2015 Alfa Romeo MiTo Seats Setup Instructions
Within the 2015 Alfa Romeo MiTo, the seats have been carefully planned to provide ease while also combining style and functionality. The cockpit of the car has been carefully designed to give the driver and guests the most comfort and support possible during their trips. With many features and options that can be changed, this guide will show you how to set up and get the most out of the seats in your 2015 Alfa Romeo MiTo. This will let you enjoy a luxurious and personalized driving experience that is just right for you.
SEATS
FRONT SEATS
Caution: All adjustments must be made with the car stationary.
Lengthwise adjustment
Lift the lever A fig. 22 and push the seat forwards or backward: in the driving position, your arms should rest on the rim of the steering wheel.
Important: After releasing the adjustment lever, always check that the seat is locked on the guides by trying to move it back and forth. If the seat is not locked into place, it may unexpectedly slide and cause the driver to lose control of the car.
Height adjustment
Move lever B fig. 22 up or down until the desired height is achieved.
IMPORTANT: Carry out the adjustment whilst seated in the driver’s seat.
Backrest angle adjustment
Turn knob C fig. 22 until the desired position is reached.
Important: For maximum safety, keep the back of your seat upright, lean back into it, and make sure the seat belt fits closely across your chest and pelvis.
Lumbar adjustment (for versions/markets, where provided)
Turn knob D fig. 22 until the desired position is reached.
Backrest folding
To access the rear seats, pull handle E upwards fig. 22: the backrest will fold and the seat will slide forward when you push the backrest. Moving the backrest backward will return the seat to its initial position.
Important: Always check that the seat is firmly locked on the guides, trying to push it forwards and backward.
Seat heating (for versions/markets, where provided)
With the key at MAR-ON, press button A fig. 23 (one per seat) to activate/deactivate the function. When the function is enabled, the LED on the button switches on.
SPORTS CONFIGURATION FRONT SEATS (for versions/markets, where provided)
- Lengthwise adjustment
Lift the lever A fig. 24 and push the seat forwards or backward: in the driving position, your arms should rest on the rim of the steering wheel. - Backrest angle adjustment
Turn knob B fig. 24 until the desired position is reached. - Backrest folding
To access the rear seats, pull handle C upwards (located behind the backrest) fig. 24. Then release the lever and, pushing on the backrest, slide the seat forward.
REAR SEAT
On versions with sports configuration front seats, the rear seat is available with an integral or split seat and is only 2-seater.
EASY ENTRY
This function allows easy access to the rear seats. To access the rear seats, raise handle E and move the seat’s backrest forward: the seat moves forward automatically. Bringing the backrest back to its normal position will move the seat back to its initial position. If the backrest encounters an obstacle when moving back (e.g. the knees of the passenger in the back seat), the seat will stop, move forward by a few centimeters, and then stop in this position.
HEAD RESTRAINTS
FRONT
Head restraints are adjustable in height and they lock automatically into the desired position:
- upwards adjustment: raise the head restraint until it clicks into place;
- downwards adjustment: press button A fig. 25 and lower the head restraint.
Caution: Head restraints must be adjusted so that the head, rather than the neck, rests on them. Only in this case can they protect your head correctly.
To remove the head restraints:
- raise the head restraints to their maximum height;
- press buttons A and B fig. 25, then remove the head restraints by pulling them upwards.
“Anti-Whiplash” device
The head restraints are equipped with an “Anti-Whiplash” device, which reduces the distance between the head and head restraints in the event of a rear impact, thus mitigating the “whiplash” effect. The head restraint may move when the backrest is pressed by the occupant’s torso or hand: this behaviour is caused by the system and should not be considered a malfunction.
REAR
Two height-adjustable head restraints are provided for the back seats (to adjust the height see the previous paragraph). On some versions, a head restraint is also provided for the central seat. To remove the head restraints:
- raise the head restraints to their maximum height;
- Press buttons A fig. 26, then remove the head restraints by pulling them upwards.
FAQ’s
A: To adjust the driver’s seat, use the seat adjustment controls located on the side of the seat. You can move the seat forward, backward, up, and down.
A: Yes, you can adjust the angle of the driver’s seatback by using the seatback adjustment lever or knob, typically located on the side of the seat.
A: The ideal seat position is one that allows you to comfortably reach the pedals with a slight bend in your knees and have a clear view of the road while maintaining a relaxed posture.
A: The passenger seat can be adjusted similarly to the driver’s seat using the seat adjustment controls.
A: Some models may have a memory function that allows you to save and recall your preferred seat positions. Check your owner’s manual for details.
A: Yes, the headrests can be adjusted up or down for optimal comfort and safety. Simply press the release button and move the headrest as needed.
A: If your car is equipped with lumbar support, you can adjust it by using the lumbar adjustment controls on the side of the seat.
A: The rear seats in the Alfa Romeo MiTo may have limited adjustability, typically for folding them down to increase cargo space.
A: If your vehicle is equipped with memory seats, you can save different seat positions for multiple drivers.
A: To recline the rear seats for additional cargo space, locate the release lever or button in the rear seat area and fold the seatbacks down.
A: Follow the manufacturer’s recommendations for cleaning and maintaining the type of seats you have. Typically, a mild upholstery cleaner is suitable for fabric seats, while leather seats may require special care products.
A: Yes, the vehicle is likely equipped with LATCH (Lower Anchors and Tethers for Children) systems for securing child safety seats. Refer to your owner’s manual for specific instructions.
A: If equipped, the rear seat headrests can usually be adjusted by manually moving them up or down.
A: Depending on the model, the front passenger seat may have a recline adjustment feature. Look for the recline lever or knob on the seat.
A: Ensure that the seatbelt is positioned across your shoulder and chest and not cutting into your neck. Proper seatbelt height is essential for safety and comfort.
Useful Link
View Full PDF: 2015 Alfa Romeo MiTo User Manual | Auto User Guide
