2021 Aston Martin Valkyrie Lighting Controls Guidelines
The amazing hypercar, the 2021 Aston Martin Valkyrie, pushes the limits of automotive engineering and design. One of its many cutting-edge features that fascinates me in particular is its sophisticated lighting settings. These controls perfectly match the Valkyrie’s reputation as a futuristic, high-performance supercar since they combine technology and beauty while also illuminating the road ahead. The lighting controls on the Aston Martin Valkyrie have been painstakingly created to give an unrivaled visual impact while also giving the driver a seamless and intuitive experience. The lighting controls on this hypercar, which was created in partnership with Red Bull Racing, are another example of how Formula 1 technology is combined with the sensibilities of a masterpiece fit for the road.
This introduction will delve into the dynamic and adaptive features, high-performance illumination systems, and beautiful design that distinguish the 2021 Aston Martin Valkyrie from other vehicles in the automotive industry. These controls express the spirit of innovation and perfection that distinguishes the Aston Martin brand in addition to serving a functional purpose. Let’s go on an adventure to learn how the lighting controls on the Valkyrie contribute to its reputation as a representation of technological and automotive brilliance.
Lighting Controls
Exterior Lamps
Exterior lamps are controlled from the infotainment screen. Touch the symbol to select the lamp setting.
- Lamps off1
- Side lamps (including number plate lamps)
- Dipped beam headlamps
- Automatic headlamp mode
Rear foglamp2
Exterior lamps (except the side lamps/parking lamps) switch off automatically if you turn the ignition off.
The lamps will default to Auto whenever the vehicle is unlocked.
- A window will be shown where the driver must confirm the lamps are to be set to off.
- The rear fog lamp will only operate with the headlamps set dipped beam (3) or automatic (4).
Automatic Headlamp Mode
If ambient light fades, headlamps, rear and registration plate lamps will switch on automatically. If ambient light then increases, headlamps, rear and registration plate lamps will automatically go off. Automatic lamps are market specific. The automatic headlamp function features an internal timer that starts when the lamps are turned on. This prevents the lamps from rapidly changing between on and off if situations where ambient light can rapidly change, such as driving between buildings. The headlamps may show a small delay between when a suitable amount of ambient light is detected, and the lamps turning off.
Steering Wheel Lamp Controls
Main Beam
Push the lamp switch (1) up to turn the main beams on. Push the switch up again to return to dipped beam headlamps.
Flash Headlamps
Push the lamp switch down to flash the main beam headlamps.
Direction Indicators
To briefly indicate a change of direction, press the relevant direction indicator button (2). The indicator will flash 3 times. To latch the indicator to stay on press and hold the required indicator button. To cancel indication press the indicator button again or the indicator will cancel on completion of a manoeuvre.
Hazard lamps
The hazard warning lamps will continue to operate if the ignition is switched off.
Press the hazard warning lamp button (A) to set the hazard warning lamps to on. All direction indicator signals will flash. Press the button again to set the hazard warning lamps off.
If you operate a direction indicator from the steering wheel, only the selected direction indicators will operate. Once cancelled, the hazard warning lamps will resume operation.
FAQs
Locate the headlight switch on the dashboard, usually on the left side of the steering wheel, and turn it to the desired position to turn on the headlights.
Different headlamp settings, including low beam, high beam, daytime running lights, and perhaps adaptive lighting, could be available on the Aston Martin Valkyrie.
When the headlights are on, you can often activate the high beam headlights by pushing or dragging the headlight stalk away from or towards you.
You may adjust the headlights’ angles using the headlight leveling control to make sure they are correctly aligned and aren’t blinding other drivers.
Typically, a separate button on the dashboard is used to regulate the fog lights. To switch them on and off, press the button.
Using the infotainment system, you can change the settings or colors of the interior lighting in some automobiles.
The infotainment system settings or the interior lighting control dial can be used to change the brightness of the interior lighting.
Yes, you can usually turn off the automated headlights by putting the headlight control in manual mode.
The hazard light button, which is often a red triangle and is typically found on the center console, is where you typically turn on the hazard lights.
Some automobiles come with ambient lighting that you may adjust using the infotainment system. Look for a menu for illumination control.
The infotainment system’s settings in the car can frequently be used to modify the sensitivity of automated headlights.
If a headlight bulb needs to be replaced, go to the owner’s manual for directions or get help from a professional.
Some automobiles have cornering lights that cast light in the area you’re turning into. For more information, consult the owner’s handbook.
Through the settings menu, you may be able to choose how long the headlights should stay on when you exit some automobiles.
The purpose of the headlight washer system is to wash the headlight lenses. When you utilize the windshield washer system, it frequently turns on. In most cases, this feature is automatic if it is in your car.
Useful Links
Download Manuals: 2021 Aston Martin Valkyrie User Manual
2021 Aston Martin Valkyrie Keys Operation Guide
