2024 Lincoln Aviator Warning Lights and Indicator User Manual
With the warning lights and indications of the 2024 Lincoln Aviator leading drivers through a smooth transition of luxury and technology, you may step into the future of automobile safety. From the subtle glow of the engine alarms to the urgent indications of the brake system, every light conveys vital information for safe travel. Discover the intuitive meaning behind these signs to guarantee clarity and comfort on every trip.
2023 – 2024 LINCOLN Aviator Specs, Price, Features, Mileage and Review
LINCOLN WARNING INDICATORS
The following warning lamps and indicators alert you to a vehicle condition that may become serious. Some lamps illuminate when you start your vehicle to make sure they work. If any lamps remain on after starting your vehicle, refer to the respective system warning lamp for further information. Depending on your vehicle options and instrument cluster type, not all warning lamps and indicators shown are available.
Note: Some warning indicators appear in the instrument cluster and function the same as a warning lamp, but do not display when you start your vehicle.
Adaptive Cruise Control (If Equipped)
The speed control system indicator light changes color to indicate what mode the system is in.
On (white light): Illuminates when you switch on the adaptive cruise control system. Turns off when the speed control system is turned off.
Engaged (green light): Illuminates when you engage the adaptive cruise control system. Turns off when you disengage the speed control system.
Anti-Lock Brake System
If it illuminates when you are driving, this indicates a system error. You continue to have the normal braking (without ABS) unless the brake system warning lamp also illuminates. Have the system checked as soon as possible.
Automatic High Beam Control
Illuminates when this feature is on.
Auto Hold Active
Illuminates when the system holds your vehicle stationary.
Auto Hold Unavailable
Illuminates when the system is on, but unavailable to hold your vehicle stationary.
Auto Start-stop (If Equipped)
Illuminates when the engine shuts down or in conjunction with a message.
Battery
If it illuminates while driving, it indicates a system error. Switch off all unnecessary electrical equipment and have the system checked immediately.
Blind Spot Monitor
Illuminates when you switch this feature off or in conjunction with a message.
Brake System Warning Lamp
WARNING: Driving your vehicle with the warning lamp on is dangerous. A significant decrease in braking performance may occur. It may take you longer to stop your vehicle. Have your vehicle checked as soon as possible. Driving extended distances with the parking brake engaged can cause brake failure and the risk of personal injury.
Note: Indicators vary depending on region.
This lamp is a dual function lamp and illuminates when:
- You apply the parking brake with the ignition on.
- Your vehicle has a brake fault or low brake fluid level, regardless of parking brake position.
If the lamp illuminates when you are moving, you may have the parking brake applied. Make sure the parking brake is off. Have your vehicle checked as soon as possible if the lamp continues to illuminate.
Cruise Control
Illuminates when you switch this feature on.
Direction Indicator
Illuminates when you switch on the left-hand or right-hand direction indicator or the hazard flasher. If the indicators stay on or flash faster, check for a burned-out bulb.
Distance Alert
Flashes when your vehicle is rapidly approaching another vehicle or a pedestrian within your driving path.
Door Ajar
Illuminates when the ignition is on and any door is not completely closed.
Electric Park Brake
Illuminates or flashes when the electric parking brake has a system error.
Engine or Motor Coolant Temperature
Illuminates when your vehicle coolant temperature is high. Stop your vehicle as soon as it is safe to do so. Allow the engine to cool.
Engine Oil
If it illuminates with the engine running or when you are driving, this indicates a system error. Stop your vehicle as soon as it is safe to do so and switch the engine off. Check the engine oil level.
Note: Do not resume your journey if it illuminates despite the level being correct. Have the system checked as soon as possible.
Fasten Seatbelt
Illuminates and a tone sounds to remind you to fasten your seatbelt.
Fasten Rear Seatbelt
Illuminates and a tone sounds to signal the rear seatbelts are not fastened.
Front Airbag
If it fails to illuminate when you start your vehicle, continues to flash or remains on, it indicates there is a system error. Have the system checked as soon as possible.
Front Fog Lamps (If Equipped)
Illuminates when you switch the front fog lamps on.
High Beam
Illuminates when you switch the high beam headlamps on. It flashes when you use the headlamp flasher.
Hill Descent (If Equipped)
Illuminates when you switch hill descent on.
Hood Ajar
Illuminates when the ignition is on and the hood is not completely closed.
Lamps On
Illuminates when you switch the low beam headlamps or the parking lamps on.
Liftgate Ajar
Illuminates when the liftgate is not completely closed.
Low Beam Warning
Illuminates when the low beam headlamp bulb is not functioning properly.
Low Fuel Level
Illuminates when the fuel level is low or the fuel tank is nearly empty. Refuel as soon as possible.
Low Tire Pressure Warning
Illuminates when your tire pressure is low. If the lamp remains on with the engine running or when driving, check your tire pressure as soon as possible. It also illuminates momentarily when you switch the ignition on to confirm the lamp is functional. If it does not illuminate when you switch the ignition on, or begins to flash at any time, have the system checked as soon as possible.
Low Washer Fluid
Illuminates when the windshield washer fluid is low.
Powertrain Fault
Illuminates when the system detects a powertrain or an 4WD fault. Have the system checked as soon as possible.
Ready to Drive (If Equipped)
Illuminates when you have switched on your vehicle and it is ready to drive. A corresponding message may appear stating ready to drive.
Service Engine Soon
It illuminates when you switch the ignition on prior to engine start to check the bulb and to indicate whether your vehicle is ready for Inspection and Maintenance (I/M) testing. Normally, it illuminates until the engine is cranked and automatically turns off if no system errors are present. However, if after 15 seconds it flashes eight times, this indicates that your vehicle is not ready for Inspection and Maintenance (I/M) testing. If it illuminates when the engine is running this indicates a system error. The onboard diagnostics system has detected an error in the vehicle emission control system. If it flashes, an engine misfire may be occurring. Continuing to drive your vehicle may cause reduced power or the engine to stop. Failure to respond to the warning lamp may cause component damage not covered by the vehicle Warranty. Have your vehicle checked as soon as possible.
Stability Control
It flashes when the system is active. If it remains illuminated or does not illuminate when you switch the ignition on, this indicates a system error. During a system error the system switches off. Have the system checked immediately.
Stability Control Off
Illuminates when you switch the system off. It goes out when you switch the system back on or when you switch the ignition off.
Stop Safely Now
Illuminates if your vehicle has an electrical component fault or failure that could cause your vehicle to shutdown or enter into a limited operating mode. You may also see a message.
Tow Haul Indicator (If Equipped)
Illuminates when the system switches on.
Vehicle Plugged in (If Equipped)
Illuminates when your vehicle is plugged in. A corresponding message may display after attempting to start your vehicle.
AUDIBLE WARNINGS AND INDICATORS OWNER’S MANUAL
Keyless Warning Alert
The horn will sound twice when you exit your vehicle with the intelligent access key and your vehicle is in RUN, indicating your vehicle is still on.
Headlamps On Warning Chime
Sounds when you have left the headlamps or parking lamps on and open the driver door with the vehicle off.
Parking Brake On Warning Chime
Sounds when you have left the parking brake on and drive your vehicle. If the warning chime remains on after you have released the parking brake, have the system checked by your authorized dealer immediately.
FAQs
The yellow check engine light typically signals an issue with the engine or its components, such as a malfunctioning sensor or emission system problem.
The red brake system indicator usually indicates a problem with the vehicle’s braking system, such as low brake fluid levels or brake pad wear.
A flashing oil pressure light may suggest low oil pressure, potentially caused by insufficient oil levels or a malfunctioning oil pump.
The battery light could indicate issues with the vehicle’s charging system, such as a failing alternator or a loose battery connection.
The ABS warning light alerts drivers to a problem with the Anti-lock Braking System, which could compromise braking performance in certain conditions.
The TPMS light illuminates when one or more tires have low air pressure, potentially indicating a puncture or underinflation.
The coolant temperature warning light warns of engine overheating, which may result from low coolant levels, a malfunctioning thermostat, or a cooling system issue.
The red oil can symbol usually indicates low engine oil pressure, requiring immediate attention to prevent engine damage.
The airbag warning light alerts drivers to a potential problem with the vehicle’s airbag system, necessitating inspection and repair to ensure proper function in the event of a collision.
The yellow wrench light typically indicates a fault with the vehicle’s powertrain or electronic throttle control system, requiring diagnostic attention.
The door ajar light indicates that one or more doors are not fully closed, potentially compromising vehicle security and safety.
The red seat belt reminder light reminds occupants to fasten their seat belts for enhanced safety while driving.
The fuel level warning light indicates that the vehicle’s fuel level is low, prompting the driver to refuel to avoid running out of gas.
The green high beam indicator confirms when the vehicle’s high beam headlights are activated, providing enhanced visibility in low-light conditions.
The traction control off light indicates that the vehicle’s traction control system has been manually deactivated, potentially allowing for wheelspin in certain driving conditions.
Useful Link
2023 – 2024 LINCOLN Aviator Specs, Price, Features, Mileage and Review
