2024 Kia Telluride All-Wheel Drive User Guide

2024 Kia Telluride All-Wheel Drive User Guide

Kia will release the newest version of its popular Telluride SUV in 2024. It will have All-Wheel Drive (AWD) technology, which will make it even better on and off the road. The Telluride is known for its luxury, versatility, and performance. The AWD system improves traction and stability in a variety of driving conditions, so you can feel safe driving it on city streets or rough terrain. The 2024 Kia Telluride AWD continues to change the SUV market with its unique look, roomy cabin, and high-tech features. It gives drivers and passengers an unmatched driving experience.

2024 KIA Telluride Specs, Price, Features, Mileage And Review

All Wheel Drive (AWD) system (if equipped)

The All Wheel Drive (AWD) system delivers engine power to the front and rear wheels for maximum traction.
AWD is useful when extra traction is required, such as when driving slippery, muddy, wet, or snow-covered roads.
If the system determines there is a need for four-wheel drive, the engine’s driving power will be distributed to all four wheels automatically.

WARNING
If the AWD warning light ( ) stays on the instrument cluster, your vehicle may have a malfunction with the AWD sys-tem. When the AWD warning light ( ) appears, have your vehicle checked by an authorized Kia dealer as soon as possible.

WARNING
To reduce the risk of SERIOUS INJURY or DEATH:

• Do not drive in conditions that exceed the vehicle’s intended design such as challenging off-road conditions.
• Avoid high speeds when cornering or turning.
• Do not make quick steering wheel movements, such as sharp lane changes or fast, sharp turns.
• The risk of a rollover is greatly increased if you lose control of your vehicle at highway speeds.
• Loss of control often occurs if two or more wheels drop off the roadway and the driver oversteers to reenter the roadway.
• In the event your vehicle leaves the roadway, do not steer sharply. Instead, slow down before pulling back into the travel lanes.

AWD (AWD/SNOW MODE)

AWD helps the vehicle’s performance by controlling 4 wheels.

Switching from/to SNOW MODE
You can switch from DRIVE MODE to SNOW mode by turning the knob.

NOTICE
Even if you turn off the vehicle in SNOW mode, DRIVE mode will be set when you restart the vehicle.

AWD transfer mode selection

Transfer mode	Selection mode		Description
AWD AUTO	–		AWD AUTO is used when driving on roads in normal conditions, roads in urban areas, and on highways. All wheels are in operation when a vehicle travels at a constant speed. Required tractions applied on front and rear wheels vary depend- ing on road and driving conditions, which will be automatically controlled by the computing system. When the cluster’s AWD display mode is selected, the cluster displays the status of how the four wheels’ traction forces are distributed.
SNOW			SNOW mode is used to appropriately distribute the vehicle’s traction forces and help prevent wheel slippage when driving on snowy or slippery roads.
AWD LOCK			The main goal of AWD Lock mode is to allow a driver to maximize the vehicle’s traction under extreme driving conditions such as unpaved off-road, sandy roads, and muddy roads. AWD Lock mode is in operation only when a vehicle travels at 25 mph (40 km/h) or less. When travelling at 25 mph (40 km/h) or faster, the mode will switch to AWD Auto. When travelling at 20 mph (30 km/h) or less, the mode will switch back to AWD Lock. Press the AWD Lock mode switch again to switch back to AWD Auto.

When the AWD LOCK mode is deactivated, a shock may be felt as the drive power is delivered entirely to the front wheels. This shock is not a mechanical failure.

NOTICE

Normal road conditions

• Maintain AWD Auto mode when driv-ing on roads in normal conditions.
• When driving under normal road conditions (especially when cornering) in AWD Lock mode, a driver may find minor mechanical vibration or noise, which is an extremely normal phenomenon, not a malfunction. When AWD Lock mode is released, such noise or vibration will be immediately gone.

For safe All Wheel Drive (AWD) operation

WARNING

All Wheel Drive
The conditions of on-road or off-road that demand All Wheel Drive mean all functions of your vehicle are exposed to more extreme stress than under normal road conditions. Slow down and be ready for changes in the composition and traction of the surface under your tyres. If you have any doubt about the safety of the conditions you are facing, stop and consider the best way to proceed.

• Do not try to drive in deep-standing water or mud since such conditions can stall your engine and clog your exhaust pipes. Do not drive down steep hills since it requires extreme skill to maintain control of the vehicle.
  
  
• When you are driving up or down hills drive as straight as possible. Use extreme caution in going up or down steep hills, since you may flip your vehicle over depending on the grade, terrain and water/mud conditions.
  
  

WARNING

Hills
Driving across the contour of steep hills can be extremely dangerous. This dan-ger can come from slight changes in the wheel angle which can destabilize the vehicle or, even if the vehicle is maintaining stability under power, it can lose that stability if the vehicle stops its forward motion. Your vehicle may roll over without warning and without time for you to correct a mistake that could cause serious injury or death.

• You must learn how to corner in an AWD vehicle Do not rely on your experience in conventional FWD vehicles when cornering the vehicle in AWD mode. For starters, you must drive slower in AWD.

WARNING

All Wheel Drive (AWD)
Reduce speed when you turn corners. The centre of gravity of AWD vehicles is higher than that of conventional FWD vehicles, making them more likely to roll over when you turn corners too fast.

WARNING

Steering wheel
Do not grab the inside of the steering wheel when you are driving on unpaved roads. You may hurt your arm by a sudden steering manoeuvre or from a steering wheel rebound due to impact with objects on the ground. You could lose control of the steering wheel.

• Always hold the steering wheel firmly when you are driving on unpaved roads.
• Make sure all passengers are wearing seat belts.

WARNING

Wind danger
If you are driving in heavy wind, the vehicle’s higher centre of gravity decreases your steering control capacity and requires you to drive more slowly.

• If you need to drive in water, stop your vehicle, set your transfer to the AWD LOCK mode and drive at less than 5 mph (8 km/h).

WARNING

Driving through water
Drive slowly. If you are driving too fast in water, the water can get into the engine compartment and wet the ignition sys-tem, causing your vehicle to suddenly stop. If this happens and your vehicle is in a tilted position, your vehicle may roll over.

NOTICE

• Do not drive in water if the level is higher than the bottom of the vehicle.
• Check your brake condition once you are out of mud or water. Press the brake pedal several times as you move slowly until you feel normal braking forces return.
• Shorten your scheduled maintenance interval if you drive in offroad condi-tions such as sand, mud or water
  (refer to “Maintenance Under Severe Usage Conditions” on pages 8-12). Always wash your vehicle thoroughly after off-road use, especially cleaning the bottom of the vehicle.
• Since the driving torque is always applied to the 4 wheels the performance of the AWD vehicle is greatly affected by the condition of the tires.  Be sure to equip the vehicle with four tyres of the same size and type.
• A full-time All Wheel Drive vehicle can- not be towed by an ordinary tow truck. Make sure that the vehicle is placed on a flatbed truck for moving.

WARNING

All Wheel Drive (AWD) driving

• Avoid high cornering speed.
• Do not make quick steering wheel movements, such as sharp lane changes or fast, sharp turns.
• The risk of rollover is greatly increased if you lose control of your vehicle at high speed.
• In a collision, an unbelted person is significantly more likely to die compared to a person wearing a seat belt.
• Loss of control often occurs if two or more wheels drop off the roadway and the driver over-steers to re-enter the roadway. In the event your vehicle leaves the roadway, do not steer sharply. Instead, slow down before pulling back into the travel lanes.

CAUTION

Mud or snow
If one of the front or rear wheels begins to spin in mud, snow, etc. the vehicle can sometimes be driven out by engaging the accelerator pedal further; however, avoid running the engine continuously at high rpm because doing so could damage the AWD system.

2024 KIA Telluride Specs, Price, Features, Mileage And Review

Driving in sand or mud

• Maintain slow and constant speed. Operate the accelerator pedal slowly to ensure safe driving (wheel-slip prevention).
• Use tyre chains when driving in mud if necessary.
• Keep sufficient distance between your vehicle and the vehicle in front of you.
• Reduce vehicle speed and always check the road condition.
• Avoid speeding, rapid acceleration, sudden brake applications, and sharp turns to prevent getting stuck.
• When the vehicle is stuck in the snow, sand or mud, the tyres may not operate.
• This is to protect the transmission and not a malfunction.

NOTICE
Moving the car forcibly to get out of mud or sand can cause damage/overheating of the engine or damage/break-down of the transaxle, the differential or 4WD system as well as damage to tyres. If excessive wheel slip occurs after entering a sandy/muddy road, the vehi-cle may fall into the sand/mud. When it happens, put a stone or a tree branch under the tyre, and then try to pull out the car, or try to get it unstuck by repeatedly moving forwards and backwards.

WARNING
Your vehicle is equipped with tyres designed to provide a safe ride and handling capability. Do not use tyres and wheels that are different in size and type from the originally installed ones. It can affect the safety and performance of your vehicle, which could lead to steering failure or rollover and serious injury. When replacing the tyres, be sure to equip all four tyres with the tyre and wheel of the same size, type, tread, brand and load-carrying capacity.

WARNING

Jacked vehicle
While the full-time AWD vehicle is being raised on a jack, never start the engine or cause the tyres to rotate.
There is the danger that rotating tyres touching the ground could cause the vehicle to go off the jack and jump forward causing serious injury or death.

• Full-time AWD vehicles must be tested on a special four-wheel chassis dynamometer.

NOTICE
Never engage the parking brake while performing these tests.

• A full-time AWD vehicle should not be tested on an FWD roll tester. If a FWD roll tester must be used, perform the following:
  
  

1. Check the tyre pressures recommended for your vehicle.
2. Place the front wheels on the roll tester (1) for a speedometer test as shown in the illustration.
3. Release the parking brake.
4. Place the rear wheels on the temporary free roller (2) as shown in the illustration.

WARNING

Dynamometer testing
Keep away from the front of the vehicle while the vehicle is in gear on the dynamometer. This is very dangerous as the vehicle can jump forward and cause serious injury or death.

CAUTION

• When lifting the vehicle, do not operate the front and rear wheels separately. All four wheels should be operated.
• If you need to operate the front wheel and rear wheel when lifting the vehicle, you should release the parking brake.

FAQs

Useful Links

View Full PDF: 2024 Kia Telluride Owner’s Manual | Auto User Guide

2024 KIA Telluride Specs, Price, Features, Mileage And Review

2024 Kia Telluride Engine Oil User Guide