2023 FORD Ranger User Manual

Here’s a look at the 2023 FORD Ranger: The Ranger has a long history of being a reliable companion for work and play. It is a symbol of rugged flexibility and unwavering ability. The 2023 Ranger is a great example of Ford’s approach to making trucks that can handle any terrain. It has a strong presence and a design that is both strong and elegant. The Ranger can easily meet the needs of modern lives because it has modern technology, new features, and a range of powerful engines. This midsize pickup changes what it means to be adventurous by combining comfort, speed, and durability in a way that works well on both off-road trails and city streets. The 2023 FORD Ranger asks you to go on trips where exploration has no limits. This means that every drive is an opportunity to learn more about the world and about yourself.

Starting and Stopping the Engine

GENERAL INFORMATION
WARNING: Extended idling at high engine speeds can produce very high temperatures in the engine and exhaust system, creating the risk of fire or other damage.
WARNING: Do not park, idle or drive your vehicle on dry grass or other dry ground cover. The emission system heats up the engine compartment and exhaust system, creating the risk of fire.
WARNING: Do not start the engine in a closed garage or in other enclosed areas. Exhaust fumes can be toxic. Always open the garage door before you start the engine.
WARNING: Exhaust leaks may result in entry of harmful and potentially lethal fumes into the passenger compartment. If you smell exhaust fumes inside your vehicle, have your vehicle inspected immediately. Do not drive if you smell exhaust fumes.
WARNING: Switching off the engine when your vehicle is still moving results in a significant decrease in braking assistance. Higher effort is required to apply the brakes and to stop your vehicle. A significant decrease in steering assistance could also occur. The steering does not lock, but higher effort could be required to steer your vehicle. When you switch the ignition off, some electrical circuits, for example airbags, also turn off. If you unintentionally switch the ignition off, shift into neutral (N) and restart the engine.

If you disconnect the battery, your vehicle may exhibit some unusual driving characteristics for approximately 5 mi
(8 km) after you reconnect it. This is because the engine management system must realign itself with the engine. You can disregard any unusual driving characteristics during this period.
The powertrain control system meets all Canadian interference-causing equipment standard requirements regulating the impulse electrical field or radio noise.
When you start the engine, avoid pressing the accelerator pedal before and during operation. Only use the accelerator pedal when you have difficulty starting the engine.

IGNITION SWITCH (IF EQUIPPED) 

Note: Make sure the key is clean before inserting it into any lock cylinder.
Note: Do not leave the key in the ignition for an extended period of time when the engine is not running. This is to prevent the vehicle battery from losing charge.

Switching the Ignition Off
Turn the key to position 0.

Switching the Ignition to Accessory Mode
Turn the key to position I. Electrical accessories, for example the radio, operate without the engine running.

Switching the Ignition On
Turn the key to position II. All electrical circuits and accessories are operational and the warning lamps and indicators illuminate.

Starting the Engine
Turn the key to position III. Release the key when the engine starts.

KEYLESS STARTING (IF EQUIPPED)
Note: The system may not function if the intelligent access key is close to metal objects or electronic devices, for example keys or a cell phone.
Note: A valid intelligent access key must be located inside your vehicle to switch the ignition on and start your vehicle.

Ignition Modes
The keyless starting system has three modes:
Off: Turns the ignition off.
Without applying the brake pedal, press and release the button once when the ignition is in the on mode, or when your vehicle is running but is not moving.
On: All electrical circuits are operational and the warning lamps and indicators illuminate.
Without applying the brake pedal, press and release the button once.
Start: Starts your vehicle. The engine may not start when your vehicle starts.
Press the brake pedal, and then press the button for any length of time. An indicator light on the button illuminates when the ignition is on and when your vehicle starts.

STARTING A GASOLINE ENGINE
When you start the engine, the idle speed increases. This helps to warm up the engine. If the engine idle speed does not slow down automatically, have your vehicle checked by an authorized dealer.

Note: You can crank the engine for a total of 60 seconds without the engine starting before the starting system temporarily disables. The 60 seconds does not have to be all at once. For example, if you crank the engine three times for 20 seconds each time, without the engine starting, you reached the 60-second time limit. A message appears in the information display alerting you that you exceeded the cranking time. You cannot attempt to start the engine for at least 15 minutes. After 15 minutes, you are limited to a 15-second engine cranking time. You need to wait 60 minutes before you can crank the engine for 60 seconds again.
Before starting your vehicle, check the following:

• Make sure all occupants have fastened their seatbelt.
• Make sure the headlamps and electrical accessories are off.
• Make sure the parking brake is on.
• Make sure the transmission is in park (P).
• Switch the ignition on.

Vehicles with an Ignition Key
Note: Do not touch the accelerator pedal.

1. Fully depress the brake pedal.
2. Turn the key to the start position to start the engine.
   Note: The engine may continue cranking for up to 15 seconds or until it starts.
   Note: If you cannot start the engine on the first try, wait for a short period and try again.

Vehicles with Keyless Start
Note: Do not touch the accelerator pedal.
Note: You must have your intelligent access key in your vehicle in order to shift the transmission out of park (P).

1. Fully depress the brake pedal.
2. Press the push button ignition switch.
   The system does not function if:

    

   • The passive key frequencies are jammed.
   • The key battery has no charge.

If you are unable to start your vehicle, do the following:

1. Open the floor console storage compartment lid.
2. Insert the passive key into the backup slot.
3. With the key in this position, press the brake pedal then press the push button ignition switch to switch the ignition on and start your vehicle.

Fast Restart
The fast restart feature allows you to restart your vehicle within 20 seconds of switching it off, even if it does not detect a valid passive key. After 20 seconds, you can no longer start your vehicle if it does not detect a valid passive key. Within 20 seconds of switching the engine off, press the brake pedal and press the push button ignition switch.
Once your vehicle starts, it remains running until you press the push button ignition switch, even if your vehicle does not detect a valid passive key. If you open and close a door while your vehicle is running, the system searches for a valid passive key. You cannot start your vehicle if the system does not detect a valid passive key within 20 seconds

Unique Driving Characteristics

AUTO-START-STOP (IF EQUIPPED)
The system helps reduce fuel consumption by automatically shutting off and restarting the engine while your vehicle is stopped. The engine will restart automatically when you release the brake pedal. In some situations, your vehicle may restart automatically, for example:

• To maintain interior comfort
• To recharge the battery
  Note: Power assist steering is turned off when the engine is off.

WARNING: Apply the parking brake, shift into park (P), switch the ignition off and remove the key before you leave your vehicle. Failure to follow this instruction could result in personal injury or death.
WARNING: Apply the parking brake, shift into park (P), switch the ignition off and remove the key before you open the hood or have any service or repair work completed. If you do not switch the ignition off, the engine could restart at any time. Failure to follow this instruction could result in personal injury or death.
WARNING: The system may require the engine to automatically restart when the auto-start-stop indicator illuminates green or flashes amber. Failure to follow this instruction could result in personal injury.
The Auto-Start-Stop system status is available at a glance within the information display. See Information Displays (page 96).

Enabling Auto-Start-Stop
The system is automatically enabled every time you start your vehicle if the following conditions are met:

• The Auto-Start-Stop button is not pressed (not illuminated).
• Your vehicle exceeds an initial speed of 3 mph (5 km/h) after you have initially started the vehicle.
• Your vehicle is stopped.
• Your foot is on the brake pedal.
• The transmission is in drive (D).
• The driver’s door is closed.
• There is adequate brake vacuum.
• The interior compartment has been cooled or warmed to an acceptable level.
• The front windshield defroster is off.
• The steering wheel is not turned rapidly or is not at a sharp angle.
•  The vehicle is not on a steep road grade.
• The battery is within optimal operating conditions (battery state of charge and temperature in range).
• The engine coolant is at operating temperature.
• Elevation is below approximately 12,000 ft (3,650 m).

Automatic Engine Restart
Any of the following conditions will result in an automatic restart of the engine:

• Your foot is removed from the brake pedal.
• You press the accelerator pedal.
• You press the accelerator and th
• brake pedal at the same time.
• The driver safety belt becomes unfastened or the driver door is ajar.
• The transmission is moved into reverse (R).
• Your vehicle is moving.
• The battery is not within optimal operating conditions.
• The maximum engine off time is exceeded.
• When you press the Auto-Start-Stop button while the engine is stopped automatically.
• The heated windshield is turned on.
  Any of the following conditions may result in an automatic restart of the engine:
• The blower fan speed is increased or the climate control temperature is changed.
• An electrical accessory is turned on or plugged in.

Disabling Auto-Start-Stop
Press the Auto-Start-Stop button located on the center console to switch the system off.
The button will illuminate. The system will only be deactivated for the current ignition cycle. Press the button again to restore the Auto-Start-Stop function.
If your vehicle is in an Auto-Start-Stop state and you shift the transmission to reverse without pressing the brake, a message telling you to press the brake appears. You must press the brake pedal within 60 seconds, or you will need to shift to park and manually restart your vehicle.
Note: If the Shift to P, Restart Engine message appears and the amber
The auto-Start-Stop indicator light is flashing, automatic restart is not available. The vehicle must be restarted manually. See Information Displays (page 96).

FAQ