inspected by an authorized Kia dealer.

WARNING

Even though the warning message does not appear on the cluster, Safe Exit Warning may not properly operate.
Safe Exit Warning may not properly operate in an area (e.g., open terrain), where any substance are not detected right after the vehicle is turned on, or when the detecting sensor is blocked with foreign material right after the vehicle is turned on.

CAUTION
Turn off Safe Exit Warning to install a trailer, carrier, etc., or remove the trailer, carrier, etc. to use Safe Exit Warning.

Limitations of Safe Exit Warning
Safe Exit Warning may not operate normally, or Safe Exit Warning may operate unexpectedly under the following warning.

Getting out of the vehicle where trees or grass are overgrown
Getting out of the vehicle where the road is wet
The approaching vehicle is very fast or very slow

WARNING

Safe Exit Warning may not operate normally if interfered by strong electromagnetic waves.
Safe Exit Warning may not operate for 3 seconds after the vehicle is restarted, or the rear corner radars are initialized.

2023 KIA SPORTAGE Specs, Price, Features and Mileage (Brochure)

Manual Speed Limit Assist (MSLA)

Speed Limit indicator
Set speed
You can set the speed limit when you do not want to drive over a specific speed. If you drive over the preset speed limit, the warning function operates (set speed limit will blink, and chime will sound) until the vehicle speed returns within the speed limit.

Manual Speed Limit Assist operation

Setting speed limit

Press and hold the Driving Assist ( ) button at the desired speed.

The speed limit indicator ( light will appear on the cluster.
Push the + switch up or – switch down, and release it at the desired speed. Push the + switch up or – switch down and hold it. The speed will increase or decrease to the nearest multiple of five (multiple of ten in km/h) at first, and then increase or decrease by 5 mph (10 km/h).
The set speed limit (1) will be displayed on the cluster. If you would like to drive over the preset speed limit, depress the accelerator pedal beyond the pressure point to activate the kick-down mechanism. The set speed limit will blink and chime will sound until you return the vehicle speed within the speed limit.

NOTICE
When the accelerator pedal is not depressed beyond the pressure point, vehicle speed will maintain within the speed limit.

Temporarily pausing Manual Speed Limit Assist

Press the ( ) button to temporarily pause the set speed limit. The set speed limit will turn off but the Speed Limit indicator ( ) will stay on.

Resuming Manual Speed Limit Assist

To resume Manual Speed Limit Assist after the function was paused, operate the +, – switch or ( ) button. If you push the + switch up or – switch down, vehicle speed will be set to the current speed on the cluster. If you press the ( ) button, vehicle speed will resume to the preset speed.

Turning off Manual Speed Limit Assist

Press the Driving Assist ( ) button to turn the Manual Speed Limit Assist off. The Speed Limit indicator ( ) will go off. Always press the Driving Assist ( ) button to turn Manual Speed Limit Assist off when not in use.

WARNING
Take the following precautions when using Manual Speed Limit Assist:

Always set the vehicle speed to the speed limit in your country.
Keep Manual Speed Limit Assist off when the function is not in use, to avoid inadvertently setting a speed. Check that the Speed Limit indicator ( ) is off.
Manual Speed Limit Assist does not substitute for proper and safe driving. It is the responsibility of the driver to always drive safely and should always be aware of unexpected and sudden situations from occurring. Pay attention to the road conditions at all times.

NOTICE
The images or colors may be displayed differently depending on the specifications of the instrument cluster or theme.

FAQ

What is Safe Exit Warning (SEW) in the context of the Kia Sportage 2023?

Safe Exit Warning is a safety feature that helps prevent passengers from opening doors when it may not be safe to do so, such as when a vehicle or cyclist is approaching from behind.

How does SEW work in the Kia Sportage 2023?

SEW uses sensors, often radar or ultrasonic sensors, to detect oncoming traffic or objects and provides visual and audible alerts to occupants to avoid opening doors.

Is SEW customizable in the 2023 Kia Sportage?

SEW settings, such as sensitivity and alert types, may be customizable through the vehicle’s settings menu.

Can SEW be manually turned on or off by the driver or passengers?

SEW can usually be activated or deactivated through the vehicle’s settings, allowing for driver control.

Does SEW work when the vehicle is parked and stationary?

SEW is typically active when the vehicle is stationary and after the ignition is turned off, providing protection for occupants as they exit.

What is Manual Speed Limit Assist (MSLA) in the Kia Sportage 2023?

Manual Speed Limit Assist is a feature that allows drivers to manually set a speed limit, and the vehicle will provide warnings if that limit is exceeded.

How is MSLA set in the 2023 Kia Sportage?

MSLA is often set through the vehicle’s infotainment system or settings menu, where the driver can input the desired speed limit.

What kind of warnings does MSLA provide if the set speed limit is exceeded?

MSLA typically provides visual and audible warnings, such as alerts on the instrument cluster or a notification on the heads-up display.

Can MSLA be overridden by the driver in emergencies or for overtaking purposes?

Drivers can usually override MSLA by pressing down on the accelerator pedal to accelerate beyond the set speed limit. This feature is meant as a driver aid rather than a strict speed limiter.

Is MSLA a standard feature in the 2023 Kia Sportage, or is it an optional add-on?

MSLA may be available as a standard feature on certain trim levels or as part of a safety package, while on others, it could be optional.

Are SEW and MSLA linked to any other advanced driver-assistance systems (ADAS) in the Kia Sportage 2023?

SEW and MSLA may work in conjunction with other ADAS features, such as adaptive cruise control or lane-keeping assist, to enhance overall safety.

Can MSLA help prevent speeding violations in the 2023 Kia Sportage?

MSLA is designed to provide information and assistance to the driver in maintaining legal speeds, but it does not guarantee that the driver will not exceed speed limits. Drivers are ultimately responsible for adhering to speed limits and traffic regulations.

Useful Link

View Full User Guide: Kia Sportage 2023 User Guide
Download Manuals: https://owners.kia.com/content/owners/en/manuals.html
2023 KIA SPORTAGE Specs, Price, Features and Mileage (Brochure)

Kia Sportage

2023 Kia Sportage PHEV Safe Exit Warning And Manual Speed Limit Assist

Kia Sportage PHEV 2023 Safe Exit Warning (SEW) and Manual Speed Limit Assist (MSLA)

The 2023 Kia Sportage PHEV is a cutting-edge crossover SUV that incorporates safety and creativity into every part of its design. Kia has once again set the bar higher with two great features: Safe Exit Warning and Manual Speed Limit Assist. We are now in a new era of car technology. These cutting-edge safety features show that Kia is dedicated to giving customers not only an exciting driving experience but also the peace of mind that comes from knowing they are safe on the road. This detailed guide will go into great detail about Safe Exit Warning and Manual Speed Limit Assist. It will explain how these features work, what benefits they might have, and how they help the 2023 Kia Sportage PHEV stand out as a great choice for drivers who want a better experience in a world that values safety and efficiency. So, buckle up, because the 2023 Kia Sportage PHEV is about to take you on a trip into the future of safety and convenience in cars.

2023 KIA SPORTAGE Specs, Price, Features and Mileage (Brochure)

Safe Exit Warning (SEW)

CAUTION
Warning Timing may vary depending on the speed of the approaching vehicle.

Detecting sensor

Rear corner radar

Refer to the picture above for the detailed location of the detecting sensors.

Safe Exit Warning settings Setting features

Safe Exit Warning

A: Driver Assistance 1 Blind-Spot Safety 2 Safe Exit Warning

With the vehicle on, select Setup → Driver Assistance → Blind-Spot Safety → Safe Exit Warning from the User Settings menu or select Setup → Vehicle→ Driver Assistance → Blind-Spot Safety
→ Safe Exit Warning from the infotainer-ment system to turn on Safe Exit Warn-ing and deselect to turn off the function.

WARNING
The driver should always be aware of unexpected and sudden situations from occurring. If Safe Exit Warning is deselected, Safe Exit Warning cannot warn you.

NOTICE
If the vehicle is restarted, Safe Exit Warn-ing will maintain the last setting.

Warning Volume.

A: Driver Assistance

Warning Volume
High
Medium
Low
With the vehicle on, select Setup → Driver Assistance → Warning Volume from the User Settings menu or select Exit Warning.
If you change the warning volume, the warning volume of other Driver Assistance systems may change. Warning Volume from the infotainment system to change the warning volume to High, Medium or Low for Safe

Exit Warning.
If you change the warning volume, the warning volume of other Driver Assistance systems may change.

CAUTION
The setting of the Warning Volume applies to all functions of Safe Exit Warning.

Safe Exit Warning operation

Warning
Safe Exit Warning warns the following actions.
Collision warning when exiting vehicle

A: Watch for traffic

The warning light on the side view mirror will blink and the warning message will appear on the cluster, and an audible warning will sound.
Safe Exit Warning will warn under the following circumstances:
- Your vehicle speed: below 2 mph (3 km/h)
- The speed of the approaching vehicle from the rear: above 4 mph (6 km/h)

WARNING
Take the following precautions when using Safe Exit Warning:

For your safety, change the Settings after parking the vehicle at a safe location.
If any other function’s warning message is displayed or an audible warning is generated, Safe Exit Warning warning message may not be displayed and an audible warning may not be generated.
You may not hear the warning sound of Safe Exit Warning if the surroundings are noisy.
Safe Exit Warning does not operate in all situations or cannot prevent all collisions.
Safe Exit Warning may warn the driver late or may not warn the driver depending on driving conditions. Always check vehicle surroundings.
The driver and passengers are responsible for accidents that occurs while exiting the vehicle. Always check the surroundings before you exit the vehicle.
Safe Exit Warning does not operate if there is a problem with Blind-Spot Collision Warning or Blind-Spot Collision-Avoidance Assist:
- The warning message of Bind Spot Collision Warning or Blind Spot Collision
- Avoidance Assist appears. Blind-Spot Collision Warning or Blind-Spot Collision-
- Avoidance Assist sensor or the sensor surroundings are polluted or covered
- Blind-Spot Collision Warning or Blind-Spot Collision-Avoidance Assist fails to warn passengers or falsely warn passengers

NOTICE

After the vehicle is turned off, Safe Exit Warning operates for 3 minutes but turns off immediately if the doors are locked.
Images or colors may be displayed differently depends on the instrument cluster specifications or theme.

Safe Exit Warning malfunction and limitations.

Safe Exit Warning malfunction

A: Check Blind-Spot Safety system
When Safe Exit Warning is not working properly, the warning message will appear on the cluster, and the master warning light ( ) will appear on the cluster. Have Safe Exit Warning inspected by an authorized Kia dealer.

Safe Exit Warning disable

A: Blind-Spot Safety system disabled. Radar blocked
When the rear bumper around the rear corner radar or sensor is covered with foreign material, such as snow or rain, or installing a trailer or carrier, it can reduce the detecting performance and temporarily limit or disable Safe Exit Warning.
If this occurs, the Blind-Spot Safety system is disabled. Radar blocked warning message will appear on the cluster.
Safe Exit Warning will operate normally when such foreign material or trailer, etc. is removed, and then the vehicle is restarted.
If Safe Exit Warning does not operate normally after it is removed, have Safe Exit Warning inspected by an authorized Kia dealer.

WARNING

Even though the warning message does not appear on the cluster, Safe Exit Warning may not properly operate.
Safe Exit Warning may not properly operate in an area (e.g., open terrain), where any substance are not detected right after the vehicle is turned on, or when the detecting sensor is blocked with foreign material right after the vehicle is turned on.

CAUTION
Limitations of Safe Exit Warning
Safe Exit Warning may not operate normally, or Safe Exit Warning may operate unexpectedly under the following warning.

Getting out of the vehicle where trees or grass are overgrown
Getting out of the vehicle where the road is wet
The approaching vehicle is very fast or very slow

WARNING

Safe Exit Warning may not operate normally if interfered by strong electromagnetic waves.
Safe Exit Warning may not operate for 3 seconds after the vehicle is restarted, or the rear corner radars are initialized.

Manual Speed Limit Assist (MSLA)

Speed Limit Indicator
Set speed

You can set the speed limit when you do not want to drive over a specific speed. If you drive over the preset speed limit, the warning function operates (set speed limit will blink, and chime will sound) until the vehicle speed returns within the speed limit.

2023 KIA SPORTAGE Specs, Price, Features and Mileage (Brochure)

Manual Speed Limit Assist operation

Setting speed limit

Press and hold the Driving Assist ( ) button at the desired speed.
The speed limit indicator ( light will appear on the cluster.
Push the + switch up or – switch down, and release it at the desired speed. Push the + switch up or – switch down and hold it. The speed will increase or decrease to the nearest multiple of five (multiple of ten in km/h) at first, and then increase or decrease by 5 mph (10 km/h).
The set speed limit (1) will be displayed on the cluster. If you would like to drive over the preset speed limit, depress the accelerator pedal beyond the pressure point to activate the kick-down mechanism.

The set speed limit will blink and chime will sound until you return the vehicle speed within the speed limit.

NOTICE
When the accelerator pedal is not depressed beyond the pressure point, vehicle speed will remain within the speed limit.

Temporarily pausing Manual Speed Limit Assist

Press the ( ) switch to temporarily pause the set speed limit. The set speed limit will turn off but the Speed Limit indicator ( ) will stay on.
Resuming Manual Speed Limit Assist

To resume Manual Speed Limit Assist after the function was paused, operate the +, -, ( ) switch.
If you push the + switch up or – switch down, vehicle speed will be set to the current speed on the cluster.
If you press the ( ) switch, vehicle speed will resume to the preset speed.
Turning off Manual Speed Limit Assist

Press the Driving Assist ( ) button to turn Manual Speed Limit Assist off. The Speed Limit indicator ( off.

Always press the Driving Assist ( ) button to turn Manual Speed Limit Assist off when not in use.

WARNING

Take the following precautions when using Manual Speed Limit Assist:
Always set the vehicle speed to the speed limit in your country.
Keep Manual Speed Limit Assist off when the function is not in use, to avoid inadvertently setting a speed. Check that the Speed Limit indicator () is off.
Manual Speed Limit Assist does not substitute for proper and safe driving. It is the responsibility of the driver to always drive safely and should always be aware of unexpected and sudden situations from occurring. Pay attention to the road conditions at all times.

NOTICE
The images or colours may be displayed differently depending on the specifications of the instrument cluster or theme.

FAQ

What is Safe Exit Warning?

Safe Exit Warning is a safety feature in many modern vehicles that alerts occupants when it may be unsafe to open their doors. This is typically done to prevent accidents with oncoming traffic, cyclists, or pedestrians.

How does Safe Exit Warning work?

Safe Exit Warning systems often use sensors, cameras, or radar to detect approaching vehicles or objects from behind. If an obstacle is detected, the system will provide a warning, such as an audible or visual alert to occupants.

Is Safe Exit Warning standard in the 2023 Kia Sportage PHEV?

You would need to check the specific trim levels and packages of the 2023 Kia Sportage PHEV to determine if Safe Exit Warning is included as a standard feature or an optional one.

What is Manual Speed Limit Assist?

Manual Speed Limit Assist is a feature that allows the driver to set a maximum speed limit for the vehicle. If the driver exceeds this set limit, the system may provide warnings or limit the vehicle’s speed to ensure the driver does not go over the specified speed.

How does Manual Speed Limit Assist work?

The driver can typically set the desired speed limit through the vehicle’s infotainment system or settings. The system will then monitor the vehicle’s speed and provide warnings if the driver exceeds the set limit.

Is Manual Speed Limit Assist standard in the 2023 Kia Sportage PHEV?

The availability of Manual Speed Limit Assist as a standard or optional feature in the 2023 Kia Sportage PHEV would depend on the trim level and package options offered by Kia.

Are there any other safety features in the 2023 Kia Sportage PHEV?

Kia typically includes a range of safety features in their vehicles, such as adaptive cruise control, lane departure warning, blind-spot monitoring, and automatic emergency braking. The specific features may vary by trim level and package.

Can Safe Exit Warning and Manual Speed Limit Assist be customized?

In many vehicles, these features can be customized by the driver to set their preferred settings, such as the speed limit or sensitivity of Safe Exit Warning.

Are there any limitations to these features?

The effectiveness of these features can be influenced by factors such as weather conditions, road conditions, and the accuracy of the vehicle’s sensors and cameras. Drivers should always use their best judgment and pay attention to the road.

Can these features be turned off?

Many vehicles allow drivers to disable or enable these features based on their preferences. Refer to the vehicle’s owner’s manual for instructions on how to do so.

Do these features replace the need for safe driving practices?

No, these features are designed to assist the driver and enhance safety, but they do not replace the need for responsible and attentive driving.

Can these features prevent accidents?

These features can contribute to accident prevention, but they are not infallible. Drivers should remain alert and practice safe driving habits at all times.

Are these features standard in all Kia vehicles?

The availability of these features can vary from one Kia model and trim level to another. It’s essential to check the specific vehicle’s features and options.

Can these features be retrofitted to older Kia Sportage models?

Retrofitting these features to older vehicles can be challenging and may require significant modifications and expense. It’s best to consult with a Kia dealership or a professional automotive technician for advice.

How can I learn more about these features in the 2023 Kia Sportage PHEV?

To get detailed information about the Safe Exit Warning and Manual Speed Limit Assist features in the 2023 Kia Sportage PHEV, you should consult the owner’s manual or visit a Kia dealership for a demonstration and explanation of these features.

Useful Link

View Full User Guide: Kia Sportage PHEV 2023 User Guide
Download Manuals: https://owners.kia.com/content/owners/en/manuals.htm
2023 KIA SPORTAGE Specs, Price, Features and Mileage (Brochure)