Display Setting: 2023 Hyundai Santa-Cruz Screen Messages Guide
The display settings in the 2023 Hyundai Santa Cruz have a full and easy-to-use interface that lets drivers make the driving experience fit their wants and preferences. Drivers can access a wide range of features and choices designed to make the car more convenient, safe, and fun from the bright touchscreen interface. The display settings make it easy to find your way around and give you clear directions, whether you’re changing the audio settings, the navigation settings, or the driver assistance systems. The screen messages guide also makes sure that users are quickly informed of any system updates, alerts, or notifications. This keeps the vehicle running smoothly and keeps users aware of its state. The display options in the 2023 Hyundai Santa Cruz make driving more enjoyable by integrating seamlessly and giving clear instructions. They also provide peace of mind on all trips.
2024 Hyundai SANTA CRUZ Specs, Price, Features, Mileage And Review
Cluster Display Messages for Vehicles Equipped with Smart Key
Shift to P
This message is displayed if you try to turn off the vehicle without the gear in the P (Park) position. If this occurs, the Engine Start/Stop button turns to the ACC position.
Low key battery
When the Engine Start/Stop button is pressed to turn OFF the engine,
this message may be displayed. This message indicates that the internal battery of the Smart Key is low. Consider replacing the Smart Key internal battery.
Press the START button while turning the wheel
This message is displayed if the steering wheel does not unlock normally when the Engine Start/Stop button is pressed. You should press the Engine Start/Stop button while turning the steering wheel right and left.
Check the steering wheel lock system
This message is displayed if the steering wheel does not lock normally while the Engine Start/Stop button is pressed to the OFF position.
Press the brake pedal to start the engine
This message is displayed if the Engine Start/Stop button changes to the ACC position twice by pressing the button repeatedly without depressing the brake pedal. You can start the vehicle by depressing the brake pedal and then pressing the Engine Start/Stop button.
Key not in the vehicle
This message is displayed if the smart key is not in the vehicle when you leave the vehicle with the Engine Start/Stop button in the ON or Start position. Always turn off the engine before leaving your vehicle.
Key not detected
This message is displayed if the smart key is not detected when you press the Engine Start/Stop button.
Press the START button again
This message is displayed if you were unable to start the vehicle when the Engine Start/Stop button was pressed. If this occurs, attempt to start the engine by pressing the Engine Start/ Stop button again.
If the warning message appears each time you press the Engine Start/Stop button, have the vehicle inspected by an authorized HYUNDAI dealer.
Press the START button with the key
This message is displayed if you press the Engine Start/Stop button while the warning message “Key not detected” is displayed. At this time, the immobilizer indicator light blinks.
Check BRAKE SWITCH fuse
This message is displayed if the brake switch fuse is disconnected.
You need to replace the fuse with a new one before starting the engine.
If that is not possible, you can start the engine by pressing the Engine Start/Stop button for 10 seconds in the ACC position.
Shift to P or N to start engine
This message is displayed if you try to start the engine in any other position except P (Park) or N (Neutral).
Information
You can start the engine with the gear in N (Neutral). But, for your safety, start the engine with the gear shift to P (Park).
Battery discharging due to external electrical devices
This message is displayed if the vehicle battery voltage is low or if a current draw is detected that could drain the vehicle battery.
Check to see that there are no non-factory external electronic devices connected to the vehicle battery system, otherwise, battery discharge may occur. If this message appears in the LCD cluster and there are no other non-factory electronic devices connected to the vehicle, have the vehicle inspected by an authorized HYUNDAI dealer.
Door, Hood, Tailgate open indicator
This warning is displayed if any door hood or tailgate is left open. The warning will indicate which door is open in the display.
CAUTION
Before driving the vehicle, you should confirm that the door/ hood/tailgate is fully closed. Also, check there is no door/hood/tailgate open warning light or message displayed on the instrument cluster.
Sunroof open indicator (if equipped)
This warning is displayed if you turn off the engine when the sunroof is open. Close the sunroof securely before leaving your vehicle.
Low tire pressure
This warning message is displayed if the tire pressure is low. The corresponding tire on the vehicle will be illuminated.
Lights
This indicator displays which exterior light is selected using the lighting control. You can activate or deactivate the Wiper/Lights display function from the User Settings menu in the cluster display.
Select:
- Setup – User settings – Cluster – Wiper/Lights display
Wiper
This indicator displays which wiper speed is selected using the wiper control. You can activate or deactivate the Wiper/Lights display function from the User Settings menu in the cluster display.
Select:
- Setup – User settings – Cluster – Wiper/Lights display
Low washer fluid (if equipped)
This message is displayed if the washer fluid level in the reservoir is nearly empty. Have the washer fluid reservoir refilled.
Low fuel
This message is displayed if the fuel tank is almost out of fuel. When this message is displayed, the low fuel level warning light in the cluster will come on. It is recommended to look for the nearest fueling station and refuel as soon as possible.
Low engine oil
This warning message is displayed when the engine oil level should be checked. If this warning message is displayed, check the engine oil level as soon as possible and add engine oil as required. Slowly pour the recommended oil little by little into a funnel. Use only the specified engine oil. (Refer to the “Recommended Lubricants and Capacities“ section in chapter 2.) Do not overfill the engine oil. Make sure the oil level is not above the F (Full) mark on the dipstick.
WARNING
When the engine oil level warning message appears, it is necessary to check if you have replaced the Engine oil according to the maintenance schedule in Chapter 9. If it has not been checked and followed, the engine oil must be replaced first.
Information
After adding engine oil, if you travel approximately 18~37 miles (30~60 km) after the engine warms up, the warning message should disappear. If the warning message remains on, have the vehicle inspected by an authorized HYUNDAI dealer as soon as possible.
Engine overheated
This message is displayed when the engine coolant temperature is above 248°F (120°C). This means that the engine is overheated and may be damaged. If your vehicle is overheated, refer to the “Overheating” section in Chapter 8.
Check headlight
This warning message is displayed if the headlights are not operating properly. In addition, if a specific lamp(turn signal lamp etc.) is not operating properly, the warning message according to a specific lamp (turn signal lamp, etc.) is displayed. A corresponding bulb may need to be replaced. Make sure to replace the burned-out bulb with a new one with the same wattage rating.
Check turn signal
This message is displayed if the turn signal lamps are not operating properly. A lamp may need to be replaced. Make sure to replace the burned-out bulb with a new one with the same wattage rating.
Check headlight LED
This message is displayed if there is a problem with the LED headlight. Have the vehicle inspected by an authorized HYUNDAI dealer.
CLUSTER DISPLAY
Cluster Display Control
The cluster display modes can be changed by using the control buttons.
Switch | Function |
![]() |
MODE button for changing modes |
![]() |
MOVE switch for changing items |
OK | SELECT/RESET button for setting or resetting the selected item |
Information
When the infotainment system is applied, only the User’s Setting mode on the infotainment system is supported but the User’s Setting mode on the instrument cluster is not supported.
View Modes
View modes | Symbol | Explanation |
Driving Assist | –
|
This mode displays the state of :
Smart Cruise Control (if equipped) Highway Driving Assist (if equipped)
For more information, refer to “Lane Keeping Assist (LKA)”, “Driver Attention Warning (DAW)”, “Smart Cruise Control (SCC)”, “Highway Driving Assist (HDA)” in Chapter 7 and “All Wheel Drive (AWD)” in chapter 6. |
Trip Computer |
|
This mode displays driving information such as the trip meter, fuel economy, etc.
For more details, refer to “Trip Computer” in this chapter. |
Turn By Turn (TBT) |
– |
This mode displays the state of the navigation. |
User Settings |
–
|
In this mode, you can change the settings of the doors, lamps, etc. |
Warning | – | The Warning mode displays warning messages related to the vehicle when one or more systems are not operating normally. |
The information provided may differ depending on which functions apply to your vehicle.
Trip computer mode
The trip computer mode displays information related to vehicle driving parameters including fuel economy, trip meter information, and vehicle speed.
For more information, refer to “Trip Computer” in this chapter.
Turn By Turn (TBT) mode
Turn-by-turn navigation and distance/time to destination information are displayed when the Turn-by-turn view is selected.
Driving Assist mode
LKA/SCC/LFA/HDA
This mode displays the state of Lane Keeping Assist, Smart Cruise Control, Lane Following Assist, and Highway Driving Assist.
For more details, refer to each system information in chapter 7.
Driver Attention Warning
This mode displays the state of the Driver Attention Warning.
For more details, refer to “Driver Attention Warning (DAW)” in chapter 7.
Driving force distribution (AWD)
This mode displays information related to AWD’s driving force.
If the vehicle is in an AWD lock state, this mode is not displayed.
For detailed information, refer to the “All Wheel Drive” in chapter 6.
Master warning group
This warning light informs the driver of the following situations.
- Forward Collision-Avoidance Assist malfunction
- Forward Collision-Avoidance Assist radar blocked
- Blind-Spot Collision-Avoidance Assist malfunction (if equipped)
- Blind-Spot Collision-Avoidance Assist radar blocked (if equipped)
- LED headlight malfunction (if equipped)
- High Beam Assist malfunction (if equipped)
- Smart Cruise Control malfunction (if equipped)
- Smart Cruise Control radar blocked (if equipped)
- Tire Pressure Monitoring System (TPMS) malfunction
The Master Warning Light illuminates if one or more of the above warning situations occur.
At this time, a Master Warning icon will appear beside the User Settings icon ( ), on the cluster display.
If the warning situation is solved, the master warning light will be turned off and the Master Warning icon will disappear.
Tire Pressure
This mode displays information related to Tire Pressure. For more details, refer to “Tire Pressure Monitoring System (TPMS)” in chapter 8.
User Settings Mode![2023 Hyundai Santa-Cruz-Display Setting-Screen Messages Guide-fig 15](https://www.autouserguide.com/wp-content/uploads/2024/02/2023-Hyundai-Santa-Cruz-Display-Setting-Screen-Messages-Guide-fig-15.png)
In this mode, you can change the settings of the instrument cluster, doors, lamps, etc.
- Driver Assistance
- Cluster
- Lights
- Door
- Convenience
- Units
The information provided may differ depending on which functions apply to your vehicle.
Quick guide (Help)
This mode provides quick guides for the systems in the User Settings mode.
Select an item, press and hold the OK button. For more details about each system, refer to this Owner’s Manual.
Information
When the infotainment system is applied, only the User’s Setting mode on the infotainment system is supported but the User’s Setting mode on the instrument cluster is not supported.
Driver Assistance
Items | Explanation |
Speed Limit (if equipped) | To adjust the Speed Limit function.
For more details, refer to “Intelligent Speed Limit Assist (ISLA)” in chapter 7 |
Warning Timing | To adjust the warning timing of Driver Assistance systems.
|
Warning Volume | To adjust the warning volume of Driver Assistance systems.
|
Driver Attention Warning |
To activate or deactivate Leading Vehicle Departure Alert.
To alert the driver’s inattentive driving. For more details, refer to “Driver Attention Warning (DAW)” in Chapter 7. |
Forward Safety |
To adjust Forward Collision-Avoidance Assist
For more details, refer to “Forward Collision-Avoidance Assist (FCA)” in chapter 7. |
Lane Safety |
To adjust Lane Keeping Assist
For more details, refer to “Lane Keeping Assist (LKA)” in chapter 7. |
Items | Explanation |
Blind-Spot Safety |
To activate or deactivate Safe Exit Warning. For more details, refer to “Safe Exit Warning (SEW)” in chapter 7. |
To adjust Blind-Spot Collision-Avoidance Assist.
For more details, refer to “Blind-Spot Collision-Avoidance Assist (BCA)” in chapter 7. |
|
Parking Safety |
To activate or deactivate Rear Cross-Traffic Safety. For more details, refer to “Rear Cross-Traffic Collision-Avoidance Assist (RCCA)” in chapter 7. |
Cluster
Items | Explanation |
Select Theme | You can select the theme of the cluster.
|
Service Interval | To activate or deactivate the service interval function. |
Reset fuel economy |
To reset the fuel economy displayed
|
Wiper/Lights Display |
When activated, the cluster display shows the selected Wiper/Light mode whenever you change the mode. |
Icy Road Warning | To activate or deactivate the icy road warning. |
Welcome Sound | To activate or deactivate the welcome sound. |
Information
To use the service interval menu, consult an authorized HYUNDAI dealer.
If the service interval is activated and the time and distance are adjusted, messages are displayed in the following situations each time the vehicle is turned on.
- Service in: Displayed to inform the driver of the remaining mileage and days to service.
- Service required: Displayed when the mileage and days to service have been reached or passed.
Information
If any of the following conditions occur, the mileage and number of days to service may be incorrect.
- The battery cable is disconnected.
- The fuse switch is turned off.
- The battery is discharged.
Lights
Items | Explanation |
Illumination | Adjust the illumination level.
|
One Touch Turn Signal |
For more details, refer to “Lighting” in chapter 5. |
Ambient Light Brightness (if equipped) |
|
Ambient Light Color (if equipped) |
|
Headlight Delay | To activate or deactivate the headlight delay function.
For more details, refer to “Lighting” in chapter 5. |
High Beam Assist | To activate or deactivate High Beam Assist.
For more details, refer to “High Beam Assist (HBA)” in chapter 5. |
Door
Items | Explanation |
Auto Lock |
|
Auto Unlock |
|
2 Press Unlock |
Therefore, all doors will unlock if the door unlock button is pressed.
|
Convenience
Items | Explanation |
Rear Occupant Alert (if equipped) |
To activate or deactivate the Rear Occupant Alert. For more details, refer to the “Rear Occupant Alert (ROA) system” in Chapter 5. |
Welcome Mirror/Light |
For more details, refer to ”Welcome System” in chapter 5.” |
Wireless Charging System (if equipped) | To activate or deactivate the wireless charging system in the front seat.
For more details, refer to “Wireless Smart Phone Charging System” in Chapter 5. |
Units
Items | Explanation |
Speed Unit | To select the speed unit.
|
Temperature Unit | Select the temperature unit.
|
Fuel Economy Unit | To select the fuel economy unit.
|
Tire Pressure Unit | Select the tire pressure unit.
|
Information
The information provided may differ depending on which functions apply to your vehicle.
2024 Hyundai SANTA CRUZ Specs, Price, Features, Mileage And Review
Trip Computer (Type A: 4.2” LCD)
The trip computer is a microcomputer-controlled driver information system that displays information related to driving.
Information
Some driving information stored in the trip computer (for example Average Vehicle Speed) resets if the battery is disconnected.
Trip modes
To change the trip mode, toggle the “, ” switch on the steering wheel
- Manual reset
To clear the average fuel economy manually, press the OK switch on the steering wheel for more than 1 second when the Average Fuel Economy is displayed. - Automatic reset
To automatically reset the average fuel economy, select between ‘After Ignition’ or ‘After Refueling’ from the Settings menu in the instrument cluster.- After Ignition: When the engine has been OFF for 3 minutes or longer the average fuel economy will reset automatically.
- After Refueling: The average fuel economy will reset automatically after adding 6 liters (1.6 gallons) of fuel or more and after driving speed exceeds 1 mph (1 km/h).
Drive info
Trip distance (1), average fuel economy (2), and instant fuel economy (3) are displayed. The information is combined for each ignition cycle. However, when the engine has been OFF for 3 minutes or longer the Drive Info screen will reset. To reset manually, press the OK switch on the steering wheel for more than 1 second when ‘Drive Info’ is displayed.
Since refuel(l)ing
Trip distance (1), average fuel economy (2), and instant fuel economy (3) after the vehicle has been refueled are displayed. To reset manually, press the OK switch on the steering wheel for more than 1 second when ‘Since Refueling’ is displayed.
Accumulated Info
Accumulated trip distance (1), average fuel economy (2), and instant fuel economy (3) are displayed. The information is accumulated starting from the last reset. To reset manually, press the OK switch on the steering wheel for more than 1 second when ‘Accumulated Info’ is displayed.
Digital speedometer
A digital speedometer display shows the speed of the vehicle.
Trip Computer (Type B: 10.25” LCD)
The trip computer is a microcomputer-controlled driver information system that displays information related to driving.
Information
Some driving information stored in the trip computer (for example Average Vehicle Speed) resets if the battery is disconnected.
Trip modes
To change the trip mode, toggle the “, ” switch on the steering wheel
- Manual reset
To clear the average fuel economy manually, press the OK switch on the steering wheel for more than 1 second when the Average Fuel Economy is displayed. - Automatic reset
To automatically reset the average fuel economy, select between ‘After Ignition’ or ‘After Refueling’ from the Settings menu in the instrument cluster.- After Ignition: When the engine has been OFF for 3 minutes or longer the average fuel economy will reset automatically.
- After Refueling: The average fuel economy will reset automatically after adding 6 liters (1.6 gallons) of fuel or more and after driving speed exceeds 1 mph (1 km/h).
For the 10.25-inch instrument cluster, you can check the fuel economy in the center bottom of the cluster.
Drive info
Trip distance (1), average fuel economy (2), and total driving time (3) are displayed. The information is combined for each ignition cycle. However, when the engine has been OFF for 3 minutes or longer the Drive Info screen will reset. To reset manually, press the OK switch on the steering wheel for more than 1 second when ‘Drive Info’ is displayed.
Since refueling
Trip distance (1), average fuel economy (2), and total driving time (3) after the vehicle has been refueled are displayed.
To reset manually, press the OK switch on the steering wheel for more than 1 second when ‘Since Refueling’ is displayed.
Accumulated info
Accumulated trip distance (1), average fuel economy (2), and total driving time (3) are displayed. The information is accumulated starting from the last reset. To reset manually, press the OK switch on the steering wheel for more than 1 second when ‘Accumulated Info’ is displayed.
Digital speedometer
A digital speedometer display shows the speed of the vehicle.
FAQs
To adjust the brightness of the display screen on your 2023 Hyundai Santa Cruz, simply navigate to the settings menu using the touchscreen interface, then select “Display Settings,” and adjust the brightness slider accordingly.
The “Day/Night Mode” option in the display settings of the 2023 Hyundai Santa Cruz allows you to automatically adjust the screen’s brightness and color scheme based on the time of day for optimal visibility and reduced eye strain during nighttime driving.
To customize the layout of the display screen in your 2023 Hyundai Santa Cruz, access the display settings menu, then select “Layout Options,” where you can choose from various preset layouts or create your personalized layout to suit your preferences.
The “Screen Off” feature in the display settings of the 2023 Hyundai Santa Cruz allows you to temporarily turn off the display screen to minimize distractions while driving, without affecting the functionality of other vehicle systems.
To enable or disable screen animations on the display screen of your 2023 Hyundai Santa Cruz, navigate to the display settings menu and toggle the “Screen Animations” option according to your preference.
Yes, you can adjust the color temperature of the display screen on your 2023 Hyundai Santa Cruz by accessing the display settings menu and selecting the “Color Temperature” option, where you can choose from predefined settings or manually adjust the color temperature to your liking.
The “Auto-Dimming” feature in the display settings of the 2023 Hyundai Santa Cruz automatically adjusts the brightness of the screen based on ambient light conditions, providing optimal visibility without causing glare or discomfort to the driver.
To reset the display settings to their default values on your 2023 Hyundai Santa Cruz, navigate to the settings menu, select “Display Settings,” and choose the “Reset to Default” option, which will revert all display settings to their factory presets.
Yes, you can change the language of the display screen on your 2023 Hyundai Santa Cruz by accessing the settings menu, selecting “Language & Input,” and choosing your preferred language from the available options.
The 2023 Hyundai Santa Cruz offers safety features related to display settings, such as the ability to customize the display layout for quick access to essential information, as well as options to adjust brightness and color temperature to enhance visibility and reduce driver fatigue.
The display screen of the 2023 Hyundai Santa Cruz integrates seamlessly with the vehicle’s navigation system, providing turn-by-turn directions, points of interest, and real-time traffic updates to help drivers reach their destinations efficiently.
Yes, the 2023 Hyundai Santa Cruz offers accessibility options for the display screen, including features like voice commands, enlarged text, and customizable layouts, making it easier for drivers of all abilities to interact with the infotainment system safely.
To adjust the screen timeout settings on the display screen of your 2023 Hyundai Santa Cruz, go to the settings menu, select “Display Settings,” and choose the “Screen Timeout” option, where you can set the duration after which the screen will automatically turn off to conserve power.
Yes, you can change the wallpaper or background image on the display screen of your 2023 Hyundai Santa Cruz by accessing the display settings menu and selecting the “Wallpaper” option, where you can choose from preloaded images or upload your custom image.
The display screen of the 2023 Hyundai Santa Cruz enhances the overall driving experience by providing easy access to essential vehicle information, entertainment features, and navigation tools in a user-friendly interface, contributing to a more enjoyable and convenient driving environment.
Useful Links:
View Full PDF: 2023 Hyundai Santa-Cruz Owner’s Manual | Auto User Guide
2024 Hyundai SANTA CRUZ Specs, Price, Features, Mileage And Review
Relay and Fuses Guide: 2023 Hyundai Santa-Cruz Fuse Diagrams