2022 Toyota Corolla Cross Fuses and Fuse Box Diagram User Guide
The 2022 Toyota Corolla Cross fuses and fuse box diagram are covered in this guide. Learn each fuse’s location, purpose, and troubleshooting advice to help keep your car’s electrical systems in good working order.
2023 – 2024 Toyota Corolla Cross Review, Price, Features, And Mileage (Brochure)
Checking and replacing fuses
If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary.
Checking and replacing fuses
- Turn the engine switch off.
- Open the fuse box cover.
- Engine compartment
Push the tabs in and lift the lid off.
- Under the driver’s side instrument panel
Remove the lid.
Make sure to push the claw when removing/installing the lid.
- Engine compartment
- Remove the fuse with the pullout tool.
Only type A fuse can be removed using the pullout tool.
- Check if the fuse is blown.
Replace the blown fuse with a new fuse of an appropriate amperage rating. The amperage rating can be found on the fuse box lid.
Type A
- Normal fuse
- Blown fuse
Type B
- Normal fuse
- Blown fuse
Type C
- Normal fuse
- Blown fuse
Type D
- Normal fuse
- Blown fuse
2023 – 2024 Toyota Corolla Cross Review, Price, Features, And Mileage (Brochure)
After a fuse is replaced
- When installing the lid, make sure that the tab is installed securely.
- If the lights do not turn on even after the fuse has been replaced, a bulb may need replacement.
- If the replaced fuse blows again, have the vehicle inspected by your Toyota dealer.
If there is an overload in a circuit
The fuses are designed to blow, protecting the wiring harness from damage.
WARNING
To prevent system break-downs and vehicle fire
Observe the following precautions.
Failure to do so may cause damage to the vehicle, and possibly a fire or injury.
- Never use a fuse of a higher amperage rating than that indicated, or use any other object in place of a fuse.
- Always use a genuine Toyota fuse or equivalent.
Never replace a fuse with a wire, even as a temporary fix. - Do not modify the fuses or fuse boxes.
NOTICE
Before replacing fuses
Have the cause of electrical overload determined and repaired by your Toyota dealer as soon as possible.
How to Replace the Fuse of the 2022 Toyota Corolla Cross
Replacing a fuse in the 2022 Toyota Corolla Cross is a relatively simple process. Here’s a step-by-step guide:
Materials:
- The new fuse of the correct amperage.
- Fuse puller or needle-nose pliers.
Instructions:
-
Locate the Fuse Box: The fuse box is typically located under the dashboard on the driver’s side or in the engine compartment.
-
Turn Off the Vehicle: Ensure that the vehicle’s ignition is turned off to prevent any electrical hazards.
-
Identify the Blown Fuse: Use the fuse diagram located on the fuse box cover to identify the specific fuse corresponding to the malfunctioning component.
-
Remove the Blown Fuse: Using a pair of needle-nose pliers or a fuse puller (often included in the fuse box), carefully pull out the blown fuse from its slot. Be gentle to avoid damaging the fuse or the fuse box.
-
Check the Fuse: Inspect the blown fuse visually to confirm that it’s blown. You should see a break in the metal wire inside the fuse.
-
Select a Replacement Fuse: Choose a replacement fuse with the same amperage rating as the blown one. Using a fuse with a different amperage rating could cause electrical problems or damage to the vehicle’s systems.
-
Insert the Replacement Fuse: Carefully insert the replacement fuse into the empty slot in the fuse box. Ensure it is securely seated in the slot.
-
Test the Component: Turn on the vehicle’s ignition and test the component associated with the fuse you replaced (e.g., lights, power windows) to confirm that it’s now functioning properly.
-
Replace the Fuse Box Cover: If you removed the fuse box cover, make sure to securely reattach it to protect the fuses.
-
Dispose of the Blown Fuse: Safely dispose of the blown fuse. It’s a good practice to keep spare fuses in your vehicle for future use.
-
Record the Replacement: Keep a record of the replacement fuse for future reference. You can maintain a maintenance log.
-
Consult a Professional if Necessary: If you’re unsure about replacing the fuse yourself or if the issue persists after replacement, consult a professional mechanic or electrician for further assistance.
Tips:
- Always use a fuse with the correct amperage rating to prevent electrical issues or damage to the vehicle.
FAQs
Signs of a blown fuse include malfunctioning electrical components, such as lights or power windows not working.
The fuse box in the Corolla Cross is typically located under the dashboard on the driver’s side or in the engine compartment.
The Corolla Cross typically has two fuse boxes: one under the dashboard and one in the engine compartment.
Ensure the vehicle is turned off before replacing a fuse to avoid electrical shock or damage to the vehicle’s systems.
Useful Links
View full PDF: Toyota Corolla Cross 2022 User Guide | Auto User Guide
2023 – 2024 Toyota Corolla Cross Review, Price, Features, And Mileage (Brochure)
Warning Indicators: 2022 Toyota Corolla Cross Instrument Cluster Guide