Pioneer FH-S722BS Double DIN Audio CD Receiver User Guide

Pioneer FH-S722BS Double DIN Audio CD Receiver

The Pioneer FH-S722BS Double DIN CD Receiver will improve your in-car music experience with its integrated Bluetooth, improved audio controls, and SiriusXM compatibility for limitless music streaming.

Getting Started for Audio CD Receiver

Basic operation

• FH-S720RS/S722RS
• FH-S520BT/S52BT
• MVH-S620BS/S622BS
• MVH-S420BT

Optional remote control

The remote control CD-R510 is sold separately.

Resetting the microprocessor

The microprocessor must be reset in the following situations:

• Before using this unit for the first time after installation
• If the unit fails to operate properly
• When strange or incorrect messages appear on the display

Setup menu

When you turn the ignition switch to ON after installation, the setup menu appears in the display.

WARNING
(Only for FH-S720BS/S722BS/MVH-S620BS/S622BS)
Do not use the unit in standard mode when a speaker system for network mode is connected to the unit. Do not use the unit in network mode when a speaker system for standard mode is connected to the unit. This may cause damage to the speakers.

Cancelling the demonstration display (DEMO OFF)

1. Press the M.C. dial to display the main menu.
2. Turn the M.C. dial to select [SYSTEM], then press to confirm.
3. Turn the M.C. dial to select [DEMO OFF], then press to confirm.
4. Turn the M.C. dial to select [YES], then press to confirm.

INITIAL settings

1. Press and hold SRC/OFF until the unit turns off.
2. Press the M.C. dial to display the main menu.
3. Turn the M.C. dial to select [INITIAL], then press to confirm.
4. Turn the M.C. dial to select an option, then press to confirm.

Pioneer FH-S722BS Operations

You can make adjustments in the FUNCTION settings (page 30) (except for AUX IN/CD/ USB source).
Note that the following operations do not work for an AUX device. To operate an AUX device, use the device itself.

About MIXTRAX (USB/iPhone only)

The MIXTRAX function creates a non-stop mix of your music library, accompanied by illumination effects. For details on MIXTRAX settings, see page 39.

NOTES

• iPhone needs to be connected with Pioneer Smart Sync via USB to use this function (page 25).
• Depending on the file/song, sound effects may not be available.
• Turn the MIXTRAX function off if the illumination effects it produces interfere with driving.

Bluetooth audio

Important

• Depending on the Bluetooth audio player connected to this unit, the available operations will be limited to the following two levels:
  • A2DP (Advanced Audio Distribution Profile) can only play back songs on your audio player.
  • AVRCP (Audio/Video Remote Control Profile) can perform functions such as playback, pause, select songs, etc.
• The sound of the Bluetooth audio player will be muted when the phone is in use.
• When the Bluetooth audio player is in use, you cannot connect to a Bluetooth telephone automatically.
• Depending on the type of Bluetooth audio player you have connected to this unit, operation and information displayed may vary based on availability and functionality.

1. Make a Bluetooth connection with the Bluetooth audio player.
2. Press SRC/OFF to select [BT AUDIO] as the source.
3. Press BAND/S to start playback.

NOTE
You must reconnect the Bluetooth connection when the source is switched or the unit is turned off.
TIP
When more than two and up to five devices are registered to the unit via Bluetooth, you can switch the Bluetooth device by playing back songs on the device. By doing so, playing back a song from the Bluetooth device of each passenger is easily available. However, depending on the usage conditions, multiple connections may not be available and the audio files/songs may not be able to be played back properly.

Listening to Pandora

Update the firmware of the Pandora application to the latest version before use.

1. Connect this unit with the mobile device.
   1. iPhone via USB (page 12)
   2. iPhone/Android device via Bluetooth (page 14)
2. Press SRC/OFF to select [PANDORA].
3. Press and hold 1/ ^ to display [APP CONTROL).
4. Turn the M.C. dial to select one of the below.
   1. Select [WIRED] for the USB connection.
   2. Select [BLUETOOTH] for the Bluetooth connection.
5. Press SRC/OFF to select [PANDORA].
6. Launch the Pandora application on the mobile device and start playback.

NOTE
When you connect a mobile device other than an iPhone/Android device, it may not operate correctly depending on your mobile device.

Using Pioneer Smart Sync/APP

Pioneer Smart Sync is an application that intelligently brings your maps, messages, and music together in the vehicle. You can operate the unit from Pioneer Smart Sync installed on an iPhone/Android device. In some cases, you can control aspects of the application, such as source selection, pause, etc., by using the unit.
For details on what operations are available on the application, see the application’s help section.

NOTE
The APP source is not available when a Pioneer Smart Sync connection is not made or [USB MTP] is set to [ON] in the SYSTEM settings (page 36).

WARNING

Do not attempt to operate the application while driving. Make sure to pull off the road and park your vehicle in a safe location before attempting to use the controls on the application.

For iPhone users
This function is compatible with iOS 10.3 or later. You can download Pioneer Smart Sync on the iTunes App Store.

FAQs of Pioneer FH-S722BS