2021 Aston Martin Vantage Fluid Checks and Capacities Guide

High-performance sports car the 2021 Aston Martin Vantage is recognized for its marriage of stunning design and exhilarating driving qualities. Regular fluid inspections and proper fluid levels must be maintained for the Vantage to perform at its best. This procedure not only ensures the longevity of the car but also a continually thrilling driving experience. We’ll go over the crucial fluid capacities and checks for the 2021 Aston Martin Vantage in this article to help owners and enthusiasts keep their precious asset in immaculate shape. A solid understanding of these essential components, from brake fluid to engine oil, and everything in between, will keep the Vantage operating smoothly and operating at its peak.

The 2021 Aston Martin Vantage is a true masterpiece in the field of superior automobiles. Its seamless marriage of performance and aesthetics makes it an alluring option for individuals who enjoy both luxury and speed. One must pay great attention to the fluids that keep this machine’s heart pumping in order to maintain its beauty and power. This manual will go into great detail regarding fluid capacity and tests for the 2021 Aston Martin Vantage, ensuring that every part functions flawlessly. These particulars—from oil, the engine’s lifeblood, to the accuracy of the cooling and brake systems—are more than simply technicalities; they hold the key to preserving the unwavering bond between the driver and the vehicle. The 2021 Aston Martin Vantage is more than simply a vehicle; it’s a thrilling adventure ready to be experienced. You can ensure that your Vantage always runs as smoothly as the day it left the dealership and delivers an unrivaled journey full of flair, speed, and grace by understanding these crucial fluid checks and capacities.

Fluid Checks and Capacities

Warning
Engine components may be hot and could cause severe burns.

1. Engine oil dipstick.
2. Engine oil filler cap.
3. Engine coolant reservoir.
4. Brake fluid reservoir1.
5. Forward engine cover
6. Charge-cooler coolant reservoir (under [5])2.

Engine Oil Level

Warning
Engine oil or components may be hot and could cause severe burns.

Caution
Running the engine with engine oil below the lower mark or above the upper mark can cause serious engine damage.
This vehicle’s warranty may be invalidated if damage is caused by the use of incorrect engine oil. Low quality or obsolete oils do NOT give the protection required by modern, high performance engines.
Failure to use engine oil that meets the required specification can cause excessive engine wear, a build up of sludge and deposits, and increased pollution. It could also lead to engine failure.

Engine Oil Level Check:

1. The vehicle should be on level ground.
2. Check the engine oil level every fourth fuel tank fill or weekly – which ever is the sooner.
   1. Run the engine until it reaches normal operating temperature.
   2. Turn the engine off and wait 15 minutes to allow the engine oil level to become stable.
   3. Withdraw and wipe the dipstick clean using a lint free cloth.
   4. Fully insert the dipstick into the dipstick tube with the Min. and Max. marking on the blade upwards (facing towards the engine). Withdraw the dipstick again.
   5. The engine oil level should read between the Min. and Max. marks.
   6. Put the dipstick back into the dipstick tube.
   7. If required, remove the engine oil filler cap and top up the engine oil with the recommended engine oil.
      Approximately one and a half litres are required to bring the oil level from Min. to Max.
   8. Wait for approximately two minutes for the engine oil to settle, then repeat steps 3 to 6 . Add engine oil if required. Do not overfill.
   9. Securely fit the engine oil filler cap.

Engine Oil Level Sensing
Caution: The electronic engine oil level sensing system does not replace the need for the owner to regularly check the engine oil using the dipstick. Check the engine oil level every fourth fuel tank fill or weekly – which ever is the soonest. This vehicle has an electronic engine Oil Level Sensing (OLS) system which records the engine oil level every vehicle start if the vehicle has been left for 4 or more hours, if the vehicle is on level ground, and if it is within a pre-set oil temperature range.

Caution
Running the engine with engine oil below the minimum mark on the dipstick can cause serious engine damage.
The system may not record an oil level if the engine oil temperature is low.

If the engine oil level is approaching the minimum mark the message OIL LEVEL WARNING CHECK AND TOP UP will show in the message centre along with an amber warning triangle and a chime sound. A code will also be stored in the engine management system. The engine oil level is low and should be checked and filled to the required level engine oil as soon as possible. The message will clear when the oil level is filled with a least 1 litre to the required level and the OLS system has performed a valid check of the oil level.

Engine Coolant Level

Warning
Do not remove the filler cap until the coolant system has cooled. Scalding can be caused by escaping steam or coolant.
Use a cloth or glove to protect hands and protect face and arms adequately.

1. Remove the reservoir cap to check the coolant level. The correct coolant level is to the top of the reservoir tank.
2. Make sure that the reservoir cap is secure after topping up.

Caution
Do not over tighten the reservoir cap. This can cause damage to the reservoir cap or the thread for the reservoir tank.

Brake Fluid Level

Warning
Do not drive the vehicle if the brake fluid level is below the minimum mark.

Caution
Make sure that the brake fluid does not contact the paint work during the topping up operation. Serious paint work damage can result. If a spillage does occur, immediately flush any brake fluid from the paint work with clean, fresh water and then wipe with a clean damp cloth.

The brake fluid level should read between the Min. and Max. marks.

1. Remove the reservoir cap. Top up to the Max. level.
2. Install the reservoir cap securely.

Fluid Specifications

Fuel
Minimum 95 RON unleaded fuel.
Recommended 98 RON Super unleaded for optimum performance.

Engine Oil

Caution
To achieve the required high performance of synthetic lubricants, do not mix with mineral oils.

A fully synthetic 0W-40 oil meeting the specifications detailed below can be used. No other viscosity grades or specifications are acceptable.

Engine Coolant
Contact your Aston Martin Dealer for information on engine coolant.

Brake Fluid
DOT 4

Air Conditioning Refrigerant

Caution
Refrigerant gas types must not be mixed. If you do, the air conditioning system can be damaged. If in doubt, consult your Aston Martin Dealer.
HFC134A / HFO-1234yf1

Capacities

1. Fuel Tank (Max/Usable)                                                                 73/70 Litres
2. Engine Oil (including filter)                                                            8.5 Litres
3. Engine Coolant With Automatic Transmission                          18.6 Litres
   (includes transmission cooling)
4. Engine Coolant With Manual Transmission                               15.4 Litres
5. Charge Cooler Coolant                                                                     6.7 Litres
6. Automatic Gearbox (including cooler)                                         8.5 Litres
7. Automatic Transmission Differential                                           1.1 Litres
8. Manual Transmission                                                                      3.2 Litres
9. Screen Washer Reservoir                                                                4.0 Litres

FAQs

Useful Links

Download Manuals: 2021 Aston Martin Vantage User Manual
2021 Aston Martin Vantage Maintenance Schedule