BMW 2 SERIES COUPE 2023 Interior equipment

The interior of the 2023 BMW 2 Series Coupe is carefully made and mixes luxury and sportiness in a way that makes driving a truly captivating experience. Inside the cabin, you’ll find a balance of high-quality materials, cutting-edge technology, and well-thought-out design features that make every trip more enjoyable. The 2 Series Coupe is designed with the comfort of the driver and passengers in mind. It has a variety of seating choices, including sport seats for those who want a more exciting driving experience. The high-tech infotainment system with a large tablet that controls entertainment, navigation, and connectivity and gives you access to Apple CarPlay and Android Auto is the centerpiece of the interior. Along with these high-tech features, the 2 Series Coupe has new driver assistance systems that make driving safer and more convenient. Customizable ambient lighting adds a touch of individuality to the car. The 2023 BMW 2 Series Coupe’s interior shows that the brand is committed to making an expensive and immersive place to drive. The attention to detail is clear in every part.

2023 BMW 2 Coupe Specs, Price, Features, Mileage (Brochure)

Vehicle features and options

This chapter describes model-specific equip-ment, systems and functions that are available now and will be available in the future, even if they are not available in the owned vehicle.

Additional information:
Vehicle equipment

Integrated universal remote control

Principle
The integrated universal remote control in the interior mirror can operate remote-controlled systems such as garage door openers, alarm systems or locking systems.

General information
The integrated universal remote control re-places up to three different hand-held trans-mitters. To operate the remote control, the buttons on the interior mirror must be pro-grammed with the desired functions.
Before selling the vehicle, delete the stored functions for the sake of security.
If possible, do not install the antenna of the remote-controlled system near metal objects to ensure the best possible operation.

Safety information 

Warning
The operation of remote-controlled systems with the integrated universal remote control, such as the garage door, may result in injury, for example, body parts becoming jammed in a garage door. There is a risk of injury or risk of damage to property. Make sure that the travel path of the respective system is clear during programming and operation. Also fol-low the safety information for the hand-held transmitter.

Compatibility
If this icon is printed on the packaging or in the operating instructions of the remote-controlled system, the system is generally compatible with the integrated uni-versal remote control.
Additional questions are answered by:

• An authorized service center or another qualified service center or repair shop.
• www.homelink.com on the Internet.

HomeLink is a registered trademark of Gentex Corporation.
An authorized service center or another quali-fied service center or repair shop will be glad to answer additional questions.

Control elements on the interior mirror

• Buttons, arrow 1.
• LED, arrow 2.
• Hand-held transmitter of the remote-con-trolled system, arrow 3.

2023 BMW 2 Coupe Specs, Price, Features, Mileage (Brochure)

Programming the integrated

universal remote control
Functional requirement
The battery of the hand-held transmitter must be fully charged at the time of programming to ensure an optimal range of the integrated universal remote control.

Programming individual buttons

1. Park the vehicle within range of the remote-controlled system.
2. Turn on standby state.
3. Select desired button on the interior mirror:
   • Program available button:
     Press the button.
   • Program already assigned button: Press and hold the button for approx. 20 seconds.
     The LED on the interior mirror will slowly begin flashing orange.
4. Hold the hand-held transmitter for the remote-controlled system approx. 1 to
   12 in/2.5 to 30 cm away from the buttons on the interior mirror.
   The required distance depends on the hand-held transmitter.
5. Press and hold the button on the hand-held transmitter.
   Canada: if programming with the hand-held transmitter was interrupted, hold down the interior mirror button and repeatedly press and release the hand-held transmitter but-ton for 2 seconds.
6. The LED can illuminate in different ways:
   • The LED lights up green: programming completed.
     Release button.
   • The LED flashes green rapidly: the hand-held transmitter was detected but programming is not complete.
     Press and hold the button on the interior mirror for approx. 2 seconds. Perform this procedure three times.
     If the integrated universal remote con-trol remains nonoperational, continue with the special features for rolling code radio systems.
   • LED does not illuminate green after 60 seconds: programming not com-pleted.
     Repeat steps 3 to 5.

Special feature of the rolling code wireless system
For systems with a rolling code radio system, the integrated universal remote control and the system also have to be synchronized.
Refer to information on synchronization in the operating instructions of the remote-controlled system.

1. Program the desired button on the interior mirror.
2. Locate and press the synchronizing button on the remote-controlled system, such as on the garage door.
   You have approx. 30 seconds for the next step.
   Synchronizing is easier with the aid of a second person.
3. Press and hold the programmed button on the interior mirror for approx. 3 seconds. If necessary, repeat this step up to three times in order to end synchronization. Once synchronization is complete, the program-med function will be carried out.

Operation

After programming, the remote-controlled sys-tem can be operated with the button on the interior mirror.

Press and hold the desired button of the re-mote-controlled system within range until the function is triggered.
The LED on the interior mirror is continuously illuminated green during the transmission of the radio signal.

Deleting a button assignment
The button assignment cannot be deleted indi-vidually.
Press and hold the two outer buttons on
the interior mirror simultaneously for approxi-mately 10 seconds until the LED flashes green rapidly.
All stored button assignments will be deleted.

Sun visor

Glare shield
Fold the sun visor down or up.

Glare shield from the side

Folding the sun visor out

1. Fold the sun visor down.
2. Detach it from the holder and swing it to- ward the side window.
3. Shift it back to the desired position.
   Folding the sun visor in
   Proceed in the reverse order to close the sun visor.
   Vanity mirror
   A vanity mirror is located in the sun visor be-hind a cover.

Sockets

Principle
The socket can be used for electronic devi-ces when the standby or drive-ready state is switched on.

General information
The total load of all sockets must not exceed 140 watts at 12 volts.
Do not damage the socket by using unsuitable connectors.

Safety information

Warning
Devices and cables in the unfolding area of the airbags, such as portable navigation de-vices, can hinder the unfolding of the airbag or be thrown around in the car’s interior dur-ing unfolding. There is a risk of injury. Make sure that devices and cables are not in the airbag’s area of unfolding.

NOTICE
Battery chargers that charge the vehicle bat-tery via sockets or cigarette lighters in the vehicle may overload or damage the 12 V electrical system. There is a risk of damage to property, among other potential damage. Only connect battery chargers for the vehicle battery to the jump-start terminals in the en-gine compartment.

NOTICE
If metal objects fall into the socket, they can cause a short circuit. There is a risk of damage to property, among other potential damage. Insert the cigarette lighter or socket cover again after using the socket.

Front center console

1. Press on the cover.
2. A socket is located between the cup hold- ers. Detach the cover.

USB port

General information
Follow the information regarding the connec-tion of mobile devices to the USB port in the section on USB connections.

Additional information:
USB connections, see Owner’s Manual for Navigation, Entertainment, Communication.

In the center armrest

A USB port is located in the center armrest. Properties:

• USB port Type C.
• For charging mobile devices.
• Charge current: max. 3 A.

In the front center console 

NOTICE
Objects in the storage compartment, e.g., large USB connectors, may block or damage the cover when it is being opened or closed. There is a risk of damage to property, among other potential damage. Make sure that the area of movement of the cover is clear while opening and closing it.

Press on the cover.

A USB port is located in the center console.

Properties:

• USB port Type A.
• For charging mobile devices and for data transfer.
• Charge current: max. 1.5 A.

Wireless charging tray

Principle
The wireless charging tray allows wireless charging of mobile phones and other mobile devices certified according to the Qi standard.

General information
When inserting the device to be charged, en-sure that there are no objects between the de-vice to be charged and the wireless charging tray.
The charging process is shown by the charge indicator on the control display.

Safety information

Warning
When charging a device that meets the Qi standard in the wireless charging tray, any metal objects located between the device and the tray can become very hot. Placing storage devices or electronic cards, such as chip cards, cards with magnetic strips or cards for signal transmission, between the device and the tray may impair the card func-tion. There is a risk of injury and risk of dam-age to property. When charging mobile devi-ces, make sure there are no objects between the device and the tray.

Overview

Tray in the center console:

1. LED
2. Storage area

Functional requirements 

• The device to be charged must be certified according to the Qi standard.
• Standby state is switched on.
• The mobile phone must not exceed the maximum size of approximately 6.0 x 3.1 x 0.7 in/154.5 x 80 x 18 mm.
• Use only protective sleeves and covers up to a maximum thickness of 0.07 in/2 mm; otherwise, the charging function may be impaired.
• The mobile phone to be charged is located in the center of the tray. The mobile phone display is pointing upwards.

Inserting the mobile phone

1. Open the tray cover.
2. Place the mobile phone-centered in the tray with the display facing up.
3. Close the tray cover.

LED displays

Color Meaning 

• Blue The mobile phone is charging.
  The blue LED stays illuminated once the inserted mobile phone with Qi capability is fully charged.
• Orange
  The mobile phone is not charging.
  The temperature of the mobile phone may be too high or a foreign object may be in the charging tray.
• Red
  The mobile phone is not charging.
  Contact an authorized service center or another qualified service center or repair shop.

Forgotten warning

General information

A warning can be given if a Qi-certified mobile phone was forgotten in the wireless charging tray when leaving the vehicle.
The forgotten warning is displayed in the instrument cluster.

Activating the forgotten warning function

1. MENU”
2. Vehicle apps”
3. System settings”
4. Wireless charging tray”
5. Mobile phone reminder”

System limits
The charge current may be reduced or the charging process may be temporarily interrupted in the following situations:

• Due to excessive temperatures on the surface of the tray and mobile phone.
• If there are objects between the mobile phone and the wireless charging tray.
• By settings on the mobile phone, for instance for charging. Follow the relevant instructions on the controlled display and in the instructions for the mobile phone, if applicable.

2023 BMW 2 Coupe Specs, Price, Features, Mileage (Brochure)

FAQ