2023 Subaru Solterra Touring Cruise Control User Guide
The 2023 Subaru Solterra Touring is equipped with advanced EyeSight Driver Assist Technology, featuring Dynamic Radar Cruise Control and Lane Tracing Assist. These systems monitor traffic movement, optimize cruise control, and warn you when you’re swaying outside your lane. The Pre-Collision System can apply full braking force and bring you to a complete stop in emergency situations.
2023 Subaru Solterra Specs, Price, Features, Mileage (Brochure)
Subaru Cruise control Guide
The vehicle can be driven at a set speed even if the accelerator pedal is not depressed.
Use the cruise control only on highways and express-ways.
WARNING
For safe use
- Driving safely is solely the responsibility of the driver. Therefore, do not overly rely on this system. The driver is solely responsible for paying attention to the vehicle’s surroundings and driving safely.
- Set the speed appropriately according to the speed limit, traffic flow, road conditions, weather conditions, etc. The driver is responsible for confirm-ing the set speed.
Situations in which cruise control should not be used
Do not use the cruise control in the following situations. As the system will not be able to provide appropriate control, using it may lead to an accident resulting in death or serious injury.
- On roads with sharp bends
- On winding roads
- On slippery roads, such as those covered with rain, ice or snow
WARNING
- On steep downhills, or where there are sudden changes between sharp up and down gradients Vehicle speed may exceed the set speed when driving down a steep hill.
- When it is necessary to disable the system:
System components
Meter display
- Set vehicle speed
- Cruise control indicator
Switches
- Driving assist switch
- Driving assist mode select switch
- Cancel switch
- “-” switch
- “+” switch/“RES” switch
Setting the vehicle speed
- Press the driving assist mode select switch to select cruise control.
The cruise control indicator will illu-minate.
- Using the accelerator pedal, accelerate to the desired vehicle speed (approxi-mately 20 mph [30 km/h] or more), and press the driving assist switch to set the set vehicle speed.
The vehicle speed at the moment the switch is released will be the set vehicle speed.
Adjusting the set vehicle speed
Adjusting the set vehicle speed using the switches
To change the set vehicle speed, press the “+” or “-” switch until the desired speed is dis-played.
- Increase set vehicle speed
- Decrease set vehicle speed
The set vehicle speed will increase or decrease as follows:
Short press adjustment: By 1 mph (1.6 km/h) or 1 km/h (0.6 mph) each time the switch is pressed Long press adjustment: Increases continuously while the switch is pressed and held
Increasing the set vehicle speed using the accelerator pedal
- Depress the accelerator pedal to accelerate the vehi-cle to the desired vehicle speed.
- Press the “+” switch.
2023 Subaru Solterra Specs, Price, Features, Mileage (Brochure)
Canceling/resuming control
- Press the cancel switch or driving assist switch to cancel control.
Control will also be canceled if the brake pedal is depressed. - Press the “RES” switch to resume control.
Automatic cancelation of the cruise control
In the following situations, the cruise control will be canceled automati-cally:
- When the vehicle speed drops approximately 10 mph (16 km/h) or more below the set vehicle speed
- When the vehicle speed drops below approximately 20 mph (30 km/h)
- When the brake control or output restriction control of a driving sup-port system operates (For exam-ple: PCS, drive-start control)
- When the parking brake has been operated
- Situations in which some or all of the functions of the system cannot operate:
Useful Links:
View Full PDF: Subaru Solterra 2023 Touring User Guide |Auo user Guide
2023 Subaru Solterra Specs, Price, Features, Mileage (Brochure)