Tata Altroz BS VI 2021 Seat Belts with Pre-tensione User Manual

Tata logo

Tata Altroz BS VI 2021 Seat Belts with Pre-tensione User Manual

Seat Belts with Pre-tension

You can use the pre-tensioner seat belts in the same manner as ordinary seat belts. The seat belt pre-tensioner system works in conjunction with the SUPPLEMENTARY RESTRAINTS SYSTEM (SRS-Airbags). In the event of a collision, as may be necessary, the pre-tensioner tightens the seat belt so that it fits the occupant’s body more snugly. When the pre-tensioner activates, there could be some noise and release of smoke. This is normal and there are no health hazards or fire risks.

WARNING
In a collision, the pre-tensioner seat belt assembly mechanism becomes hot during activation. Do not touch the pre-tensioner seat belt assemblies for several minutes after they have been activated. If the vehicle has been involved in a collision, get it inspected immediately at the authorized TATA MOTORS SERVICE Center.

Seat Belts With Load Limiter (if equipped)

You can use the load limiter seat belts in the same manner as ordinary seat belts. The seat belt load limiter system works in conjunction with the SUPPLEMENTARY RESTRAINTS SYSTEM (SRS-Airbags).

In the event of a collision, as may be necessary, load limiter reduces the load on the rib cage region of the occupant. If the vehicle has been involved in a collision, get it inspected immediately at Authorized TATA MOTORS SERVICE Center.

Use of Seat Belts for Pregnant Women

WARNING
Pregnant women must wear a correctly positioned seat belt. It is safer for mother as well as unborn child.
Pregnant woman should wear the lap part of the seat belt across the Pelvic Bone and as snug across the hips as possible. Keep the seat belt low so that it does not come across the abdomen. That way the strong bones of the hips will take the force if there is a collision.Tata Punch User 2021 Seat Belts with Pre-tensione Manual 01

The seat belt warning lamp reminds you to fasten the seat belt.

  • If the driver does not fasten seat belt, the seat belt reminder lamp will blink and a buzzer will sound for predefined du-ration until the driver seat belt is buck-led.
  • If front passenger seat is occupied by adult and does not fasten the seat belt, the seat belt reminder lamp will blink and a buzzer will sound for predefined du-ration until the front passenger seat belt is buckled.
  • If this system is also provided for other than Front row seats, applicable above warning will appear until seat belts are buckled.
  • If front passenger seat is occupied by a child, system may detect occupancy and warn with front passenger seat belt warning. It is not taken to mean child can occupy front passenger seat and use seat belt. Please refer CRS section for recommended seating position.

NOTE
Using unauthorized after-market seat covers may affect the function of the occupant sensor. TATA MOTORS does not recommend any non-validated seat cover on seats.

CHILD RESTRAINT SYSTEM (CRS)

TATA MOTORS strongly recommends the use of Child Restraint Systems (CRS) for all children up to the age of 12 years and to be placed at recommended positions only. Children traveling without recommended CRS and seated at other positions may face serious injuries in case of a collision.
CRS can be installed in the vehicle using seat belts and/or ISOFIX only (if equipped) or ISOFIX with Top Tether (if equipped) or ISOFIX with a support leg.
If the child seat is equipped with support leg(s), always fit the support leg(s) directly to the floor. Never fit support leg(s) to a footrest or on any other object.
The harness system of CRS holds the child in place, and in a collision, acts to keep the child positioned in the seat and reduce the risk of injuries.
All children below the age of two years must always ride in a rear-facing infant CRS.
Keep children in a forward-facing CRS with a harness until they reach the size or weight limit allowed by your CRS manufacturer.
Once your child outgrows the forward-facing CRS, your child is ready for a booster seat.

Selection and Installation of CRS

Always select the CRS that complies with the latest safety standards (AIS072 / ECE R44). The CRS are classified according to the child’s size, height, and weight. Select the appropriate CRS for your child. Ensure that the CRS is securely installed in the vehicle and subsequently the child fits properly in it and wears the harness of the CRS. For installation, please refer to the CRS manufacturer’s instruction manual.Tata Punch User 2021 Seat Belts with Pre-tensione Manual 02

NOTE
The above images are for reference purposes only.

Reference Links

View Full User Guide: Tata Altroz BS VI 2021 User Manual

Download Manuals: https://cars.tatamotors.com/service/owners/owners-manual

  • Tata 2023 Top Accessories

    [amalinkspro_table id=”32452″ new-window=”on” nofollow=”on” addtocart=”off” /]

Leave a Reply

Your email address will not be published. Required fields are marked *