2024 Audi A3 Instrument Cluster | Dashboard Guide
The 2024 Audi A3’s instrument cluster and dashboard are the pinnacle of modern car design. They combine cutting-edge technology with comfortable ergonomics to make driving more enjoyable. The instrument cluster is sleek and easy to use, and it gives you quick access to important car information. The central dashboard, on the other hand, has cutting-edge entertainment and connectivity systems built in. The A3’s dashboard is designed to meet the needs and interests of drivers by providing clear digital displays, easy-to-use controls, and settings that can be changed to suit individual tastes. It makes navigation, entertainment, and vehicle settings all very accessible. The 2024 Audi A3’s instrument cluster and dashboard set a new standard for sophistication and ease of use in the compact luxury sedan market. They also show Audi’s dedication to luxury and new ideas.
2024 Audi A3 Specs, Price, Features, Mileage and Review
Instrument cluster
Instrument cluster overview
- Left dial
- Power meter
- High-voltage battery charge level
- Tab area.
- Central area
- Status line (one or two lines)
- Right dial
- Convenience display
- Display
- Right additional display with speedometer
- Left additional display with:
- Selector lever position
- Audi drive select mode
- Display
- Engine coolant temperature
warning
If there is a serious system malfunction, the display may turn off. The indicator light may also turn on. Stop the vehicle safely. See an authorized Audi dealer or authorized Audi Service Facility for assistance.
Tips
- You can select the units used for temperature, speed, and other measurements in the Infotainment system.
- Speeds are displayed in mph (miles per hour) or km/h (kilometers per hour).
- Certain instrument cluster content can also be displayed in the head-up display”
Operating
Information is organized within various tabs 1 in the instrument cluster. The tab contents are displayed in the central area 2.
Requirement: the ignition must be switched on.
Selecting a tab
- Press the
button 1 repeatedly until the desired tab is selected.
Returning to functions at higher levels
- Press the
button 5.
Opening and closing the menu
- Press the
Button 6.
Selecting and confirming a function
Requirement: a menu or list must be displayed.
- To select a function, turn the left thumbwheel
7 to the desired function. - To confirm a selection, press the left thumb wheel 7
Switching the view
- Press the VIEW button 4.
Overview of the tabs
Depending on vehicle equipment, the following tabs may be available:
Adjusting the display
Switching the view
- Press the VIEW button to switch between the default view 1 and the enhanced view 2.
Adjusting the layout
Depending on the vehicle equipment, various layouts may be available.
Applies to: MMI: Select on the home screen: SETTINGS > Display & brightness Audi virtual cockpit.
- To adjust the desired layout, press 3.
Adjusting the additional display
Depending on the vehicle equipment, the additional displays that can be selected may vary.
- Applies to: MMI: Select on the home screen:
SETTINGS > Display & brightness > Audi virtual cockpit > Configure.
- Select the desired additional display.
Reducing the display
Depending on the vehicle equipment, you can hide the central area in the instrument cluster.
- Selecton the instrument cluster: vehicle functions
tabbutton Reduced display, or - Press the VIEW button on the multifunction
steering wheel.
Coolant temperature display
This applies to vehicles with a coolant temperature indicator
The coolant temperature display. only functions when the ignition is switched on. To reduce the risk of engine damage, please observe the following notes about the temperature ranges.
Cold range
If only the LEDs at the bottom of the gauge had been turned on, the engine would not have reached operating temperature yet. Avoid high engine speeds, full acceleration, and heavy engine loads.
Normal range
The engine has reached its operating temperature once the LEDs up to the center of the gauge turn on. If the
indicator light in the instrument cluster display turns on, the coolant temperature is too high.
Note
- Auxiliary headlights and other accessories in front of the air intake impair the cooling effect of the coolant. This increases the risk of the engine overheating during high outside temperatures and heavy engine load.
- The front spoiler also helps to distribute cooling air correctly while driving. If the spoiler is damaged, the cooling effect will be impaired and the risk of the engine overheating will increase. See an authorized
Audi dealer or authorized Audi Service Facility for assistance.
Tachometer
The tachometer(2 ) displays the engine speed in revolutions per minute (RPM). The beginning of the red zone in the tachometer indicates the maximum permissible engine speed for all gears once the engine has been broken in. Before reaching the red zone, you should shift into
the next higher gear, select the “D” or “S” selector lever position, or remove your foot from the accelerator pedal.
Engine speed limitation
If the
an indicator light turns on, the engine will be automatically limited to the RPM displayed in the instrument cluster. This will protect the engine components, for example during a cold start or from overheating. The engine speed limitation is deactivated if you release the accelerator pedal while the engine is at normal operating temperature. If the engine speed limitation is activated by an engine control malfunction, the indicator light also turns on. Make sure the engine speed does not go above the speed displayed, for example when downshifting. Drive to an authorized. Audi dealer or authorized Audi Service Facility immediately to have the malfunction corrected.
Note
The needle in the tachometer may only be in the red area of the gauge for a short period of time before there is a risk of damaging the engine. The location where the red zone begins varies depending on the engine.
Odometer
The trip odometer and odometer are displayed in the status bar.
The trip odometer shows the distance driven since it was last reset. It can be used to measure short distances. The odometer shows the total distance that the vehicle has been driven.
Resetting the trip odometer
- Select on the instrument cluster: vehicle functions tab > button > Reset mi.
Tips
Distances are displayed in mi (miles) or km (kilometers).
Outside temperature display
The outside temperature is displayed in the status bar. If your vehicle is stationary or if you are driving at very low speeds, the temperature displayed in the instrument cluster may be slightly higher than the actual temperature outside due to heat radiating from the motor. At temperatures below 41 °F (+5 °C), a snowflake symbol appears in front of the temperature display
Warning
Do not assume the roads are free of ice based on the outside temperature display. Be aware that there may be ice on roads even when the outside temperature is around 41 °F (+5 °C) and that ice can increase the risk of accidents.
Engine oil temperature indicator
This applies to: vehicles with engine oil temperature indicator
Depending on the vehicle equipment, the engine oil temperature 9&7 may be indicated by a bar in the instrument cluster.
- Open the vehicle functions tab and switch to the enhanced view
When engine oil temperatures are low, the display °C) appears in the instrument cluster. The engine has reached its operating temperature when the engine oil temperature is between 176 °F (80 °C) and 248 °F (120 °C) under normal driving conditions. The engine oil temperature may be higher if there is heavy engine load and high temperatures outside. This is not a cause for concern as long as the indicator lights do not turn on.
Boost indicator
This applies to: vehicles with boost indicator Depending on vehicle equipment, the current engine load (meaning the current boost pressure) may be indicated by a bar in the instrument cluster.
- Open the vehicle functions tab and switch to the enhanced view.
Shift light indicator
This applies to RS models The shift light indicator indicates when the RPM limit is reached.
- Select the RS Performance or RS Runway layout if necessary.
The shift light indicator is displayed with green, yellow, and red ranges in the upper areas of the tachometer. The shift light indicator will blink red when approaching the engine speed limit. Shift to the next highest gear at the right time.
Sport displays
This applies to RS models Various sport displays, such as a G meter tire pressure indicator, may be available depending on vehicle equipment.
Opening sports displays in the instrument cluster
- Select in the instrument cluster: Vehicle functions
tab > J button > Sport displays. - Turn the left thumbwheel on the multifunction steering wheel until the desired sports display appears in the instrument cluster. Opening sport displays in the MMI
- Applies to MMI: Select the home screen: VE~ HICLE > RS monitor.
- Browse to the desired display necessary.
G meter
The G meter displays the longitudinal and lateral acceleration. The current values are displayed in the instrument cluster while driving. The maximum values that are reached are stored and displayed when the vehicle is stationary. Only the maximum values that are reached are displayed in the MMI.
- To reset the stored values, press and hold the left thumbwheel on the multifunction steering wheel for one second.
Tire pressure
Applies to: vehicles with tire pressure monitoring system
The tire pressure monitoring system displays the current tire pressures and temperatures. Also, see the Tire pressure monitoring system.
Engine Data
The engine data in the instrument cluster shows which percentage of the maximum output or maximum torque is currently being used.
Temperature
The temperature display in the MMI shows the temperature of various fluids, such as the transmission fluid or engine oil.
Vehicle functions
Overview
The trip computer is displayed in the first tab of the driver information system. Additional vehicle functions can be accessed depending on the vehicle equipment.
- Press the button on the multifunction steering wheel.
- Trip computer
- Sport displays
- Lap times
- Lap statistics
- Acceleration measurement
- Reduced display
- Reset trip odometer
On-board computer
Changing the display
- Turn the left thumbwheel on the multifunction steering wheel Fig. 4 until the desired display is shown.
Resetting values to zero
Requirement: the Consumption, Short-term memory or Long-term memory display must be selected.
- To reset the values in one of the memories to zero, press and hold the left thumbwheel on the multifunction steering wheel for one second, or
- Select on the instrument cluster: vehicle functions tab > button Reset mi.
Displays in the trip computer
The following displays may be shown, depending on the vehicle equipment:
- Time and date
- Range display
- Average consumption
- Short-term memory overview
- Long-term memory overview
Driver assistance - Traffic sign recognition and traffic light information
Short-term memory and long-term memory
The short-term memory collects driving information from the time the ignition is switched on until it is switched off. If you continue driving within two hours after switching the ignition off, the new values will be included when calculating the current trip information. Unlike the short-term memory, the long-term memory is not erased automatically. You can select the time period for evaluating trip information yourself.
Average consumption
The current consumption can be shown using a bar graph. The average consumption stored in the short-term memory is also displayed. If the bar is green, your vehicle is saving energy (for example, using recuperation).
Energy consumers
The Energy consumer’s view lists other equipment that is currently affecting fuel consumption. The display shows up to three equipment items. The equipment using the most power is listed first. If more than three items using power are switched on, the equipment that is currently using the most power is displayed. A gauge also shows the current total consumption of all other equipment.
Tips
The date, time of day, and time and date format can be set.
FAQs
The instrument cluster is positioned behind the steering wheel, within the driver’s line of sight.
The instrument cluster showcases essential data such as vehicle speed, RPM, fuel level, temperature, and various alerts.
Yes, you can often personalize the display settings to prioritize specific information or modify the appearance of the instrument cluster.
You can typically navigate through the menus and settings using buttons or controls located on the steering wheel.
The 2024 Audi A3 may offer a digital display, providing clear and customizable information to the driver.
Yes, depending on the trim level and options, advanced features such as navigation prompts, driver assistance alerts, and media playback information may be displayed.
You can typically adjust the brightness of the instrument cluster through the vehicle settings menu or dedicated controls.
Some models may offer a night mode feature that adjusts the brightness and color scheme of the instrument cluster for improved visibility during nighttime driving.
Yes, vehicle performance metrics such as fuel economy, trip information, and driving modes may be displayed.
Safety features such as collision warnings, lane departure alerts, and blind-spot monitoring may be displayed to keep the driver informed.
Yes, various vehicle settings and customization options can often be accessed directly through the instrument cluster menu.
The instrument cluster provides crucial information in a clear and accessible manner, enhancing convenience, safety, and overall driving satisfaction.
Depending on the model and options, smartphone integration features such as Apple CarPlay and Android Auto may be accessible.
Yes, notifications for calls, messages, and other smartphone alerts may be displayed when connected via Bluetooth or USB.
The sleek design and advanced technology of the instrument cluster add to the overall modern and luxurious ambiance of the interior, reflecting Audi’s commitment to sophistication and innovation.
Useful Links
View Full PDF: 2024 Audi A3 Owner’s Manual| Auto User Guide
