Auto User Guide

2021 Toyota C-HR Fuses and Fuse Box Diagram User Guide

2021-Toyota-C-HR featured

Toyota-logo

2021 Toyota C-HR Fuses and Fuse Box Diagram User Guide

This Guide covers 2021 Toyota C-HR fuses and fuse box diagram. To diagnose electrical faults and optimize vehicle performance, you must know fuse placements and functions. Find fuse descriptions, layouts, and replacement advice.

2023 Toyota RAV4 Specs, Price, Features, Mileage (Brochure)

Video: 2021 Toyota C-HR Fuses 

Checking and replacing fuses

If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as nec-essary.

  1. Turn the engine switch off.
  2. Open the fuse box cover.
    • Engine compartment type A fuse box While pushing the 2 claws, lift up the cover. When closing the cover, make sure to attach the 2 claws.2021-Toyota-C-HR-Instrument-Cluster-Dashboard-How-to-use-fig-1
    • Engine compartment type B fuse box While pushing the 3 claws, lift up the cover. When closing the cover, make sure to attach the 3 claws.2021-Toyota-C-HR-Instrument-Cluster-Dashboard-How-to-use-fig-2
    • Engine compartment type C fuse box While pushing the 2 claws, lift up the cover. When closing the cover, make sure to attach the 2 claws.2021-Toyota-C-HR-Instrument-Cluster-Dashboard-How-to-use-fig-3
    • Left side instrument panel Remove the lid. Make sure to press the claw during removal or installation.2021-Toyota-C-HR-Instrument-Cluster-Dashboard-How-to-use-fig-4
  3. Remove the fuse with the pull-out tool.
    Only type A fuses can be removed using the pullout tool.2021-Toyota-C-HR-Instrument-Cluster-Dashboard-How-to-use-fig-5
  4. Check if the fuse is blown.
    1. Normal fuse
    2. Blown fuse
      • Except for type E:
        Replace the blown fuse with a new fuse of an appropriate amperage rating. The amperage rating can be found on the fuse box lid.
      • Type E:
        Contact your Toyota dealer.2021-Toyota-C-HR-Instrument-Cluster-Dashboard-How-to-use-fig-6
  • After a fuse is replaced
    • If the lights do not turn on even after the fuse has been replaced, a bulb may need replacement.
    • If the replaced fuse blows again, have the vehicle inspected by your Toyota dealer.
  • If there is an overload in a circuit
    The fuses are designed to blow, protecting the wiring harness from damage.
  • When replacing light bulbs
    Toyota recommends that you use genuine Toyota products designed for this vehicle. Because certain bulbs are connected to circuits designed to prevent overload, non-genuine parts or parts not designed for this vehicle may be unusable.

2023 Toyota RAV4 Specs, Price, Features, Mileage (Brochure)

WARNING

  • To prevent system breakdowns and vehicle fire
    Observe the following precautions.
    Failure to do so may cause damage to the vehicle, and possibly a fire or injury.
    • Never use a fuse of a higher amperage rating than that indicated, or use any other object in place of a fuse.
    • Always use a genuine Toyota fuse or equivalent.
      Never replace a fuse with a wire, even as a temporary fix.
    • Do not modify the fuses or fuse boxes.

NOTICE

  • Before replacing fuses
    Have the cause of electrical overload determined and repaired by your Toyota dealer as soon as possible.

View Full PDF: Toyota C-HR 2021 User Manual

2023 Toyota RAV4 Specs, Price, Features, Mileage (Brochure)

2021 Toyota C-HR Instrument Cluster Dashboard | How to use

Video: 2021 Toyota C-HR Fuses 

Scroll to Top