What is P1362 : Engine Error code Causes Explained
This blog covers the P1362 engine trouble code, its causes, and its effects on vehicle performance. This mistake must be understood for prompt diagnosis and correction.
How to Identify a DTCs Number
The P1362 engine error code is associated with the ignition system, specifically with the camshaft position sensor circuit.
Understand, this trouble codes (DTCs) are 5 characters: 1 letter, 4 numbers. P-Powertrain indicates the fault code’s location. Generic or manufacturer-specific codes are indicated by the first digit. The second digit denotes the subsystem (7=transmission). The last two numbers describe the issue.
To identify a DTC’s number, you can use an OBD-II scanner. By connecting the scanner to the vehicle’s OBD-II port, you can retrieve the diagnostic trouble codes stored in the vehicle’s PCM. This will display the error code, such as P1362, allowing you to identify the specific problem.
Causes of P1362 Error Code:
- Faulty Top Dead Center (TDC) Sensor.
Most common cause: sensor damaged, dirty, or worn out. - Damaged Sensor Wiring:
Broken/corroded wires to TDC sensor disrupt signal. - Loose Sensor Connection:
Loose sensor connection causes intermittent signal loss. - Faulty Engine Control Module (ECM):
Rarely, ECU malfunction misinterprets sensor signal. - Crankshaft Position Sensor Issues:
Crankshaft sensor issues may contribute to P1362 as both aid engine timing.
Risk Level of P1362 Error Code:
The P1362 engine error code indicates a High risk Level. When this error code appears at a high-risk level, it suggests that there is a significant malfunction that can lead to engine misfires, poor performance, or even engine damage if left unaddressed.
Common Car Brands Affected by P1362 Code:
The P1362 engine error code is commonly found in the following list.
- Buick
- Honda
- Acura
Video: P1362 Engine Error code
FAQ’s
What is the P1362 Engine Error Code?
The P1362 error code indicates a problem with the crankshaft position sensor circuit. It specifically points to an issue with the signal sent by the sensor, which can disrupt the engine’s timing and performance.
What Causes the P1362 Engine Error Code?
Common causes of the P1362 code include a faulty crankshaft position sensor, damaged or corroded wiring, or poor sensor connection. In some cases, a malfunctioning engine control module (ECM) may also trigger this error.
What is the Risk Level of the P1362 Error Code?
The risk level for the P1362 error code is high. If ignored, it can lead to engine misfires, stalling, poor fuel economy, and possible damage to the engine over time due to improper timing.
Which Vehicles are Affected by the P1362 Error Code?
The P1362 error code can affect vehicles equipped with a crankshaft position sensor. This includes Buick, Honda and Acura models.