BYD DOLPHIN Fuses and Fuse Box Diagram User Guide
The BYD Dolphin’s fuse box and fuses guard against overcurrent damage to the car’s electrical components. They are found in easily accessible locations and regulate circuits such as power accessories, audio, and lighting. System performance and safety are guaranteed by routine inspections.
2023 BYD HAN EV Review, Price, Features and Mileage (Brochure)
Video: BYD DOLPHIN Fuses
BYD Fuses Guide
All vehicle circuits are provided with fuses to prevent short circuit or overloading. These fuses are mounted in the under-hood and dashboard PDBs, respectively, which include fuse labels showing the correspondence of fuses with electrical components.
- The fuses under the hood are located at the left rear part in the engine compartment. To open it, remove the trim first, and press the latch.
- The dashboard fuse under the driver’s side is located on the left side of the dashboard. Take apart the lower body of the dashboard to check the fuse.
- Replacement of blown fuses with ones of higher amperage can significantly increase the likelihood of damage to the electrical system.
- If there is no spare fuse of the same amperage, use a fuse with lower amperage instead.
REMINDER
- Do not use fuses with amperage higher than the rated ampere value or any other solution to replace the fuses, as this can cause serious damage or even a fire.
- If a fuse blows, it is recommended to check or replace the fuse at a BYD authorized dealer or service provider.
Engine Compartment Fuse Box
Passenger Compartment Fuse Box
How to Replace the Fuses of the BYD DOLPHIN
To replace the fuses in your BYD Dolphin (2021–2023), follow these steps to ensure safety and proper functionality:
Materials:
- The new fuse of the correct amperage.
- Fuse puller or needle-nose pliers.
Steps to Replace the Fuse:
-
Turn Off the Vehicle: Ensure the vehicle is completely powered down to avoid electrical hazards.
-
Access the Fuse Box: Open the appropriate fuse box cover.
-
Identify the Blown Fuse: Use the diagram on the fuse box cover to locate the specific fuse.
-
Remove the Faulty Fuse: Use a fuse puller or a pair of needle-nose pliers to gently extract the blown fuse.
-
Inspect the Fuse: Check if the metal strip inside the fuse is broken, indicating it has blown.
-
Replace with Correct Fuse: Insert a new fuse of the same amperage rating into the slot.
-
Test the System: Turn on the vehicle and check if the component powered by the fuse is functioning properly.
Tips:
- Always use a fuse with the correct amperage rating to prevent electrical issues or damage to the vehicle.
Useful Links:
2023 BYD HAN EV Review, Price, Features and Mileage (Brochure)
BYD DOLPHIN Starting and Driving User Guide
BYD DOLPHIN Specifications User Guide