2024 Nissan Leaf Blind Spot Sensors User Manual
Modern blind spot sensors are a feature of the 2024 Nissan Leaf that improves road safety and convenience. These sensors warn the driver of potential hazards before changing lanes by using state-of-the-art technology to identify vehicles in adjacent lanes. The blind spot sensors enhance overall driving awareness and provide piece of mind with their accurate monitoring capabilities.
2024 Nissan Leaf Specs, Price, Features and Mileage (Brochure)
Nissan BLIND SPOT WARNING (BSW)
WARNING
Failure to follow the warnings and instructions for proper use of the BSW system could result in serious injury or death.
- The BSW system is not a replacement for proper driving procedures and is not designed to prevent contact with vehicles or objects. When changing lanes, always use the side and rear mirrors and turn and look in the direction your vehicle will move to ensure it is safe to change lanes. Never rely solely on the BSW system.
The BSW system helps alert the driver of other vehicles in adjacent lanes when changing lanes.
The BSW system uses radar sensor 1 installed near the rear bumper to detect other vehicles in an adjacent lane.
Detection zone
The radar sensors can detect vehicles on either side of your vehicle within the detection zone shown as illustrated. This detection zone starts from the outside mirror of your vehicle and extends approximately 10 ft (3.0 m) behind the rear bumper, and approximately 10 ft (3.0 m) sideways.
BSW SYSTEM OPERATION
- Side Indicator Light
- BSW Indicator
The BSW system operates above approxi-mately 20 mph (32 km/h).
If the radar sensors detect a vehicle in the detection zone, the side indicator light
- illuminates. If the turn signal is then acti-vated, the system chimes (twice), the side indicator light flashes, and the BSW indicator
- illuminates (yellow) in the vehicle information display. The side indicator light continues to flash until the detected ve-hicle leaves the detection zone.
The side indicator light illuminates for a few seconds when the power switch is placed in the ON position.
If a vehicle comes into the detection zone after the driver activates the turn signal, then only the side indicator light flashes and no chime sounds. For additional information, see “BSW driving situations”
The BSW system automatically turns on every time the EV system is started, as long as it is activated using the settings menu on the vehicle information display.
HOW TO ENABLE/DISABLE THE BSW SYSTEM
Perform the following steps to enable or disable the BSW system:
- Press the
button until “Settings” displays in the vehicle information display.
Use the
button to select “Driver Assistance.” Then press the OK button. - Select “Blind Spot” and press the OK
button. - Select “Blind Spot Warning” and use the OK button to turn the system on or off.
NOTE
When enabling/disabling the system, the system will retain current settings even if the EV system is restarted.
BSW SYSTEM LIMITATIONS Owner’s Manual
WARNING
Listed below are the system limitations for the BSW system. Failure to operate the vehicle in accordance with these system limitations could result in serious injury or death.
- The BSW system cannot detect all vehicles under all conditions.
- The radar sensors may not be able to detect and activate BSW when certain objects are present such as:
- Pedestrian, bicycles, animals.
- Vehicles such as motorcycles, low-height vehicles, or high-ground clearance vehicles.
- Oncoming vehicles.
- Vehicles remaining in the detection zone when you accelerate from a stop.
- A vehicle merging into an adjacent lane at a speed approximately the same as your vehicle.
- A vehicle approaching rapidly from behind.
- A vehicle which your vehicle over-takes rapidly.
- A vehicle that passes through the detection zone quickly.
When overtaking several vehicles in a row, the vehicles after the first vehicle may not be detected if they are traveling close together. - Do not attach stickers (including transparent material), install accessories or apply additional paint near the radar sensors. These conditions may reduce the ability of the radar to detect other vehicles.
- Excessive noise (for example, audio system volume, open vehicle window) will interfere with the chime sound, and it may not be heard.
Illustration 1 – Approaching from behind
BSW DRIVING SITUATIONS
Illustration 1: The side indicator light illuminates if a vehicle enters the detection zone from behind in an adjacent lane.
Indicator on
Indicator off
Indicator flashing
NOTE
The radar sensors may not detect vehicles which are approaching rapidly from behind.
Illustration2–Approaching from behind Another vehicle approached from behind
Illustration 2: If the driver activates the turn signal when another vehicle is in the detection zone, then the system chimes (twice) and the side indicator light flashes.
NOTE
- The radar sensors may not detect vehicles which are approaching rapidly from behind.
- If the driver activates the turn signal before a vehicle enters the detection zone, the side indicator light will flash but no chime will sound when the other vehicle is detected.
Illustration3–Overtaking another vehicle
Overtaking another vehicle
Illustration 3: The side indicator light illuminates if you overtake a vehicle and that vehicle stays in the detection zone for approximately 2 seconds.
Illustration4–Overtaking another vehicle
Illustration 4: If the driver activates the turn signal while another vehicle is in the detection zone, then the system chimes (twice) and the side indicator light flashes.
NOTE
- When overtaking several vehicles in a row, the vehicles after the first vehicle may not be detected if they are traveling close together.
- The radar sensors may not detect slower-moving vehicles if they are passed quickly.
- If the driver activates the turn signal before a vehicle enters the detection zone, the side indicator light will flash but no chime will sound when the other vehicle is detected.
Illustration 5 – Entering from the side
Entering from the side
Illustration 5: The side indicator light illuminates if a vehicle enters the detection zone from either side.
Illustration 6 – Entering from the side
Illustration 6: If the driver activates the turn signal while another vehicle is in the detection zone, then the system chimes (twice) and the side indicator light flashes.
NOTE
- If the driver activates the turn signal before a vehicle enters the detection zone, the side indicator light will flash but no chime will sound when the other vehicle is detected.
- The radar sensors may not detect a vehicle which is traveling at about the same speed as your vehicle when it enters the detection zone.
SYSTEM TEMPORARILY UNAVAILABLE
When radar blockage is detected, the system will be deactivated automatically. The BSW indicator 1O will blink (yellow) in the vehicle information display. The indicator next to “Blindspot” in the “Driving Aids” menu 2O will also blink (yellow).
The system is not available until the conditions no longer exist.
The radar sensors may be blocked by temporary ambient conditions such as splashing water, mist or fog. The blocked condition may also be caused by objects such as ice, frost or dirt obstructing the radar sensors.
NOTE
If the BSW system stops working, the RCTA system will also stop working.
Action to take
When the above conditions no longer exist, the system will resume automatically.
Malfunction
If the BSW system malfunctions, it will turn off automatically. The BSW indicator will illu-minate (yellow) in the vehicle information display. The indicator next to “Blindspot” in the “Driving Aids” menu will also illuminate (yellow).
NOTE
If the BSW system stops working, the RCTA system will also stop working.
Action to take
Stop the vehicle in a safe location, place the vehicle in the P (Park) position, turn the EV system off and restart the EV system. If the indicators continue to appear, have the system checked. It is recommended that you visit a NISSAN-certified LEAF dealer for this service.
FAQs
Radar- based blind spot sensors are included with the 2024 Nissan Leaf.
The 2024 Nissan Leaf’s blind spot sensors are made to function at all speeds.
When a car is detected in the blind spot, the 2024 Nissan Leaf’s blind spot sensors sound an alert and provide visuals.
It is possible to modify the blind spot sensors’ sensitivity in the 2024 Nissan Leaf by going into the settings.
Although the blind spot sensors in the 2024 Nissan Leaf are made to function effectively in a variety of weather situations, severe weather may have an impact on how well they function.
The blind spot sensors in the 2024 Nissan Leaf are primarily intended to detect vehicles, but in some circumstances, they may also pick up on larger things like bicycles or pedestrians.
No, the 2024 Nissan Leaf’s blind spot sensors are only functional when the car is moving.
Indeed, blind spot sensors are included on the left and right sides of the 2024 Nissan Leaf.
The 2024 Nissan Leaf’s blind spot sensors are indeed deactivable via the settings.
No, routine maintenance is not necessary for the blind spot sensors in the 2024 Nissan Leaf, though it is advised to maintain them clean for best results.
The blind spot sensors in the 2024 Nissan Leaf can greatly lower the chance of collisions, but they cannot replace cautious driving techniques.
The 2024 Nissan Leaf’s blind spot sensors might not be able to identify cars in some circumstances, such when they’re traveling very fast.
The 2024 Nissan Leaf’s blind spot sensors are still capable of detecting cars when a trailer is being towed, albeit the efficiency of the system may change based on the size and shape of the trailer.
Can I get blind spot sensors installed in a 2024 Nissan Leaf that doesn’t come with them?
In a 2024 Nissan Leaf, aftermarket blind spot sensors can be added, but for correct installation, it’s advised to speak with a qualified mechanic.
Yes, the 2024 Nissan Leaf’s blind spot sensors are normally covered by the warranty; nevertheless, for precise coverage, it’s best to review the warranty details.
Useful Links
View Full PDF: 2024 Nissan Leaf User Manual|Auto User Guide
2024 Nissan Leaf Specs, Price, Features and Mileage (Brochure)
