2025 Volkswagen Tiguan Fuses and Fuse Box User Guide

The 2025 Volkswagen Tiguan includes a robust fuse and fuse box system to protect electrical components. Its convenient location provides safe and efficient power distribution, allowing users to readily replace blown fuses for smooth vehicle running.

2023 – 2024 Volkswagen Tiguan Review, Price, Features And Mileage (Brochure)

Video: 2025 Volkswagen Tiguan Fuses 

Volkswagen Introduction to the topic Guide

At the time of publication we are unable to provide an complete overview of the locations of the fuses for the electrical consumers. This is because the vehicle is under constant development, because fuses are assigned differently depending on the vehicle equipment level and because several electrical consumers may use a single fuse. You can obtain more information about the fuse assignment from a suitably qualified workshop. Volkswagen recommends using an authorised repairer. Several electrical consumers can share a single fuse. Conversely, a single consumer could have more than one fuse. Therefore fuses should only be replaced when the cause of the fault has been rectified.

1. If a new fuse blows again shortly after fitting, have the electrical system checked by a suitably qualified workshop. Volkswagen recommends using an authorised repairer.

Fuses for emergency services
A fuse for the high-voltage system in the dash panel fuse box is labelled with a special tag to allow emergency services to de-energise the vehicle as quickly as possible. Never attempt to replace these fuses or swap them with other fuses in other slots → . If this fuse is faulty, always have it replaced by a suitably qualified workshop. Volkswagen recommends using an authorised repairer.

WARNING
The voltage in the high-voltage system can cause electric shocks, serious burns and death.

• Never touch the electrical cables in the bonnet space.
• Never repair or replace fuses of the high-voltage system yourself.
• Always have work performed by a suitably qualified workshop. Volkswagen recommends using an authorised repairer.

WARNING
Using unsuitable fuses, repairing fuses and bridging an electrical circuit without fuses can cause serious damage or a fire in the vehicle. This can result in serious or fatal injuries.

• Replace fuses only with fuses with the same rating and size. Make sure that the colour and markings are identical to the defective fuse.
• Never repair fuses.
• Never use a metal strip, paper clip or similar objects to replace a fuse.

NOTICE
The high-voltage fuses identified with special tags in the fuse box in the dash panel are intended for use only by the emergency services so that they can de-energise the vehicle in an emergency situation. If these high-voltage fuses are removed improperly, this can result in damage to the vehicle.

• Never remove the specially tagged fuses in the dash panel.
• Seek expert assistance if the high-voltage system was switched off. The vehicle is no longer ready to drive.

NOTICE
If a fuse is replaced when the ignition is switched on, the vehicle’s drive system is activated, lights are switched on or when other electrical consumers are switched on, this can damage the electrical system.

• Always deactivate the vehicle’s drive system and switch off the lights and other electrical consumers.
• Make sure that it is not possible to activate the vehicle’s drive system when changing a fuse.

NOTICE
Damage can also be caused at other locations in the electrical system if a fuse is replaced with a fuse that has a higher rating.

• Never replace a fuse with a fuse that has a higher rating.

NOTICE
Dirt and moisture in the fuse boxes can damage the electrical system.

• Protect open fuse boxes against the ingress of dirt and moisture.
• Avoid causing short circuits in the electrical system.
• Check that the covers of the fuse boxes are closed tight again and are not damaged.

There are also other fuses in the vehicle. These should be changed only by a suitably qualified workshop. Volkswagen recommends using an authorised repairer.

Fuses in the bonnet space

Opening the fuse box in the bonnet space

Fig. 1 In the bonnet space: fuse box.

1 Fuse box cover.
In some vehicles, a pair of plastic grippers for removing fuses is located on the inside of the cover of the fuse box or on the fuse carrier.

Removing the cover

1. Open the bonnet.
2. To unlock the fuse box cover, push the catches in the direction of the arrow .
3. Lift off the cover.

Installing the cover

1. Place the cover on the fuse box.
2. Press the cover down until the cover audibly engages into position on both sides.

Fuse overview of the fuses in the bonnet space
The overview shows the fuse locations of the electrical consumers relevant for the driver. The first column in the overview contains the location. The other columns contain the amp rating, the fuse type and the electrical consumer protected by the fuse. Depending on country and on the equipment of your vehicle, the fuse numbers and positions may differ to those given in the overview. If necessary, ask a suitably qualified workshop for the exact fuse layout. Volkswagen recommends using an authorised repairer.

Fuse assignment

Fig. 1 In the bonnet space: fuse locations. Fuse location .

F7	30 amps, ATO®, front wipers, right
F9	15 amps, ATO®, horn.
F10	30 amps, ATO®, front wipers, left
F11	7.5 amps, ATO®, air conditioning system.

Fuses in the dash panel

Opening the fuse box in the dash panel (left-hand drive vehicle)

Fig. 1 On the driver side: fuse box cover in the dash panel
(left-hand drive vehicle)

Removing the cover

1. Reach behind the cover and pull off in the direction of the arrow .

Installing the cover

1. Align the cover on the opposite side and fold it closed in the opposite direction to the arrow until it engages

Opening the fuse box in the dash panel (right-hand drive vehicle)

Fig. 2 On the front passenger side: fuse box cover in the dash panel (right-hand drive vehicle)

1. Open the glove box and empty if necessary.
2. Pull off the cover from above in the direction of the arrow

Installing the cover

1. Fit the cover in the opposite direction to the arrow until it engages at the top→ Fig. 2 .
2. Close the glove compartment.
   The overview shows the fuse locations of the electrical consumers relevant for the driver. The first column in the overview contains the location. The other columns contain the amp rating, the fuse type and the electrical consumer protected by the fuse.
   Depending on country and on the equipment of your vehicle, the fuse numbers and positions may differ to those given in the overview. If necessary, ask a suitably qualified workshop for the exact fuse layout. Volkswagen recommends using an authorised Volkswagen repairer.

Fuse assignment

Fig. 1 In the dash panel: fuse assignment.

Fuse location

F5	25 amps, ATO®, left exterior lighting.
F6	30 amps, ATO®, interior lighting.
F7	30 amps, ATO®, seat heating.
F13	40 amps, MAXI+®, central locking.
F13	40 amps, MAXI+®, central locking.
F20	15 amps, MINI®, telephone, USB   port.
F30	20 amps, ATO®, parts for the Infotainment system.
F32	25 amps, ATO®, rear seat heating.
F36	40 amps, MAXI+®, blower regulator.
F40	7.5 amps, MINI®, anti-theft alarm.
F43	7.5 amps, MINI®, air conditioning block, rear window heating relay.
F44	7.5 amps, MINI®, light switch (dipped beam), rain and light sensor, background lighting, ID. Light.
F46	7.5 amps, MINI®, display, Infotainment system control panel
F52	20 amps, ATO®, cigarette lighter, sockets.
F66	15 amps, ATO®, rear window wiper.
F67	30 amps, MAXI+®, rear window heating.

2023 – 2024 Volkswagen Tiguan Review, Price, Features And Mileage (Brochure)

Fuse locations for vehicles with factory-fitted bicycle carrier preparation:

F3	25 amps, ATO®, left trailer control unit.
F11	15 amps, ATO®, trailer control unit.
F29	15 amps, ATO®, trailer charging cable.
F31	25 amps, ATO®, right trailer control unit.

Electric windows and electrically adjustable seats may be protected by circuit breakers or control units which switch on again automatically a few seconds after the overload, e.g. frozen windows, has been rectified.

Changing blown fuses

Preparations

1. Deactivate the vehicle’s drive system and switch off the lights and all electrical consumers.

Detecting a blown fuse

Fig. 1 Blown fuse (illustration).

1. Shine a torch onto the fuse box.

You can see if a fuse is blown from the top and side through the transparent housing due to the melted metal strip

Fuse types

• Standard flat blade fuse (ATO®).
• Small flat blade fuse (MINI®).
• Large flat blade fuse (MAXI® or MAXI+®).

Fuses (ATO® – MINI® – MAXI® and MAXI+®).

Colour	Amp rating
Black	1 amps
Purple	3 amps
light brown	5 amps
Brown	7.5 amps
Red	10 amps
Blue	15 amps
Yellow	20 amps
White or transparent	25 amps
Green	30 amps
Orange	40 amps
Red	50 amps

Changing fuses

Fig. 2 Plastic grippers for pulling out and inserting a fuse
(illustration).

1. If present, take the plastic grippers out of the fuse box or the cover of the fuse box .
2. Push the plastic grippers clip suitable for the fuse type onto the fuse from the top or the side.
3. Remove the fuse.
4. If the fuse has blown, replace it with a new fuse with the same rating (same colour and same markings) and same size .
5. Once the new fuse has been inserted, put the plastic grippers back in the cover.
6. Insert the cover again or close the fuse box cover.

NOTICE
You can damage another location in the electrical system by using a fuse with a higher amp rating.

• Never replace a fuse with a fuse that has a higher rating.

How to Replace the Fuses of the 2025 Volkswagen ID.4

To replace the fuses in a 2025 Volkswagen ID.4, follow these steps:

Materials:

1. The new fuse of the correct amperage.
2. Fuse puller or needle-nose pliers.

Step-by-Step Instructions:

1. Turn Off the Vehicle: Ensure the ignition is off and the key is removed to prevent any electrical mishaps.

2. Access the Appropriate Fuse Box: Depending on the malfunctioning component, identify and open the relevant fuse box.

3. Locate the Faulty Fuse: Using the fuse diagram, pinpoint the fuse associated with the malfunctioning component.

4. Inspect the Fuse: A blown fuse will have a broken filament or appear blackened.

5. Remove the Faulty Fuse: Use a fuse puller or a pair of needle-nose pliers to gently extract the damaged fuse.

6. Insert a New Fuse: Replace it with a fuse of the same amperage rating. Using a fuse with a higher rating can cause electrical damage.

7. Test the Component: Turn on the vehicle and check if the component is functioning correctly.

8. Tips:
   Always replace fuses with one of the same amperage to prevent electrical issues.

Useful Links:

2023 – 2024 Volkswagen Tiguan Review, Price, Features And Mileage (Brochure)

2025 Volkswagen Tiguan Warning and Indicator Lights User Guide

Video: 2025 Volkswagen Tiguan Fuses