2023 Toyota BZ4X User Guide

Table of Contents

Toyota BZ4X 2023 User Manual

The 2023 Toyota BZ4X ushers in a new era of electric vehicles with its advanced technology, large interior, and long range. Sustainable and stylish, this all-electric SUV is ideal for eco-conscious drivers seeking innovation and comfort.

2023 toyota BZ4x Specs, Price, Features and Mileage (Brochure)

Toyota BZ4X 2023 For safe Use User Guide

2023 Toyota BZ4X For safe Use Instructions

Before driving

Observe the following before starting off in the vehicle to ensure the safety of driving.

Installing floor mats

Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet.

  1. Insert the retaining hooks (clips) into the floor mat eyelets.Toyota BZ4X 2023 User Guide For safe Use (1) Turn the upper knob of each retaining hook (clip) to secure the floor mats in place.Toyota BZ4X 2023 User Guide For safe Use (2)
    Always align the Toyota BZ4X 2023 User Guide For safe Use (3) marks A.

The shape of the retaining hooks (clips) may differ from that shown in the illustration.

WARNING

Observe the following precautions. Failure to do so may cause the driver’s floor mat to slip, possibly interfering with the pedals while driving. An unexpectedly high speed may result or it may become difficult to stop the vehicle. This could lead to an accident, resulting in death or serious injury.

When installing the driver’s floor mat

  • Do not use floor mats designed for other models or different model year vehicles, even if they are Toyota Genuine floor mats.
  • Only use floor mats designed for the driver’s seat.
  • Always install the floor mat securely using the retaining hooks (clips) provided.
  • Do not use two or more floor mats on top of each other.
  • Do not place the floor mat bot-tom-side up or upside-down.

WARNING

Before driving

  • that the floor mat is securely fixed in the correct place with all the provided retaining hooks (clips). Be especially careful to perform this check after cleaning the floor.Toyota BZ4X 2023 User Guide For safe Use, (5)
  • With the engine stopped and the shift lever in P (Automatic transmission) or N (manual transmission), fully depress each pedal to the floor to make sure it does not interfere with the floor mat.

2023 toyota BZ4x Specs, Price, Features and Mileage (Brochure)

For safe driving

For safe driving, adjust the seat and mirror to an appropriate position before driving.

Read all Instructions For safe Use User Guide

Toyota BZ4X 2023 Child safety User Guide

2023 Toyota BZ4X Child safety Instructions

Riding with children

Observe the following precautions when children are in the vehicle. Use a child restraint system appropriate for the child, until the child becomes large enough to properly wear the vehicle’s seat belt.

  • It is recommended that children sit in the rear seats to avoid accidental contact with the steering wheel, wiper switch, etc.
  • Use the rear door child-protector lock or the window lock switch to avoid children opening the door while driving or operating the power window accidentally.
  • Do not let small children operate equipment which may catch or pinch body parts, such as the power window, hood, back door, seats, etc

Child restraint systems

Before installing a child restraint system in the vehicle, there are precautions that need to be observed, different types of child restraint systems, as well as installation methods, etc., written in this manual. Use a child restraint system when riding with a small child that cannot properly use a seat belt. For the child’s safety, install the child restraint system to a rear seat. Be sure to follow the installation method that is in the operation manual enclosed with the restraint system.

Table of contents

  • Points to remember:
  • Child restraint system
  • When using a child restraint system

Child restraint system installation method

  • Fixed with a seat belt:
  • Fixed with a child restraint LATCH anchor:
  • Using an anchor bracket (for top tether strap)

Points to remember

  • The laws of all 50 states of the U.S.A. as well as Canada now require the use of child restraint systems.
  • Prioritize and observe the warnings, as well as the laws and regulations for child restraint systems.
  • Use a child restraint system until the child becomes large enough to properly wear the vehicle’s seat belt.
  • Choose a child restraint system that suits your vehicle and is appropriate to the age and size of the child.

WARNING

  • When a child is riding
  • Observe the following precautions.
  • Failure to do so may result in death or serious injury.
  • For effective protection in automobile accidents and sudden stops, a child must be properly restrained, using a seat belt or child restraint system which is correctly installed.
  • For installation details, refer to the operation manual enclosed with the child restraint system. General installation instructions are provided in this manual.

WARNING

  • Toyota strongly urges the use of a proper child restraint system that conforms to the weight and size of the child, installed on the rear seat. According to accident statistics, the child is safer when properly restrained in the rear seat than in the front seat.
  • Holding a child in your or someone else’s arms is not a substitute for a child restraint system. In an accident, the child can be crushed against the windshield or between the holder and the interior of the vehicle.
  • Handling the child restraint system If the child restraint system is not properly fixed in place, the child or other passengers may be seriously injured or even killed in the event of sudden braking, sudden swerving, or an accident.
  • If the vehicle were to receive a strong impact from an accident, etc., it is possible that the child restraint system has damage that is not readily visible. In such cases, do not reuse the restraint system.
  • Make sure you have complied with all installation instructions provided with the child restraint system manufacturer and that the system is properly secured.
  • Keep the child restraint system properly secured on the seat even if it is not in use. Do not store the child restraint system unsecured in the passenger compartment.
  • If it is necessary to detach the child restraint system, remove it from the vehicle or store it securely in the luggage compartment.

Child restraint system

Types of child restraint system installation methods
Confirm with the operation manual enclosed with the child restraint system about the installation of the child restraint system.Toyota BZ4X 2023 Child safety User Guide FIG (1)

When using a child restraint system

When installing a child restraint system to a front passenger seat

  • For the safety of a child, install a child restraint system to a rear seat.
  • When installing the child restraint system to a front passenger seat is unavoidable, adjust the seat as follows and install the child restraint system.
  • Adjust the seatback angle to the most upright position.
  •  Move the front seat fully rearward. If the passenger seat height can be adjusted, move it to the upper most position.
  •  If the head restraint interferes with the child restraint system installation and the head restraint can be removed, remove the head restraint. Otherwise, put the head restraint in the upper most position

Read all Instructions for Child safety User Guide

Toyota BZ4X 2023 Emergency assistance User Guide

2023 Toyota BZ4X Emergency Assistance

Safety Connect

Safety Connect is a subscription-based telematics service that uses Global Positioning System (GPS) data and embedded cellular technology to provide safety and security features to subscribers. Safety Connect is supported by Toyota’s designated response center, which operates 24 hours per day, 7 days per week. Safety Connect service is available by subscription on select, telematics hardware equipped vehicles. By using the Safety Connect service, you are agreeing to be bound by the Telematics Subscription Service Agreement and its Terms and Conditions, as in effect and amended from time to time, a current copy of which is available at Toyota. com. All use of the Safety Connect service is subject to such then-applicable Terms and Conditions.

System components

  • Microphone
  • “SOS” button
  • LED light indicators
  • SpeakerToyota BZ4X 2023 Emergency assistance 1

Services

Subscribers have the following Safety Connect services available:

Automatic Collision Notification*

  • Helps drivers receive necessary response from emergency service providers
  • U.S. Patent No. 7,508,298 B2
  • Stolen Vehicle Location
  • Helps drivers in the event of vehicle theft.
  • Emergency Assistance Button (“SOS”)
  • Connects drivers to response-center support.
  • Enhanced Roadside Assistance
  • Provides drivers various on-road assistance.

Subscription

After you have signed the Telematics Subscription Service Agreement and are enrolled, you can begin receiving services. A variety of subscription terms are available for purchase. Contact your Toyota dealer, call the following or push the “SOS” button in your vehicle for further subscription details.

  • The United States
  • 1-800-331-4331
  • Canada
  • 1-888-869-6828

NOTICE

  • Safety Connect Services Information
  • Phone calls using the vehicle’s Bluetooth® technology will not be possible during Safety Connect. Safety Connect is available beginning Fall 2009 on select Toyota models (in the contiguous United States only). Contact with the Safety Connect response center is dependent upon the telematics device being in operative condition, cellular connection availability, and GPS satellite signal reception, which can limit the ability to reach the response center or receive emergency service support. Enrollment and Telematics Subscription Service Agreement are required. A variety of subscription terms are available; charges vary by subscription term selected and location.
  • Automatic Collision Notification, Emergency Assistance and Stolen Vehicle Location are available in the United States, including Hawaii and Alaska, as well as and Canada, and Enhanced Roadside Assistance are available in the United  States and Canada.
  • Automatic Collision Notification, Emergency Assistance, Stolen Vehicle and Enhanced Road Assistance will not function in the United States Virgin Islands. For vehicles first sold in the USVI, no Safety Connect services will function in and outside the United States Virgin Islands.
  • Safety Connect services are not subject to section 255 of the Telecommunications Act and the device is not TTY compatible.

Languages
The Safety Connect response center will offer support in multiple languages. The Safety Connect system will offer voice prompts in English, Spanish, and French. Please indicate your language of choice when enrolling.

NOTICE

When contacting the response center You may be unable to contact the response center if the network is busy.

Safety Connect LED light Indicators

When the power switch is turned to ON, the red indicator light comes on for 2 seconds then turns off. Afterward, the green indicator light comes on, indicating that the service is active. The following indicator light patterns indicate specific system usage conditions:

  • Green indicator light on = Active service
  • Green indicator light flashing = Safety Connect call in process
  • Red indicator light (except at vehicle start-up) = System malfunction (contact your Toyota dealer)
  • No indicator light (off) = Safety Connect service not active

Safety Connect services

Automatic Collision Notification
In case of either airbag deployment or severe rear-end collision, the system is designed to automatically call the response center. The responding agent receives the vehicle’s location and attempts to speak with the vehicle occupants to assess the level of emergency. If the occupants are unable to communicate, the agent automatically treats the call as an emergency, contacts the nearest emergency services provider to describe the situation, and requests that assistance be sent to the location.

Stolen Vehicle Location
If your vehicle is stolen, Safety Connect can work with local authorities to assist them in locating and recovering the vehicle. After filing a police report, call the Customer Experience Center at 1-800-331-4331 in the United States, 1-888-869- 6828 in Canada, and follow the prompts for Safety Connect to initiate this service. In addition to assisting law enforcement with the recovery of a stolen vehicle, Safety-Connectequipped vehicle location data may, under certain circumstances, be shared with third parties to locate your vehicle. Further information is available at Toyota.com.

Emergency Assistance Button (“SOS”)

In the event of an emergency on the road, push the “SOS” button to reach the Safety Connect response center. The answering agent will determine your vehicle’s location, assess the emergency, and dispatch the necessary assistance required. If you accidentally press the “SOS” button, tell the response-center agent that you are not experiencing an emergency.

Enhanced Roadside Assistance
Enhanced Roadside Assistance adds GPS data to the already included warranty-based Toyota roadside service. Subscribers can press the “SOS” button to reach a Safety Connect response-center agent, who can help with a wide range of needs, such as: towing, flat tire, fuel delivery, etc. For a description of the Enhanced Roadside Assistance services and their limitations, please see the Safety Connect Terms and Conditions, which are available at Toyota.com

Safety information for Safety Connect

Important! Read this information about exposure to radio frequency signals before using Safety Connect; The Safety Connect system installed in your vehicle is a low-power radio transmitter and receiver. It receives and also sends out radio frequency (RF) signals. In August 1996, the Federal Communications Commission (FCC) adopted RF exposure guidelines with safety levels for mobile wireless phones. Those guidelines are consistent with the safety standards previously set by the following U.S. and international standards bodies.

  • ANSI (American National Standards Institute) C95.1 [1992]
  • NCRP (National Council on Radiation Protection and Measurement) Report 86 [1986]
  • ICNIRP (International Commission on Non-Ionizing Radiation Protection) [1996]

Those standards were based on comprehensive and periodic evaluations of the relevant scientific literature. Over 120 scientists, engineers, and physicians from universities, and government health agencies and industries reviewed the available body of research to develop the ANSI Standard (C95.1). The design of Safety Connect complies with the FCC guidelines in addition to those standards.

Toyota BZ4X 2023 Theft-deterrent system User Guide

2023 Toyota BZ4X Emergency Assistance

Immobilizer system

The vehicle’s keys have built-in transponder chips that prevent the EV system from starting if a key has not been previously registered in the vehicle’s onboard computer. Never leave the keys inside the vehicle when you leave the vehicle. This system is designed to help prevent vehicle theft but does not guarantee absolute security against all vehicle thefts.

Operating the system

The indicator light flashes after the power switch has been turned to OFF to indicate that the system is operating. The indicator light goes off after the power switch has been turned to ACC or ON to indicate that the system has been canceled.
Toyota BZ4X 2023 Theft deterrent system FIG (1)

System maintenance
The vehicle has a maintenance-free type engine immobilizer system.

Conditions that may cause the system to malfunction

  • If the grip portion of the key is in contact with a metallic object
  • If the key is in close proximity to or touching a key registered to the security system (key with a built-in transponder chip) of another vehicle

Read all Instructions for Emergency assistance User Guide

Toyota BZ4X 2023 Electric vehicle system User Guide

2023 Toyota BZ4X Electric features | Driving range and Battery Charging

Electric Vehicle system features

Battery electric vehicles are considerably different from conventional vehicles. They use electricity charged in a traction battery, to drive the electric motor. Since battery electric vehicles are driven using electricity, they do not emit any emissions such as CO2 (Carbon Dioxide) and NOx (Nitrogen Oxides). Battery electric vehicles are environmentally friendly vehicles

System components

The illustration is an example for explanation and may differ from the actual item.

  • ESU: Electricity Supply Unit (built in onboard traction battery charger/DC-DC converter)
  • Electric motor (traction motor)/Inverter (front/rear*)
  • Traction battery
    • Provides electricity to the electric motor.
  • Charging port
  • 12-volt batteryToyota BZ4X 2023 Electric vehicle system fig (1)

When braking (regenerative braking)
The electric motor (traction motor) charges the traction battery. The driving range can be extended by actively using this regenerative braking to store electricity in the traction battery

2023 toyota BZ4x Specs, Price, Features and Mileage (Brochure)

Charging

The battery electric vehicle is driven using electricity, which is received from an external power source and stored in the traction battery. Not only public charging stations, but also household outlets can be used for charging. Procedures are different from refueling a conventional vehicle. Therefore, make sure to read the following thoroughly.

  • Charging equipment
  • AC charging cable
  • Power sources that can be used
  • Things to know before charging
  • How to charge your vehicle
  • When charging cannot be performed normally

Regenerative braking

In the following situations, kinetic energy is converted to electric energy and deceleration force can be obtained in conjunction with the recharging of the traction battery.

  • The accelerator pedal is released while driving with the shift position in D.
  • The brake pedal is depressed while driving with the shift position in D.

Charging the 12-volt battery

The 12-volt battery is charged from the traction battery when the EV system is operated or while the traction battery is being charged. If the vehicle has not been used for a long time, the 12-volt battery may become low due to self-discharge. If this occurs, follow the correct procedures.

When not using the vehicle for an extended period of time

  • When the vehicle will not be used for an extended period of time, charge the traction battery once a month. This protects the traction battery from extreme voltage decline due to self-discharging.
  • When the vehicle will not be used for an extended period of time, the 12-volt battery will be charged from the traction battery to reduce the risk of the 12-volt battery discharged. In this case, the cooling fan may operate, however, it is not a malfunction.
  • To prevent the 12-volt battery from being discharged, do not leave the charging port lid open or the charging cable connected to the vehicle.

Read all Instructions for Electric vehicle system User Guide

Toyota BZ4X 2023 Charging User Guide

2023 Toyota BZ4X Charging Instructions | Detailed Guide

Charging equipment

Charging equipment and names

  • AC charging inlet
  • Charging indicator and Charging inlet light
  • DC charging inlet
  • Charging port lid
  • AC charging cable
  • Charging port

Toyota BZ4X 2023 Charging FIG (1)

Opening/closing the charging port lid

Open
Slightly open the charging port lid by pressing the rear edge of it (the position shown in the illustration) Fully open the charging port lid by hand.Toyota BZ4X 2023 Charging FIG (2)

Close
Move the charging port lid to the slightly open position and then press the rear edge (the position shown in the illustration) to close it.Toyota BZ4X 2023 Charging FIG (3)

Lid lifter

The charging lid is not closed if the lifter is pushing in before closing the charging lid. In that case, while unlocking the door, push again and release the lid lifter, and close the charging lid again.Toyota BZ4X 2023 Charging FIG (4)

Charging port lid open/close detection switch

When the charging port lid is open, do not touch the charging port lid open/close detection switch (Position shown in the figure). If you touch it by mistake, the vehicle may incorrectly display the opened/closed status of the charging port lid, or the charging connector may not be able to lock/unlock normally.Toyota BZ4X 2023 Charging FIG (5)

Charging indicator

The illumination/flashing pattern changes to inform the user of the charging status in the following ways.Toyota BZ4X 2023 Charging FIG (6)

Read all Instructions for Charging User Guide

Toyota BZ4X 2023 Instrument cluster User Guide

2023 Toyota BZ4X Instrument cluster Guidelines

Warning lights and indicators

The warning lights and indicators on the instrument cluster and outside rear view mirrors inform the driver of the status of the vehicle’s various systems

Warning lights and indicators displayed on the instrument cluster

For the purpose of explanation, the following illustrations display all warning lights and indicators illuminatedToyota BZ4X 2023 Instrument cluster fig (1)

Warning lights

Warning lights inform the driver of malfunctions in the indicated vehicle’s systems.

Toyota BZ4X 2023 Instrument cluster fig (2)Brake system warning light*1
Toyota BZ4X 2023 Instrument cluster fig (3)Brake system warning light*1
Toyota BZ4X 2023 Instrument cluster fig (4)Brake system warning light*1
Toyota BZ4X 2023 Instrument cluster fig (5)Charging system warning light*2
Toyota BZ4X 2023 Instrument cluster fig (6)SRS warning light*1
Toyota BZ4X 2023 Instrument cluster fig (7)ABS warning light*1
Toyota BZ4X 2023 Instrument cluster fig (8)ABS warning light*1
Toyota BZ4X 2023 Instrument cluster fig (9)Inappropriate pedal operation warning light*2
Electric power steering system warning light*1
Toyota BZ4X 2023 Instrument cluster fig (4)Electric power steering system warning light*1
Toyota BZ4X 2023 Instrument cluster fig (12)Traction battery charge warning light
Toyota BZ4X 2023 Instrument cluster fig (13)Driver’s and front passenger’s seat belt reminder light
Toyota BZ4X 2023 Instrument cluster fig (14)Rear passengers’ seat belt reminder lights
Toyota BZ4X 2023 Instrument cluster fig (15)Tire pressure warning light*1
Toyota BZ4X 2023 Instrument cluster fig (16)LDA indicator
Toyota BZ4X 2023 Instrument cluster fig (17)LTA indicator
Toyota BZ4X 2023 Instrument cluster fig (18)Driving assist information indicator*1
Toyota BZ4X 2023 Instrument cluster fig 19Intuitive parking assist OFF indicator*1 (if equipped)
Toyota BZ4X 2023 Instrument cluster fig 20Cruise control indicator
Toyota BZ4X 2023 Instrument cluster fig 21Dynamic radar cruise control indicator
Toyota BZ4X 2023 Instrument cluster fig 22PCS warning light*1
Toyota BZ4X 2023 Instrument cluster fig 23Slip indicator*1
Toyota BZ4X 2023 Instrument cluster fig 24Parking brake indicator
Toyota BZ4X 2023 Instrument cluster fig 25Parking brake indicator
Toyota BZ4X 2023 Instrument cluster fig 26Brake hold operated indicator* 1

Read all Instructions for Instrument cluster User Guide

Toyota BZ4X 2023 Key information User Guide

2023 Toyota BZ4X Key information | How To Use

Keys

Key types

The following keys are provided with the vehicle.

Toyota BZ4X 2023 Key information FIG 1

  • A. Electronic keys
    • Operating the smart key system
    • Operating the wireless remote control function
    • Operating the Remote Air Conditioning System
  • B. Mechanical keys
  • C. Key number plate

When riding in an aircraft

When bringing an electronic key onto an aircraft, make sure you do not press any buttons on the electronic key while inside the aircraft cabin. If you are carrying an electronic key in your bag, etc., ensure that the buttons are not likely to be pressed accidentally. Pressing a button may cause the electronic key to emit radio waves that could interfere with the operation of the aircraft.

Electronic key battery depletion

  • The standard battery life is 1 to 2 years.
  • If the battery becomes low, an alarm will sound in the cabin and a message will be displayed on the multi-information display when the EV system stops.
  • To reduce key battery depletion when the electronic key is to not be used for long periods of time, set the electronic key to the battery-saving mode.
  • As the electronic key always receives radio waves, the battery will become depleted even if the electronic key is not used. The following symptoms indicate that the electronic key battery may be depleted. Replace the battery when necessary.
    • The smart key system or the wireless remote control does not operate.
    • The detection area becomes smaller.
    • The LED indicator on the key surface does not turn on.

You can replace the battery by yourself However, as there is a danger that the electronic key may be damaged, it is recommended that replacement is carried out by your Toyota dealer.

To avoid serious deterioration, do not leave the electronic key within 3 ft. (1 m) of the following electrical appliances that produce a magnetic field:

  • TVs
  • Personal computers
  • Cellular phones, cordless phones, and battery chargers
  • Table lamps
  • Induction cookers

If the electronic key is near the vehicle for longer than necessary, even if the smart key system is not operated, the key battery may become depleted faster than normal.

If a message regarding the state of the electronic key or power switch mode, etc. is shown

To prevent trapping the electronic key inside the vehicle, leaving the vehicle carrying the electronic key on your person without turning the power switch to OFF or other passengers from unintentionally taking the key out of the vehicle, etc., a message that prompts the user to confirm the state of the electronic key or power switch mode may be shown on the multi-information display. In those cases, follow the instructions on the display immediately.

If “Key Battery Low Replace Key Battery” is displayed on the multi-information display

The electronic key has a low battery. Replace the electronic key battery.

Replacing the battery

Read all Instructions for Key information User Guide

Toyota BZ4X 2023 Opening, closing and locking the doors User Guide

Toyota BZ4X 2023 Opening, Closing And Locking The Doors Instructions

Side doors

The vehicle can be locked and unlocked using the entry function, wireless remote control, door lock switches or inside lock buttons.

Unlocking and locking the oors from the outside

Using the entry function

  • Carry the electronic key to enable this function.

Toyota BZ4X 2023 Opening, closing the windows and moon roof FIG 5 (2)

  1. Grip the driver’s door handle to unlock the door. Holding the driver’s door handle for approximately 2 seconds unlocks all the doors. Grip the front passenger’s door handle (some models) or rear door handle (some models) to unlock all the doors.
    1. Make sure to touch the sensor on the back of the handle. The doors cannot be unlocked for 3 seconds after the doors are locked.
    2. The door unlocks settings can be changed
  2. Touch the lock sensor (the indentation on the side of the door handle) to lock the doors.
    1. Check that the door is securely locked.

Using the wireless remote control

Toyota BZ4X 2023 Opening, closing the windows and moon roof FIG 5 (3)

  1. Locks all the doors
    1. Check that the door is securely locked.
  2. Unlocks all the doors
  3. Pressing the button unlocks the driver’s door. Pressing the button again within 5 seconds unlocks the other doors. Press and hold to open the side windows.*
    1. This setting must be customized at your Toyota dealer.

Switching the door unlock function

It is possible to set which doors the entry function unlocks using the wireless remote control. Perform the switching operation in the vehicle or within approximately 3.2 ft. (1 m) of the vehicle.

  1. Turn the power switch OFF.
  2. When the indicator light on the key surface is not on, press and hold Toyota BZ4X 2023 Opening, closing the windows and moon roof FIG 5 (4),Toyota BZ4X 2023 Opening, closing the windows and moon roof FIG 5 (5) orToyota BZ4X 2023 Opening, closing the windows and moon roof FIG 5 (6) for approximately 5 seconds while pressing and holdingToyota BZ4X 2023 Opening, closing the windows and moon roof FIG 5 (1).

The setting changes each time an operation is performed, as shown below. (When changing the setting continuously, release the buttons, wait for at least 5 seconds, and repeat step 2.)

Multi-informa- tion dis- play/Beep Unlocking function
  Holding the
  driver’s door handle unlocks only
   
Toyota BZ4X 2023 Opening, closing the windows and moon roof FIG 7

Exterior: Beeps 3 times

the driver’s door.
Holding the pas- passenger’s door handle or pressing the back door
  opener switch
  unlocks all the
  doors.
  Holding a door
Toyota BZ4X 2023 Opening, closing the windows and moon roof FIG 8

Exterior: Beeps twice

handle or pressing the back door opener switch unlocks all the doors.

Vehicles with alarm: To prevent unintended triggering of the alarm, unlock the doors using the wireless remote control and open and close a door once the settings have been changed. (If a door is not opened within 60 seconds afterToyota BZ4X 2023 Opening, closing the windows and moon roof FIG 5 (4) is pressed, the doors will be locked again and the alarm will automatically be set.)

Read all Instructions for Opening, closing and locking the doors User Guide

Toyota BZ4X 2023 Adjusting the seats User Guide

2023 Toyota BZ4X How To Adjusting The Seats

Front seats

The seats can be adjusted (longitudinally, vertically, etc.). Adjust the seat to ensure the correct driving posture.

Adjustment procedure

Manual seat (driver and passenger seat)Toyota-BZ4X-2023-Adjusting-the-seats-User-Guide-FIG- (1)

  • (A) Seat position adjustment lever
  • (B) Seatback angle adjustment lever
  • (C) Vertical height adjustment lever

Power seat (driver seat only)Toyota-BZ4X-2023-Adjusting-the-seats-User-Guide-FIG- (2)

  • (A) Seat position adjustment switch
  • (B) Seat cushion (front) angle adjustment switch
  • (C) Seatback angle adjustment switch
  • (D) Vertical height adjustment switch
  • (E) Lumbar support adjustment switch

When adjusting the seat

  • Make sure that any surrounding passengers or objects are not contact the seat.
  • Take care when adjusting the seat so that the head restraint does not touch the ceiling and sun visor.

2023 toyota BZ4x Specs, Price, Features and Mileage (Brochure)

WARNING
When adjusting the seat position

  • Take care when adjusting the seat position to ensure that other passengers are not injured by the moving seat
  • Do not put your hands under the seat or near the moving parts to avoid injury.
    Fingers or hands may become jammed in the seat mechanism.
  • Make sure to leave enough space around the feet so they do not get stuck.
  • Manual seat only: After adjusting the seat, make sure that the seat is locked in position.

Seat adjustment

To reduce the risk of sliding under the lap belt during a collision, do not recline the seat more than necessary.
If the seat is too reclined, the lap belt may slide past the hips and apply restraint forces directly to the abdomen, or your neck may contact the shoulder belt, increasing the risk of death or serious injury in the event of an accident. Adjustments should not be made while driving as the seat may unexpectedly move and cause the driver to lose control of the vehicle.

Read all Instructions for Adjusting the seats User Guide

Toyota BZ4X 2023 Adjusting the steering wheel and mirrors User Guide

2023 Toyota BZ4X Adjusting the steering wheel and mirrors Instructions

Steering wheel

Adjustment procedure

  1.   Hold the steering wheel and push the lever downToyota BZ4X-2023--Adjusting-the-steering-wheel-and-mirrors User-Guide-FIG- (1)
  2. Adjust to the ideal position by moving the steering wheel horizontally and vertically.

After adjustment, pull the lever up to secure the steering wheel.Toyota BZ4X-2023--Adjusting-the-steering-wheel-and-mirrors User-Guide-FIG- (2)

WARNING

  • Caution while driving
    • Do not adjust the steering wheel while driving.
    • Doing so may cause the driver to mishandle the vehicle and cause an accident, resulting in death or serious injury.
  • After adjusting the steering wheel
    • Make sure that the steering wheel is securely locked.
    • Otherwise, the steering wheel may move suddenly, possibly causing an accident, and resulting in death or serious injury. Also, the horn may not sound if the steering wheel is not securely locked.

Sounding the horn

To sound the horn, press on or close to the Toyota BZ4X-2023--Adjusting-the-steering-wheel-and-mirrors User-Guide-FIG- (3) mark.
Toyota BZ4X-2023--Adjusting-the-steering-wheel-and-mirrors User-Guide-FIG- (4)

Inside rearview mirror

  • If equipped

The rear view mirror’s position can be adjusted to enable sufficient confirmation of the rearview.

Adjusting the height of rearview mirror

  • The height of the rearview mirror can be adjusted to suit your driving posture.
  • Adjust the height of the rearview mirror by moving it up and down.Toyota BZ4X-2023--Adjusting-the-steering-wheel-and-mirrors User-Guide-FIG- (5)

WARNING

  • Caution while driving
    • Do not adjust the position of the mirror while driving.
    • Doing so may lead to mishandling of the vehicle and cause an accident, resulting in death or serious injury

Anti-glare function (vehicles with manual antiglare inside rear view mirror)

Reflected light from the headlights of vehicles behind can be reduced by operating the lever.Toyota BZ4X-2023--Adjusting-the-steering-wheel-and-mirrors User-Guide-FIG- (6)

  1. Normal position
  2. Anti-glare position

Anti-glare function (vehicles with auto anti-glare inside rear view mirror)

Responding to the level of brightness of the headlights of vehicles behind, the reflected light is automatically reduced.

  • Changing automatic anti-glare function mode on/off
  • When the automatic anti-glare function is in ON mode, the indicator (A) illuminates.
  • The function will set to ON mode each time the power switch is turned to ON.
  • Pressing the button turns the function to OFF mode. (The indicator (A)also turns off.)Toyota BZ4X-2023--Adjusting-the-steering-wheel-and-mirrors User-Guide-FIG- (7)

Read all Instructions for Adjusting the steering wheel and mirrors User Guide

Toyota BZ4X 2023 Opening, closing the windows and Favorite settings User Guide

Toyota BZ4X 2023 Opening, Closing the Windows And Favorite Settings

Power windows

Opening and closing the power windows

The power windows can be opened and closed using the switches.

Operating the switch moves the side windows as follows:Toyota-BZ4X-2023-Opening,-closing-the-windows-User-Guide-fig- (1)

  1. Closing
  2. One-touch closing
  3. Opening
  4. One-touch opening

To stop the side window partway, operate the switch in the opposite direction.

The power windows can be operated when

The power switch is in ON.

Operating the power windows after turning the EV system off

The power windows can be operated for approximately 45 seconds even after the power switch is turned to ACC or OFF. They cannot, however, be operated once either front door is opened.

Jam protection function

If an object becomes jammed between the side window and the window frame while the side window is closing, side window movement is stopped and the side window is opened slightly.

Catch protection function

If an object becomes caught between the door and side window while the side window is opening, side window movement is stopped.

When the power window cannot be opened or closed

  • When the jam protection function or catch protection function operates unusually and the side window cannot be opened and closed, perform the following operations with the power window switch of that door.
  • Stop the vehicle. With the power switch in ON, within 4 seconds of the jam protection function or catch protection function activating, continuously operate the power window switch in the onetouch closing direction or one-touch opening direction so that the side window can be opened and closed.
  • If the side window cannot be opened and closed even when performing the above operations, perform the following procedure for function initialization.
    • Turn the power switch to ON.
    • Pull and hold the power window switch in the one-touch closing direction and completely close the side window.
    • Release the power window switch for a moment, resume pulling the switch in the one-touch closing direction, and hold it there for approximately 6 seconds or more.
    • Press and hold the power window switch in the one-touch opening direction. After the side window is completely opened, continue holding the switch for an additional 1 second or more.
    • Release the power window switch for a moment, resume pushing the switch in the one-touch opening direction, and hold it there for approximately 4 seconds or more.
    • Pull and hold the power window switch in the one-touch closing direction again. After the side window is completely closed, continue holding the switch for a further 1 second or more.

If you release the switch while the side window is moving, start again from the beginning.
If the side window reverses and cannot be fully closed or opened, have the vehicle inspected by your Toyota dealer

Door lock linked power window operation

  • The power windows can be opened and closed using the mechanical key
  • The power windows can be opened using the wireless remote control.
  • The alarm may be triggered if the alarm is set and the power window is closed using the door lock-linked power window operation function.

These settings must be customized at your Toyota dealer

Power window open reminder function

The buzzer sounds and a message is shown on the multi-information display when the power switch is turned to OFF and the driver’s door is opened with the power windows open.

Customization
Some functions can be customized.

WARNING

Observe the following precautions. Failing to do so may result in death or serious injury.

  • Closing the power windows
    • The driver is responsible for all the power window operations, including the operation for the passengers. In order to prevent accidental operation, especially by a child, do not let a child operate the power windows. It is possible for children and other passengers to have body parts caught in the power window. Also, when riding with a child, it is recommended to use the window lock switch.
    • Check to make sure that all passengers do not have any part of their body in a position where it could be caught when a power window is being operated.Toyota-BZ4X-2023-Opening,-closing-the-windows-User-Guide-fig- (2)
      When using the wireless remote control or mechanical key and operating the power windows, operate the power window after checking to make sure that there is no possibility of any passenger having any of their body parts caught in the side window. Also, do not let a child operate the power window by the wireless remote control or mechanical key. It is possible for children and other passengers to get caught in the power window.
    • When exiting the vehicle, turn the power switch to OFF, carry the key and exit the vehicle along with the child. There may be accidental operation, due to mischief, etc., that may possibly lead to an accident.
  • Jam protection function
    • Never use any part of your body to intentionally activate the jam protection function.
    • The jam protection function may not work if something gets jammed just before the side window is fully closed. Be careful not to get any part of your body jammed in the side window.
  • Catch protection function
    • Never use any part of your body or clothing to intentionally activate the catch protection function.
    • The catch protection function may not work if something gets caught just before the side window is fully opened. Be careful not to get any part of your body or clothing caught in the side window.

Read all Instructions for Opening, closing the windows and Favorite settings User Guide

Toyota BZ4X 2023 Before driving User Guide

2023 Toyota BZ4X Before Your First Driving

Driving the vehicle

The following procedures should be observed to ensure safe driving

Driving procedure

Before starting the EV system

Check that the charging cable is disconnected.

Starting the EV system

Driving

  1. With the brake pedal depressed, shift the shift position to D.
    1. Check that the shift position indicator shows D.
  2. If the parking brake is set, release the parking brake.
    1. If the parking brake is in automatic mode, the parking brake will be released automatically.
  3. Gradually release the brake pedal and gently depress the accelerator pedal to accelerate the vehicle.

Stopping

  1. Depress the brake pedal.
  2. If necessary, set the parking brake.

If the vehicle is to be stopped for an extended period of time, shift the shift position to P.

Parking the vehicle

  1. Depress the brake pedal to stop the vehicle completely.
  2. If the parking brake is released, set the parking brake.
    1. Make sure the parking brake indicator light is on.
  3. Shift the shift position to P.
    1. Check that the shift position indicator shows P and the parking brake indicator is illuminated.
  4. Press the power switch to stop the EV system.
  5. Slowly release the brake pedal.
  6. Lock the door, making sure that you have the electronic key on your person.

If parking on a hill, block the wheels as needed.

Starting off on a steep uphill

  1. Firmly depress the brake pedal and shift the shift position to D.
    1. The hill-start assist control will be activated.
  2. Set the parking brake.
  3. Release the brake pedal and gently depress the accelerator pedal to accelerate the vehicle.
  4. Release the parking brake.

When starting off on an uphill

The hill-start assist control will activate.

Driving in the rain

  • Drive carefully when it is raining, because visibility will be reduced, the windows may become fogged up, and the road will be slippery.
  • Drive carefully when it starts to rain because the road surface will be especially slippery.
  • Refrain from high speeds when driving on an expressway in the rain, because there may be a layer of water between the tires and the road surface, preventing the steering and brakes from operating properly.

Read all Instructions for Before driving User Guide

Toyota BZ4X 2023 Driving procedures User Guide

2023 Toyota BZ4X Driving procedures Guidance

Power (ignition) switch

Performing the following operations when carrying the electronic key on your person starts the EV system or changes power switch modes.

Starting the EV system

  1. Check that the charging cable is disconnected.
  2. Pull the parking brake switch to check that the parking brake is set.
    The parking brake indicator will come on.
  3. Firmly depress the brake pedal. Toyota-BZ4X-2023-Driving-procedures-User-Guide-fig- (2) and a message will be displayed on the multi-information display.
    If it is not displayed, the EV system cannot be started.
    When the shift position is in N, the EV system cannot start. Shift the shift position to P when starting the EV system.
  4. Press the power switch shortly and firmly.
    When operating the power switch, one short, firm press is enough. It is not necessary to press and hold the switch.
    If the “READY” indicator turns on, the EV system will operate normally. Continue depressing the brake pedal until the “READY” indicator is illuminated.
    The EV system can be started from any power switch mode.Toyota-BZ4X-2023-Driving-procedures-User-Guide-fig- (1)
  5. Check that the “READY” indicator is illuminated

The vehicle cannot be driven if the  “READY” indicator is off

Power switch illumination According to the situation, the power switch illumination operates as follows.

  • When the driver’s door or front passenger’s door is opened, the power switch illumination illuminates.
  • When the power switch is OFF and depressing the brake pedal with carrying the electronic key on your person, the power switch illumination blinks.
  • When the power switch is in ACC or ON, the power switch illumination illuminates.
  • When the power switch mode is changed from ACC or ON to OFF, the power switch illumination illuminates for a certain amount of time. Afterward, the power switch illumination turns off.

If the EV system does not start

  • The immobilizer system may not have been deactivated.  Contact your Toyota dealer.
  • The charging cable may be connected to the vehicle.
  • If a message related to start-up is shown on the multi-information display, read the message and follow the instructions.
  • If the door is unlocked with the mechanical key, the EV system cannot be started using the smart key system. However, if the electronic key is carried inside the vehicle and the doors are locked (P.170), the EV system can be started

When the ambient temperature is low, such as during winter driving conditions

  • When starting the EV system, the flashing time of the “READY” indicator may be long. Leave the vehicle as it is until the “READY” indicator is steady on, as steady means the vehicle is able to move.
  • When the traction battery is extremely cold (below approximately -22°F [-30°C]) under the influence of the outside temperature, it may not be possible to start the EV system. In this case, try to start the EV system again after the temperature of the traction battery increases due to the outside temperature increase, etc.

Sounds and vibrations specific to a battery electric vehicle

If the 12-volt battery is discharged

The EV system cannot be started using the smart key system.

Electronic key battery depletion
Conditions affecting operation
Note for the entry function

If there is a malfunction in the smart key system

If “Smart Key System Malfunction” is displayed on the multi-information display, the system may be malfunction.
Have the vehicle been inspected by your Toyota dealer immediately?

If the “READY” indicator does not come on

In the event that the “READY” indicator does not come on even after performing the proper procedures for starting the vehicle, contact your Toyota dealer immediately.
If the EV system is malfunctioning
Electronic key battery

Read all Instructions for Driving procedures User Guide

Toyota BZ4X 2023 Operating the lights and wipers User Guide

2023 Toyota BZ4X Operating The Lights And Wipers 

Headlight switch

The headlights can be operated manually or automatically.

Turning on the headlights

Operating theToyota BZ4X 2023 Operating the lights and wipers FIG 1 switch turns on the lights as follows:

Toyota BZ4X 2023 Operating the lights and wipers FIG 2

  • A. U.S.A.
  • B. Canada
  1. Toyota BZ4X 2023 Operating the lights and wipers FIG 3The side marker, parking, tail, license plate, instrument panel lights, and daytime running lights turn on.
  2. Toyota BZ4X 2023 Operating the lights and wipers FIG 4The headlights and all lights listed above (except daytime running lights) turn on.
  3. Toyota BZ4X 2023 Operating the lights and wipers FIG 6The headlights, daytime running lights and all the lights listed above turn on and off automatically.
  4. Toyota BZ4X 2023 Operating the lights and wipers FIG 7Off (for the U.S.A. only)

AUTO mode can be used when

  • The power switch is in ON.

Daytime running light system

  • The daytime running lights illuminate using the same lights as the parking lights and illuminate but at a higher intensity. (On some models: Using the same lights as the headlights but at a lower intensity.)
  • To make your vehicle more visible to other drivers during daytime driving, the daytime running lights turn on automatically when all of the following conditions are met. (The daytime running lights are not designed for use at night.)
    • The EV system is operating
    • The parking brake is released
    • The headlight switch is in the orToyota BZ4X 2023 Operating the lights and wipers FIG 3 position
    • The surroundings are bright

The daytime running lights remain on after they illuminate, even if the parking brake is set again.

  • For the U.S.A.: Daytime running lights can be turned off by operating the switch.
  • Compared to turning on the headlights, the daytime running light system offers greater durability and consumes less electricity, so it can help improve electricity consumption.

Headlight control sensor

The sensor may not function properly if an object is placed on the sensor or if anything that blocks the sensor is affixed to the windshield. Doing so interferes with the sensor detecting the level of ambient light and may cause the automatic headlight system to malfunction.

Toyota BZ4X 2023 Operating the lights and wipers FIG 5

Automatic light off system

  • When the headlights are on: The lights turn off 30 seconds after the power switch is turned to ACC or OFF and a door is opened and closed. (The lights turn off immediately if Toyota BZ4X 2023 Opening, closing the windows and moon roof FIG 5 (1)the key is pressed after all the doors are closed.)
  • When only the tail lights are on: The tail lights turn off automatically if the power switch is turned to ACC or OFF and the driver’s door is opened. To turn the lights on again, turn the power switch to ON, or turn the light switch to theToyota BZ4X 2023 Operating the lights and wipers FIG 6 or Toyota BZ4X 2023 Operating the lights and wipers FIG 7position once and then back to Toyota BZ4X 2023 Operating the lights and wipers FIG 3or Toyota BZ4X 2023 Operating the lights and wipers FIG 4position.

Light reminder buzzer

  • A buzzer sounds when the power switch is turned to ACC or OFF and the driver’s door is opened while the lights are turned on.

The automatic headlight leveling system

The level of the headlights is automatically adjusted according to the number of passengers and the loading condition of the vehicle to ensure that the headlights do not interfere with other road users.

Windshield wiper linked headlight illumination

When driving during the daytime with the headlight switch turned toToyota BZ4X 2023 Operating the lights and wipers FIG 6, if the windshield wipers are used, the headlights will turn on automatically after several seconds to help enhance the visibility of your vehicle.

12-volt battery-saving function

In order to prevent the 12-volt battery of the vehicle from discharging, if the headlights and/or tail lights are on when the power switch is turned to OFF, the battery saving function will operate and automatically turn off all the lights after approximately 20 minutes. When any of the following are performed, the 12-volt battery-saving function is canceled once and then reactivated. All the lights will turn off automatically 20 minutes after the 12-volt battery-saving function has been reactivated:

Read all Instructions for Operating the lights and wipers User Guide

Toyota BZ4X 2023 Using the driving Support System User Guide

https://autouserguide.com/wp-admin/post.php?post=8711&action=edit

Software update

It is necessary to enter a connected services contract, provided by Toyota, to use these functions. For details, contact your Toyota dealer.

WARNING

For safe use

  • When the Toyota Safety Sense 3.0 software is updated, the operating methods of functions may change. Using this system without knowing the correct operating methods may lead to an accident resulting in death or serious injury.
  • Make sure to read the Digital Owner’s Manual which corresponds to the software version of the system, available at the Owner’s Manual website, before using this system.

Content of the Toyota Safety Sense 3.0 Owner’s Manual

This Owner’s Manual contains information for Ver. 1. For the latest information about the controls, use, warnings/precautions, etc. of each function of Toyota Safety Sense 3.0, refer to the Digital Owner’s Manual at the Owner’s Manual website.
If the software of this system has been updated after the initial purchase of the vehicle, before using this system, be sure to read the Owner’s Manual which corresponds to the software version of the system.

Precautions for use

  • Be aware that some functions may temporarily be disabled if a legal or safety-related issue occurs.
  • If a connected services contract has not been entered or has expired, software updates will not be able to be performed wirelessly.

Checking your vehicle’s Toyota Safety Sense 3.0 version

If the software of this system has been updated after the initial purchase of the vehicle, to access the appropriate Owner’s Manual, it is necessary to check the software version of the system and then visit the Owner’s Manual website.

Checking the version using OneApp

The software version of the system can be checked using OneApp.

Using your vehicle’s Toyota Safety Sense 3.0 version

  1. Access the following URL using a computer or smartphone:
    1. For U.S.A owners
      https://www.toyota.com/owners/resources/warranty-owners-manuals/manual?om=om42c01u.bz4x.2023.2203.ev.vh

Toyota BZ4X 2023 Using the driving Support System FIG (1)

    1. For Canadian owners
      https://www.toyota.ca/toyota/owners/manual?om=om42c01u.bz4x.2023.2203.ev.vh

Toyota BZ4X 2023 Using the driving Support System FIG (2)

  1. Select the file which includes the previously checked system version.

Updating the software

If a software update is available, a notification will be displayed by OneApp. Follow the instructions displayed on the screen.

Software update precautions

  • After a software update has been performed, it will not be possible to revert to a previous version.
  • Depending on the communication environment and the content of an update, a software update may take several hours. Although an update will be suspended when the power switch is turned off, it will resume when the power switch is changed back to ON.
  • Toyota Safety Sense 3.0 can still be used while a software update is being performed.

What can be checked using the OneApp

The following items can be checked or performed.

  • Software version, update details, precautions, use methods, etc.
  • Software update

Toyota Safety Sense 3.0

The Toyota Safety Sense 3.0 consists of the driving assist systems and contributes to a safe and comfortable driving experience:

WARNING

  • Toyota Safety Sense 3.0
    • The Toyota Safety Sense 3.0 operates under the assumption that the driver will drive safely, and is designed to help reduce the impact to the occupants in a collision and assist the driver under normal driving conditions.
    • As there is a limit to the degree of recognition accuracy and control performance that this system can provide, do not overly rely on this system. The driver is solely responsible for paying attention to the vehicle’s surroundings and driving safely.
  • For safe use
    • Do not overly rely on this system. The driver is solely responsible for paying attention to the vehicle’s surroundings and driving safely. This system may not operate in all situations and provided assistance is limited. Over-reliance on this system to drive the vehicle safely may lead to an accident resulting in death or serious injury.
    • Do not attempt to test the operation of the system, as it may not operate properly, possibly leading to an accident.
    • If attention is necessary while performing driving operations or a system malfunction occurs, a warning message or warning buzzer will be operated. If a warning message is displayed on the display, follow the instructions displayed.
    • Depending on external noise, the volume of the audio system, etc. it may be difficult to hear the warning buzzer. Also, depending on the road conditions, it may be difficult to recognize the operation of the system.
  • When it is necessary to disable the system In the following situations, make sure to disable the system.
    Failure to do so may lead to the system not operating properly, possibly leading to an accident resulting in death or serious injury
    • When the vehicle is tilted due to being overloaded or having a flat tire
    • When driving at extremely high speeds
    • When towing another vehicle
    • When the vehicle is being transported by a truck, ship, train, etc.
    • When the vehicle is raised on a lift and the tires are allowed to rotate freely
    • When inspecting the vehicle using a drum tester such as a chassis dynamometer or speedometer tester, or when using an on vehicle wheel balancer
    • When the vehicle is driven in a sporty manner or off-road
    • When using an automatic car wash

WARNING

  • When a sensor is misaligned or deformed due to a strong impact being applied to the sensor or the area around the sensor
  • When accessories that obstruct a sensor or light are temporarily installed to the vehicle
  • When a compact spare tire or tire chains are installed to the vehicle or an emergency tire puncture repair kit has been used
  • When the tires are excessively worn or the inflation pressure of the tires is low
  • When tires other than the manufacturer-specified size are installed
  • When the vehicle cannot be driven stably, due to a collision, malfunction, etc.

Read all Instructions for Using the driving Support System User Guide

Toyota BZ4X 2023 Driving tips User Guide

2023 Toyota BZ4X Driving Tips Instructions

Winter driving tips

Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a manner appropriate to the prevailing weather conditions.

Pre-winter preparations

  • Use fluids that are appropriate to the prevailing outside temperatures.
  • Power control unit coolant
  • Heater coolant
  • Washer fluid
  • Have a service technician inspect the condition of the 12-volt battery
  • Have the vehicle fitted with four snow tires or purchase a set of tire chains for the front tires.
  • Ensure that all tires are the same size and brand, and that chains match the size of the tires.

WARNING

  • Driving with snow tires Observe the following precautions to reduce the risk of accidents. Failure to do so may result in a loss of vehicle control and cause death or serious injury.
  • Use tires of the specified size.
  • Maintain the recommended level of air pressure. Do not drive in excess of 75 mph (120 km/h), regardless of the type of snow tires being used.
  • Use snow tires on all, not just some wheels.
  • Driving with tire chains Observe the following precautions to reduce the risk of accidents. Failure to do so may result in the vehicle being unable to be driven safely, and may cause death or serious injury.
  • Do not drive in excess of the speed limit specified for the tire chains being used, or 30 mph (50 km/h), whichever is lower.
  • Avoid driving on bumpy road surfaces or over potholes.
  • Avoid sudden acceleration, abrupt steering, sudden braking and shifting operations that cause sudden regenerative braking.
  • Slow down sufficiently before entering a curve to ensure that vehicle control is maintained.
  • Do not use LTA (Lane Tracing Assist).

NOTICE

Repairing or replacing snow tires Request repairs or replacement of snow tires from your Toyota dealer or legitimate tire retailers. This is because the removal and attachment of snow tires affects the operation of the tire pressure warning valves and transmitters

Before driving the vehicle

Perform the following according to the driving conditions:

  •  Do not try to forcibly open a window or move a wiper that is frozen. Pour warm water over the frozen area to melt the ice. Wipe away the water immediately to prevent it from freezing.
  •  To ensure proper operation of the climate control system fan, remove any snow that has accumulated on the air inlet vents in front of the windshield.
  •  Check for and remove any excess ice or snow that may have accumulated on the exterior lights, vehicle’s roof, chassis, around the tires or on the brakes.
  •  Remove any snow or mud from the bottom of your shoes before getting in the vehicle.

When driving the vehicle

Accelerate the vehicle slowly, keep a safe distance between you and the vehicle ahead, and drive at a reduced speed suitable to road conditions.

When parking the vehicle

Turn automatic mode of the parking brake off. Otherwise, the parking brake may freeze and not be able to be released automatically. Also, avoid using the following as the parking brake may operate automatically, even if automatic mode is off.

    • Brake hold system
    • Remote parking function
  • Park the vehicle and shift the shift position to P without setting the parking brake. The parking brake may freeze up, preventing it from being released. If the vehicle is parked without setting the parking brake, make sure to block the wheels. Failure to do so may be dangerous because it may cause the vehicle to move unexpectedly, possibly leading to an accident. When the parking brake is in automatic mode, release the parking brake after shifting the shift position to P.
  • If the vehicle is parked without setting the parking brake, confirm that the shift position cannot be moved out of P.
  • If the vehicle is left parked with the brakes damp in cold temperatures, there is a possibility of the brakes freezing..

WARNING

When parking the vehicle When parking the vehicle without applying the parking brake, make sure to chock the wheels. If you do not chock the wheels, the vehicle may move unexpectedly, possibly resulting in an accident.

Selecting tire chains

Vehicles with 17-inch tires
Use the correct tire chain size when mounting the snow chains. Chain size is regulated for each tire size.

Toyota BZ4X 2023 Driving tips 1

Side chain:

  • 0.12 in. (3 mm) in diameter
  • 0.39 in. (10 mm) in width
  • 1.18 in. (30 mm) in length

Cross-chain:

  • 0.16 in. (4 mm) in diameter
  • 0.55 in. (14 mm) in width
  • 0.98 in. (25 mm) in length
    • Vehicles with 18 and 19-inch tires
    • Tire chains cannot be mounted.
    • Snow tires should be used instead.

Regulations on the use of tire chains

Regulations regarding the use of tire chains vary depending on location and type of road. Always check local regulations before installing chains.

Tire chain installation

  • Observe the following precautions when installing and removing chains:
  • Install and remove tire chains in a safe location.
  • Install tire chains on the front tires. Do not install tire chains on the rear tires.
  • Install tire chains on front tires as tightly as possible. Retighten chains after driving 1/4  1/2 mile (0.5  1.0 km).
  • Install tire chains following the instructions provided with the tire chains.

NOTICE

  • Fitting tire chains
  • The tire pressure warning valves and transmitters may not function correctly when tire chains are fitted.

Read all Instructions for Driving tips User Guide

Toyota BZ4X 2023 Using the air conditioning system and defogger and interior lights User Guide

2023 Toyota BZ4X Air conditioning system, defogger and interior lights

ALL AUTO (“ECO”) control

The seat heaters*, seat ventilators, and heated steering wheel* are each automatically controlled according to the set temperature of the air conditioning system, the outside, and cabin temperature, etc. ALL AUTO (“ECO”) controls the power consumption in order to both extend the cruising range and maintain comfortable conditions.

if equipped

Turning on ALL AUTO (“ECO”) control

Press the ALL AUTO (“ECO”) switch. The indicator on the ALL AUTO (“ECO”) switch illuminates, and the automatic air conditioning system, seat heaters* and ventilators*, and heated steering wheel* operate in automatic mode. If any of the systems are operated manually, the indicator turns off. However, all other functions continue to operate in automatic mode. Even if the ALL AUTO (“ECO”) control is turned off, the air conditioner, seat heater/ventilator, and steering heater will not be turned off. If the front window glass becomes cloudy due to a drop in the outside air temperature while the ALL AUTO (“ECO”) control is operating, you can remove the cloudiness by pressing the AUTO switch on the air conditioner control panel.

If Equipped

Operation of each system

Automatic air conditioning system 

  • The temperature can be adjusted independently for each seat.

Seat heaters (if equipped) and ventilators (if equipped) 

  • Heating or ventilation is automatically selected according to the set temperature of the air conditioning system, the outside temperature, etc.

Heated steering wheel (if equipped) 

  • The heated steering wheel operates automatically according to the set temperature of the air conditioning system, the outside temperature, etc.

Passenger detection functions

  • When a passenger is detected in the front passenger seat, the seat heater and ventilator will operate automatically.

Seat heater (if equipped)/ventilator (if equipped) operation

  • If the seat heater/ventilator switch is set to auto, it will operate without performing the passenger detection.
  • When the ALL AUTO (“ECO”) switch is pressed in that state, the passenger seat heater and ventilator will operate according to that passenger’s detected state.

Rear seat heater (if equipped) operation

  • The rear seat heaters are not controlled by the ALL AUTO (“ECO”) control.

Automatic air conditioning system

Air outlets and fan speeds are automatically adjusted according to the temperature setting.

Air conditioning controls

  • A. ALL AUTO (“ECO”) switch
  • B. Automatic mode switch
  • C. “OFF” switch
  • D. Outside/recirculated air mode switch
  • E. “A/C” switch
  • F. Front seat concentrated airflow mode (S-FLOW) switch
  • G. Windshield wiper de-icer switch (if equipped)
  • H.  “SYNC” switch
  • I. Right-hand side temperature control switch
  • J. Airflow mode control switch
  • K. Fan speed control switch
  • L. Left-hand side temperature control switch
  • M. Rear window and outside rearview mirror defogger switch
  • N. Windshield defogger switch

Adjusting the temperature setting

  • Operate the temperature control switch upwards to increase the temperature and downwards to decrease the temperature.
  • If “A/C” is not pressed, the system will blow ambient temperature air or heated air.

Setting the fan speed

  • Operate the fan speed control switch upwards to increase the fan speed and downwards to decrease the fan speed.
  • Press the “OFF” switch to turn off the fan.

Change the airflow mode

  • Operate the airflow mode control switch upwards or downwards.
  • The mode changes as follows each time the switch is operated.

Toyota BZ4X 2023 Charging FIG (54)

  1. Air flows to the upper body.
  2. Air flows to the upper body and feet.
  3. Air flows to the feet.
  4. Air flows to the feet and the windshield defogger operates.

Read all Instructions for Using the air conditioning system and defogger and interior lights User Guide

Toyota BZ4X 2023 Using the storage features User Guide

2023 Toyota BZ4X Using the storage features Guidelines

List of storage features

Location of the storage featuresToyota BZ4X 2023 Using the storage features User Guide fig (1)

  • (A) Bottle holders
  • (B)Card holders
  • (C)Cup holders
  • (D)Auxiliary box (if equipped)
  • (E)Console box
  • (F)Open tray

WARNING

  • Items that should not be left in the vehicle
    Do not leave glasses, lighters or spray cans in the storage spaces, as this may cause the following when cabin temperature becomes high:
    • Glasses may be deformed by heat or cracked if they come into contact with other stored items.
    • Lighters or spray cans may explode. If they come into contact with other stored items, the lighter may catch fire or the spray can may release gas, causing a fire hazard.

Console boxToyota BZ4X 2023 Using the storage features User Guide fig (2)

  1. Slide the lid as backward.
  2. Lift the lid while pulling the lever to release the lock

Console box lid

The lid can be slide forward/backward.Toyota BZ4X 2023 Using the storage featuresFIG (3)

Tray within console box

The tray can be removed by lifting the tray it outToyota BZ4X 2023 Using the storage featuresFIG (4)

WARNING
Caution while driving Keep the console box closed. Injuries may result in the event of an accident or sudden braking

NOTICE
To prevent damage to the console box Do not apply excessive force to the armrest.

Cup holders

Front

Slide the lid as backwardToyota BZ4X 2023 Using the storage features User Guide fig (5)

Rear

Pull down the armrest.Toyota BZ4X 2023 Using the storage features User Guide fig (6)

WARNING

  • Items unsuitable for the cup holders
    • Do not place anything other than cups or aluminum cans in the cup holders.
    • Other items may be thrown out of the holders in the event of an accident or sudden braking, causing injury. If possible, cover hot drinks to prevent burns.

Bottle holders

FrontToyota BZ4X 2023 Using the storage features User Guide fig (7)

Rear

Toyota BZ4X 2023 Using the storage features User Guide fig (8)

Read all Instructions for Using the storage features User Guide

Toyota BZ4X 2023 Using the other interior features User Guide

2023 Toyota BZ4X Using the other interior features User Guide

Electronic sunshade

Use the overhead switches to operate the electronic sunshade.

Operating the electronic sunshadeToyota BZ4X 2023 Using the other interior features FIG (1)

  1. Open
  2. Close

To stop the electronic sunshade partway, lightly press the either end of the switch.

The electronic sunshade can be operated when The power switch is in ON.

Jam protection function for the electronic sunshade

  • If an object becomes jammed between the electronic sunshade and the sunshade frame while the electronic sunshade is closing, the electronic sunshade movement is stopped and the electronic sunshade is opened slightly.
  • When the jam protection function has operated, even if the “CLOSE” side of the switch is pressed again, the electronic sunshade will not move in the close direction until the reverse operation has stopped completely.
  • The electronic sunshade may operate in reverse if the electronic sunshade is subject to an impact due to the surroundings or the driving conditions.

When the electronic sunshade does not close normally

Perform the following initialization procedure.

  1.  Turn the power switch to ON.
  2.  Press and hold the “CLOSE” side of the switch. It closes until it is near the fully closed position and then stops.

After that, it operates in the opening direction then closes to the fully closed position. If the switch is released at the incorrect time, the procedure will have to be performed again from the beginning. If the automatic opening and closing function does not work normally even after performing the operations above, have the vehicle inspected by your Toyota dealer.

WARNING

Observe the following precautions. Failure to do so may result in death or serious injury

WARNING

Opening and closing the electronic sunshade

  • Check to make sure that all passengers do not have any part of their body in a position where it could be caught when the electronic sunshade is being operated.Toyota BZ4X 2023 Using the other interior features FIG (2)
  • Do not let a child operate the electronic sunshade. Closing the electronic sunshade on someone can cause death or serious injury.
  • Jam protection function
  • Never use any part of your body to intentionally activate the jam protection function.
  • The jam protection function may not work if something gets caught just before the electronic sunshade is fully closed. Also, the jam protection function is not designed to operate while the switch is being pressed. Take care so that your fingers, etc., do not get caught.
  • To prevent burns or injuries
  • Do not touch the area between the underside of the glass roof and the electronic sunshade. Your hand may get caught and you could injure yourself. Also, if the vehicle is left in direct sunlight for a long time, the underside of the panoramic moon roof could become very hot and could cause burns.

Read all Instructions for Using the other interior features User Guide

Toyota BZ4X 2023 Maintenance and care User Guide

2023 Toyota BZ4X Maintenance and care Instructions

Cleaning and protecting the vehicle exterior

Perform the following to protect the vehicle and maintain it in prime condition:

Cleaning instructions

  • Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust.
  • Wash the vehicle body using a sponge or soft cloth, such as a chamois.
  • For hard-to-remove marks, use car wash soap and rinse thoroughly with water.
  • Wipe away any water.
  • Wax the vehicle when the waterproof coating deteriorates. If water does not bead on a clean surface, apply wax when the vehicle body is cool.

Self-restoring coat

The vehicle body has a self-restoring coating that is resistant to small surface scratches caused in a car wash, etc.

  • The coating lasts for 5 to 8 years from when the vehicle is delivered from the plant.
  • The restoration time differs depending on the depth of the scratch and outside temperature.
  • The restoration time may become shorter when the coating is warmed by applying warm water.
  • Deep scratches caused by keys, coins, etc., cannot be restored.
  • Do not use wax that contain abrasives.

Automatic car washes

Before washing the vehicle:

  • Fold the mirrors
  • Turn off the power back door (if equipped) Start washing from the front of the vehicle. Make sure to extend the mirrors before driving.
  • Brushes used in automatic car washes may scratch the vehicle surface, parts (wheel, etc.) and harm your vehicle’s paint.
  • Rear spoiler may not be washable in some automatic car washes. There may also be an increased risk of damage to vehicle.
  • When the shift position needs to be held in N

High pressure car washes

  • As water may enter the cabin, do not bring the nozzle tip near the gaps around the doors or perimeter of the windows, or spray these areas continuously.

Note for a smart key system

  • If the door handle becomes wet while the electronic key is within the effective range, the door may lock and unlock repeatedly. In that case, follow the following correction procedures to wash the vehicle:
  • Place the key in a position 6 ft. (2 m) or more separate from the vehicle while the vehicle is being washed. (Take care to ensure that the key is not stolen.)
  • Set the electronic key to batterysaving mode to disable the smart key system.
  • If the electronic key is inside the vehicle and a door handle becomes wet during a car wash, a buzzer may sound outside the vehicle and “Key Detected In Vehicle” may be shown on the multi-information display.
  • To turn off the alarm, lock all the doors.

Wheels and wheel ornaments

  • Remove any dirt immediately by using a neutral detergent.
  • Wash detergent off with water immediately after use.
  • To protect the paint from damage, make sure to observe the following precautions.
  • Do not use acidic, alkaline or abrasive detergent
  • Do not use hard brushes
  • Do not use detergent on the wheels when they are hot, such as after driving or parking in hot weather

Read all Instructions for Maintenance and care User Guide

Toyota BZ4X 2023 Maintenance User Guide

2023 toyota bz4x maintenance Guidelines

Maintenance requirements

To ensure safe and economical driving, day-to-day care and regular maintenance are essential. It is the owner’s responsibility to perform regular checks. Toyota recommends the following maintenance:

Repair and replacement

It is recommended that genuine Toyota parts be used for repairs to ensure the performance of each system. If non-Toyota parts are used in replacement or if a repair shop other than a Toyota dealer performs repairs, confirm the warranty coverage.

Allow inspection and repairs to be performed by a Toyota dealer

  • Toyota technicians are well-trained specialists and are kept up to date with the latest service information. They are well informed about the operations of all systems on your vehicle.
  • Keep a copy of the repair order. It proves that the maintenance that has been performed is under warranty coverage. If any problem should arise while your vehicle is under warranty, your Toyota dealer will promptly take care of it.

WARNING

If your vehicle is not properly maintained Improper maintenance could result in serious damage to the vehicle and possible death or serious injury.

Handling of the 12-volt battery

  • Oils and fluids contained in vehicles as well as waste produced by component wear contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
  • Avoid exposure and wash any affected area immediately.
  • 12-volt battery posts, terminals and related accessories contain lead and lead compounds which are known to cause brain damage. Wash your hands after handling.

General maintenance

General maintenance should be performed on a daily basis. This can be done by yourself or by a Toyota dealer

Scheduled maintenance

Scheduled maintenance should be performed at specified intervals according to the maintenance schedule. For details about maintenance items and schedules, refer to the “Scheduled Maintenance Guide” or “Owner’s Manual Supplement

Do-it-yourself maintenance

You can perform some maintenance procedures by yourself. Please be aware that do-it-yourself maintenance may affect warranty coverage. The use of Toyota Repair Manuals is recommended. For details about warranty coverage, refer to the separate “Owner’s Warranty Information Booklet” or “Owner’s Manual Supplement”.

2023 toyota BZ4x Specs, Price, Features and Mileage (Brochure)

General maintenance

Listed below are the general maintenance items that should be performed at the intervals specified in the “Owner’s Warranty Information Booklet” or “Owner’s Manual Supplement/Scheduled Maintenance Guide”. It is recommended that any problem you notice should be brought to the attention of your Toyota dealer or qualified service shop for advice.

WARNING

If the EV system is running Turn the EV system off and ensure that there is adequate ventilation before performing maintenance checks.

Motor compartment

Items Check points
 

Brake fluid

Is the brake fluid at the correct level?
 

Power control unit/heater coolant

Is the power con- trol unit/heater coolant at the cor- rect level?
12-volt battery Check the connec- tions.
Items Check points
 

Radiator/con- denser

The radiator and condenser should be free from for- eign objects.
 

Washer fluid

Is there sufficient washer fluid?

Read all Instructions for Maintenance User Guide

Toyota BZ4X 2023 Do-it-yourself maintenance User Guide

2023 Toyota BZ4X Do-it-yourself maintenance Instructions

Do-it-yourself service precautions

If you perform maintenance by yourself, be sure to follow the correct procedure as given in these sections

Items Parts and tools
 

12-volt bat- tery condi- tion

•    Warm water

•    Baking soda

•    Grease

•    Conventional wrench (for termi- nal clamp bolts)

 

 

 

Brake fluid level

•    FMVSS No.116 DOT 3 or SAE J1703 brake fluid FMVSS No.116 DOT 4 or SAE J1704 brake fluid

•    Rag or paper towel

•    Funnel (used only for adding brake fluid)

Items Parts and tools
 

12-volt bat- tery condi- tion

•    Warm water

•    Baking soda

•    Grease

•    Conventional wrench (for termi- nal clamp bolts)

 

 

 

Brake fluid level

•    FMVSS No.116 DOT 3 or SAE J1703 brake fluid FMVSS No.116 DOT 4 or SAE J1704 brake fluid

•    Rag or paper towel

•    Funnel (used only for adding brake fluid)

Items Parts and tools
 

 

 

 

 

 

Heater cool- ant level

•    “Toyota Super Long Life Cool- ant” or a similar high quality eth- ylene glycol-based non-silicate, non- amine, non-nitrite and non-borate coolant with long- life hybrid organic acid technology “Toyota Super Long Life Cool- ant” is pre-mixed with 50% coolant and 50% deion- ized water.

•    Funnel (used only for adding coolant)

Fuses •    Fuse with same amperage rating as original
Headlight aim ·   Phillips-head screwdriver
Radiator and condenser  

¾

Tire inflation pressure •    Tire pressure gauge

•    Compressed air source

 

 

Washer fluid

•    Water or washer fluid containing antifreeze (for win- ter use)

•    Funnel (used only for adding water or washer fluid)

Read all Instructions for Do-it-yourself maintenance User Guide

Toyota BZ4X 2023 Essential information and Steps to take in an emergency User Guide

2023 Toyota BZ4X Essential information and Steps to take in an emergency

Emergency flashers

The emergency flashers are used to warn other drivers when the vehicle has to be stopped in the road due to a breakdown, etc.

Operating instructions

Press the switch.Toyota BZ4X 2023 Essential information fig (1)

All the turn signal lights will flash. To turn them off, press the switch once again.

Emergency flashers

  • If the emergency flashers are used for a long time while the EV system is not operating (while the “READY” indicator is not illuminated), the 12-volt battery may discharge.
  • If any of the SRS airbags deploy (inflate) or in the event of a strong rear impact, the emergency flashers will turn on automatically.
  • The emergency flashers will turn off automatically after operating for approximately 20 minutes.
  • To manually turn the emergency flashers off, press the switch twice.
  • (The emergency flashers may not turn on automatically depending on the force of the impact and conditions of the collision

If your vehicle has to be stopped in an emergency

Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the following procedure:

Stopping the vehicle

  • Steadily step on the brake pedal with both feet and firmly depress it.
  • Shift the shift position to N.
  • After slowing down, stop the vehicle in a safe place by the road.
  •  Stop the EV system.
  • Keep depressing the brake pedal with both feet to reduce vehicle speed as much as possible.
  • To stop the EV system: Press and hold the power switch for 2 consecutive seconds or more, or press it briefly 3 times or more in succession
  • Stop the vehicle in a safe place by the road.

Toyota BZ4X 2023 Essential information fig (2)

WARNING

If the EV system has to be turned off while driving Turning the EV system off while driving will not cause a loss of steering or braking control. However, power assist for the steering wheel may be lost making it difficult to steer smoothly before stopping the vehicle depending on the remaining charge in the 12-volt battery or usage conditions. Decelerate as much as possible before turning off the EV system

If the vehicle is submerged or water on the road is rising

This vehicle is not designed to be able to drive on roads that are deeply flooded with water. Do not drive on roads where the roads may be submerged or the water may be rising. It is dangerous to remain in the vehicle, if it anticipated that the vehicle will be flooded or set a drift. Remain calm and follow the following.

  • If the door can be opened, open the door and exit the vehicle.
  • If the door can not be opened, open the window using the power window switch and ensure an escape route.
  • If the window can be opened, exit the vehicle through the window.
  • If the door and window cannot be opened due to the rising water, remain calm, wait until the water level inside the vehicle rises to the point that the water pressure inside of the vehicle equals the water pressure outside of the vehicle and then open the door after waiting for the rising water to enter the vehicle, and exit the vehicle. When the outside water level exceeds half the height of the door, the door cannot be opened from the inside due to water pressure.

Read all Instructions for Essential information and Steps to take in an emergency User Guide

Toyota BZ4X 2023 Specifications User Guide

2023 Toyota BZ4X Specifications Guidelines

Maintenance data

Dimensions and weights

Overall length 184.6 in. (4690 mm)
Overall width 73.2 in. (1860 mm)
Overall height* 65.0 in. (1650 mm)
Wheelbase 112.2 in. (2850 mm)
 

Tread

Front 63.0 in. (1600 mm)
Rear 63.4 in. (1610 mm)
Vehicle capacity weight (Occupants + luggage) 1045 lb. (475 kg)

Seating capacity

Seating capacity 5 (Front 2, Rear 3)

Vehicle identificationToyota BZ4X 2023 Specifications fig (1)

Vehicle identification number
The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle. This number is on the top left of the instrument panel. This number is also stamped under the right-hand front seat.
Toyota BZ4X 2023 Specifications fig (2)

This number is also on the Certification Regulation LabelToyota BZ4X 2023 Specifications fig (3)

Motor model type and motor number

The motor model type and the motor number are stamped on the motor as shown.

  • Front electric motor (traction motor)
  • Rear electric motor (traction motor) (AWD models)

Front electric motor (traction motor)Toyota BZ4X 2023 Specifications fig (4)

Rear electric motor (traction motor) (AWD models)

Toyota BZ4X 2023 Specifications fig (5)

Front electric motor (traction motor)

 

Model

2WD 1XM
AWD 1YM
Type Permanent magnet synchronous motor
 

Maximum output

2WD 150 kW
AWD 80 kW
 

Maximum torque

2WD 196.4 ft•lbf (266.3 N•m, 27.2 kgf•m)
AWD 124.3 ft•lbf (168.5 N•m, 17.2 kgf•m)

Rear electric motor (traction motor) (AWD models)

Model 1YM
Type Permanent magnet synchronous motor
Maximum output 80 kW
Maximum torque 124.3 ft•lbf (168.5 N•m, 17.2 kgf•m)

Traction battery

Type Lithium-ion battery
Voltage 3.7 V/cell
 

Capacity

201 Ah*1

205 Ah*2

Quantity 96 cells
Nominal voltage 355.2 V

Read all Instructions for Specifications User Guide

Toyota BZ4X 2023 Customization and Initialization User Guide

2023 Toyota BZ4X Customization and Initialization Guidelines

Customizable features

Your vehicle includes a variety of electronic features that can be personalized to suit your preferences. The settings of these features can be changed using the multi-information display, on the audio system screen, or at your Toyota dealer.

Customizing vehicle features

Changing using the multiinformation display

  1.  Press  Toyota BZ4X 2023 Customization FIG (1) of the meter control switches and selectToyota BZ4X 2023 Customization FIG (2)
  2.  Press  Toyota BZ4X 2023 Customization FIG (3) of the meter control switches, select the item.
  3.  To switch the function on and off, press icon to switch to the desired setting.
  4.  To perform detailed setting of the function, press and hold ok  and display the setting screen.

The method of detailed setting differs for each screen. Please refer to the advice sentence displayed on the screen. To go back to the previous screen or exit the customize mode, pressToyota BZ4X 2023 Customization FIG (4).

Changing by using the multimedia system

  1. SelectToyota BZ4X 2023 Customization FIG (2) on the main menu.
  2. Select “Vehicle customize”.
  3. According to the display, select the desired setting.

Various setting can be changed. Refer to the list of settings that can be changed for details.

When customizing using the multimedia system or multiinformation display

Stop the vehicle in a safe place, apply the parking brake, and shift the shift lever to P. Also, to prevent 12-volt battery discharge, leave the EV system operating while customizing the features.

NOTICE

During customization
To prevent 12-volt battery discharge, ensure that the EV system is operating while customizing features

Customizable features

Some function settings are changed simultaneously with other functions being customized. Contact your Toyota dealer for further details.

  • Settings that can be changed on the audio system screen
  • Settings that can be changed by your Toyota dealer
  • Definition of symbols: O = Available, — = Not available

Charging system 

Function Default setting Customized setting      
 

Charging current

 

MAX

8A  

O

 

O

 

16A
 

 

 

Charging limit

 

 

 

Full

90%  

 

 

O

 

 

 

O

 

 

 

80%
70%
60%
50%
 

 

DC charging power

 

 

MAX

125 kW  

 

O

 

 

O

 

 

100 kW
75 kW
50 kW
 

Connector lock

 

Auto Lock

Off  

O

 

O

 

Auto Lock & Unlock
Battery cooler On Off O O

Read all Instructions for Customization and Initialization User Guide

Toyota BZ4X 2023 For owners and what to do if (Troubleshooting) User Guide

2023 Toyota BZ4X what to do if (Troubleshooting)

Reporting safety defects for U.S. owners

If you believe that your vehicle has a defect that could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Toyota Motor Sales, U.S.A., Inc. (Toll-free: 1-800- 331-4331). If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your dealer, or Toyota Motor Sales, U.S.A., Inc. To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888-327-4236 (TTY: 1-800-424-9153); go to http://www.safercar.gov; or write to: Administrator, NHTSA, 1200 New Jersey Ave. SE., Washington, DC 20590. You can also obtain other information about motor vehicle safety from http://www.safercar.gov

Reporting safety defects for Canadian owners

Canadian customers who wish to report a safety-related defect to Transport Canada, Defects Investigations and Recalls, may telephone the toll-free hotline 1-800-333-0510, mail Transport Canada – ASFAD, 330 Sparks Street, Ottawa, ON, K1A 0N5, or complete the online form at https://www.tc.gc.ca/recalls

Seat belt instructions for Canadian owners (in French)

The following is a French explanation of seat belt instructions extracted from the seat belt section in this manual. See the seat belt section for more detailed seat belt instructions in English.

Correct use of seat belts.

  • Unroll the diagonal strap so that it passes snugly over the shoulder, but does not come into contact with the neck or slip off the shoulder.
  • Place the abdominal strap as low as possible on the hips.
  • Adjust the position of the seatback. Sit with your back straight and sit well in the seat.
  • Do not twist the seat belt.Toyota BZ4X 2023 For owners (1)

Maintenance and care

Seat belts

Clean with a cloth or sponge dampened with warm soapy water. Regularly check that the belts are not excessively worn, frayed or cut.

WARNINGSeat belt damage and wear Inspect the seat belt system regularly. Check for cuts, fraying and loose parts. Do not use a damaged seat belt until it has been replaced. A damaged seat belt will not protect an occupant from serious or fatal injury.

SRS airbag instructions for Canadian owners (in French)

The following is a French explanation of SRS airbag instructions extracted from the SRS airbag section in this manual. See the SRS airbag section for more detailed SRS airbag instructions in English.

SRS airbag system

Location of SRS airbagsToyota BZ4X 2023 For owners FIG (1)
Front SRS airbags
  • SRS driver airbag/front passenger airbag Helps protect the head and thorax of the driver and front passenger against impacts against elements in the passenger compartment
  • SRS knee airbags Helps protect the driver and passenger before SRS front side airbags
  • Help protect the chest of front seat occupants SRS rear side airbags
  • Help protect the chest of occupants of the rear outboard seats SRS curtain airbag
  • Mainly help protect the head of seat occupants
  • Can help prevent occupants from being ejected from the vehicle in the event of a rollover
SRS airbag system componentsToyota Toyota BZ4X 2023 For owners FIG (2)BZ4X 2023 For owners FIG (2)

FAQ’s

What is the Toyota BZ4X 2023?

The Toyota BZ4X 2023 is an all-new electric crossover SUV that is part of Toyota’s “Beyond Zero” brand of environmentally friendly vehicles.

What is the driving range of the Toyota BZ4X 2023?

The driving range of the Toyota BZ4X 2023 is expected to be around 250 miles on a single charge.

How long does it take to charge the Toyota BZ4X 2023?

The exact charging time for the Toyota BZ4X 2023 will depend on the charging system used, but it is expected to take around 30 minutes to charge the battery up to 80% using a fast charger.

What kind of technology is included in the Toyota BZ4X 2023?

The Toyota BZ4X 2023 is equipped with a variety of advanced technology, including a large touchscreen display, a digital instrument cluster, and a host of driver assistance features.

Does the Toyota BZ4X 2023 have a solar roof panel?

Yes, the Toyota BZ4X 2023 features a solar roof panel that captures energy from the sun to help power the vehicle’s electrical systems.

Download Manuals: Manuals & Warranties | Toyota Owners | Toyota

2023 toyota BZ4x Specs, Price, Features and Mileage (Brochure)

2023 Toyota Camry User Guide

Leave a Reply

Your email address will not be published. Required fields are marked *