2024 RAM 2500 LCD Display Owner’s Manual
This guide will cover the 2024 RAM 2500 LCD Display, which gives drivers vital information and better control. Discover this high-tech display’s features and benefits for better driving.
2024 RAM 1500 Specs, Price, Features, Mileage And Review
Video: 2024 RAM 2500 Dashboard Warning Indicators
INSTRUMENT CLUSTER DISPLAY LOCATION AND CONTROLS
- Instrument Cluster Display Screen
- Instrument Cluster Display Controls
The system allows the driver to select information by pushing the following instrument cluster display control buttons located on the left side of the steering wheel. 
Base/Midline Instrument Cluster Display Control Buttons
- Left Arrow Button
- Up Arrow Button
- Right Arrow Button
- Down Arrow Button
- OK Button
- Left Arrow Button
- Up Arrow Button
- Right Arrow Button
- Down Arrow Button
- OK Button
- Menu Button
Up 
And Down Arrow Buttons: 
Using the up or down arrow button allows you to cycle through the Main Menu Items. Left 
And Right 
Arrow Buttons: Using the left or right arrow button allows you to cycle through the submenu items of the Main menu item. NOTE:
- Holding the up/down or left / right arrow button will loop the user through the currently selected menu or options presented on the screen.
- Main menu and submenus wrap for continuous scrolling.
- Upon returning to the main menu, the last submenu screen viewed within that main menu will be displayed.
OK Button: For Digital Speedometer:
- Pushing the OK button changes units (mph or km/h). Menu Button
- Press Menu button for Home Screen display.
- Navigate left or right to highlight desired tile. Press OK to select desired. Once OK is pressed, cluster will navigate to selected submenu (e.g. “Audio”).
NOTE: Exiting the Home Screen Speed Limit tile and Navigation tile with no Ethernet navigates to the Speedometer submenu.
- Press up or down to select different screen within selected category.
- If Menu button is pressed while in this view, cluster will return to previously displayed screen.
- Press and hold OK button to enter edit mode. ○ Instruction text may overlay lower tachometer
For Screen Setup:
- OK button allows user to enter menu and submenus.
- Within each submenu layer, the up and down arrow buttons will allow the user to select the item of interest.
- Pushing the OK button makes the selection and a confirmation screen will appear (returning the user to the first page of the submenu).
- Pushing the left arrow button will exit each submenu layer and return to the main menu.
Custom Tile Configuration To customize the instrument cluster further, you are able to select up to five tiles to display information based on your needs.
- Press the MENU button for the Home Screen display
- Navigate Left or Right to highlight desired tile
- Press OK to select the tile and navigate to the selected submenu and press OK again to add your selection to your tile view
- The main menu options of the home screen are Driver Info, Vehicle Info, Navigation If Equipped, Audio, and Off Road
You can customize your Instrument Cluster Display with up to five tiles that may consist of the following: NOTE: These options may vary based on your vehicle trim level.
- Navigation
- Route Set / Route Not Set
- TripA/TripB
- Vehicle Info
- Coolant Temp
- Trans Temp
- Oil Temp
- Oil Pressure
- Battery Voltage
- Oil Life
- Tire Pressure
- Fuel Economy
- Air Suspension
- Driver Info
- Driver Assist
- Audio
- Audio Info
- Off Road
- Selec-Terrain / Air Suspension Status
- Steering Angle
- Pitch
- Roll
- Trailer Tow
- Trailer Trip
- Trailer Brake
- Trailer Tire Pressure Monitor
OIL LIFE RESET Use this QR code to access your digital experience. Your vehicle is equipped with an engine oil change indicator system. The “Oil Change Required” message will display in the instrument cluster display after a Scan me single chime has sounded, to indicate the next scheduled oil change interval. The engine oil change indicator system is duty cycle based, which means the engine oil change interval may fluctuate, dependent upon your personal driving style. 
NOTE: Use the steering wheel instrument cluster display con-trols for the following procedure. Oil Life Reset Procedure
- Without pushing the brake pedal, push the ENGINE START/STOP button and place the ignition to the ON/RUN position (do not start the engine).
- Push and release the down arrow button to scroll downward through the main menu to “Vehicle Info.”
- Push and release the right arrow button to access the ”Vehicle Info” screen, then scroll up or down to select “Oil Life.”
- Push and hold the right arrow button to select “Reset”.
- Push and release the down arrow button to select “Yes,” then push and release the right arrow button to reset the Oil Life to 100%.
- Push and release the up arrow button to exit the instrument cluster display screen.
Secondary Method Of Resetting Engine Oil Life
- Without pressing the brake pedal, push the ENGINE START/STOP button and place the ignition to the ON/RUN position (do not start the engine).
- Fully press the accelerator pedal, slowly, three times within ten seconds.
- Without pushing the brake pedal, push the ENGINE START/STOP button once to return the ignition to the OFF position.
NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary, repeat this procedure. DISPLAY MENU ITEMS Push and release the up or down arrow button until the desired selectable menu icon is highlighted in the instrument cluster display. Speedometer Push and release the up or down arrow button until the speedometer menu item is highlighted in the instrument cluster display. Push and release the rightarrow button to cycle the display between mph and km/h. Driver Assist The Driver Assist menu displays the status of the Adap-tive Cruise Control (ACC) and LaneSense systems. Push and release the up or down arrow button until the Driver Assist menu is displayed in the instru-ment cluster display. Adaptive Cruise Control (ACC) Feature The instrument cluster display displays the current ACC system settings. The information displayed depends on ACC system status. Push the ACC on/off button (located on the steering wheel) until one of the following displays in the instru-ment cluster display: Adaptive Cruise Control Off When ACC is deactivated, the display will read “Adaptive Cruise Control Off.” Adaptive Cruise Control Ready When ACC is activated but the vehicle speed setting has not been selected, the display will read “Adaptive Cruise Control Ready.” Push the SET + or the SET- button (located on the steering wheel) and the following will display in the instrument cluster display: ACC SET When ACC is set, the set speed will display in the instrument cluster. The ACC screen may display once again if any ACC activ-ity occurs, which may include any of the following:
- Distance Setting Change
- System Cancel
- Driver Override
- System Off
- ACC Proximity Warning
- ACC Unavailable Warning
LaneSense The instrument cluster display displays the current LaneSense system settings. The information displayed depends on the LaneSense system status and the condi-tions that need to be met. Vehicle Info Push and release the up or down arrow button until the Vehicle Info menu item is highlighted in the instrument cluster display. Push and release the right arrow button to enter the submenus items of Vehicle Info. Follow the directional prompts to access or reset any of the following Vehicle Info submenu items: MIDLINE OR HIGHLINE CLUSTER
- Tire Pressure Monitor System
- Coolant Temperature
- Trans Temperature
- Oil Temperature
- Oil Pressure
- Exhaust Brake
- Boost Pressure
- Diesel Particulate Filter
- Oil Life
- Fuel Filter Life
- Battery Voltage
- Gauge Summary
- Coolant Temp
- Trans Temp
- Oil Temp
- Oil Pressure
- Engine Hours
PREMIUM CLUSTER
- Fuel Economy
- Average
- Current
- Range to Empty
- Gauge Summary
- Coolant Temperature
- Battery Voltage
- Trans Temperature
- Oil Summary
- Oil Temperature
- Oil Life
- Oil Pressure
- Tire Pressure Monitor System
- Diesel Summary
- Exhaust Brake
- Boost Pressure
- Fuel Filter Life
- Engine Hours
Off-Road Push and release the up or down arrow button until the Off Road menu icon is displayed in the instrument cluster display. Push and release the left or right arrow button to scroll through the information submenus.
- Drivetrain
- Front Wheel Angle: displays the graphical and numerical value of the calculated average front wheel angle from the steering wheel orientation.
- Transfer Case Lock Status: displays “Lock” graphic only during 4WD High, 4WD High Part Time, 4WD Low status.
- Axle Lock And Sway Bar Status (If Equipped): dis-plays front and rear or rear only axle locker graphic, and sway bar connection graphic with text message (connected or disconnected).
- Pitch And Roll
- Displays the pitch and roll of the vehicle in the graphic with the angle number on the screen.
NOTE: When vehicle speed becomes too high to display the pitch and roll, “- -” will display in place of the numbers, and the graphic will be grayed out. A message indicat-ing the necessary speed for the feature to become available will also display. Fuel Economy Push and release the up or down arrow button until the Fuel Economy menu item is highlighted in the instrument cluster display. Push and Hold the right arrow button to reset Average Fuel Economy
- Current Fuel Economy Gauge
- Average Fuel Economy Value
- Range To Empty
Trip A/Trip B Push and release the up or down arrow button until the Trip menu item is highlighted in the instrument cluster display. Push and release the rightarrow button to enter the submenus of Trip A and Trip B. The Trip A or Trip B information will display the following:
- Distance
- Average Fuel Economy
- Elapsed Time
Push and hold the right arrow button to reset all information. Navigation Push and release the up or down arrow button until the Navigation display title is highlighted in the instrument cluster display, “Hold OK to Start Route” will display when no active route is set. “Hold OK to Cancel Route” will display when active route is set. Use the left or right arrow button to zoom in or out on the display. Trailer Tow Push and release the up or down arrow button until the Trailer Tow menu item is highlighted in the instrument cluster display. Push and release the right or left arrow button to cycle through the following trailer tow information:
- Trip (trailer specific) Distance: Push and hold the OK button to reset the distance.
- Integrated Trailer Brake Module (ITBM):
- Braking Output
- Trailer Type
- ITBM Gain
- Trailer Light Check: Push and hold the OK button to begin the Trailer Light Test sequence .
- Trailer Tire Pressure Monitoring: The Instrument Cluster Display will display the Trailer Tire Pressure for a connected trailer with sensors that match the active trailer profile. When a low tire is present, the low tire value will be displayed in red, and the affected low tire will have a red glow. “Trailer Tire Low“ will be displayed on the center bottom of the Instrument Cluster Display screen.
Audio Push and release the up or down arrow button until the Audio Menu icon/title is highlighted in the instrument cluster display. This menu will display the audio source information, including the Song name, Artist name, and audio source with an accompanying graphic. Phone Call Status When a call is incoming, a Phone Call Status pop-up will display on the screen. The pop-up will remain until the phone is answered or ignored NOTE: The call status will temporarily replace the previous= media source information displayed on the screen. When the pop-up is no longer displayed, the display will return to the last used screen. Messages Push and release the up or down arrow button until the Messages Menu item is highlighted. This feature shows the number of stored warning messages. Push and release the right or left arrow button to cycle through stored messages. Settings Personal Settings allows the driver to set and recall features when the transmission is in PARK. Push and release the up or down arrow button until Settings displays in the instrument cluster display. Follow the prompts to display and set any of the following Vehicle Settings. NOTE: Your vehicle may be equipped with the following settings.
- If equipped with a base radio (Non-Touchscreen) Vehicle Settings will be included in the instrument cluster display.
- If equipped with a Touchscreen radio, the Vehicle Settings will be included in the radio head unit.
MIDLINE OR HIGHLINE CLUSTER
|
Upper Left or Right |
||
| None | Time | Current Econ |
| Compass | Range | Trip A Distance |
| Outside Temp | Average Econ | Trip B Distance |
| Trailer Trip – If Equipped | Trailer Brake | Oil Pressure |
| Coolant Temp | Oil Temp | Battery Voltage |
| Trans Temp | Oil Life | Exhaust Brake – If Equipped |
| Boost Pressure– If Equipped | Fuel Filter Life – If Equipped | |
|
Upper Center |
||
| None | Compass | Outside Temp |
| Time | Range To Empty | Average Econ |
| Current Econ | Trip A Distance | Trip B Distance |
| Trailer Trip | Audio (show/hide) | Speedometer |
| Menu TItle | ||
|
Left or Right |
||
| None | Range To Empty | Average Econ |
| Menu Icon | Coolant Temp | Oil Temp |
| Trans Temp | Oil Life | Fuel Filter Life – If Equipped |
|
Lower Left or Right |
||
| None | Time | Current Econ |
| Compass | Range | Trip A Distance |
| Outside Temp | Average Econ | Trip B Distance |
| Trailer Trip – If Equipped | Trailer Brake | Oil Pressure |
| Coolant Temp | Oil Temp | Battery Voltage |
| Trans Temp | Oil Life | Exhaust Brake – If Equipped |
| Boost Pressure– If Equipped | Fuel Filter Life – If Equipped | |
|
Favorite Menus |
||
| Speedometer | Vehicle Info | Driver Assist |
| Fuel Economy | Trip Info | Trailer Tow – If Equipped (show/hide) |
| Audio (show/hide) | Messages | Screen Setup |
| Commercial Settings | ||
Current Gear
- Off
- On Odometer
- No Decimal Point
- Decimal Point Defaults (Restores All Settings To Default Settings)
- Cancel
- Restore
PREMIUM CLUSTER Display Style
- Modern
- Traditional
|
Upper Left or Right |
||
| None | Time | Current Econ |
| Compass | Range | Trip A Distance |
| Outside Temp | Average Econ | Trip B Distance |
| Trailer Trip – If Equipped | ||
|
Upper Center |
||
| None | Badge | Compass |
| Outside Temp | Time | Range To Empty |
| Average Econ | Current Econ | Trip A Distance |
| Trip B Distance | Trailer Trip | Audio (show/hide) |
Current Gear
- Off
- On Odometer
- No Decimal Point
- Decimal Point
- Hide Fuel Gauge
- Hide Range
- Show Range
|
Favorite Menus |
||
| Trip Info | Navigation | Off Road |
| Trailer Tow – If Equipped (show/hide) | Audio (show/hide) | |
Defaults (Restores All Settings To Default Settings)
- Restore
- Cancel
Commercial Settings Commercial Settings allows the driver to set and recall additional features when the transmission is in PARK (P). Push and release the up or down arrow button until Commercial Settings displays in the instrument cluster display. Follow the prompts to enter the required PIN and enter the Commercial Settings submenu. Commercial Settings allows you to access the following features (if equipped):
- Backup Alarm
- ParkSense
- Aux Switches
- PIN Setup
NOTE: If the vehicle’s PIN is forgotten or not known, see an authorized dealer to have the PIN reset. If the PIN is known, you may enter the PIN and restore to the factory settings. The Default PIN will be “0000”.
Useful Link:
View Full PDF: 2024 RAM 2500 Owner’s Manual | Auto User Guide
2024 RAM 1500 Specs, Price, Features, Mileage And Review 2024 RAM 2500 Warning and Indicator Lights Guide