2024 BMW 5 Series Wheels and Tyres User Guide

2024 BMW 5 Series Wheels and Tyres User Guide

As always, the 2024 BMW 5 Series lives up to its image of being both stylish and fast. Its wheels and tyres are a big part of this. With its careful attention to detail, the 5 Series comes with a variety of wheels to suit a wide range of tastes and driving needs. Different types of wheels, from sleek metal wheels to dynamic spoke designs, not only make the car look better but also affect how it handles and performs. The 5 Series also has tyres with cutting-edge technology that make sure they grip, stay stable, and respond quickly on a variety of road surfaces. Whether you’re going in the city or on the highway, the 2024 BMW 5 Series is easy to control thanks to its carefully designed wheels and cutting-edge tyre technology.

2024 BMW 530i Review, Price, Features And Mileage (Brochure)

Wheels and tyres

Vehicle Equipment

This chapter describes equipment, systems and functions which are offered or may be of-fered in future on a model-specific basis, even if they are not included in the vehicle in question.
For further information: For vehicle equipment, see page 8.

Tyre inflation pressure

General
The tyre condition and tyre inflation pressure influence the following:

• Tyre service life.
• Driving safety.
• Driving comfort.
• Fuel consumption.

Safety information

WARNING
A tyre with too little or no tyre inflation pressure can heat up significantly and sustain damage. Handling characteristics, for example, steering and braking will be impaired as a result. There is a risk of an accident. Check the tyre inflation pressure regularly, for example twice a month or before any long journey, and correct as necessary.

Tyre inflation pressure information

On the body pillar
The tyre inflation pressure information is located on the body pillar of the driver’s door.
The tyre inflation pressures apply to all tyre sizes and recommended tyre makes that have been approved by the vehicle manufacturer as suitable for the model version. The list can also include tyre sizes that are only suitable in combination with specific equipment.
Information about approved wheels and tyres for the vehicle can be requested from an authorised Service Partner or another qualified Service Partner or specialist workshop.
The tyre inflation pressure appropriate for the respective load conditions should be used. For partially loaded vehicles, the specified tyre inflation pressure for a partially loaded vehicle, for example, is the optimum tyre inflation pressure.

For Australia/New Zealand

WARNING
The inflation pressures on the tyre label are applicable only for tyre types explicitly mentioned on the label. Tyre inflation pressures that may be covered by the label – by size, speed category and load rating/load index – but not explicitly mentioned on the label may be different. Please obtain adequate inflation pressures by the tyre manufacturer’s specifications from your tyre dealer.

On the control display
The current tyre inflation pressures and the specified tyre inflation pressures for the instal-led tyres can be displayed on the control display.
To ensure that they are displayed correctly, the tyre sizes must be stored in the system and must have been set for the fitted tyres.
The current tyre inflation pressure value is shown on each tyre.
The specified tyre inflation pressure value is located towards the bottom of the control display.

Checking the tyre inflation pressure

General
The tyres heat up while driving. The tyre inflation pressure increases with the temperature of the tyre.
The tyres have a natural, uniform tyre pressure loss.
The pressures displayed by some pressure gauges may be up to 0.1 bar too low.

Checking using tyre inflation pressure information on the body pillar

1. Determine the specified tyre inflation pressures for the tyres installed on the vehicle.
2. Check the tyre inflation pressure in all four tyres, using a pressure gauge, for example.
3. Correct the tyre inflation pressure if the current tyre inflation pressure deviates from the specified tyre inflation pressure.
4. Check that all valve caps are screwed onto the tyre valves.

The tyre inflation pressure information on the tyre pressure label on the body pillar only relates to cold tyres or tyres at the same temperature as the ambient temperature.
Only check the tyre inflation pressures when the tyres are cold, i.e.:

• If the vehicle has been driven a distance of no more than 2 km, 1.25 miles.
• If the vehicle has not moved again for at least 2 hours after a journey.

If equipped with an emergency tyre: check the tyre inflation pressure of the emergency wheel in the luggage compartment regularly and cor-rect it if necessary.

Checking using the tyre inflation pressure information on the control display

1. Apps menu
2. “Vehicle apps”
3. “Vehicle status”
4. “Tyre Pressure Monitor”
5. Check if the current tyre inflation pressures match the specified tyre pressure value.
6. Correct the tyre inflation pressure if the current tyre inflation pressure deviates from the specified tyre inflation pressure.

The current tyre inflation pressure on the con-trol display may be restricted when the vehicle is stationary. The tyre inflation pressure is updated after a short drive.

After adjusting the tyre inflation pressure
If a Tyre Pressure Monitor is equipped, tyre inflation pressure corrections are applied automatically. Make sure that the tyre settings are correct. For tyres not listed in the tyre inflation pressure information on the controlled display, reset the Tyre Pressure Monitor.
If equipped with a Flat Tyre Monitor, reinitialize the Flat Tyre Monitor.

Tyre tread

Safety information

WARNING
If the tyre tread depth is too low, safety may be impaired in critical situations, e.g., aqua-planing or driving on slush. There is a risk of an accident. Note the minimum tyre tread depth of 3 mm, approx. 0.12 in for summer tyres, and 4 mm, approx. 0.16 in for winter and all-season tyres, or follow applicable legal requirements for minimum tread depth.

Minimum tread depth
There are wear indicators from the tyre manufacturer distributed over the tyre circumference with a height of at least 1.6 mm, approx. 0.06 in, which serves as an indicator of tyre tread wear.
The positions of the wear indicators are identified on the tyre sidewall by TWI, Tread Wear Indicator.

Tyre damages

General
Inspect tyres regularly for damage, the presence of foreign bodies and wear.
Symptoms that may indicate tyre damage or a malfunction:

• Unusual vibrations.
• Unusual tyre or running noises.
• Unusual vehicle response, such as pronounced pulling to the left or right.
• Uneven wear pattern, for example, increased wear near the tyre shoulder.

Damage can be caused by situations such as the following:

• Driving over kerbs.
• Road damage.
• Tyre inflation pressure is too low.
• Overloading the vehicle.
• Incorrect tyre storage.

Safety information

WARNING
If the tyres are damaged, the tyre inflation pressure may be reduced, causing you to lose control of the vehicle. There is a risk of an accident. If you suspect tyre damage while you are driving, immediately reduce speed and bring the vehicle to a stop. Have the wheels and tyres checked. To do so, carefully drive to an authorised Service Partner or another qualified Service Partner or a specialist workshop. If necessary, have the vehi-cle towed or transported there. Do not repair damaged tyres. Have them replaced.

WARNING
Driving over kerbs, potholes, or other obstacles can damage the wheels, tyres, and suspension components. Larger wheels have a smaller tyre cross-section. The smaller the tyre cross-section, the higher the risk of tyre damage. There is a risk of accident and material damage. Avoid kerbs, potholes, or other obstacles whenever possible, or drive over them slowly and carefully.

Tyre age

Recommendation
Irrespective of the tyre tread depth, change tyres after 6 years at the latest.

Production date
The production date of the tyre can be found on the tyre sidewall.

Designation	Production Date
DOT … 1923	19th week of 2023

Replacement of wheels and tyres

Fitting and balancing
Have the wheel fitted and balanced by an authorised Service Partner another qualified Service Partner or a specialist workshop.

Suitable wheels and tyres
General
Depending on the vehicle and equipment, only certain wheel/tyre combinations are suitable. The wheel/tyre combinations are determined by the manufacturer of the vehicle based on the following criteria:

• Tyre size; for example, tyre width, and aspect ratio.
• Wheel size; for example rim diameter, offset.

Information on the suitable wheels and tyres for the vehicle, as well as the special equipment, can be obtained from an authorised Service Partner, another qualified Service Partner or a specialist workshop.

Safety information

WARNING
Wheels and tyres that are not suitable for the vehicle can damage parts of the vehicle. There is a risk of an accident. The manufacturer of the vehicle recommends only using wheels and tyres that have been approved as suitable for the vehicle type concerned.

WARNING
Mounted steel wheels can lead to technical problems, for example, wheel bolts may work loose and brake discs may be damaged. There is a risk of an accident. Do not install steel wheels.

WARNING
Wheel and tyre combinations that are unsuitable for the vehicle can impair the vehicle’s driving characteristics and various system functions, for example, the Anti-lock Braking System (ABS) or Dynamic Stability Control. There is a risk of an accident. The manufacturer of the vehicle recommends using wheels and tyres that have been rated as suitable for the vehicle type concerned. After a tyre has been damaged, refit the same wheel/tyre combination as the original.

Recommended makes of tyre

For each vehicle, tyre types are developed that are optimised specifically for the individual requirements of the vehicle. For example:

• Handling.
• Comfort.
• Noise characteristics.

The specially developed tyres are marked with a star on the tyre sidewall. After replacing wheels and tyres, the vehicle manufacturer recommends using tyres with a star marking again. The manufacturer of the vehicle recom-mends that tyres of the same make and tread design are used.

New tyres

Due to the manufacturing process, new tyres do not achieve their full road grip immediately.
Drive moderately for the first 300 km,
200 miles.

Retreaded tyres

WARNING
Retreaded tyres may have different tyre carcasses. Their durability may be restricted due to their advanced age. There is a risk of an accident. The vehicle manufacturer advises against the use of retreaded tyres.

Maximum speed

Safety information

WARNING
If the maximum permitted speed of the fit-ted tyres is exceeded, the tyres may be damaged. There is a risk of an accident. Do not exceed the maximum permitted speed of the tyres.

Speed index
The maximum permitted speed of the tyres is indicated by the speed index.
The speed index can be found in the official tyre designation on the tyre sidewall.

Designation	Maximum speed
Q	up to 160 km/h, 100 mph
R	up to 170 km/h, 106 mph
S	up to 180 km/h, 112 mph
T	up to 190 km/h, 118 mph
H	up to 210 km/h, 131 mph
F	up to 240 km/h, 150 mph
W	up to 270 km/h, 167 mph
Y	up to 300 km/h, 186 mph
(Y)	above 300 km/h, 186 mph

Maximum speed of winter tyres

If the maximum speed of the vehicle is higher than the maximum permissible speed for winter tyres, a sign with the maximum permissible speed must be displayed in the field of view. The sign is available from an authorised service partner another qualified Service Partner or a specialist workshop.

Winter tyres

General
Winter tyres are recommended if driving in winter conditions.
“The winter tyres are identified on the tyre sidewall by an icon with mountain and snowflake, as well as by the lettering M+S.
So-called all-season tyres with M+S marking but without icons with mountains and snowflakes have better winter properties than summer tyres. As a rule, all-season tyres do not achieve the performance of winter tyres.

Wheel change between axles

WARNING
Wheel changes between axles on vehicles with different tyre sizes or rims on the front and rear may cause tyre damage and damage to the vehicle. There is a risk of an accident. Do not swap wheels between axles on vehicles with different tyre sizes or rims on the front and rear.

Depending on the individual operating condi-tions, the tyre tread wears differently on the front and rear axles. To achieve even abrasion, the tyres can be swapped in pairs between the axles. Additional information is available from an authorised Service Partner another qualified Service Partner or a specialist workshop. After changing the wheels, check the tyre inflation pressure and correct it if necessary.

Storing tyres

Tyre inflation pressure
Do not exceed the maximum tyre inflation pressure indicated on the tyre sidewall.

Storage

• Store wheels and tyres in a cool, dry and dark place when not in use.
• Protect the tyres against contamination from oil, grease and solvents.
• Do not leave tyres in plastic bags.
• Remove dirt from the wheels or tyres.

Remedying a flat tyre

Safety measures

• Park the vehicle on firm and non-slip ground at a safe distance from traffic.
• Switch on the hazard warning lights.
• Apply the parking brake.
• Engage the steering wheel lock with the wheels in the straight-ahead position.
• As soon as the traffic flow permits, have all vehicle occupants get out of the vehicle and guide them out of the danger area, for example behind the crash barrier.
• If necessary, set up the hazard triangle or hazard warning lamp at an appropriate distance.

Tyre repair kit

Principle
With the tyre repair kit, minor tyre damage can be quickly sealed to allow the driver to continue driving.

General

• The filled-in tyre sealant encloses the damage from the inside when it hardens.
• Please observe the notes on using the tyre repair kit which is on the compressor and the tyre sealant bottle.
• The use of the tyre repair set can be effective in the event of tyre damage from a size of approx. 4 mm, approx. 0.16 in.
• Foreign bodies that have penetrated the tyre should remain inside the tyre. Only remove foreign objects if they are visibly protruding from the tyre.
• The compressor can be used to check the tyre inflation pressure.

Overview

Storage
Depending on the equipment, storage for the tyre repair set is provided as follows:

• In the luggage compartment under the luggage compartment floor.
• In the luggage compartment on the left or right side.
• In the luggage compartment behind a side trim panel.

Tyre sealant bottle and filler hose

1. Tyre sealant bottle
2. Tyre sealant bottle outlet
3. Filler hose
4. Tyre sealant bottle connection
5. Wheel valve connection

Compressor

1. Compressor
2. Tyre inflation pressure indicator
3. Pressure-reducing valve button
4. Tyre sealant bottle holder
5. Connector for socket
6. On/off switch

Safety measures

• Park the vehicle on a firm surface and as far away from moving traffic as possible.
• Switch on the hazard warning lights.
• Apply the parking brake.
• Engage the steering wheel lock with the wheels in the straight-ahead position.
• As soon as the traffic flow permits, have all vehicle occupants get out of the vehicle and guide them out of the danger area, for example behind the crash barrier.
• If necessary, set up the hazard triangle or hazard warning lamp at an appropriate distance.
• Remove the warning sign for the maximum permissible speed from the compressor and attach it to the visible area in the vehi-cle interior.
• Remove the warning sign from the tyre sealant bottle and stick it on the wheel rim.

2024 BMW 530i Review, Price, Features And Mileage (Brochure)

Preparing the tyre repair kit

1. Insert the tyre sealant bottle into the mount on the housing of the compressor.
   
2. Turn the tyre sealant bottle clockwise by 90° to the stop.
   
3. Connect the filler hose to the outlet of the tyre sealant bottle and turn clockwise by 90° to the stop.
   
4. Unscrew the valve cap from the wheel and screw the connecting piece of the filler hose onto the valve.
   
5. With the compressor switched off, insert the plug into the socket inside the vehicle interior.

Filling with tyre sealant

Safety information

DANGER
A blocked exhaust pipe or inadequate ventilation can allow harmful exhaust fumes to enter the vehicle. The exhaust fumes contain pollutants which are colourless and odourless. In enclosed spaces, exhaust fumes can also build up outside the vehicle. There is a danger to life. Keep the exhaust pipe clear and ensure sufficient ventilation.

NOTICE
The compressor can overheat if operated for too long. There is a risk of material damage. Do not let the compressor run for longer than 10 minutes.

Filling with tyre sealant

1. Switch on the compressor with standby state or drive-ready state switched on.
   Let the compressor run for max. 10 minutes to fill in the tyre sealant and reach a tyre inflation pressure of 2.5 bar.
   While the tyre is being filled with tyre sealant, the tyre pressure can briefly reach approx. 6 bar. Do not turn off the compressor in this phase.
   
2. Switch off compressor.

Checking the tyre inflation pressure
Read the tyre pressure on the tyre inflation pressure indicator of the compressor. The tyre pressure must be at least 2.5 bar.

Tyre pressure too high
If the tyre inflation pressure is too high, reduce the tyre pressure with the pressure-reducing valve on the compressor.

Minimum tyre inflation pressure is not reached
Do not continue driving unless a minimum tyre pressure of 2.5 bar is reached. Contact an authorised Service Partner another qualified Service Partner or a specialist workshop.

Minimum tyre inflation pressure is reached

1. Pull the connector out of the socket in the vehicle interior.
2. Disconnect the hose from the tyre sealant bottle and the valve on the wheel.
3. Screw the valve cap onto the valve.
4. Stow the tyre repair kit in the luggage compartment.
5. Immediately drive for approximately
   10 km/5 miles to evenly distribute the tyre sealant in the tyre.
   Do not exceed the permitted maximum speed of 80 km/h, approx. 50 mph.
   If possible, do not drive slower than
   20 km/h/12 mph.
   Tyre sealant may spray from the damaged area during the initial wheel rotations.

Adjusting the tyre pressure

1. Stop in a suitable area.
2. Connect the hose directly to the compressor and turn clockwise by 90° until it audibly engages.
   
3. Unscrew the valve cap from the wheel and screw the connecting piece of the hose onto the valve.
   
4. Insert the connector into the socket in the vehicle interior.
5. Read the tyre pressure on the tyre inflation pressure indicator of the compressor.
   Do not continue driving unless a minimum tyre pressure of 1.3 bar is displayed. Contact an authorised Service Partner another qualified Service Partner or a specialist workshop.
6. Correct the tyre pressure to 2.5 bar.
   1. Increase tyre inflation pressure: with standby or drive-ready state turned on, turn on the compressor and let it run for a maximum of 10 minutes.
   2. Reduce tyre inflation pressure: press the pressure-reducing valve button on the compressor.

Removing and stowing the tyre repair kit

1. Switch off compressor.
2. Pull the connector out of the socket in the vehicle interior.
3. Disconnect the hose from the compressor and the valve on the wheel.
4. Screw the valve cap onto the valve.
5. Stow the tyre repair kit in the luggage compartment.

Resuming a journey
Do not exceed the permitted maximum speed of 80 km/h, approx. 50 mph.
Do not exceed a maximum distance travelled of 200 km/125 miles.
Re-initialise the flat tyre monitor or reset the Tyre Pressure Monitor.
Have the punctured tyre and the tyre sealant bottle of the tyre repair kit replaced as soon as possible?

For further information:

• Flat Tyre Monitor, see page 364.
• Tyre Pressure Monitor, see page 358.

System limits
Contact an authorised Service Partner another qualified Service Partner or a specialist workshop if you are unable to put the tyre back in operation.
With Tyre Pressure Monitor: using sealant can damage the air pressure sensor. In this case, have the electronics replaced at the next opportunity?

Snow chains

Safety information

WARNING
If snow chains are fitted to unsuitable tyres, the snow chains can come into contact with parts of the vehicle. There is a risk of accident or material damage. Only fit snow chains on tyres which have been approved by the man-ufacturer as being suitable for snow chains.

WARNING
Insufficiently tensioned snow chains can damage tyres and vehicle components. There is a risk of accident or material damage. Ensure that snow chains are always adequately tensioned. Re-tension them if necessary per the snow chain manufacturer’s instructions.

Fine-link snow chains
The vehicle manufacturer recommends using fine-link snow chains. Certain fine-link snow chains have been tested, found safe for use in traffic and rated as suitable by the manufacturer of the vehicle.
Information regarding suitable snow chains is available from an authorised Service Partner another qualified Service Partner or a specialist workshop.

Use
Use only in pairs on the rear wheels, equipped with the tyres of the following wheel/tyre sizes:

Tyre size	Wheel size	Rim offset (IS)
225/55 R18	7.5J x 18	23
245/45 R19	8.5J x 19	29

The information on wheel size and rim offset is located on the inside of the wheel.
The list can also include wheel/tyre sizes that are only suitable for certain models.
Information about approved wheels and tyres for the vehicle can be requested from an authorised Service Partner or another qualified Service Partner or specialist workshop.
Observe the snow chain manufacturer’s instructions.
If equipped with a Tyre Pressure Monitor: do not reset the Tyre Pressure Monitor when using snow chains. Otherwise, incorrect values may be displayed.
If equipped with a flat tyre monitor: do not initialize the flat tyre monitor when using snow chains. Otherwise, incorrect values may be displayed.
When driving with snow chains, activate the drive-off support to optimise propulsion, if necessary.

Maximum speed with snow chains
When snow chains are fitted, do not exceed 50 km/h, 30 mph.

FAQs

Useful Links

View Full PDF: 2024 BMW 5 Series User Manual | Auto User Guide

2024 BMW 530i Review, Price, Features And Mileage (Brochure)

2024 BMW 5 Series Specifications And Features Guide