2024 BMW 2 Series Instrument Cluster Displays Guide
The 2024 BMW 2 Series has an upgraded instrument cluster for better driving. Its features, customization choices, and seamless integration with car technology for optimal performance are covered in this guide.
2024 BMW X5 Review, Price, Features And Mileage (Brochure)
Video: 2024 BMW 2 Series Dashboard Warning Indicators
BMW Displays Guide
Vehicle equipment
This chapter describes all standard, country-specific and optional equipment available for the model range. It may therefore describe equipment and functions which are not avail-able in a vehicle, for example on account of the optional equipment selected or the national-market version. This also applies to safety-rel-evant functions and systems. Please comply with the relevant laws and regulations when using the corresponding functions and sys-tems.
Instrument cluster
General
Depending on the equipment, the switching of displays in the instrument cluster can be deac-tivated via iDrive.
The displays in the instrument cluster can sometimes differ from the illustrations in the Owner’s Handbook.
Safety information
WARNING
If the displays in the instrument cluster fail, the vehicle must not be used. There is a risk of accident or material damage. Immediately park the vehicle safely. By switching drive-ready state off and on again, it may be pos-sible to rectify the malfunction and continue driving. If the malfunction cannot be rectified, have the system checked by an authorised Service Partner or another qualified Service Partner or a specialist workshop.
Full Black Panel Display:Overview
- Fuel level indicator
Range - Speedometer
- Central display area
Navigation display - Depending on the equipment: Driver Atten-tion Camera
- Revolution counter
Selection lists
Widgets
Trip odometer, see Trip data
Shift Lights
ECO PRO displays
Power display
Status of Driving Experience Control Gear indicator - Engine temperature
- Outside temperature
- Check Control
- Speed Limit Assist
Speed Limit Info
Time
Central display area
Depending on the equipment and setting, the following is displayed in the central display area of the instrument cluster:
- Navigation displays such as the map view or, if route guidance is active, a route pre-view with route guidance instructions.
- Service notification displays.
Some displays in the central display area can be configured individually.
The displays may vary depending on the equipment and national-market version.
Drive mode view
Principle
Depending on the equipment and if the drive mode view is activated, the displays in the in-strument cluster are adapted to the drive mode in question when Driving Experience Control is used to change programmes.
Activating/deactivating
- “CAR”
- “Settings”
- “Displays”
- “Driving mode view”
Settings
Individual displays can be configured sepa-rately.
- “CAR”
- “Settings”
- “Displays”
- “Instrument cluster”
- Select the desired setting.
Full Black Panel Display: widgets
Principle
Displays for particular functions can be shown in the instrument cluster.
The following displays can be selected:
- Current entertainment source, for example radio.
- Torque and power.
- G-Meter.
- Trip data.
- Efficiency display.
Selecting
Press the button on the turn indicator lever re-peatedly until the desired widget is selected.
Display
G-Meter
The G-Meter shows the longitudinal and lat-eral forces acting on the vehicle occupants during a journey.
Efficiency display
Principle
Information on the driving style and consump-tion can be shown as a widget in the instru-ment cluster, taking the form of a consumption display, for example.
General
The information shown varies depending on the activated drive mode:
|
Drive mode |
Display |
|
COMFORT SPORT |
Average consumption. Current consumption. Energy recuperation. |
|
ECO PRO |
ECO PRO bonus range. |
Average consumption
Average consumption indicates the fuel con-sumption over a specific distance.
Current consumption
The display of the current consumption allows you to check the current fuel consumption, e.g. for driving economically and in an environmen-tally friendly manner.
Energy recuperation
Energy recuperation involves converting the ki-netic energy of the vehicle into electrical en-ergy in coasting overrun mode. The vehicle battery is partially charged and fuel consump-tion can be lowered.
ECO PRO bonus range
In ECO PRO drive mode, the ECO PRO bonus range shows how the range is increased by adopting a fuel-efficient driving style.
Check Control
Principle
Check Control monitors vehicle functions and alerts you to any faults in the monitored sys-tems.
General
A Check Control message is displayed as a combination of indicator or warning lights and text messages in the instrument cluster and, if applicable, in the Head-up display.
An acoustic signal may also be output and a text message shown on the control display.
2024 BMW X5 Review, Price, Features And Mileage (Brochure)
Hiding Check Control messages
Press the button on the turn indicator lever.
Continuous display
Some Check Control messages are displayed permanently and remain until the fault has been repaired. If a number of malfunctions have occurred at the same time, the messages are displayed in succession.
The messages can be hidden for approxi-mately 8 seconds. Afterwards they are dis-played again automatically.
Temporary display
Some Check Control messages are automati-cally hidden after approximately 20 seconds. The Check Control messages remain stored and can be displayed again.
Displaying saved Check Control messages
- “CAR”
- “Vehicle status”
- “Check Control messages”
- Select the required text message.
Useful Links
View Full PDF: 2024 BMW 2 Series Owner’s Manual | Auto User Guide
2024 BMW X5 Review, Price, Features And Mileage (Brochure)
2024 BMW 2 Series Fuses And Fuse Box | Replacing A Blown Fuse