Table of Contents

2023 Hyundai Venue Cluster Display User Guide

This Guide covers the 2023 Hyundai Venue Cluster Display’s features, settings, and functions to help you monitor vehicle data and configure display options for a better driving experience.

2023 – 2024 Hyundai VENUE Review, Price, Mileage, Features And Torque

Video: 2023 Hyundai Venue Dashboard Warning Indicators

Cluster Display Messages

Shift to P or N to Start Engine (for Smart Key System and Intelligent Variable Transmission (IVT))
This warning message is displayed if you try to start the engine with the shift lever, not in the P (Park) or N (Neutral) position.

Information
You can start the engine with the shift lever in the N (Neutral) position. But, for your safety, start the engine with the shift lever in the P (Park) position.

Shift to P (for Smart Key System)
This message is displayed if you try to turn off the engine without the shift lever in the P (Park) position. If this occurs, the Engine Start/Stop button turns to the ACC position (If you press the Engine Start/Stop button once more, it will turn to the ON position).

Low Key Battery (for Smart Key System)
This warning message is displayed if the battery of the smart key is discharged while changing the Engine Start/Stop button to the OFF position.

Press the Brake Pedal to Start the Engine (for the Smart Key System)
This warning message is displayed if the Engine Start/Stop button changes to the ACC position twice by pressing the button repeatedly without depressing the brake pedal. You can start the vehicle by depressing the brake pedal and then pressing the Engine Start/Stop button.

Key Not in Vehicle (for Smart Key System)
This warning message is displayed if the smart key is not in the vehicle when you press the Engine Start/Stop button. When attempting to start the vehicle, always have the smart key with you.

Key Not Detected (for Smart Key System)
This warning message is displayed if the smart key is not detected when you press the Engine Start/Stop button.

Press the START Button Again (for the Smart Key System)
This message is displayed if you were unable to start the vehicle when the Engine Start/Stop button was pressed. If this occurs, attempt to start the engine by pressing the Engine Start/Stop button again. If the warning message appears each time you press the Engine Start/Stop button, have your vehicle inspected by an authorized HYUNDAI dealer.

Battery Discharging Due to External Electrical Devices (if equipped)
This message is displayed if the battery voltage is weak due to any non-factory electrical accessories (for example, dashboard camera) while parking. Be careful that the battery is not discharged. If the warning message appears after removing the non-factory electrical accessories, have the vehicle inspected by an authorized HYUNDAI dealer.

Press the Clutch Pedal to Start the Engine (for Smart Key System and Manual Transmission)
This warning message is displayed if the Engine Start/Stop button is in the ACC position twice by pressing the button repeatedly without depressing the clutch pedal. Depress the clutch pedal to start the engine.

Press the START Button with the Key (for the Smart Key System)
This warning message is displayed if you press the Engine Start/Stop button while the warning message “Key not detected” is displayed.
At this time, the immobilizer indicator light blinks.

Check BRAKE SWITCH Fuse (for Smart Key System)
This warning message is displayed if the brake switch fuse is disconnected. You need to replace the fuse with a new one before starting the engine. If that is not possible, you can start the engine by pressing the Engine Start/Stop button for 10 seconds in the ACC position.

Door, Hood, Liftgate Open IndicatorThis warning is displayed if any door the hood or the liftgate is left open. The warning will indicate which door is open in the display.

CAUTION
Before driving the vehicle, you should confirm that the door/hood/liftgate is fully closed. Also, check there is no door/hood/liftgate open warning light or message displayed on the instrument cluster.

Sunroof Open (if equipped)This warning is displayed if you turn off the engine when the sunroof is open. Close the sunroof securely before leaving your vehicle.

Icy Road Warning Light (if equipped)This warning light is to warn the driver that the road may be icy.
When the temperature on the outside temperature gauge is approximately below 40°F (4°C), the Icy Road Warning Light and Outside Temperature Gauge blink 10 times and then illuminate. Also, the warning chime sounds 3 times.

Information
If the icy road warning light appears while driving, you should drive more attentively and safely and refrain from speeding, rapid acceleration, sudden braking sharp turning, etc.

Low PressureThis warning message is displayed if the tire pressure is low. The corresponding tire on the vehicle will be illuminated. For more information, refer to “Tire Pressure Monitoring System (TPMS)” in chapter 7.

Lights ModeThis indicator displays which exterior light is selected using the lighting control.

WiperThis indicator displays which wiper speed is selected using the wiper control.

Low Fuel
This warning message is displayed if the fuel tank is almost out of fuel.
When this message is displayed, the low fuel level warning light in the cluster will come on. It is recommended to look for the nearest fueling station and refuel as soon as possible. Add fuel as soon as possible.

Engine Overheated
This warning message is displayed when the engine coolant temperature is above 248°F (120°C). This means that the engine is overheated and may be damaged. If your vehicle has overheated, refer to “If the Engine Overheats” in Chapter 7.

Check the Headlight (if equipped)
This warning message is displayed if the headlights are not operating properly. A headlight bulb may need to be replaced.

Information
Make sure to replace the burned-out bulb with a new one with the same wattage rating.

CLUSTER DISPLAY

Cluster Display Control
The cluster display modes can be changed by using the control buttons.

Switch	Function
	MODE button for changing modes
	MOVE switch for changing items
OK	SELECT/RESET button for setting or resetting the selected item

Cluster Display Modes

Modes	Symbol	Explanation
Trip Computer		This mode displays driving information such as the trip meter, fuel economy, etc. For more information, refer to “Trip Computer” in this chapter.
Drive Assist (if equipped)		This mode displays the state of: Lane Keeping Assist Driver Attention Warning Tire pressure For more information, refer to “Lane Keeping Assist (LKA)”, “Driver Attention Warning (DAW)” in Chapter 6, and “Tire Pressure Monitoring System (TPMS)” in Chapter 7.
User Settings		The User Settings menu provides user options for a variety of settings including door lock/unlock features, convenience features, driver assistance settings, etc.
Master Warning		The Warning mode displays warning messages related to the vehicle when one or more systems are not operating normally.

The information provided may differ depending on which functions apply to your vehicle.

Quick Guide Help
This mode provides quick guides for the systems in the User Settings mode. Select an item, press and hold the OK button. For more information about each system, refer to this Owner’s Manual.

Trip Computer Mode
The trip computer mode displays information related to vehicle driving parameters including fuel economy, trip meter information, and vehicle speed.
For more information, refer to “Trip Computer” in this chapter.

Drive Assist Mode
LKA
This mode displays the state of Lane Keeping Assist.
For more details, refer to each system information in chapter 7.
Tire Pressure
This mode displays information related to Tire Pressure.
For more information, refer to “Tire Pressure Monitoring System (TPMS)” in chapter 7.

Master Warning Mode
This warning light informs the driver of the following situations.

Forward Collision-Avoidance Assist malfunction (if equipped)
Forward Collision-Avoidance Assist radar blocked (if equipped)
Blind-Spot Collision Warning malfunction (if equipped)
Blind-Spot Collision Warning radar blocked (if equipped)
Lamp malfunction (if equipped)
High Beam Assist malfunction (if equipped)
Tire Pressure Monitoring System (TPMS) malfunction (if equipped)

The Master Warning Light illuminates if one or more of the above warning situations occur. At this time, a Master Warning icon ( ) will appear beside the User Settings icon ( ), on the cluster display.
If the warning situation is solved, the master warning light will be turned off and the Master Warning icon will disappear.

User Settings Mode
In this mode, you can change the settings of the instrument cluster, doors, lamps, etc.

Driver Assistance
Cluster
Lights
Door
Convenience
Units
Language
Reset

The information provided may differ depending on which functions apply to your vehicle.

Driver Assistance

Items	Explanation
Warning Volume	To adjust the warning volume of the driver assistance system Driving Safety Priority/ Parking Safety Priority / High / Medium / Low
Driver Attention Warning	To activate or deactivate the Leading vehicle departure alert. Leading vehicle departure alert Inattentive Driving Warning For more details, refer to “Driver Attention Warning (DAW)” in chapter 7.
Driving Safety	Forward Safety To activate or deactivate the Forward Safety. Forward Safety Warning Timing To adjust the Forward Safety warning timing of the driver assistance system. For more details, refer to “Forward Collision-Avoidance Assist (FCA)” in Chapter 7 Lane Safety To activate or deactivate the Lane Safety. For more details, refer to “Lane Keeping Assist (LKA)” in chapter 7 Blind-Spot Safety To activate or deactivate the Blind-Spot Safety. For more details, refer to “Blind-Spot Collision Warning (BCW)” in chapter 7
Parking Safety	Rear Cross-Traffic Safety To activate or deactivate Rear Cross-Traffic Safety. For more details, refer to “Rear Cross-Traffic Collision-Avoidance Assist (RCCA)” in chapter 7.

The information provided may differ depending on which functions apply to your vehicle.

Cluster

Items	Explanation
Theme Selection	You can select the theme of the cluster. Theme A / Theme B / Theme C
Wiper/Lights Display	To activate or deactivate the Wiper/ Light mode. When activated, the cluster display shows the selected Wiper/Light mode whenever you change the mode.
Traffic Signs	To set the traffic signs displayed.
Icy Road Warning	To activate or deactivate the icy road warning.
Cluster Voice Guidance Volume	To adjust the cluster voice guidance volume.
Welcome Sound	To activate or deactivate the welcome sound.

The information provided may differ depending on which functions apply to your vehicle.

Lights

Items	Explanation
Illumination	Adjust the illumination level. Level 1~20
One Touch Turn Signal	Off: The one-touch turn signal function will be deactivated. 3, 5, 7 Flashes: The turn signal indicator will blink 3, 5, or 7 times when the turn signal lever is moved slightly. For more details, refer to “Lighting” in chapter 5.
Headlight Delay	To activate or deactivate the Headlight delay function. For more details, refer to “Lighting” in chapter 5.
High Beam Assist	To activate or deactivate High Beam Assist. For more details, refer to “High Beam Assist (HBA)” in chapter 5.

The information provided may differ depending on which functions apply to your vehicle.

Door

Items	Explanation
Automatically Lock	Enable on Shift: All doors will be automatically locked if the shift button is shifted from the P (Park) position to the R (Reverse), N (Neutral), or D (Drive) position. (only when the engine is running.) Enable on Speed: All doors will be automatically locked when the vehicle speed exceeds 9 mph (15 km/h). Off: The auto door lock operation will be deactivated.
Automatically Unlock	On Shift to P: All doors will be automatically unlocked if the shift button is shifted to the P (Park) position. (only when the engine is running.) On key out/On vehicle off: All doors will be automatically unlocked when the ignition key is removed from the ignition switch or the Engine Start/Stop button is set to the OFF position. Off: The auto door unlock operation will be canceled.
Two Press Unlock	Off: The two-press unlock function will be deactivated. Therefore, all doors will unlock if the door unlock button is pressed. On: Only the driver’s door will unlock if the door unlock button is pressed. When the door unlock button is pressed again within 4 seconds, the remaining doors will unlock.
Horn Feedback	To activate or deactivate the horn feedback. If the horn feedback is activated, after locking the door by pressing the lock button on the remote key and pressing it again within 4 seconds, the horn feedback sound will operate once to indicate that all doors are locked (if equipped with a remote key).
Remote Window	To activate or deactivate the Remote Window Control

The information provided may differ depending on which functions apply to your vehicle.

Convenience

Items	Explanation
Rear Occupant Alert	To activate or deactivate the Rear Occupant Alert. For more details, refer to the “Rear Occupant Alert (ROA) system” in Chapter 5.
Service Interval	Service Interval To activate or deactivate the service interval function. Adjust Interval If the service interval menu is activated, you may adjust the time and distance. Reset To reset the service interval.
Welcome Mirror/Light	On door unlock: The side view mirrors are unfolded and the welcome light turns on automatically when the doors are unlocked. On driver approach: The side view mirrors are unfolded and the welcome light turns on automatically when the vehicle is approached with the smart key. For more details, refer to ”Welcome System” in chapter 5.”
Wireless Charging System	To activate or deactivate the wireless charging system in the front seat. For more details, refer to “Wireless cellular phone charging system” in Chapter 5.
Auto Rear Wiper (in R)	To activate or deactivate the Auto Rear Wiper function. If you move the shift button from D to R when the front wiper operates, the rear wiper will operate automatically. Then, if you move the shift button from R to D, the rear wiper will stop.”

The information provided may differ depending on which functions apply to your vehicle.

Units

Items	Explanation
Speed Unit	To select the speed unit. (km/h, MPH)
Temperature Unit	Select the temperature unit. (°C,°F)
Fuel Economy Unit	To select the fuel economy unit. (km/L, L/100km, MPG)
Tire Pressure Unit	Select the tire pressure unit. (psi, kPa, bar)

The information provided may differ depending on which functions apply to your vehicle.

Language

Items	Explanation
Language	Choose the language. You can choose the language in the infotainment system. (if equipped)

The information provided may differ depending on which functions are applicable
to your vehicle.

Reset

Items	Explanation
Reset	You can reset the menus in the User Settings Mode. All menus in the User Settings Mode are reset to factory settings, except language and service interval.

The information provided may differ depending on which functions apply to your vehicle.

2023 – 2024 Hyundai VENUE Review, Price, Mileage, Features And Torque

TRIP COMPUTER

The trip computer is a microcomputer-controlled driver information system that displays information related to driving.

Information
Some driving information stored in the trip computer (for example Average Vehicle Speed) resets if the battery is disconnected.

Trip Modes
To change the trip mode, toggle the “, ” switch on the steering wheel.

Manual reset
To clear the average fuel economy manually, press the OK button on the steering wheel for more than 1 second when the average fuel economy is displayed.
Automatic reset
To automatically reset the average fuel economy after refueling, select the “Fuel Econ. Reset” mode in the User Settings menu on the cluster display.
- After Ignition: When the engine has been OFF for 3 minutes or longer the average fuel economy will reset automatically.
- After Refueling: The average fuel economy will reset automatically after adding 1.6 gallons (6 liters) of fuel or more and after driving speed exceeds 1 mph (1 km/h).

Drive Info
Trip distance (1), total driving time (2), and average fuel economy (3) are displayed. The information is combined for each ignition cycle. However, when the engine has been OFF for 3 minutes or longer the Drive Info screen will reset. To reset manually, press the OK switch on the steering wheel for more than 1 second when ‘Drive Info’ is displayed.
Since Refueling
Trip distance (1), total driving time (2), and average fuel economy (3) after the vehicle has been refueled are displayed. To reset manually, press the OK switch on the steering wheel for more than 1 second when ‘Since Refueling’ is displayed.
Accumulated Info
Accumulated trip distance (1), total driving time (2), and average fuel economy (3) are displayed. The information is accumulated starting from the last reset. To reset manually, press the OK switch on the steering wheel for more than 1 second when ‘Accumulated Info’ is displayed.
Auto Stop (if equipped)
AUTO STOP display shows the elapsed time of engine stop by the Idle Stop and Go system. For more details, refer to the “Idle Stop and Go (ISG)” section in chapter 6.